Widening Strengthening of Khurja Pahasu Chattari road SH-63 in District Bulandshahar Ch 000 to 34 665

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. (Carted earth with lead upto 1.0km) Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work. Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. MORT&H Specification 401 Sr No 4.1 Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. MORT&H Specification 406 Sr No 4.14 Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 to 1.00 kg/sqm using mechanical means. Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

(Dense Graded Bituminous Macadam Grading 1) Providing and laying dense graded bituminous macadam with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG 30 @ 4 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. MORT&H Specification 503 Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

(Dense Graded Bituminous Macadam Grading 2) Providing and laying dense graded bituminous macadam with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG 40 @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. MORT&H Specification 503 Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

(Bituminous Concrete Grading 2) Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

Construction of dry lean cement concrete Sub-base over a prepared sub-grade with coarse and fine aggregates conforming to IS:383, the size of coarse aggregate not exceeding 25 mm, aggregate-cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content no to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength no to be less than 10 MPa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing. Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

Construction of un-reinforced, dowel jointed, plain cement concrete pavement (M30 grade) over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the servicable material with all lifts and lead of 1000 metres. Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

Brick masonry work in 1:3 in sub-structure complete excluding pointing and plastering, as per drawing and Technical Specifications Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

Plastering with cement mortar (1:3 ) on brick work in sub-structure as per Technical Specifications Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

RCC Grade M25 using batching plant transit mixer & Concrete pump MORT&H Specification 1500,1700 & 2100 Sr No 12.08 Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

Supply and laying of NP-3 s/s 1000mm dia Hume pipe culvert including cost of hume pipe, cartage, fixing of proper alignment. Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

Supply and laying of NP-3 s/s 600mm dia Hume pipe culvert including cost of hume pipe, cartage, fixing of proper alignment. Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

RCC Grade M20 using batching plant transit mixer & Concrete pump MORT&H Specification 1500,1700 & 2200 Sr No 13.05 RCC Grade M20 (DRAIN) Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

RCC Grade M30 using batching plant & concrete pump Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications MORT&H Specification 1600,2200 Sr No 13.6 Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

Providing and laying Cement concrete wearing coat M-30 grade including reinfocement complete as per drawing and Technical Specifications. Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

Providing weep holes in Brick masonry/ Plain Reinforced concrete abutment, wing wall/ return wall with 100mm dia AC pipe, extending through the full width of the structure with slope of 1V:20H towards drawing face. Complete as per drawing and Technical Specifications. Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, of which payment shall be made seperately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-charge. (as per DSR Vol-II SI.No. 16.83) Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the sand with fine sand etc. all complete as per the direction of Engineer-in-charge. (as per DSR Vol-II SI.No. 16.84) Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

Providing and laying factory made chamfered edge Cement Concrete paver blocks )in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. (as per DSR Vol-II SI.No. 16.91.2) 80mm thick C.C. paver block of M-35 grade with approved colour design and pattern.Including cost of all material, labour, T&P, royality, labour cess and all taxes complete but excluding cost of GST

Five Year Maintenance Charge @ 2.50 % as per Current Prevailing GO Dated 17.02.2024 excluding GST

Please Enable Macros to View BoQ information