Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.5 LAccepted-AOC | L1 | Accepted-AOC The Lowest Bidder | |
| 2 | L2₹19.5 L+₹1.0 L (5.45%)Rejected-AOC | L2 | Rejected-AOC Other than lowest bidder | |
| 3 | L3₹19.6 L+₹1.1 L (6.01%)Rejected-AOC | L3 | Rejected-AOC Other than lowest bidder | |
| 4 | L4₹20.3 L+₹1.8 L (9.77%)Rejected-AOC 33 D BHATTACHARJEE PARA AAM BAGAN OPP ARMY SUPPLY DEPO GATE PO BARRACKPORE DIST 24 PARGANAS NORTH KOLKATA 700120 | 24 PARAGANAS NORTH | WEST BENGAL | 700120 | L4 | Rejected-AOC Other than lowest bidder |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
14 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (S) BARRACKPORE
COMMANDER WORKS ENGINEER (SUB) MILITARY ENGINEER SERVICES PO BARRACKPORE DIST 24 PGNS (N) KOLKATA 700120 (WB)
AUGMENTATION OF ELECTRIC SUPPLY AT BARRACKPORE MIL STN AND AUGMENTATION AND UPGRADATION OF EXISTING E/M SERVICE SUPPLY AT KANCHRAPARA UNDER GE BARRACKPORE
2023_MES_597225_3
CWE/BKP/05 OF 2023-2024
Open Tender
Civil Works
Item Rate
180 days
GE BARRACKPORE
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE BARRACKPORE
₹40,000
Yes
1 Aug 2023
1 Jul 2023
17 Jul 2023
1 Jul 2023
14 Jul 2023
1 Jul 2023
Amount
Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft /loose soil complete all as specified and as directed.
Excavating in trenches n exc 1.5 m wide and n exc 1.5 m depth for foundation n exc 10 sqm on plan and getting out in soft/ loose soil complete all as specified and as directed.
Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed.
Returning filling in trenches including spreading, levelling, watering and well ramming in layers n exc 25 cm, in soft/ loose soil complete all as specified and as directed.
M&L for Moorum/Red Bajri filling in floors or pavings, laid in layers n exc 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed.
M&L for PCC (1:4:8), type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete including necessary form work complete all as specified and as directed.
M&L for Damp proof course to horizontal surface including necessary form work in cement concrete (1:2:4), type B-0, 25mm thick all as specified and directed.
M&L for Reinforced cement concrete Design Mix (M-25) using (20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc basement slabs, under-reamed piles, complete all as specified and directed.
M&L for Reinforced cement concrete Design Mix (M-25) using (20mm graded stone aggregate) in columns, pillars, piers, posts and struts etc, complete all as specified and directed.
M&L for Reinforced cement concrete Design Mix (M-25) using (20mm graded stone aggregate) as in lintel/band beams, cantilevers, bressummers over 1.5m span all as specified and directed.
S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat section or tubular sections) including distance pieces, cleats etc etc including necessary cutting, welding etc complete Fe-410 w gde E-250 quallity A, complete all as specified and directed.
M&L for form work to sides of concerte, foundation, footings base of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to butter, flat rough finished, complete all as specified and directed.
M&L for form work to sides of pillars, Posts, struts, piers, and columns rough finished surfaces of square, rectangular or polygonal size flat rough finished, complete all as specified and directed.
M&L for Form work to sides and soffits of floor or roof beam, beam hings, girders bressume, lintles, contilevers, shelves including support over lungs etc also splays between floor and beams etc. flat rough finished, complete all as specified and directed
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L for preparation of new steel surface over 10cm girth or width and apply two coat synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for colums,hooking ends, and including mild steel wire not less than 0.9mm dia or securing with clips quality conforming to, TMT bars all as specified and directed
M&L for reinforcement TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, bent to shape required including cranking required and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410 Gde E-250 complete all as specified and directed.
M&L for Brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 Mtr mean radius built in cement mortar (1:6) all as specified and directed.
M&L for Hard core of guage n.exe 63 mm, using broken stone or boulders deposited spread and levelled in layers n.exe 15 cm thick, watered and rammed to a true surface.
M&L for PCC(1:4:8), type D-2, (using 40 mm graded stone aggregate) as in sub base, 100 mm thick, complete all as specified and directed.
M&L for cement concrete (1:2:4), type B1 (using 20 mm graded stone aggregate) 40 mm thick, finishing cement concrete surfaces even and smooth with using extra cement complete all as specified and directed.
M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of concrete/wall surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for 20mm thick rendering in cement mortar (1:4) on fair face of brick work mixed with liquid water profing compound on walls and roof surfaces finished even and smooth without using extra cement all as specified and directed ( Note : WPC measured and paid separately)
Supply only Liquid water proofing compound.
S&F Steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars dove tailed or welded, complete all as specified.
S&F 3mm thick sheet glass , ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane in new windows complete all as specified and directed.
S&F 2nd class hard wood plain solid, straight chowkats and frames wrought,frame rebated on the solid,rounded or chamfered,put together with glue pinned at joints, complete all as specified and directed.
M&L PCC(1:2:4 ), type B1( using 20 mm graded stone aggregate ) as in cills, seisonic and other similar bands, plinth courses, string courses etc complete all as specified and directed.
M&L for flush shutters 40mm solid core constuction with block board core and plywood face panels, both faces covered with decorative veneer with lipping/frame to match complete all as specified and directed.
S&F 35mm thick factory made skeliton/gauzed shutter open rebated and prepared to receive glass gauged etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a) complete all as specified and directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in window and door complete all as specified and directed.
S&F flat iron as in hold fast including tarring or coal tar black paint conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.
S&F curtain rod of aluminium alloy 25 mm dia all as specified and as specified.
S&F MS bracket powder coated of best approved quality suitable for fixing 25 mm bore cromium plated (heavy) rod, fixed on wall as directed.
S&F 200 mm long, aluminum anodised barrel tower bolts of extruded section and fixed, complete all as specified and directed.
S&F 100 mm butt hinges medium weight cold rolled mild steel, and fixed complete all as specified and directed.
S&F 150 mm long aluminum handles, fabricated type, anodised complete all as specified and directed.
S&F aluminium alloy anodised ,sliding door bolt 250 mm long with hasp staples (bolt type) and fixing clip of sheet , cast or extruded section and fixing bolt and sliding bolt of extruded sections or cast alluminium alloy and fixed, complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and filling with 3 mm thick wall putty and applying two coats of oil bound distemper including one coat of primer on plastered surfaces complete all as specified and directed.
M&L for applying two coat of acrylic, antifugal emusion exterior weather proof paint complete all as specified and directed.
S&F mild steel framed work such as grills, gratings etc with ends bars shouldered and riveted or forged into spikes: framed guard bars and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L for preparation of new wooden surface over 10 cm girth or width and apply two coat synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for 75mm thick cement concrete(1:4:8), type D-2, ( using 40mm graded stone aggregate) as in sub base of footpath complete all as specified and directed.
M&L for chequered cement concrete tiles (30cm x 30cm x 25mm thick) glossy finished with grey cement and pigment set, jointed & pointed in neat cement slurry in floors with glossy finish over 15 mm thick screed bed in CM(1:6) complete all as specified and directed.
S&F 4mm thick Fibre Cement Standard Ceiling Board of Everest (Model - Oceanic) or equivalent make with false ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200 mm c/c) consisting of Main Runner 3600mm long, Cross Tee 1200mm/600mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300 mm c/c. The Main Runners to be placed @ 1200mm, The Cross Tee 1200mm will be inserted in the precut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm. Additional Cross Tees of 600mm shall be placed perpendicular to the Cross Tee 1200mm long to finally form a grid of 600mm x 600mm. Grid of module size 600mm x 600mm shall be supported by 1.5 mm dia GI wire from purlins/soffit. 4mm thick High Pressure Steam Cured Non Asbestos Fibre Cement Standard Ceiling Board (Density > 1200 Kg/m3) of size 595mm x 595mm, conforming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part 4, 5, 6, 7 & 8 should be placed in the Grid module to form all as specified and directed.
M&L for Three coats of white wash after preparation of new plastered surfaces of wall complete all as specified and directed.
M&L for reinforced cement concrete(1:2:4),type B1, (using 20 mm graded stone aggregate) in chajja complete all as specified and directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat rough finished, complete all as specified and directed.
M&L for RCC (1:2:4), type B-1 (using 20 mm graded stone aggregate) as in slab supported on walls, beams and column in floors, roof landings, balconies, canopies, deck slabs and in shelves complete all as specified and as directed.
M&L for RCC (1:2:4), type B-1 (using 20 mm graded stone aggregate) as in columns,pillars,piers, posts and struts complete all as specified and as directed.
M&L for RCC (1:2:4), type B-1(using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc basement slabs, under-reamed piles, complete all as specified and directed.
M&L for rendering 5mm thick in cement mortar (1:3) on concrete surfaces in ceiling including finishing even and smooth without using extra cement complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.
M&L for Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick or concrete surfaces in cement mortar (1:4) finished even & smooth without using extra cement as on walls
S&F powder coated anodised aluminium alloy sections 3 tier track sliding windows series B, weight of section frame 1.248 kg/m and shutter section weight 0.547 kg/m, Jindal or equivalent make, duly fitted with neoprene beading, glazing clips, tinted glass panes 4.80/5.0 mm nominal thickness, aluminium expanded mosquito proof wire cloth 0.45 mm dia and average width of aperture 1.4 mm, aluminium alloy handles etc complete all as specified and directed. Note : Rate shall include all glazing/aluminium expanded wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc
S&F powder coated anodised aluminium ventilator with fixed aluminium frame of size 65 x 40 x 1.98 mm thick or equivalent section fixed in vertical position with aluminium vertical members and half portion to be provided with 4 mm thick pinhead glass and remaining portion to be louvered using 4 mm thick pinhead glass and louvered portion covered with aluminium expanded mosquito proof wire cloth 0.45 mm dia and average width of aperture 1.4 mm incl necessary frame work, including rubber gasket and aluminium beading complete all as specified Note : Rates shall include all glazing/aluminium expanded wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading etc
Preparation of new plastered surfaces and applying two coats of OBD over a coat of primer applied over 3mm thick super fine Birla or altek wall care putty finish including preparing the surfaces even and smooth complete all as specified and directed.
S&F vitreous china squatting pan, ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, including CI 'P' or 'S' trap, embedded and set in PCC (1:5:10), type E-2 incl including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete and making good to floor including removing rubbish complete all as specified and directed.
S&F PVC valveless syphonic action type ,flushing cistern, Low level white, with inlet ball valve, float and handle, 10 Ltr capacity including brackets complete all as specified and directed.
S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick, over 15mm thick cement mortar(1:6) screed bed, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
All as per item No. 64 above but as in skirting.
S&F Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick cement mortar backing plaster in CM (1:4) complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, 500 ltr capacity complete all as specified and directed.
S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in floor complete all as specified and directed.
S&F 110 mm dia PVC (SWR) bends complete all as specified and directed.
S&F 20 mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, concealed joint with CPVC adhesive taflon tape complete to walls and ceilings or laid in floors including all connected brass CPVC fittings and cutting grooves, filled with CM (1:6) complete all as specified.
S&F 25 mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, concealed joint with CPVC adhesive taflon tape in any requirement complete to walls and ceilings or laid in floors iincluding all connected brass CPVC fittings and cutting grooves, filled with CM (1:6) complete all as specified.
S&F chromium plated Bib taps (suitable size for 20 mm outer dia CPVC pipe), cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.
S&F stop valve fancy type, chromium plated with long shank and cup (concealed type), screwed alloy, screed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed 15mm bore pipe complete all as specified.
M&L for applying evenly a coat of oil based bitumen primer confirming to IS-3384 on roof, canopy, chajja, parapet (vertical surface etc) @ 0.40 Litre / Per Sqm by the same membrane manufacturer of density 250C, 0.87 to 0.89 litre and viscosity 70-160 cps after proper cleaning the roof surfaces (horizontal/vertical) and providing APP based polymeric membrane minimum weighing 3.6 Kg/Sqm and minimum 3mm thick reinforced with polyester non wove fabric (weight not less than 150 gms / sqm) laid on primed surface with side over lap of 100 mm and end overlap of 150 mm, using butane torch or by LP gas torching and sealing all joints etc and ensuring complete thermo fusing and applying one coat of aluminum paint @100ml/Sqm over it all as per manufacturer's instructions complete all as specified and directed.
M&L for point wiring complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade(MMS) and including cutting, chasing work at any height and all accessories concealed in walls / roofs / floors / ceiling etc. flush mounting MS box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of and including white/Silver/Dark bronze colour modular blanking plate as per number of switch modules flush mounted for fixing of modular switches,sockets,fan regulators, blank plate etc and including above mentioned colour modular plate cover of required modules and including 1.5 Sqmm PVC insulated multistranded FRLS type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with putty for smooth finishing complete all as specified and directed for the following:- (Note:- All necessary accessories such as modular box,top cover plate, blank plate,MS box,screws,washers and all modular electrical fixtures are used same make/brand only and including cutting & chasing work at any height and shall be deemed in to included in quoted rate only.)
(a) One light point controlled by one switch.
(b) One fan point controlled by one switch and one regulator.
(c) One exhaust fan point controlled by one switch .
(d) One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .
(e) One 5 pin 6 amps socket point controlled by one 6 amps switch on same board .
All as per item No.76 above,but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed for the following:- (a) One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board.
S&F modular type switch socket 6 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed.
S&F modular type switch 6 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed.
S&F modular type switch 16 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed.
S&F modular type socket shuttered type 6 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed.
S&F modular type socket 6 A/16 Amps, 6 Pin combined shuttered socket 2 module,240V,AC ISI Marked complete all as specified and directed
S&F angle lamp holder, insulated body with back plate for batten fittings including LED lamp 10 watts complete all as specified and directed.
S&F ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed
S&F decorative box type 20 watt light fitting, blue coloured end caps, pre-wired, and including providing PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose and including LED T-8 tubular lamp of 20 Watt extruded aluminium/PC body and PC diffuser complete with inbuilt LED driver complete all as specified and directed.
S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 Watt 220V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as speicifed and directed.
S&F integrated LED Bulk head light fittings of 10 watts pressure die cast housing acrylic diffuser and frame with IP 65 protection complete as specified and as directed. (Make :- Crompton Cat No:- LBHP-10-CDL or equivalent of Wipro/Havels.)
S&F SPN double door distribution board 8 way acrylic door 240 volts AC,SPN for flush mounting with 200 amps copper busbar,neutral bar,earth bar and MCB incomer of rating upto 200Amps ,MCB SPN/DP, and MCB SP as outgoing and complete connecting cable links with top and bottom removable gland plate with IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface.
S&F MCB SP 6 to 32 Amps 10 KA,"B" series, AC, 240Volts, 50Hz , ISI marked complete all as specified and directed.
S&F MCB SPN 40 to 63 Amps 10 KA,"B" series, AC, 240Volts, 50Hz, ISI marked complete all as specified and directed.
S&F ceiling fan complete with blades,down rod,electronic type regulator(if required) and accessories 230 V,1200 mm sweep.min air delivery 210CFM. BEE 5 star rated complete all as specified and directed.
S&F exhaust fans PVC Body AC ,single phase, 230/ 240 V, of size 250 mm sweep with louver complete all as specified and directed.
Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC(1:3:6) earth pit chamber, type C1, of size 45X 45X 45 CM, RCC (1:2:4) cover, type B1, of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value complete all as specified and directed.
Supply and fix modular metal flush box and modular cover plate with frame of 8 module,complete all as specified and directed.
Supply and fix modular metal flush box and modular cover plate with frame of 1/2 module,complete all as specified and directed.
Supply and fix modular metal flush box and modular cover plate with frame of 3 module;complete all as specified and directed.
Supply, laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sq mm 4 core, complete all as specified and directed.
S&F stepped type (0-4 step) electronic regulator for ceiling fan 1200 mm, 240, 100 watts, single pole, including connecting, testing complete all as specified and as directed by EIC.
S&F Socket outlet, flush type 2 in 1, 5 pin, 5amps, 240 volts, complete all as specified and as directed by EIC.
S&F switch piano flush button single pole one way 5 amp 240 volts, complete all as specified and as directed.
S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amps, flush type, 240 volts complete all as specified and as directed.
S&F switch piano flush button single pole one way 15 amp 240 volts, complete all as specified and as directed.
S&F sheet metal enclosures for SPN DB's with double glazed door for incorporating MCBs, IP-43, 8 way with 200 amps rated busbar, 240 volts, as per IS-8623 complete all as specified and as directed. (Make : HPL, Legrand, Hager, Anchor).
S&F MCBs SPN 32 Amps, 240 volts, 50Hz, 'C' curve including necessary incoming and out going electric connection with suitable size of copper lugs complete all as specified and as directed by Engr-in-Charge, (Make : Legrand/Havells/L&T).
M&L for LED Bldg Security light Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.
Supply, fixing and testing Ceiling fan complete with all accessories, 230 V, 1200 mm sweep, BEE 5 Star rated, 03 blade type, double ball bearing Copper wound, 50 HZ, AC supply, all as specified and directed by Engr-in-charge.. (Make: Crompton Greaves Aura 3 blade/ Havells Cat No. ES-50 HS/ Bajaj Excel 3 blade.) (Note- Rate quoted includes Fan clamp suitable for 1200 mm ceiling fan).
S&F exhaust of 300 mm sweep four blade copper winding type heavy duty with louver and connecting up including provision of cables from ceiling rose or connector to fan complete making holes for exhaust fan and making good the disturbed surfaces of wall and matching with the existing surface all as specified and as directed by EIC. (Make-Havells/USHA/Crompton) (Note- Rate quoted includes necessary cutting chasing in brick/stone wall of 300 mi dia suitable for fixing of exhaust fan and provision of heavy duty lovers at outside the building wall).
M&L for sub-main wiring (concealed) with two single core 6 sq mm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through including chasing cutting in any type of massinory including 25 mm dia non-metallic PVC conduit fixed in wall including 6 sq mm copper earth continuity wire, accessories and connecting to earth dolly complete, all as specified and as directed by EIC.
PUNAM ENTERPRISE
KAY BEE ASSOCIATES
M/S P K CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .