Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹62.6 LAccepted-AOC | L1 | Accepted-AOC Tharav No 55 Date 3/3/2022 |
Tender Value
₹15 L
EMD Value
₹20,000
Closing Date
18 Feb 2022, 4:00 pmClosed
The Chief Officer
pen municipal council
Repairing and maintaince of electrical machine and equipment at pimpaldoh jack well and water treatment plant.
2021_DMA_747786_2
PMC/WATER/2021/2132
Open Tender
Miscellaneous Services
Item Rate
365 days
pen municipal council
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,500
₹20,000
19 Jun 2023
10 Feb 2022
21 Feb 2022
10 Feb 2022
18 Feb 2022
10 Feb 2022
Amount
Reparing of 100 HP VHS type Motor
Removing and Dismaintling of 100 HP VHS type Motor with allied equipments etc complete
Complete rewinding of motor with quality copper wire 'F' class insulation including heating, varnishing, backing and skilled labour charges etc complete with testing of site of work .
Supply of Following spares for above pumpset
Rotor balancing
Cooling fan
best quality grease Ap3
140 No. bearing oil
Motor top bearing
Motor bottom bearing
Motor bottom / top Shaft welding turning
Oil seal
best quality grease Ap3
140 No. bearing oil
Motor top bearing
Motor bottom bearing
Motor bottom / top Shaft welding turning
Oil seal
Motor lock rathet check lock key complete bushing S.S & etc.
Brass pipe & Nipple etc complete
Terminal plate
Brass Lugs
Motor housing cover top
Motor housing cover bottom
Bearing checknut
Cerclip
Bearing Cap
Transportation of motor with loading and unloading by crane with too and fromsite etc complete
Erection and assembling of 100 HP VHS type motor with allied equipments etc complete .
Repairing of 100 HP V.T Pumpset.
Removing and Dismaintling of 100 HP V.T pump set with allied equipments etc complete
Repairing of vertical Turbine pump with turning, grinding and polishing of bowl assembly and required spares with skilled labour charges etc. complete
Supply of Following spares for above pumpset
Stuffing box bushing bronze
Gland sleeve S.S.
Rubber Bush
Ratchet as per sample
Neck ring bronze
Bowl bush
Bowl turning and surface counter and top
Impeller
Impeller collect
Impeller turning
Impeller balancing
Top shaft S.S
Column pipe EN - 8
Column shaft
Shaft sleeve
Special strengthen Heavy Duty nut bolts for total pump set
Rubber Packing
Pump Foundation plate surfacing and Finishing etc. complete
Column pipe repair with welding of ribs to MS Flange with machining etc
coupling Socket
Spyder
Spyder rubber
pump Shaft
Complete servicing of 100 HP V.T motor with checking insulation winding, varnishing and rotor balancing etc complete .
Transportation of V.T Pumpset with loading and unloading by crane with too and from site etc complete
Erection and assembling of 100 HP V.T Pumpset with bowl assembly, discharge head, coloumn pipe, line shaft with allied equipments etc complete .
Reparing of 120 HP VHS type Motor
Removing and Dismaintling of 120 HP VHS type Motor with allied equipments etc complete
Complete rewinding of motor with quality copper wire 'F' class insulation including heating, varnishing, backing and skilled labour charges etc complete with testing of site of work .
Supply of Following spares for above pumpset
Rotor balancing
Cooling fan
best quality grease Ap3
140 No. bearing oil
Motor top bearing
Motor bottom bearing
Motor bottom / top Shaft welding turning
Oil seal
Motor lock rathet check lock key complete bushing S.S & etc.
Brass pipe & Nipple etc complete
Terminal
Brass Lugs
Motor housing cover top
Motor housing cover bottom
Bearing checknut
Cerclip
bearing Cap
Transportation of motor with loading and unloading by crane with too and fromsite etc complete
Erection and assembling of 120 HP VHS type motor with allied equipments etc complete .
