REPAIR/REPLACEMENT OF GI/CI/AC WATER SUPPLY DISTRIBUTION PIPE LINES, CLEANING OF MAIN RESERVOIR, WATER SUMP, BP TANKS AND OTHER CONNECTED WORKS INCLUDING CLEANING OF WATER CHANNEL FROM WATER MAIN RESERVOIR TO EKKO KHAD YOL MIL STN

Amount

Excavation in trenches n.exc 1.5 metre wide and n.exc 1.5 metre deep and getting out in hard/dense soil, complete all as specified and directed.

Returning filling in including spreading leveling, watering and well ramming in layers n. exc 25cm, complete all as specified and directed.

Removal of excavated material to be distance n.exc 50 metres and depositing where directed at a level n.exc 1.5m high from the starting point, complete all as specified and directed.

Cutting/boring of roads for laying of pipe of any type and size and making good road by providing soling with broken boulders or quarried stone, WBM of existing thickness and finally topping with bituminous macadum of existing thickness (bituminous macadum comprising of stone chipping and cold emulsion as per manufacturer's instructions) including necessary compaction by rolling etc. to match existing, complete all as specified and directed by Engr-In-Charge.

M & L for cleaning of water storage tank under ground type having size 3mx3m and height 2m of capacity 4000 gallons ltre capacity at USNS near slate godaam. The cleaning shall be carried out by taking cut all scale, dirt and gravel deposited at the bottom and removing sludge at a distance not exc 15m from the top circumference of the tank complete with water by adding bleaching powder to remove moulds, fungus etc and making it neat and clean, complete all as specified and directed by Engr-In-Charge.

M & L for Cleaning of uderground storage water tanks/ sump having of size of tank 25.70 metres x 45 metres and height 5.70 metres of capacity 9.24 lakhs gallon from inside taking out algee scale, dirt and gravel deposited at bottom of tank and to be disposed off to a distance not less than 15 metres from top circumference of tank including cleaning and removing sludge, algee from existing gallery of beds and removing moulds, fungus etc with water mixed with bleaching powder, complete all as specified and directed by Engr-In-Charge.

All as per Srl item No 6 above but of size of tank 18.80 metres x 12.60 metres and height 2.90 metres with partition walls of capacity 75000 lakhs gallons including back wash tank and intake chambers, complete all as specified and directed by Engr-In-Charge.

All as per Srl item No 6 above but set of 2 Nos of sedimentation tank of capacity 75,000 gallons, complete all as specified and directed by Engr-In-Charge.

Cleaning of underground/ semi underground tank of capacity 1.5lakh/2.0 Lakh gallons by adopting following method :- (a) Taking out the water from the sump with the help of Monoblock/Submersible pum set and removing accumulated sludge and solid particles etc. deposited at the bottom of sump and removing the same to a distance not exceeding 15 mtr away complete all as specified and directed. (b) washing with clean water bleaching powder sollution by rubbing with wire brush on all side walls, dome portion and bottom of the tank and removing grits and other deposited materials complete inside and from the outside of sump complete all as specified and directed.

M & L for PCC 1:3:6 type C-2 (40 mm grade atone aggregate) as in mass concrete for support of main line from main reservoir to USNS 4000 gallon capacity tank including LSNS & BOS area and repair of 4000 gallon tank, complete all as specified and directed by Engr-In-Charge.

Taking up cast iron / ductile iron water mains/pipes (including all fittings), with spigot and socket ends/ flanged ends and lead joints including burning out joints and recovering lead, including disconnecting pipes and fittings complete of size 150mm dia, complete all as specified and directed.

Taking up cast iron / ductile iron water mains/pipes (including all fittings), with spigot and socket ends/ flanged ends and lead joints including burning out joints and recovering lead, including disconnecting pipes and fittings complete of size 100mm dia, complete all as specified and directed.

Taking up cast iron / ductile iron water mains/pipes (including all fittings), with spigot and socket ends/ flanged ends and lead joints including burning out joints and recovering lead, including disconnecting pipes and fittings complete of size 80mm dia, complete all as specified and directed.

