Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.4 LAccepted-AOC KHASRA NO 183 10 SHYAM VIHAR HISAR HISAR HARYANA 125001 | HISAR | HARYANA | 125001 | L1 | Accepted-AOC LOA Issued | |
| 2 | L2₹51.2 L+₹2.8 L (5.72%)Rejected-Finance | L2 | Rejected-Finance Highest | |
| 3 | Rejected-Technical 708 PREM NAGAR KARNAL HARYANA 132001 | KARNAL | KARNAL | HARYANA | 132001 | - | Rejected-Technical Non Responsive | |
| 4 | Rejected-Technical H NO 765 VPO BIHTA TEHSIL BARARA DISTRICT AMBALA 133101 | AMBALA | AMBALA | HARYANA | 133101 | - | Rejected-Technical Non Responsive | |
| 5 | Rejected-Technical H NO 787 22 JHANG COLONY ROHTAK 124001 | ROHTAK | HARYANA | 124001 | - | Rejected-Technical Non responsive |
Tender Value
₹44.7 L
EMD Value
₹89,480
Closing Date
7 Dec 2023, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
NAVEEN RATHEE
ED - Ambala
Development of Saraswati Dwar at Pehowa in Distt. Kurukshetra
2023_HRY_331048_1
20231BD43D8D A92C 4BF2 9472 4BDC8B4FB39A663BAR
Open Tender
Civil Works
Works
210 days
Ambala Cantt
Development of Saraswati Dwar at Pehowa in Distt. Kurukshetra
2 documents required · 2 mandatory
₹5,000
₹89,480
Yes
5 Jun 2024
23 Nov 2023
7 Dec 2023
24 Nov 2023
7 Dec 2023
24 Nov 2023
Amount
[23.1.1.1]COPPER WIRING IN MS CONDUIT (SURFACE/RECESS) 1.1. Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick MS conduit pipe. Group A
[23.1.5.1]COPPER WIRING IN MS CONDUIT (SURFACE/RECESS) 5.1. Wiring in MS conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin socket and 1 no 15/16 Amp switch required MS Box etc complete as required Group A
[23.22.1.9]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.9. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 6 amp to 100 amp , 25 KA
[23.22.2.1]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 2.1. MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings MCCB up to 125 A FP
[23.22.4.2]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.2. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. SPN DB Double Door 8 way ( 2 incoming and 6 outgoing)
[23.22.4.5]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.5. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. TPN DB Horizontal type Double Door 4 way ( 8 incoming and 3phase*4 outgoing)
[23.22.5.1]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.1. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole
[23.22.5.3]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.3. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Double POLE
[23.22.5.5]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.5. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp MCBs TRIPLE POLE
[23.22.5.8]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.8. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. MCBs FOUR POLE
[23.27.1]Supply and erection of Godrej Almirah typeM.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- 1. M.S. pedestal of size 600 mm wide , 750 mm high ,300 mm deep and bottom totally open , duly embeded in 1:2:4 cement concrete block of size 750 mm x 450 mm x 200 mm above ground level , having a base of size 900 mm x 600 mm x 250 mm below ground level. 0 0
[23.3.6.1]COPPER WIRING IN PVC CONDUIT (SURFACE/RECESS) 6.1. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required. 1 run of Size 1.50 Sqmm(1/1.40mm)
[23.3.6.3]COPPER WIRING IN PVC CONDUIT (SURFACE/RECESS) 6.3. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required. 1 run of Size 4 Sqmm(1/2.24mm)
[24.1.10]EARTHING AND LIGHTENING ARRESTOR 10. Providing and fixing 25 mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material.
[24.1.15]EARTHING AND LIGHTENING ARRESTOR 15. Erection only of lightning conductor GI. tape including supply of suitable GI. staples of same size.
[24.1.16]EARTHING AND LIGHTENING ARRESTOR 16. Supply and erection of 25mm dia 1.5 metre long lightning GI. tube rod tapered into a point at the top with 16cm x 16cm x 3mm thick G.I. base plate and necessary nuts and bolts with washers.
[24.1.17]EARTHING AND LIGHTENING ARRESTOR 17. Providing and fixing testing joints made of 20mm x 3mm thick G.I. strips 125 mm long with 4 nos. G.I. bolts and nuts with washers complete.
[24.1.3]EARTHING AND LIGHTENING ARRESTOR 3. Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.
[24.1.4]EARTHING AND LIGHTENING ARRESTOR 4. Earthing with tinned copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required.