Repairing of 120 HP V.T Pumpset
Removing and Dismaintling of 120 HP V.T pump set with allied equipments etc complete
Repairing of vertical Turbine pump with turning, grinding and polishing of bowl assembly and required spares with skilled labour charges etc. complete
Supply of Following spares for above pumpset
Stuffing box bushing bronze
Gland sleeve S.S.
Rubber Bush
Ratchet as per sample
Neck ring bronze
Bowl bush
Bowl turning and surface counter and top
Impeller
Impeller collect
Impeller turning
Impeller balancing
Top shaft S.S
Column pipe EN - 8
Column shaft
Shaft sleeve
Special strengthen Heavy Duty nut bolts for total pump set
Rubber Packing
Pump Foundation plate surfacing and Finishing etc. complete
Column pipe repair with welding of ribs to MS Flange with machining etc
coupling Socket
Spyder
Spyder rubber
Pump Shaft
Complete servicing of 120 HP V.T motor with checking insulation winding, varnishing and rotor balancing etc complete .
Transportation of V.T Pumpset with loading and unloading by crane with too and from site etc complete
Erection and assembling of 120 HP V.T Pumpset with bowl assembly, discharge head, coloumn pipe, line shaft with allied equipments etc complete .
Reparing of 75 HP VHS type Motor
Removing and Dismaintling of 75 HP VHS type Motor with allied equipments etc complete
Complete rewinding of motor with quality copper wire 'F' class insulation including heating, varnishing, backing and skilled labour charges etc complete with testing of site of work .
Supply of Following spares for above pumpset
Rotor balancing
Cooling fan
best quality grease Ap3
Motor top bearing
Motor bottom bearing
Motor bottom / top Shaft welding turning
Oil seal
Terminal plate
Brass Lugs
Motor housing cover top
Motor housing cover bottom
Bearing checknut
Cerclip
Bearing Cap
Transportation of motor with loading and unloading by crane with too and fromsite etc complete
Erection and assembling of 75HP VHS type motor with allied equipments etc complete .
Repairing of 75 HP Pumpset.
Removing and Dismaintling of 75 HP V.T pump set with allied equipments etc complete
Supply of Following spares for above pumpset
Gland sleeve S.S.
Brass Bush
Neck ring bronze
Impeller
Impeller checknut
Impeller turning
Impeller balancing
Shaft sleeve
Special strengthen Heavy Duty nut bolts for total pump set
Rubber Packing
Pump Foundation plate surfacing and Finishing etc. complete
coupling rubber
Pump Shaft
Pump Bearing frontside
Pump Bearing backside
Pump Cover slive front
Pump Cover Slive back
Gland cap
Bearing Checknut
Transportation of V.T Pumpset with loading and unloading by crane with too and from site etc complete
Erection and assembling of 75 HP V.T Pumpset with bowl assembly, discharge head, coloumn pipe, line shaft with allied equipments etc complete .