Ductile iron 150mm bore spun pipe K9 with internal cement mortar lining and external zinc coating with finishing layer of bitumen, manufactured, tested and duly marked in strict accordance with and conforming to IS: 8329/2000 (As per Indian amendment) in any length laid int renches complete all as specified and directed by Engineer in charge. Note : Jonts shall be measured and paid separately

Ductile iron 100mm bore spun pipe K9 with internal cement mortar lining and external zinc coating with finishing layer of bitumen, manufactured, tested and duly marked in strict accordance with and conforming to IS: 8329/2000 (As per Indian amendment) in any length laid int renches complete all as specified and directed by Engineer in charge. Note : Jonts shall be measured and paid separately

Ductile iron 80mm bore spun pipe K9 with internal cement mortar lining and external zinc coating with finishing layer of bitumen, manufactured, tested and duly marked in strict accordance with and conforming to IS: 8329/2000 (As per Indian amendment) in any length laid int renches complete all as specified and directed by Engineer in charge. Note : Jonts shall be measured and paid separately

Cast iron Sluice valve for water supply purpose with C.I. drilled flanged ends (integrally cast), class PN-1.6 conforming to IS-14846 of 2000, ISI marked with stainless steel spindle and iron wheel including jointing material complete such as rubber insertion packing rings with adequate size and requisite numbers nut, bolt and washer complete of the of size 150mm bore, including taking out old valve, any type, complete all as specified and directed. Note:- Flanged joints excavation and earth works will be measured and paid seperately.

Cast iron Sluice valve for water supply purpose with C.I. drilled flanged ends (integrally cast), class PN-1.6 conforming to IS-14846 of 2000, ISI marked with stainless steel spindle and iron wheel including jointing material complete such as rubber insertion packing rings with adequate size and requisite numbers nut, bolt and washer complete of the of size 100mm bore, including taking out old valve, any type, complete all as specified and directed. Note:- Flanged joints excavation and earth works will be measured and paid seperately.

Cast iron Sluice valve for water supply purpose with C.I. drilled flanged ends (integrally cast), class PN-1.6 conforming to IS-14846 of 2000, ISI marked with stainless steel spindle and iron wheel including jointing material complete such as rubber insertion packing rings with adequate size and requisite numbers nut, bolt and washer complete of the of size 80mm bore, including taking out old valve, any type, complete all as specified and directed. Note:- Flanged joints excavation and earth works will be measured and paid seperately.

Run lead joint to socket and spigot pipe and pipe fittings for 150mm bore of pipe on coming main line from main reservoir to BOSS, LSNS, USNS area, complete all as specified and directed by Engr-in-Charge.

Run lead joint to socket and spigot pipe and pipe fittings for 100mm bore of pipe on coming main line from main reservoir to BOSS, LSNS, USNS area, complete all as specified and directed by Engr-in-Charge.

Run lead joint to socket and spigot pipe and pipe fittings for 80mm bore of pipe on coming main line from main reservoir to BOSS, LSNS, USNS area, complete all as specified and directed by Engr-in-Charge.

M&L for attending complaint for any leakage of main CI/GI/DI pipe line of 150mm/100mm/80mm dia pipe for repair/leakage including tightening of joints/nuts/repair of valves etc. for smooth functioning of pipe line, complete all as specified and as directed by Engr-In-Charge.

M&L for attending complaint for any leakage of main CI/GI/DI pipe line of 50mm/40mm/32mm/25mm/20mm/15mm dia pipe for repair/leakage including tightening of joints/nuts/repair of valves etc. for smooth functioning of pipe line, complete all as specified and as directed by Engr-In-Charge.

Brick masonry valve pit of size 120x120x120cm (internal dimension) with earth work in any type of soil, plain cement concrete M-10 type C-2 as in foundation, brick work in cement mortar 1:6 (01 cement : 06 coarse sand) 23cm thick, 15mm thick plaster in cement mortar 1:4 (01 cement : 04 coarse sand) internally and externally flush pointed in same mortar as the work proceeds flooring shall be 40mm thick in plain cement concrete M-15 (Nominal mix) laid over 75mm thick hard core top cover shall be made out of mild steel sheet 3.15mm thick fixed in angle iron frame made out of angle size 40x40x6mm with two number of hinges on one side and locking aggangement at other side with 50mm pad lock complete including painting with two coats of sythetic enamel pait over a coat of red oxide primer, complete all as specified and directed.

Cast iron/ ductile iron ittings for spigot and socketed pipe i.e. bends (any type radius and angle) tapers any type (straight, bend, increasing decreasing or double socket etc) all sockets or socker and spigot collars, caps and plugs up to 150mm dia, complete all as specified and directed.

Cast iron fittings for flanged pipe i.e. bends (any type radius and angle) tapers any type (straight, bend, increasing decreasing or double socket etc) all sockets or socker and spigot collars, caps and plugs up to 150mm dia, complete all as specified and directed.

Repacking stuffing box of sluice valve spindle including taking apart and reassembling ensuring no water leakage by providing new gaskets, gland dori, nuts & bolts etc for smooth functioning of valve of size 150mm, complete all as specified and directed.

Repacking stuffing box of sluice valve spindle including taking apart and reassembling ensuring no water leakage by providing new gaskets, gland dori, nuts & bolts etc for smooth functioning of valve of size 100mm, complete all as specified and directed.

Repacking stuffing box of sluice valve spindle including taking apart and reassembling ensuring no water leakage by providing new gaskets, gland dori, nuts & bolts etc for smooth functioning of valve of size 80mm, complete all as specified and directed.

Strainer suitable for 100mm bore of pipe (AC/CI) with MS sheet 3mm thicknes including 30mm hole making on overall surface with 100mm pitch distance maintain from one hole to another in any direction and length 1200mm, fixed in poistion, complete all as specified and directed.

Strainer suitable for 80mm bore of pipe (AC/CI) with MS sheet 3mm thicknes including 30mm hole making on overall surface with 100mm pitch distance maintain from one hole to another in any direction and length 1200mm, fixed in poistion, complete all as specified and directed.

Supply only spun yarn for leakage control of any size of pipe line.

Gun metal globe or gate valves (ISI-marked) with iron wheel head, screwed both ends for iron pipe 80mm bore and fixed in repair, complete all as specified and directed.

Gun metal globe or gate valves (ISI-marked) with iron wheel head, screwed both ends for iron pipe 50mm bore and fixed in repair, complete all as specified and directed.

Gun metal globe or gate valves (ISI-marked) with iron wheel head, screwed both ends for iron pipe 40mm bore and fixed in repair, complete all as specified and directed.

Gun metal globe or gate valves (ISI-marked) with iron wheel head, screwed both ends for iron pipe 32mm bore and fixed in repair, complete all as specified and directed.

Gun metal globe or gate valves (ISI-marked) with iron wheel head, screwed both ends for iron pipe 25mm bore and fixed in repair, complete all as specified and directed.

Gun metal globe or gate valves (ISI-marked) with iron wheel head, screwed both ends for iron pipe 20mm bore and fixed in repair, complete all as specified and directed.

Gun metal globe or gate valves (ISI-marked) with iron wheel head, screwed both ends for iron pipe 15mm bore and fixed in repair, complete all as specified and directed.

Taking up or down steel tubing pipes with connection from trenches, ceilings, floors walls etc including cleaning for refixing or removing from site complete with all fittings (such as sockets, bends, elbows, unions, tees, diminishing pieces, caps and plug, Tee, short pieces etc) for 15mm dia pipe complete all as specified and directed.

Taking up or down steel tubing pipes with connection from trenches, ceilings, floors walls etc including cleaning for refixing or removing from site complete with all fittings (such as sockets, bends, elbows, unions, tees, diminishing pieces, caps and plug, Tee, short pieces etc) for 20mm dia pipe complete all as specified and directed.

Taking up or down steel tubing pipes with connection from trenches, ceilings, floors walls etc including cleaning for refixing or removing from site complete with all fittings (such as sockets, bends, elbows, unions, tees, diminishing pieces, caps and plug, Tee, short pieces etc) for 25mm dia pipe complete all as specified and directed.

Taking up or down steel tubing pipes with connection from trenches, ceilings, floors walls etc including cleaning for refixing or removing from site complete with all fittings (such as sockets, bends, elbows, unions, tees, diminishing pieces, caps and plug, Tee, short pieces etc) for 32mm dia pipe complete all as specified and directed.

Taking up or down steel tubing pipes with connection from trenches, ceilings, floors walls etc including cleaning for refixing or removing from site complete with all fittings (such as sockets, bends, elbows, unions, tees, diminishing pieces, caps and plug, Tee, short pieces etc) for 40mm dia pipe complete all as specified and directed.

Taking up or down steel tubing pipes with connection from trenches, ceilings, floors walls etc including cleaning for refixing or removing from site complete with all fittings (such as sockets, bends, elbows, unions, tees, diminishing pieces, caps and plug, Tee, short pieces etc) for 50mm dia pipe complete all as specified and directed.

Taking up or down steel tubing pipes with connection from trenches, ceilings, floors walls etc including cleaning for refixing or removing from site complete with all fittings (such as sockets, bends, elbows, unions, tees, diminishing pieces, caps and plug, Tee, short pieces etc) for 80mm dia pipe complete all as specified and directed.

Mild steel galvanised iron water tubing 15mm bore with screwed & socket joints, medium grade, galvanised, with all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. etc. fixed to wall or ceiling or laid in floor in old existing or new routes, complete all as specified and directed.

Mild steel galvanised iron water tubing 20mm bore with screwed & socket joints, medium grade, galvanised, with all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. etc. fixed to wall or ceiling or laid in floor in old existing or new routes, complete all as specified and directed.

Mild steel galvanised iron water tubing 25mm bore with screwed & socket joints, medium grade, galvanised, with all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. etc. fixed to wall or ceiling or laid in floor in old existing or new routes, complete all as specified and directed.

Mild steel galvanised iron water tubing 32mm bore with screwed & socket joints, medium grade, galvanised, with all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. etc. fixed to wall or ceiling or laid in floor in old existing or new routes, complete all as specified and directed.

Mild steel galvanised iron water tubing 40mm bore with screwed & socket joints, medium grade, galvanised, with all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. fixed to wall or ceiling or laid in floor in old existing or new routes, complete all as specified and directed.

Mild steel galvanised iron water tubing 50mm bore with screwed & socket joints, medium grade, galvanised, with all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. fixed to wall or ceiling or laid in floor in old existing or new routes, complete all as specified and directed.

Mild steel galvanised iron water tubing 80mm bore with screwed & socket joints, medium grade, galvanised, with all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc., fixed to wall or ceiling or laid in floor in old existing or new routes, complete all as specified and directed.

Mild steel galvanised iron water tubing 15mm bore with screwed & socket joints, medium grade, galvanised, with all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. etc. laid in trenches in old existing or new routes or under roads, complete all as specified and directed.

Mild steel galvanised iron water tubing 20mm bore with screwed & socket joints, medium grade, galvanised, with all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. etc. laid in trenches in floor in old existing or new routes or under roads, complete all as specified and directed.

Mild steel galvanised iron water tubing 25mm bore with screwed & socket joints, medium grade, galvanised, with all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. etc. laid in trenches in old existing or new routes or under roads, complete all as specified and directed.

Mild steel galvanised iron water tubing 32mm bore with screwed & socket joints, medium grade, galvanised, with all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. etc. laid in trenches in old existing or new routes or under roads, complete all as specified and directed.

Mild steel galvanised iron water tubing 40mm bore with screwed & socket joints, medium grade, galvanised, with all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. etc. laid in trenches in old existing or new routes or under roads, complete all as specified and directed.

Mild steel galvanised iron water tubing 50mm bore with screwed & socket joints, medium grade, galvanised, with all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. etc. laid in trenches in old existing or new routes or under roads, complete all as specified and directed.

