Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.5 LAccepted-AOC | 1 | Accepted-AOC LOWEST | |
| 2 | 2₹1.5 L+₹2,388.64 (1.61%)Rejected-AOC | 2 | Rejected-AOC SECOND | |
| 3 | 3₹1.5 L+₹5,427.56 (3.67%)Rejected-AOC | 3 | Rejected-AOC THIRD |
| Sl No | Description | Qty | Unit | K J SURESH BABU L1 | jithin mp L3 | Sreekala P L2 |
|---|---|---|---|---|---|---|
| 1.00RENOVATION | ||||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 0.43 | cum | 293.07 ₹126.61 Lowest | 303.8 ₹131.24 | 297.8 ₹128.65 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.43 | cum | 7,524.61 ₹3,250.63 Lowest | 7,801.3 ₹3,370.16 | 7,646.15 ₹3,303.14 |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 178.88 | kg | 188.14 ₹33,653.54 Lowest | 195 ₹34,880.63 | 191.18 ₹34,197.32 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 438.04 | kg | 152.39 ₹66,752.31 Lowest | 158 ₹69,209.69 | 154.85 ₹67,829.87 |
| 1.00 | OD435111/2025-2026:Providing and fixing 150mm UPVC square gutter pipe over GI Clamp of same profile @ 1mte C/C | 26 | metre | 285.46 ₹7,421.96 Lowest | 295.9 ₹7,693.4 | 290.07 ₹7,541.82 |
| 1.01 | OD435113/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.350 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 63.75 | sqm | 532.83 ₹33,967.91 Lowest | 552.4 ₹35,215.5 | 541.43 ₹34,516.16 |
| 1.01 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 6 | metre | 460.35 ₹2,762.1 Lowest | 477 ₹2,862 | 467.79 ₹2,806.74 |
Tender Value
₹1.7 L
EMD Value
₹4,237
Closing Date
4 Mar 2026, 10:00 amClosed
AMALU V GOPAL
o/o The Assistant Engineer, LID AND EW Section, Muzhakkunnu GP
BUILDING
2026_LSGD_840215_1
126/AE/MGP/2025-26
Open Tender
Civil Works - Buildings
Item Rate
180 days
MUZHAKKUNNU GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹4,237
Yes
15 May 2026
25 Feb 2026
5 Mar 2026
25 Feb 2026
4 Mar 2026
25 Feb 2026
RENOVATION
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD435111/2025-2026:Providing and fixing 150mm UPVC square gutter pipe over GI Clamp of same profile @ 1mte C/C
OD435113/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.350 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1416212.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.04 MB
BOQ_1416212.xls
BOQ • 0.30 MB
EPAY.pdf
Other Document • 0.28 MB
INT.pdf
Other Document • 0.23 MB
PA.pdf
Additional Documents • 0.30 MB
SBD.pdf
Tender Documents • 1.67 MB
FOT.pdf
Tender Documents • 0.34 MB
AFF.pdf
Other Document • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .