Building Works

Item Rate

(with brief specification and reference to book of Quantity Unit Amount

No. In Figure

specifications)

[1] Excavation for foundation upto 1.50mt.Depth including 924.00 Cum. 149.67

sorting out and stacking of useful materials and

disposing of the excavated stuff as directed with in all

lead & Lift (B) Dense or Hard soil.

[2] Excavation for foundation up to 1.50M. to 3.0 mt. Depth 787.00 Cum. 285.73

including sorting out and stacking of useful materials

and disposing of the excavated stuff up to 50M. Lead (D)

soft rock not required to blasting

[3] Filling foundation and plinth with sand under floors 110.00 Cum. 460.19

including watering, ramming and consolidating dressing

etc, comp.

[4] Filling available excavated earth excluding rock in 1126.37 Cum. 130.39

trenches plinth side of foundation etc. in layer not

exceeding 20cm. In depth consolidation each deposited

layer by ramming and watering.

soil in layers of 20 cm. thickness includind watering,

ramming and consolidating etc. comp.

[6] Applying general insecticide pest control treatment to 1095.00 Sqm 89.28

floors, cupboards etc including labour materials etc.

complete. Using Imidacloprid 30.5 SCas Per IS 6313 part

- II ( (0.075% concentration by mass) is recommended

10.5ml chemical diluted with 5 liters of water

application 0.5 litre chemical /Sqm of surface is

recommended as per I.S

[7] Providing and laying controlled cement concrete M-150 70.00 Cum. 4107.67

and curing complete including the cost of form work and

reinforcement concrete work in: (a) Foundation footing

base of column and mass concrete.

[8] Providing and laying controlled cement concrete M-250 290.00 Cum. 4548.03

and curing complete including the cost of form work but

excluding the cost of reinforcement concrete work in

Foundation footing bases of column.

[9] Providing and laying controlled cement concrete M-250 43.00 Cum. 6805.38

and curing complete including the cost of form work but

excluding the cost of reinforcement concrete work in

Column upto floor two level. Upto ground level.

Description of Item

Item Rate

(with brief specification and reference to book of Quantity Unit Amount

No. In Figure

specifications)

[10] Providing & laying cement concrete 1: 3 : 6 (1 Cement : 3 298.00 Cum. 3308.00

Coarse sand : 6 graded B.T stone aggregate 20mm

nominal size) Curing comp. including cost of form work

in foundation and plinth.

[11] Providing and laying Controlled cement concrete M200 53.00 Cum. 7447.25

using B.T. stone aggregate and curing etc. complete

including the cost of form work but excluding the cost of

reinforcement. (a) Column for All floor.

[12] Providing and laying Controlled cement concrete M 250 167.00 Cum. 5800.43

using B.T. stone aggregate and curing etc. complete

including the cost of form work but excluding the cost of

reinforcement for (c) PLINTH BEAM having cross

sectional area more than 0.12 sqm

[13] Providing and laying controlled cement concrete M-150 27.00 Cum. 4323.81

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced

concrete work in Plinth PLINTH Slab .

[14] Providing and laying controlled cement concrete M-200 20.00 Cum. 6143.83

and curing complete including the costof form work but

excluding the cost of reinforcement for reinforced

concrete workn in Wall caps / Coping / Lintel bends

Ground Floor.

[15] Providing and laying controlled cement concrete M-200 36.00 Cum. 6395.69

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced

concrete work in BEAMS For All Floor.

[16] Providing and laying controlled cement concrete M-200 48.00 Cum. 6534.84

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced

concrete work in CHHAJJAS All Floor.

[17] Providing and laying trimmix vacume dewatering 219.00 Cum. 4398.55

processcement concrete work Controlled Cement

Concrete M200 (and curing complete including

compaction & Finishing of cement concrete Flooring by

trimix process providing extra labour charge for trimix

vaccum dewatering service process on cement concrete

Floor surface by using vaccum dewatering pump floater

surface vibrator including making groove 5mm width

and filling with polynile kpolynier and rough finish to

surface as per instruction including levelling etc

complete. for RCC TRIMMIX FLOOR SURFACE

[18] Provinding and Laying controlled cement concrete M- 43.00 Cum. 10768.62

250 including finising smooth with curing complete

including the cost of form work but excluding cost of

reinforcement for reinforced concrete work in

VARTICAL AND HORIZONTAL FINS/ PADADI For all

Description of Item

Item Rate

(with brief specification and reference to book of Quantity Unit Amount

No. In Figure

specifications)

[19] Providing T.M.T. bar FE500/500D reinforcement 109680.00 Kg 64.64

confirmed to for R.C.C. work including bending, binding,

and placing. In position comp. Up to floor two level. For

[20] Brick work using common burnt clay building bricks 206.00 Cum. 4317.88

having crushing strength not less than 35 Kg./ Sqm. in

cement mortar 1:6 (1 cement : 6 Fine sand) in super

structure above plinth level upto All floor level

(Conventional)

[21] Providing and fixing Glass bricks Partition using glass 40.00 Sqm 2576.51

brick of required design, type size of glass bick 19 x

cm and fixing the same with 4mm dia alluminium bar at

every 3rd layer with white cement etc.complete.

[22] Providing and fixing rolling shutters of approved make 53.00 Sqm 3503.41

made of 80 mm wide M.S. laths inter-locked together

through their entire length and jointed together at the

ends by end locks mounted on specially designed pipe

shaft with bracket plates, guide channels and

arragements for inside and outside locking with push-

pull operation including the cost of hood cover and

spring etc. complete. (B) Shutters having width below

[23] Providing & fixing M.S. Grill using 16 mm dia M.S. Bars 1080.00 Kgs 111.61

@ 15 cm C/C fixed in frame using angle 35 mm x 6 mm,

35 x 6 mm flat in center, and Galvanized wiremesh jali

20mm x 20 mm spacing, including red lead primer coat

and two coats of oil painting etc. complete

[24] Providing and laying machine polished machine cut Blue 101.00 Sqm 989.45

Kota stone slab (60 x 45cm Size) flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-

coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse

sand) laid over and jointed with grey cement slurry

mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick

[25] Providing and fixing pre-cast Rubber Dye / steel Dye 335.00 Sqm 686.90

inter locking concrete block 60mm thick with grade of

concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming to

IS 15658 : 2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and level as

per guidlines of IRC : SP 63-2018 etc. Complete

[26] Providing and fixing pre-cast concrete kerb stone of gray 240.00 Rmt. 361.64

cement based concrete block 30cm length, 30cm height

and 15cm thick of M250 grade concret as per approved

design and including excavation for fixing in proper line

and level, filling the joint with C:M 1:3 (1cement:3fine

sand) etc complete.

Description of Item

Item Rate

(with brief specification and reference to book of Quantity Unit Amount

No. In Figure

specifications)

[27] Providing and laying water proofing tretment with 120.20 Sqm 1053.43

chaina mosaic tiles flooring over avg 40 mm C.C. 1:2:4 (1

Cement, 2 sand, 1 Kapchi 20mm + 3 grit 6mm to 10mm)

bedding for maintaining slope for plain and curve

surface & 12 mm to 20 mm of broken piece of ceramic /

glazed tiles (one or more color as directed) to be laid

over cement mortar bedding of C M 1:3 (1 cement :

sand) containg one Kg. of water profing materials per

bag of O P C at plain or / and slops and to be tempered to

bring mortar ceramic up to surface with using white

cement and colour pigment including rounding of

junctions and extending them up to 15 cm along the wall

and curing with bends any pattens or design as per

drawing and cleaning by using oxalic acid etc complete.

[28] Providing 20 mm thick double coat mala cement plaster 780.00 Sqm 230.43

on interior brick / concrete work for plastering

comprising of base coat of 12 mm thick cement plaster

in cement mortar (1 Cement : 4 coarse sand) in rough

finishing and 8 mm thick top coat of cement mortar 1:2

(1 Cement : 2 Coarse sand) finished with trovel

including scaffolding curing etc. complete. For Ground

[29] Wall painting with Applying two coats of putty & two 1560.00 Sqm 160.01

coats of primer of approved brand (three coats) plastic

emulsion paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and sand

papered smooth.

[30] 20mm thick sand faced cement plaster on walls upto 1093.00 Sqm 335.65

height 10 metres above ground level consisting of 12mm

thick backing coat of C.M. 1:3 (1-cement : 3-sand) and

8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand)

with 1cm x 1cm groovs as per pattern sample approved

by the engineer incharge etc. complete.

[31] Finishing wall with 100% ACRYLIC weather proof 2186.00 Sqm 114.53

exterior emulsion paint on wall surface (two coats) OF

STANDERD COMPNY LIKE ASIAN, NEROLAC, ICI OR

EQUIVELANT to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

[32] Providing thoruting or plaster drip and moulding to 255.00 Rmt. 41.00

R.C.C. chhajja.

[33] Providing 12mm wide groove throating / notch in 289.00 Rmt. 20.20

plaster including finishing the same etc. complete for all

Description of Item

Item Rate

(with brief specification and reference to book of Quantity Unit Amount

No. In Figure

specifications)

[34] Providing and Fixing PROFLEX type self supported Roof 1387.00 Sqm 3701.65

(Arch Type) using Cold rolled, Galvalume steel colour

coated sheet 1.5mm thick conforming to ASTMA

A792 DIN, ALU Zinc Coating : AZ150 and Regular

Modified Polyster painting with epoxy primer service

coat at bottom, including necessary fixtures & Fastening

for Lighting arrangement and turbo ventilator with sky

[35] Providing and fixing Turbo Ventilator made from 9.00 No 12746.20

Alluminium and stainless steel with ploy Carbonate Sky

Light of size 2 x 7 feet including fixing in roof as and

where directed by Engineer in charge etc.complete.

[36] Box cutting the road surface to proper slope and 1507.00 Cum. 104.20

chamber for making a base for road work including

removing the excavated stuff and depositing on the road

side slope as directed up to 50 mts. Lead.

[37] Construction of granular Sub base by providing coarse 232.00 Cum. 1124.09

graded material BTMC using metal 53mm to 26.5 mm@

35%, aggregate 26.5 mm to 4.75 mm @ 45% and stone

dusts 2.36 mm 7 below @ 20% incl. spreading in

uniform layers with motor grader on prepared surface

mixing by mix in place method with rotavator at OMC

and compacting with vibratory roller to achieve the

desired density complete as per Clause 401.2 Table

400.1 grade-I

[38] Supplying and laying, spreading and compacting coarse 232.00 Cum. 338.35

clean sharp specified sand (C.B.R. not less than 10%)

below sub base course including carraige of material

spreading in uniform layers manually on prepared base

and compacted with power roller to achieve desired

density including all materials, labours etc. complete.

and spreading coarse clean sand as directed.

[39] Providing and laying 300mm thick W.B.M. with B.T.M.C. 348.00 Cum. 941.32

metal 40mm to 63mm size two layer of 150mm thick

including using 25% stone dust as filler including

spreading watering consolidation and rolling etc.

complete at site of work including loading unloading

and filling the boxes etc. complete.

[40] Providing and laying controlled cement concrete M.200 464.00 Cum. 4242.00

and curing complete including the cost of formwork and

reinforcement for reinforced concrete work in (A)

Foundations, footings, Base of columns and Mass

Description of Item

Item Rate

(with brief specification and reference to book of Quantity Unit Amount

No. In Figure

specifications)

[41] Compaction and finishing of cement concrete road by 1905.00 Sqm 85.85

tremix process, providing extra labour charge for tremix

(Vaccum dewatering service) process on cement

concrete road surface by using vaccum dewatering

pump floater surface vibrator including making groove

5mm width and filling with polyvynile polymer and

rough finish to surface as per instruction including

leveling etc. complete.

[42] Providing T.M.T. bar FE500/500D reinforcement 9943.00 Kgs 76.21

confirmed to for R.C.C. work including bending, binding,

and placing. In position comp. Up to floor two level

[43] Providing and fixing junction board of M.S.plates and 4.00 No 5236.70

angles as per standered IRC design including fixing in

C.C. 1:4:8 with necessary excavation, painting, figuring

and lettering on board etc. comp.

[44] Providing & laying cement concrete 1:4:8 (1 Cement : 4 7.00 Cum. 2680.21

Coarse sand : 8 B.T.aggregates 20mm nominal size) and

Curing complete excluding cost of form work in

foundation and plinth

[45] Providing and Casting in situ controlled Cement 21.00 Cum. 4443.28

Concrete M-200 for R.C.C. Raft and cutt-off walls

including necessary shuttering laying, vibrating,

ramming and curing complete.

[46] Supplying and laying reinforced and concrete heavy 8.00 Rmt. 3446.50

duty non pressure pipes with collars for culverts

including setting and joining the pipes in C.M. 1:2

watering and laying (to level or slope) of I.S. class NP3

900mm internal diameters

[47] Constructing providing and fabricating cattle guard 23.00 Sqm 5089.39

using channel section frame of size ISMC series 100 mm

x 50 mm (Weight 9.20 kg/Rmt) and ISMC section

mm x 75mm (weight 11.50 kg/Rmt) intermediate

support for welding G.I.pipe at 12 Cm C/C of size 50 mm

in a frame made of Channel section size 100 mm x

mm all round including fixing the unit on prepared

chamber of masonary wall using MS hold fast embeded

in masonary wall top as directed by Engineer in charge

and as per drawing and necessary required arrangement

etc complete.

[48] Supplying & installing of Dry Chemical Powder type 6 9.00 No 2626.00

Kg. Capacity fire extinguisher as per I.S. 2171 ISI. Mark

with necessary fittings etc. complete.

[49] Providing Carben doxide type fire extinguisher 4.5Kg. 9.00 No 5706.50

Capacity with I.S.I. Mark and test certificate of explosive

deprtment of Nagpur

[50] Providing and laying controlled cement concrete M-250 13.00 Cum. 4548.03

and curing complete including the cost of form work but

excluding the cost of reinforcement concrete work in

Foundation footing bases of column.

Description of Item

Item Rate

(with brief specification and reference to book of Quantity Unit Amount

No. In Figure

specifications)

[51] Providing and laying controlled cement concrete M-250 5.00 Cum. 6805.38

and curing complete including the cost of form work but

excluding the cost of reinforcement concrete work in

Column upto floor two level. Upto ground level.

[52] Providing and fixing thick M.S. pipe parking shed post & 50.45 Qtls 9047.86

Rafter & Cross , MS pipe purlines with necessary M.S.

plate including cutting, bending, grinding, welding,

drilling for nut bolts including painting two coats of oil

painting over primer coat etc. complete.as per directed

by engineer incharge.

[53] Providing PPG sheet (Red / Teracota /White / Green / 468.00 Sqm 1098.88

Gray Shade in Color) of roofing fixed with glavanished

iron J or L Hooks, Bolts and nuts 8mm diameter with

bitumen and G.I. limpet washer or G.I. limpet washer.

filled with white lead complete excluding the cost of

purlins, Rafters and Trusses. (1) 0.50 mm thick sheet.

[54] Point wiring for Light / Bell with 2-1.5 sq.mm & earth 8.00 Pts. 485.81

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up

to 10 mtr length, in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder with

adaptor/ceiling rose / H.D.Connector as directed. (f)

with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete.Cat.III

[55] Point wiring for Individual Plug with & earth wire of 1.5 8.00 Pts. 745.38

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front

plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories.[II] For 16A

Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from

mcb db board. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete.Cat. III

[56] Point wiring for on board Looped Plug with 6A Modular 8.00 Pts. 257.55

type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following

type accessories.Cat.III

Description of Item

Item Rate

(with brief specification and reference to book of Quantity Unit Amount

No. In Figure

specifications)

[57] Providing following type of Modular Type Accessories 8.00 Nos. 25.25

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate, modules erected with

necessary connections as per site situation directed by

Engineer In charge. (7) Blank Plate Single.Cat.III

[58] Providing & erecting PVC Corrugated Flexible Conduit 20.00 Mtrs. 21.21

with required nos. of coupling, PVC bushes, Check-nuts

etc. complete of following sizes. (2) 25 mm.

[59] Providing and erecting Mains with 1.1 KV grade FRLS 600.00 Mtrs. 82.82

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size. (A) With

medium class Rigid PVC pipe and accessories. (b) 2 wire

[60] providing and erecting Mains with ISI marked, 1.5KV 10.00 Mtrs. 91.91

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated conforms to

IS 694, IEC - 227 erected in existing pipe of following

size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if required.

(f) One wire 10.00 sq. mm

[61] (g) One wire 16.00 sq. mm 10.00 Mtrs. 142.41

[62] Supplying and erecting Flexible PVC insulated 84.00 Mtrs. 46.46

multistrand multicore 1.1 kv grade ISI marked copper

wires of following size to be erected as directed. e)

Sq.mm 3 core round PVC sheathed

[63] Providing & Erecting 3mm thick acrylic Sheet with 1000.00 Sq.Inche 3.03

grooving as directed s.

[64] Providing & erecting Switch board for Computer or 8.00 Nos 1133.22

electric apparatus consisting of following modular type

accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame

covered with textured/metallic /white front plate,

modules erected with necessary connections as

directed.1 no. 6A/16A universal plug-switch combined.3

nos. 6A Switch.3 nos. 6A 5 pin Plug.For Modular Type

Accessories.Cat.III

Description of Item

Item Rate

(with brief specification and reference to book of Quantity Unit Amount

No. In Figure

specifications)

[65] Supplying and erecting LED indoor fittings with LEDs of 8.00 Nos 373.70

wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than

0.95, THD < 15%, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt, LED driver efficiency > 85 %,

(fitting required LM-79 & LM-80 Certificates) (NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

(A) Tube Light with integral driver. (iv) 22-24 Watts,

Surge - 2KV, IP-20, conventional 4 feet.Cat.III

[66] Supplying and erecting LED street light / Flood light 56.00 Nos 7266.95

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V, Power Factor more than 0.95, THD < 10 %, CCT

K to 5700K, Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %. (

fittings required LM-79 & LM-80 certificates) (NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

(B) Flood Light (IP-65) , Surge protection -4KV integral

and, Light must have 440VAC line supply with over-

voltage protection. (iv) 120 watts.Cat.III

[67] Providing and erecting Approved make Four pole 1.00 Nos 6173.12

moulded case circuit breaker having breaking capacity

ICU of 25 KA. at 415 V, having normal current rating up

to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected

in existing 16 G.M.S. housing.ICS=100% of ICU only.Cat

[68] Providing and erecting Approved make Four pole 1.00 Nos 6790.43

moulded case circuit breaker having breaking capacity

ICU of 25 KA. at 415 V, having normal current rating up

to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected

with Enclouser 16 G.M.S. housing.ICS=100% of ICU

only.Cat III

Description of Item

Item Rate

(with brief specification and reference to book of Quantity Unit Amount

No. In Figure

specifications)

[69] providing and erecting Approved make Earth fault Relay 1.00 Nos 4687.41

suitable to mount with inter connection suitable to

following size of moulded case circuit breaker having CT

ratio & MCCB rating as following along with shunt trip

220V AC. with all internal connections & complete

erected in existing M.S.housing. (1) 15 A -100 A, CT

Ratio 1/100

[70] Supplying and erecting triple pole & neutral 440V / 0.50 Mtrs. 1961.42

500V panel mounting Copper Busbars with four equal

Nos. of electrolyte bus having current density not more

than 1.6 Amp. / sq.mm (Rated current / cross section

area) duly wrapped with colour insulating tape for

phase sequence of following current carrying capacity,

erected with necessary bus bar supports /insulators,

main cable socket to each bar, erected in existing cubical

panel with necessary connections. (A) Suitable for

Amp. Capacity

[71] providing and erecting Miniature circuit breaker single 56.00 Nos. 270.68

pole 0.5A to 2A system and having breaking capacity

KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark.Cat.III

[72] Providing and Erecting Miniature circuit breaker single 8.00 Nos. 112.11

pole 6A to 25A suitable to operate on 240 V A.C. system

and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark

[73] Providing & erecting 240 V MCB double pole switch for 8.00 Nos. 299.97

motor & inductive load (C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having

following capacity. (A) 6 to 32 Amp.Cat.III

[74] Providing & erecting 415 V MCB Four Pole for Motor & 4.00 Nos 737.30

Inductive Load (C Curve) having 10KA breaking capacity

& confirms to IS :8828 in existing box having following

capacity. (C) 63 Amp.Cat.III

[75] (B) 40 Amp.Cat.III 5.00 Nos 668.62

[76] Providing and erecting Sheet Steel powder coated MCB 2.00 Nos 2339.16

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs. (The DBs should be used of

same company of MCB to be used) suitable for. (B) three

phase incoming and single phase horizontal type

outgoing Per phase isolation type (PPI) . (b) sheet steel

double door (IP-43) . (I) 4 way (Open)

Description of Item

Item Rate

(with brief specification and reference to book of Quantity Unit Amount

No. In Figure

specifications)

[77] providing and erecting Approved make RCCBs 6.00 Nos 1969.50

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V, 50Hz.

having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic

component. for following Max. rating erected as

directed. (i) 25 Amps. DP.Cat.III.

[78] Providing and erecting Approved make RCCBs 2.00 Nos 2637.11

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and

suitable for operation on 3 phase and neutral 415V,

50Hz. having characteristic of quick action & tripping

with all advance feature & do not incorporate any

electronic component for following Max. rating erected

as directed. (ii) 40Amps. FP.Cat.III

[79] Providing and erecting Annealed bare Copper wire 8 6.00 Kgs 794.87

[80] Supplying & erecting earth pit of minimum bore 3.00 Nos 4591.46

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for

following type of applications with chamber and heavy

duty cover. (A) (approved make OEM has to submit test

certificate including value of earth resistance of

installation duly stamped and signed by agency and

officer Incharge has to ensure the value of earthing

resistane mentioned in test Certificate) & having back

filling compound of (B) Inner chemical (CCM

Compound) - Resistivity:- 0.2 ohm / meter testing as per

IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry

form, Sulphar content:- <2% (C) Back fill Compound :-

Earthing compound should be capable to retain

moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation up to

440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

[81] Providing and erecting XLPE (IS:7098) (I) -88 ISI 1340.00 Mtrs 140.39

armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of following size of

cables. (c) 4 core 10 Sq. mm

Description of Item

Item Rate

(with brief specification and reference to book of Quantity Unit Amount

No. In Figure

specifications)

[82] Providing and erecting XLPE (IS:7098) (I) -88 ISI 300.00 Mtrs 153.52

armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables. (A)

core 16 Sq. mm.

[83] Providing and erecting XLPE (IS:7098) (I) -88 ISI 80.00 Mtrs 183.82

armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (A)

1/2 core 25 Sq. mm (16 Sq. mm 1/2 core)

[84] Making trench in soft soil of suitable width of 90 cm 210.00 Mtrs 55.55

deep for laying cable or locating the fault all over the run

and back filling the same and making the surface as

normal ground.

[85] Supplying following size of Light duty “A” Class G.I . Pipe 20.00 Mtrs 300.98

& erecting as directed by Engineer-in-charge. (B) 50 mm

[86] Providing & laying approved make Double walled 720.00 Mtrs 62.62

corrugated pipes (DWC) of polyethylene (conforming to

IS 14930 II) with necessary connecting accessories of

same material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable. (A) 50 mm outer dia.

[87] Providing and, fixing heavy duty flange type brass cable 115.00 Nos 38.38

gland with rubber ring for PVC insulated armoured

cable complete with out going tails, insulating tape etc

for following size of cables. (c) 2 to 4 core 10 Sq. mm

[88] (D) 2 to 4 core 16 Sq. mm 4.00 Nos 47.47

[89] (E) 2 to 4 core 25 Sq. mm 2.00 Nos 51.51

[90] Solderless crimping type Aluminium lugs conforming to 234.00 Nos 13.13

IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an

approved manner. (B) 10 Sq.mm.

[91] (C) 16/25 Sq.mm. 23.00 Nos 15.15

[92] Supplying and erecting approved make double ball 8.00 Nos 4950.01

bearing oscillating type Heavy duty bracket fan with

Aluminium Blades A.C. 23OV. 50cy/s wall mounted with

height adjustment and rotary tilting device complete

with guard, wall bracket, mounting accessories as

directed. (A) 450mm .

Description of Item

Item Rate

(with brief specification and reference to book of Quantity Unit Amount

No. In Figure

specifications)

[93] Supplying & erecting approved make SMC press 56.00 Nos 898.90

moulded composite FRP. loop-in, loop-out approx. 2mm

thick box complete with Bakelite connector strip 5way

(3P+N+E) , DIN rail for mounting mob & hinged doors as

per requirement having locking arrangements with

mounting clamp with nuts, bolts & washers suitable for

erection on pole with cable clamps& earth bolt of

following size of box. (A) 300mm x 200mm x 100mm

[94] Supplying & erecting IP 55 grade following size section 1.00 Nos 3595.60

pillar fabricated from joint less M.S. Sheet with angle

iron legs made from jointless M.S. Angle with cable

clamps to be buried in ground to have appropriate

erection to work uniform until erected with cement

concrete foundation and 45 cm high bricks work

finishing with plaster etc. hinged double door internally

supported on both side, with internal and outside

looking arrangement with look and keys in duplicate

x 35 x 5 mm M.S. Angle of Two Nos. one is welded and

other with nut and bolt for erecting Bakelite sheet.

Painting the Section Pillar inside and out side with three

tank powder coated paint. section pillar roof should be

without joint with water leakage proof & tested as per IP

55 test & followed by IS 2147 of 1962. (B) 75 X 60 X

cm section pillar fabricated from 16 Gauge MS Sheet

with angle iron legs 45 cm long made from 35 X 35 X

mm thick MS angle.

[95] Supplying & erecting approved make Digital time switch 2.00 Nos 3168.37

having lithium cell 6 years operative and operate

battery backup 1 channel day clock with 14 memory

programme, suitable to operate on 240V + 5%, 16A

with, floating contacts Minimum switching setup time

minimum & LCD display. Also comprised permanent

ON/OFF switching. Programming switches & housed in

fire proof thermoplastic enclosure & transparent cover

erected as required with necessary connection erected

as directed.

[96] Supplying & erecting power contactor, AC3 duty for time 2.00 Nos 2782.55

switch complete erected as per direction. [D] 4 pole

440V 40 Amp. Cat III

[97] Providing & erecting water cooler having storage 1.00 Nos 55893.40

capacity 150 Ltr. & cooling capacity 150 Ltr.per hour @

an ambient temp of 45˚ C. The outlet temp. of the water

should drop by 15˚C within a hour, The water cooler

should be comprising of hermetically sealed

compressor, fan motor, condensing unit, water tank

surrounded by evaporating, coil, thermostats, relay

etc.complete with necessary inlet & outlet connection.

The body of water cooler will be made from Stainless

Description of Item

Item Rate

(with brief specification and reference to book of Quantity Unit Amount

No. In Figure

specifications)

[98] Supplying & erecting 5 stage single reverse osmosis 1.00 Nos 29187.99

water purification system with M.S. powder coated

frame, prefilter housing with 'O' ring presediment filter

GAC filter, carbon filter suitable buster DC pump

capacity 80 psi, mention with 40 psi inline type post

carbon filter auto low & high pressure switches with

following size of storage tank & LPH capacity & erected

as directed.[C] 50 Ltr / Hr with 150 psi 2 nos booster

[99] Supplying and erecting approved make Single phase 2.00 Nos 3076.46

power conditioners suitable for input voltage 180V /

280V, output voltage 220V (+ / - 10%) AC 50 ‘Hz with

electronic relays & component of housed in sheet metal

cabinet ‘with epoxy powder coated, with high - low cut-

universal socket with range off. (C) 3 KVA.

Total Rs.

I/We am/are willing to carry out the work at…...................... % above/below percent (Should be written in

figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to

Deduct………% below Add………% Above

In words In words

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the

5. Credit of Dismantal Material amount of Rs……NA…. must be recovered from Contractor's R.A Bill.

6. Payment will be given only if the material testing result is satisfactory.Testing of material shall be

done as per statement attached with specification

Signature of Contractor Deputy Executive Engineer Executive Engineer

R & B Sub Division Kheda R & B Division

Kheda Nadiad