Mild steel galvanised iron water tubing 80mm bore with screwed & socket joints, medium grade, galvanised, with all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. etc. laid in trenches in old existing or new routes or under roads, complete all as specified and directed.

15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms), fixed in repair, complete all as specified and directed.

Cleaning of surrounding area of water storage tanks/sump/ BP tanks including plants and vegetation etc. and removing and deposited the same to a distance exc 50m away, complete all as specified and directed by Engr-In-Charge.

Supply only best quality bleaching powder grade 'A' ISI marked for water treatment purpose, complete all as specified and directed by Engr-In-Charge. Make:- DCM Shree Ram / Declibac Technologies / Shre Rayaseema or as approved by MES.

Supply only Ferric alum solid cake type (25 Kg/piece) material best quality for water treatment purpose, complete all as specified and directed by Engr-In-Charge.

Supply only Best quality AQUA FIT (Calcium based granular disinfectant for water treatment, more stable than chlorine gas and stronger than bleaching powder) in 45Kg packing plastic drum, complete all as specified and directed by Engr-In-Charge. Make:- Declibac/Purichlor or equivlant in makes as approved by MES.

Cleaning of Project water channel (Approx Size 60 metre long, 5 metre wide and 6.0 metre deep) of intake water source at ekko khad for camp water supply, by taking out algae scale, dirt and gravel deposited at bottom of channel and to be disposed off to a distance not less than 15 metres from top circumference of channel including cleaning and removing sludge, algee from existing gallery of beds and removing moulds, fungus etc with water mixed with bleaching powder, complete all as specified and as directed by Engr-In-Charge.

Cleaning of old water channel including 02 chambers (Approximate size of channel 75 metre long, 1.0 metre wide and 0.75 metre deep ; one chamber of overall size 6 metrex 3 metrex 3 metre containing two compartments; one chamber of overall size 3 metrex 3 metrex 1.5 metre) of intake water source near ekko khad for camp water supply by taking out algee scale, dirt and gravel deposited at bottom of tank and to be disposed off to a distance not less than 15 metres from top circumference of channel including cleaning and removing sludge, algee from existing gallery of beds and removing moulds, fungus etc with water mixed with bleaching powder, complete all as specified and as directed by Engr-In-Charge.

Cleaning of water channel of intake water source near chowkidar hut including 01 chamber (Approximate size of channel 100 metre long, 1.0 metre wide and 0.75 metre deep ; one chamber of overall size 3 metrex 4.5 metrex1.75 metre containing four compartments) for camp water supply by taking out algae scale, dirt and gravel deposited at bottom of tank and to be disposed off to a distance not less than 15 metres from top circumference of channel including cleaning and removing sludge, algee from existing gallery of beds and removing moulds, fungus etc with water mixed with bleaching powder, complete all as specified and as directed by Engr-In-Charge.

Cast iron fittings for spigot and socketed pipe i.e. bends (any type radius and angle) tapers any type (straight, bend, increasing decreasing or double socket etc) all sockets or socker and spigot collars, caps and plugs for 200mm to 300mm dia dia, complete all as specified and as directed by Engr-In-Charge.

Cast iron fittings for flanged pipe i.e. bends (any type radius and angle) tapers any type (straight, bend, increasing decreasing or double socket etc) all sockets or socker and spigot collars, caps and plugs for 200mm to 300mm dia, complete all as specified and as directed by Engr-In-Charge.

Taking up cast iron / ductile iron water mains/pipes (including all fittings), with spigot and socket ends/ flanged ends and lead joints including burning out joints and recovering lead, including disconnecting pipes and fittings complete of size 250mm dia, complete all as specified and directed.

Ductile iron 250mm bore spun pipe K9 with internal cement mortar lining and external zinc coating with finishing layer of bitumen, manufactured, tested and duly marked in strict accordance with and conforming to IS: 8329/2000 (As per Indian amendment) in any length laid int renches complete all as specified and directed by Engineer in charge. Note : Jonts shall be measured and paid separately

M&L for attending complaint for any leakage of main CI/GI/DI pipe line of 250mm/150mm dia pipe for repair/leakage including tightening of joints/nuts/repair of valves etc. for smooth functioning of pipe line, complete all as specified and as directed by Engr-In-Charge.

Run lead joint to socket and spigot pipe and pipe fittings for 250mm bore of pipe on coming main line from main reservoir to BOSS, LSNS, USNS area, complete all as specified and directed by Engr-in-Charge.

Repacking stuffing box of sluice valve spindle including taking apart and reassembling ensuring no water leakage by providing new gaskets, gland dori, nuts & bolts etc for smooth functioning of valve of size 250mm, complete all as specified and directed.

Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed ballusters walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165 as in grating/bridge over nallah for main line coming from ekkoo khad to yol cantt, complete all as specified and as directed.

Rolled steel Plates (plain or chequered) 3mm thickness channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment including necessary welding, complete all as specified and as directed.

M&L for jointing flanged pipe of 250mm bore with rubber or fibre board gasket and fittings with nut, bolt & washers of appropriate size, complete all as specified and as directed.

M&L for jointing flanged pipe of 150mm bore with rubber or fibre board gasket and fittings with nut, bolt & washers of appropriate size, complete all as specified and as directed.

Strainer suitable for 250mm bore of pipe (DI/CI/ MS) with 2.0 mm thickness, 30mm hole making on overall surface with 100 mm pitch distance maintain from one hole to another in any direction and length 1200mm, fixed, complete all as specified and as directed.

Cast iron Air release valve, suitable for 250mm dia AC/CI/DI pipe, complete all as specified and as directed.

Cast iron Air release valve, suitable for 150mm dia AC/CI/DI pipe, complete all as specified and as directed.

Cast iron Sluice valve for water supply purpose with C.I. drilled flanged ends (integrally cast), class PN-1.6 conforming to IS-14846 of 2000, ISI marked with stainless steel spindle and iron wheel including jointing material complete such as rubber insertion packing rings with adequate size and requisite numbers nut, bolt and washer complete of the of size 250mm bore, including taking out old valve, any type, complete all as specified and directed. Note:- Flanged joints excavation and earth works will be measured and paid seperately.

M&L for Collection of sample of water in a borosil bottle sealed in presence of Engr-in-charge from water supply installation site at RTS & Depot Yol cantt, transporting and testing from Govt Lab at every six months and submitting test report of sample. The format for chemical analysis are as under:- (i) Total Dissolved solids (mg/I) (ii) Total Hardness as CaCO3 (mg/I) (iii) Calcium as Ca (mg/I) (iv) Magnesium as MG (mg/I) (v) Methal Orange Alk (mg/I) (vi) Iron as Fe (mg/I) (vii) Chloride as CL (mg/I) (viii) Sulphate as SO4 Fluoride as F (mg/I) (ix) ph (mg/I) (x) No3 (mg/I) (xi) Conductivity (micro s/CM) (xii) Turbidity (NTU) (xiii) Residual free Chlorine (mg/I) (xiv) Sodium as Na (mg/I) (xv) Total Solides (mg/I) (xvi) Fluoride as F (mg/I)

M&L for two coats of synthetic enamel painting on Valve Pit cover, doors windows, including filtration bed wall with requisite colour marking good condition including preparing surface by cleaning, rubbing and making surface smooth for painting and priming, complete all as specified and directed.

M&L for applying two coats of white wash and sheet painting as required at site to under ground/semi under ground sump including preparation of old surface and writing "Tank cleaned on the date and next due date" in white with synthetic enamel paint complete on the base of black paint, complete all as specified and directed.

Painting existing CI pipe 250/200/150/100/80mm dia with sluice valve with one coat synthetic enamel paint of black colour including preperation of surface by cleaning, rubbing and making the surface smooth for painting, complete all as specified and directed.

M & L for complete painting to bridge of span 25m to 45m and 1.5m wide made of angle iron, mild steel plate and ralling both side of bridge near Slate Godown, Khidku and near main chamber of intake point in Ekko khad including preparing surface by cleaning, rubbing and making surface smooth for painting and priming and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

smc engineering company (BID ID -3314246)