[24.1.5]EARTHING AND LIGHTENING ARRESTOR 5. Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode.
[24.1.7]EARTHING AND LIGHTENING ARRESTOR 7. Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required.
[24.1.8]EARTHING AND LIGHTENING ARRESTOR 8. Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material.
[24.1.9]EARTHING AND LIGHTENING ARRESTOR 9. Providing and fixing 25 mm x5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required.
[24.4.7.1]STREET LIGHT 7.1. Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 32 mm dia
`Supply of 16 Sqmm 4 Core Armd cable, LT Power Cables - Aluminium Conductor HAVELLS BRAND Power Cables, Solid Aluminum Conductor up to 10 sq. mm and Balance Stranded Conductor, XLPE Insulated, Cores Laid Up, PVC Innersheathed complete in all respect upto the entire satisfaction of Engineer-in- charge (Make : Havells, Polycab, RR, KEI ). `
`Supply and erection of 32 Amp. 3 Pole/230V Astronomical automatic time switch of Havells make Cat No. IHXTS0306A alongwith contactor of required capacity movement controlled by precisaty quartz osciliation operation on main supply of continue to run on built in rechargeable nickel cadium cell for 150 hours in the event of power failure including cost of contractor complete in all respect upto the entire satisfaction of Engineer-in-charge of the work ( Equivalent make Havells / Indo Asian / LNT ). `
Supply, Erection, Testing and Commissioning of wall fan 400 mm size with all accessories required to complete the job in all respect up to the entire satisfaction of the Engineer in charge of the work. Make: Bajaj, Crompton, Havells.
Supply,Erection Testing and Commissioning of 40 watt Batten a trendy wall/ceiling mounted lim LED batten, with extrucded aluminium housing and polycarbonate diffuser with integrated LED Driver with all labour and Material required to complete the job in all respect up to the entire satisfaction of the Engineer in charge of the work. Make:- Bajaj, Havells, Surya.
`Supply, Erection, Testing and Commissioning of 10`` Sweep Fresh Air Fan size with all accessories required to complete the job in all respect up to the entire satisfaction of the Engineer in charge of the work. Make Bajaj, Crompton, Havells. `
SITC of 1000mm-1200mm long rigid architectural Dynamic RGBW LED Linear wall washer light with housing made of Extruded aluminium and die-cast aluminium end caps. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire’s integrated brackets shall be made of extruded aluminium and the same shall be so designed that the luminaire can be tilted from -90° to plus 15°. The luminaire shall have IP67 protection. The fixture shall have availability of beam angle of 15 and 30 degree. The optical cover shall be made toughned glass with IK06 rated. The LEDs shall have minimum CRI =80 for white light. The fixtures shall be installed with IP67 connectors. The luminaire shall have system wattage range between 20-25W and fixture should be operated with 24V IP66 external DC driver for ease of maintenance. Fixture shall be specially designed and able to sustain the operating temperature range of -20°C to 45°C . The luminaire shall have declared life of 35,000-50000 burning hours at L70 having 4 in 1, 4 pixel LED.The luminaire should have loop in loop out provision for power and DMX Signal.Luminaire shall have 4 DMX channel with Integrated DMX decoder The luminaire shall have class I insulation. The luminaire shall be capable of 8-bit control of RED, Green, Blue and White (W=4000K) to produce 16.7million colours. Following certifications/reports to be submitted.LED Fixture should be BIS Approved to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work . Make:- Philips / Wipro/ Havells / Surya / Crompton.
SITC of 200mm-250mm long rigid architectural Dynamic RGBW LED Linear wall washer light with housing made of Extruded aluminium and die-cast aluminium end caps. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire’s integrated brackets shall be made of extruded aluminium and the same shall be so designed that the luminaire can be tilted from -90° to plus 15°. The luminaire shall have IP67 protection. The fixture shall have availbility of beam angle of 15 degree and 30 degree. The optical cover shall be made of IK06 rated. The LEDs shall have minimum CRI =80 for white light. The fixtures shall be installed with IP67 connectors. The luminaire shall have system wattage range between 3W-5W and fixture should be operated with 24V IP66 external DC driver for ease of maintenance. Fixture shall be specially designed and able to sustain the operating temperature range of 0°C to 45°C . The luminaire shall have declared life of 35,000-50000 burning hours at L70 4 in 1, 4 pixel LED.The luminaire should have loop in loop out provision for power and DMX Signal.Luminaire shall have 4 DMX channel with Integrated DMX decoder. The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall be capable of 8-bit control of RED, Green, Blue and White (W=4000K) to produce 16.7million colours.LED Fixtures should be BIS approved to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work . Make:- Philips / Wipro/ Surya / Crompton / Havells.
SITC of Circular/ Rectangular shape architectural throw adjustable Dynamic RGBW LED flood light with housing made of Die-cast aluminium. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire shall be so designed that the luminaire can be tilted to ±90°. The bracket shall have locking mechanism to fix and secure the desired tilt angle. The luminaire shall have proper IP67 protection. The fixture shall have 11-15 degree beam angle the lens shall be made of anti-aging and anti UV-PMMA / PC material should be IK06 rated. The LEDs shall have minimum CRI =80 for white light .The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage range 24W-30W . Fixture should be operated with 24V IP66 external DC driver for ease of maintenance. Fixture shall be specially designed and able to sustain the operating temperature range of 0°C to 45°C . The luminaire shall have declared life of 35,000-50000 burning hours at L70 4 in 1, 4 pixel LED.The luminaire should have loop in loop out provision for power and DMX Signal.Luminaire shall have 4 DMX channel with Integrated DMX decoder The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall be capable of 8-bit control of RED, Green, Blue and White (W=4000K) to produce 16.7million colours.LED Fixture should be BIS approved to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work . Make:- Philips / Wipro /Surya / Crompton / Havells.
SITC of Circular/ Rectangular shape architectural throw adjustable Dynamic RGBW LED flood light with housing made of Die-cast aluminium. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire shall be so designed that the luminaire can be tilted to ±90°. The bracket shall have locking mechanism to fix and secure the desired tilt angle. The luminaire shall have proper IP67 protection. The fixture shall have 11-15 degree beam angle the lens shall be made of anti-aging and anti UV-PMMA / PC material should be IK06 rated. The LEDs shall have minimum CRI =80 for white light .The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage range 15W-20W . Fixture should be operated with 24V IP66 external DC driver for ease of maintenance. Fixture shall be specially designed and able to sustain the operating temperature range of 0°C to 45°C . The luminaire shall have declared life of 35,000-50000 burning hours at L70 4 in 1, 4 pixel LED.The luminaire should have loop in loop out provision for power and DMX Signal.Luminaire shall have 4 DMX channel with Integrated DMX decoder The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall be capable of 8-bit control of RED, Green, Blue and White (W=4000K) to produce 16.7million colours.LED Fixture should be BIS approved to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work . Make:- Philips / Wipro /Surya / Crompton / Havells.
SITC of Dynamic Colour Changing 4 -5Mtr long flexible RGB LED PU Coated Strip light with IP68 protection suitable for outdoor applications. Strip should have 10-15W per meter. The LED Strip should have integrated aluminium C channel for mounting. The LEDs used should be with RGB CCT, the Fixture should have Dotless Homogenous Light source with integrated diffuser as part of striplight for better rugedness and diffused illumination with low glare and DOT free illumination.Luminaire should be capable of operating at 24VDC , Driver, and controller should be with same make.Aluminium C channel should be supplied with the fixture. The luminaire shall be compatible with DMX512 controller.LED strip should be BIS approved to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work . Make:- Philips / Wipro /Surya / Crompton / Havells.
SITC of 150 W LED Driver shall be Isolated type, Constant Voltage topology driver in metal enclosure with IP 66 Protection. Output voltage 24Vdc Driver efficiency should be 85% and proper heat sink for heat dissipation suitable to operate in input voltage range of 150V to 270V (nominal rated voltage – 240V) with 3 KV internal surge protection.LED Driver should be of same make as LED light fixture. LED driver shall have output short circuit and over voltage protection inbuilt to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work . Make:- Philips / Wipro /Surya / Crompton / Havells.
SITC of 240 W LED Driver shall be Isolated type, Constant Voltage topology driver in metal enclosure with IP 66 Protection. Output voltage 24Vdc Driver efficiency should be 85% and proper heat sink for heat dissipation suitable to operate in input voltage range of 150V to 270V (nominal rated voltage – 240V) with 3 KV internal surge protection.LED Driver should be of same make as LED light fixture LED driver shall have output short circuit and over voltage protection inbuilt to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work . Make:- Philips / Wipro /Surya / Crompton / Havells.
SITC of Lighting playback controller with minimum following specifications:• DMX Output- 1024 (2x512, 2Uni.) channels • Input Ethernet (RJ45, DHCP or static IP), USB-C • Networks Ethernet, Internet, WIFI compatible when connected to a router • Multiple Zone 10 Zone, play 10 scene/sequence per time in Stand Alone • Memory o Micro SD Card ( max. 256 GB ) o 8Mb Internal memory (No SD required) • Stand Alone options o Art-Net and sACN from SD card, including triggers (4x512) o Master / Save Synchro (32 max wired / 128 max Ethernet) o Commands from the Contacts (speed, scene, dimmer, zone) o Default start scene, Scene priority, Cross Fade time between scenes o Automatic Scene Recovery if the power is cut off and 16-bit and fine channel management • Triggers options o RS232 In/Out (16 characters max for RS232 triggers, commands or orders) o UDP / Ethernet triggers and commands (from SDK) o Real Time Clock and calendar for each scene (Hour, Day, Week, Month, Year) o Lighting Palyback controller should be of same make as LED Fixtures to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work . Make:- Philips / Wipro /Surya / Crompton / Havells.
SITC of Amplifier/Splitter with 6-output DMX splitter with DMX signal boosting. This unit takes the incoming DMX signal and splits the signal into six separate output channels allowing for expanding the number of devices controlled from 32 to 6X32. Power consumption should not be more than 5W. The Compact signal amplifier shall support optically/magnetic isolation protection, protects the controllers and ensures that the DMX signal can be normally transmitted to various luminaires, improving the reliability and stability of the entire control system. The controller shall be compact in size and shall be minimum IP20 rated. Amplifier should be able to amplify the signal for up to 200m.The amplifier shall have male-female XLR connectors. On the input and output side the amplifier shall have cable with IP67 6-Pole XLR connector. Housing - MS/Aluminum The output terminals are optically isolated from the input and share a common ground reference. All six output ports have an independent output driver and ELV transformer to boost the DMX signal. 1: 6 Way DMX Splitter/Booster ,Optically isolated DMX Input/Outputs Individual coil transformer for each output ,Splitter should be of same make as LED light fixture and should be BIS approved. Surface/Rack/Floor/Celling mountable with provide mounting accessories Refined and filtered data Cable 3 core 0.75sq.mm cable to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work . Make:- Philips / Wipro /Surya / Crompton / Havells.
SITC of WL-Button 6 Flush-mounting wall panel 6 dry Button panel with a 16 port connection. Button system should have trigger to control light with responsive, reactive programming.Keypad should be of same make as LED light fixture and should be BIS approved to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work . Make:- Philips / Wipro /Surya / Crompton / Havells.
SITC of IP67 5Core T/S Type 5C Connector to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work . Make:- Philips / Wipro /Surya / Crompton / Havells.
SITC of IP67 5Core S/T Type 2 core shilded 0.5 sqmm CE approved DMX cable to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work . Make:- Hengle / Belder / D-Link
SITC of4 Channel DMX Controller with 24V DC Output. It can be programmed to give 15 kind of different Lighting conversion. DMX Controller shall be able to control the color designation, speed of conversion and brightness.IT should be ideal for connection of 5C/4C cable (V plus RGB) ).Controller should be of same make as LED light fixture and should be BIS approved System can be expanded indefinitely with 9841 cable and should Use the DIP switch to set the IP address for 512. The Controller shall provide max. output at 24 V DC to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work . Make:- Philips / Wipro / Surya / Crompton / Havells
SITC of Rectangular/ Circular shape architectural Dynamic RGBW (W=4000K) LED flood light made of Die Cast aluminium housing. The luminaire shall have powder coating finish. The luminaire shall be so designed that the luminaire can be adjusted at site to make light throw adjustments. The bracket shall have locking mechanism to fix and secure the desired tilt angle. The luminaire shall have proper IP67 protection. The fixture shall have 30/60 degree beam angle the lens shall be made of anti-aging and anti UV-PMMA / PC material. The optical cover shall be made of IK06 rated. The LEDs shall have minimum CRI =80 for white light. The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage Range 100W-110W .Fixture should be operated with 24V DC external driver for ease of maintenance. The luminaire shall have declared life of 35,000-50000 burning hours at L70 4 in 1, 4 pixel LED.The luminaire should have loop in loop out provision for power and DMX Signal.Luminaire shall have 4 DMX channel with Integrated DMX decoder. The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall be capable of 8-bit control of RED, Green, Blue and White (W=4000K) to produce 16.7million colours.LED Fixture and Driver Should Be BIS Approved to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work . Make:- Philips / Wipro /Surya / Crompton / Havells.
M/S PANJETA ELECTRICALS
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .