RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No CAT 6 Cable For Indoor Use ( 65 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Cate 6 cable conforming to Yes * 1/18 ANSI/TIA/EIA-568 C.2 latest or ISO/IEC:11801 latest Cable category: Category 6 Unshield ed/Unshielded twisted pair or Category 6 Foiled/Unshileded twisted pair or Category 6 Shielded Foiled Twisted Pair CAT6 U/UTP CAT6 U/UTP Cable colour Grey White
RequiredBlue
RequiredRed
RequiredYellow
RequiredGreen
RequiredGrey
RequiredViolet Conductor diameter 0.57 mm (23 AWG) 0.57 mm (23 AWG) Conductor count (in Nos.
Required) 8 * Length of cable in a bundle (Mtrs) 305 mtrs. 305 mtrs. CONSTRUCTIONAL "CAT6 Cable can transmit data at 1000 Mbps (~1 Gigabit per second) with a frequency of 250 MHz and suitable for 10BASE-T
Required100BASE-TX Fast Ethernet and 1000BASE-T 1000BASE-TX (Gigabit Ethernet)." Yes * Maximum DC resistance - in Ohm/Km Max. 100 Ohm/Km * Conductor Materail Bare Copper * Conductor Insulation Material Polyethylene * Cable jacket material Low Smoke zero halogen (LSZH) Low Smoke zero halogen (LSZH) Conductor stranding Solid * Cable should have internal cross separator Yes * Storage temperature range minus 20 degree C to plus 60 degree C * Operating temperature range minus 20 degree C to plus 60 degree C * Each meter printed with sequential length counter of cable apart from marking Yes * 2/18 requirement as per relevant specifications and certifications CERTIFICATIONS Category 6 cable shall have valid verified certificate from ERTL/ETL/Intertek/3P GHMT/Delta/UL as per CAT 6 standards ANSI/TIA/EIA-568 C.2 latest or ISO/IEC:11801 latest Yes * If ''Yes" Certificate Number - Must declare - * UL Marking on Cable Yes Yes Availability of complete and satisfactory type test Report from Central Government NABL/ILAC accredited laboratory to conformity of the Specification Yes * Test report Number - * Report date - * Name and address of Lab - * All the test reports and certificates shall furnish to the buyer/consignee on demand Yes * * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
