SEG/II/PDC Tech01 of 2023-24 Facelifting of Superintending Engineer room by way of wooden panelling and double side laminated board for ceiling alongwith installation of 200 amp MCCB alongwith bus-bar for distribution of supply for replacement

Amount

Providing and fixing of laminated glossy wood panels of sizes on walls along with fittings, cornices & beadings concave type (144 Running feets) , skirtings, adhesives, plywood 10 mm waterproof ply BWR Grade conforming to IS 303 : 1989, for cladding with necessary screws, complete job including carriage. The job includes Providing ply /wood work in frames of false ceiling, partitions etc. sawn and fixed in position :

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part-I : 2011 (Board with BIS certification marks) or heat reflective false ceiling

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 500x500 mm

Removing dry or oil bound distemper, water proofing cement paint andthe like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work.

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 (1 cement : 4 fine sand)

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications:Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class kail wood

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of : (Note:- Butt hinges and necessary screws shall be paid separately) 12 mm thick plain grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848:

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Storage Cabinet : Providing and erecting in position full height storage cabinet 450 mm deep or as indicated on the drawing to be made out of 19mm thk.marine proof board on all the sides and 6.0 mm thk. Marine proof ply at the back side with openable shutters below the same with one intermediate shelve of 19.0 mm marine board. The shutters to be made out of 19 mm thk. Outer surface of shutters shall have 1 mm thick heavy duty textured laminate mica fixed/glued to the shutters .The outer edges shall be lipped with 6 mm thick beading and and , including hinges, ball catch, handles, locks etc. complete as per the direction. The exposed edges shall finished with 5.0 mm thk. steam beach wood leaping duly spirit polish. Cabinet shall be finished with 4mm thks.The inner surface the storage shall have 1 mm thick laminate of green/century/kitply.All the wood work shall be given 2 coats of anti termite treatment before execution.

Providing and fixing of good quality textured 3D wall paper as per design and make to be approved by Engineer Incahrge Quantity= 2 x 1.85 x 2.8 + 1.45 x 2.8 = 14.42

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer- incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe, 16mm OD(SDR-7.4)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing brass bib cock of approved quality. 20 mm nominal bore

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

uPVC pipes (working pressure 4 kg / cm2 ) Single socketed pipe 110 mm dia

Wiring with 4.0 sq.mm FRLSB395:B571 PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 4.0 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Make:- KEI/HPL/PARAMOUNT

Wiring with 1.5 sq.mm FRLSB395:B571 PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Make:- KEI/HPL/PARAMOUNT

SITC of pre-wired 12 Watt Surface Mounted LED Ceiling Light Fitting including connections with 1.5 sq.mm FR PVC insulated copper conductor single core cable and earthing etc as required.The Light Fixture should have System Efficacy of 85 Lumens/Watt. (PHILIPS/WIPRO/BAJAJ) Note:- The Vendor must supply LM-79 and LM-80 Reports for the Product.

Providing and fixing on wall 50 LTRS Electric Geyser with ABS Body. Makes:- Bajaj/ Crompton/ Jaquar/Hindware or equivalent with carriage

Supplying and fixing Stepped Type Electronic Fan Regulator on the existing Modular Plate Switch Box including Connections but Excluding Modular Plate etc. as Required. Makes:(NORTHWEST/SCHNEIDER/L&T)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. Makes:_(NORTHWEST/SCHNEIDER/L&T)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. Makes:_(NORTHWEST/SCHNEIDER/L&T)

Supply of AC 230/250 Volts, 50 Hz exhaust fan with louveres of Following Sizes including connection etc. complete as required . Makes:-(WADBROS/CATA/VENTS/ EXPLAIR) 150 mm

Providing and fixing of laminated wood panels of sizes on walls along with fittings, cornices & beadings concave type (144 Running feets) , skirtings, adhesives, plywood 10 mm waterproof ply BWR Grade conforming to IS 303 : 1989, for cladding with necessary screws, complete job including carriage

Supply & Installation of 20KVA 3 Phase Servo automatic, 200A MCCb, 200A Bus Bar copper, 30 Mtr 3.5 Core 35 SQMM Cable, 16 Way SPN Metalic DB Box , 04 No 1050 mm ceiling Fans, 6-32 A MCB 6 Nos, 63 A DP MCB 1 No, 32 A DP MCB 2 No, 12 Watt 6500K Surface LED Lights 6 No & 1 No 1.5HP mono block pump . The job shall include connecting service cable from nearby transformer by way of segregating office connection from rest of the building & connecting MCB'sin existing system and replacing DB Box by new one.

ADIL BASHIR GILKAR