Repairing work for 5 HP Submersible Motor pump set
Dismantaling & Erection of 5 H P Submersible Pump set with Impeller & transportation from site to workshop & return etc
Rewinding of submersible Motor pump with required following spares with skilled labour charge etc
a) Rotter balancing
b) Motor Bush top
c) Motor Bush bottom
d)Thrust plate Top & Bottom
e) Pump Shaft sleeve S/S
f) Pump Shaft sleeve S/S New
g) Pump Shaft Balance
h) pump Impeller
i) Impeller Neck Ring
j) Impeller Balance
l) oil seal & cap
m) pump diffuser
n) coupling Bush
Repairing work for 7.5 HP Submersible Motor pump set
Dismantaling & Erection of 7.5 H P Submersible Pump set with Impeller & transportation from site to workshop & return etc
Rewinding of submersible Motor pump with required following spares with skilled labour charge etc
a) Rotter balancing
b) Motor Bush top
c) Motor Bush bottom
d)Thrust plate Top & Bottom
e) Pump Shaft sleeve S/S
f) Pump Shaft sleeve S/S New
g) Pump Shaft Balance
h) pump Impeller
i) Impeller Neck Ring
j) Impeller Balance
l) oil seal & cap
m) pump diffuser
n) coupling Bush
Repairing work for 20 HP Submersible Motor pump set
Dismantaling & Erection of 20 H P Submersible Pump set with Impeller & transportation from site to workshop & return etc
Rewinding of submersible Motor pump with required following spares with skilled labour charge etc
a) Rotter balancing
b) Motor Bush top
c) Motor Bush bottom
d)Thrust plate Top & Bottom
e) Pump Shaft sleeve S/S
f) Pump Shaft sleeve S/S New
g) Pump Shaft Balance
h) pump Impeller
i) Impeller Neck Ring
j) Impeller Balance
l) oil seal & cap
m) pump diffuser
n) coupling Bush
Repairing work for 5 HP Centrifugal Motor pump set
Complete rewinding of Centrifugal motor & Pump with quality copper F Clamp insulation including Air drying , varnishing , backing 7 skilled labaor charge
a) Motor Cooling Fan
b)Rotter Balancing
c) Best Quality grease AP 3
d) Motor Top bearing
e) Motor Bottom bearing
f) Motor top and bottom bushing turning oil seal
g) Oil Seal
h) Motor lock ratchet check nut lock key
i) Bearing check - nut
j) Motor housing Cover Top
k) Motor housing Cover Bottom
l) Motor cannection plate
m)Implier
n)Gland bush
o)Gland Cap
p) Motor cannection lugs
Repairing work for 7.5 HP Centrifugal Motor pump set
Complete rewinding of Centrifugal motor & Pump with quality copper F Clamp insulation including Air drying , varnishing , backing 7 skilled labaor charge
a) Motor Cooling Fan
b)Rotter Balancing
c) Best Quality grease AP 3
d) Motor Top bearing
e) Motor Bottom bearing
f) Motor top and bottom bushing turning oil seal
g) Oil Seal
h) Motor lock ratchet check nut lock key
i) Bearing check - nut
j) Motor housing Cover Top
k) Motor housing Cover Bottom
l) Motor cannection plate
m)Implier
n)Gland bush
o)Gland Cap
p) Motor cannection lugs
Repairing work for 15 HP VHS Motor
Complete rewinding of Centrifugal motor & Pump with quality copper F Clamp insulation including Air drying , varnishing , backing 7 skilled labaor charge
a) Motor Cooling Fan
b)Rotter Balancing
c) Best Quality grease AP 3
d) Bearing Cap
e) Motor Top bearing
f) Motor Bottom bearing
g) Motor top and bottom Shaft Welding Turning
h) Oil Seal
i) Bearing check - nut
j) Motor housing Cover Top
k) Motor housing Cover Bottom
l) Motor cannection plate
m) Motor cannection lugs
Repairing work for 3 HP VHS Motor
Complete rewinding of Centrifugal motor & Pump with quality copper F Clamp insulation including Air drying , varnishing , backing 7 skilled labaor charge
a) Motor Cooling Fan
b)Rotter Balancing
c) Best Quality grease AP 3
d) Bearing Cap
e) Motor Top bearing
f) Motor Bottom bearing
g) Motor top and bottom Shaft Welding Turning
h) Oil Seal
i) Bearing check - nut
j) Motor housing Cover Top
k) Motor housing Cover Bottom
l) Motor cannection plate
m) Motor cannection lugs
Repairing work for 2 HP VHS Motor
Complete rewinding of Centrifugal motor & Pump with quality copper F Clamp insulation including Air drying , varnishing , backing 7 skilled labaor charge
a) Motor Cooling Fan
b)Rotter Balancing
c) Best Quality grease AP 3
d) Bearing Cap
e) Motor Top bearing
f) Motor Bottom bearing
g) Motor top and bottom Shaft Welding Turning
h) Oil Seal
i) Bearing check - nut
j) Motor housing Cover Top
k) Motor housing Cover Bottom
l) Motor cannection plate
m) Motor cannection lugs
All Starter & bearing
Reparing of 100 H.P. Air Brake M.E.I. make A.T.S. starter
Auto transfer rewinding
M.E.I. starter finger
i) Long size finger
ii) Short size finger
iii) Medal halfrounded finger
Starter contact bar with remove finger
Starter novolt coil
Starter disput oil
Transformer oil per liter
100 H.P.Automatic star delta starter
Providing & Fitting main contract set 6 ml L&T make
6 ML spair kit L & T make
Providing & fitting contact set 4 ML L & T make
4 ML spair kit L & T make
Starter Novold coil
Timer coil
150 AMP Realy
HRC Fuse set unit
Contractor legeover swich
Automatic starter Internal wiring
Main Panal Board
625 AMP Main switch make ISI mark
625 AMP Changeover switch ISI mark
400 AMP main switch ISI mark H.R.C.
625 AMP main switch H.R.C. fuse ISI mark
200 AMP main switch H.R.C.fuse ISI mark
3 Core 50 sqmm copper cabal ISI mark
3 Core 70 sqmm copper cabal ISI mark
½ Core 300 sqmm alumunimum cabal ISI mark
3 Core 25 sqmm copper special by submericibel cabal ISI mark
Amp Meter 300 AMP
Volt Meter 440 Volts
indicating lamp
320 KVA DG Set
Servicing charges
K oil per liter
L.O. Filter Cartridge
Fual Filter cartridge
Pre fuel filter with O ring
Air cleaner element primary
Air cleaner element safety
K ADD Per liter
K Cool Super per liter
180 Amp D.G. Battery
Boss pump
315 KVA Transfer servicing Include, bush, rubber packing, oilsil & gasket paper
315 KVA Transfer oil filtration per liter
315 KVA Transfer New oil per liter
125 KVA DG Set
Servicing charges
K oil per liter
L.O Fitter Cartridge
Fual Filter carriage
Pre fual filter with O ring
Air cleaner element primary
Air cleaner element safety
K ADD Per Ltr
K Cool Duper Per Ltr
Rubber mating per miter
150 A M P D G Battery
125 KVA DG AVR replacement
125 KVA DG Box pump servicing
125 KVA DG Box pump reparing
Boss pump
Providing & fixing a new cable
3.5 Core 300sq mm Aluminum cable per mtr. ISI mark
3 Core 120sq mm Aluminum cable per mtr. ISI mark
3 Core 70sq mm Copper cable per mtr. ISI mark
3 Core 35sq mm Copper Special submerecible cable per mtr. ISI mark
3 Core 25sq mm Copper Special submerecible cable per mtr. ISI mark
Wire 2.5 sqmm
3.5 core 16 sq mm copper cabal per miter ISI mark
3 core 10 sq mm copper cabal per miter ISI mark
3 core 2.5 sq mm copper cabal per miter ISI mark
Ball bearing replacement of motor and pump S.K.F. make
11) 6314 N Roller
Repairs of star/delta starter
Per star delta starter with contract
Starter relay
Novold coil
Star Delta starter contact speak kit
Repairs of DOL starter
Per DOL starter with contract
starter realy
Novold coil
DOL Starter contact speak kit
New Dol starter
New star Detta Starter
HRC Fuse
Starter Contactor
L&T make MNX 9
L&T make MNX 12
L&T make MNX 16
L&T make MNX 18
L&T make MNX 25
L&T make MNX 32
L&T make MNX 40
L&T make MNX 140
L&T make MNX 185
SIEMENS - 3TF51
SIEMENS - 3TF53
Stardelta Timer
220 volts
Time Switch Timer
Overload Relay
Relay Range 3 to 5 Amp
Relay Range 24 to 40 Amp
Providing and fixing at main switch 3 phase
25 AMP 415 Volt mark
32 AMP 415 Volt ISI mark
40 AMP 415 Volt ISI mark
63 AMP 415 Volt ISI mark
125 AMP 415 Volt ISI mark
200 AMP 415 Volt ISI mark
Changeover Switch
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .