Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.0 LAccepted-Finance | ₹5.0 L | L1 | Accepted-Finance L1 |
| 2 | L2₹5.2 L+₹22,205 (4.45%)Rejected-Finance | ₹5.2 L+₹22,205 (4.45%) | L2 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | M/S MAA NAINA BOREWELL PROP SH. MAHESH KAPOOR L1 | Rajinder Kumar Thakur L2 |
|---|---|---|---|---|---|
| 1.00 | Transportation of suitable truck mounted DTH and ODEX / Percussion Calyx/RC driling rigs along with necessary accessories etc. to the site of work and erection of rig including levelling etc. complete in all respect as per direction of the Engineer-in-charge | 1 | Job | 4,000 ₹4,000 Lowest | 4,100 ₹4,100 |
| 2.00 | Drilling bores of 152 mm dia as per IS:2800-1979 Part-1) using DTH with ODEX attachment required drilling in collapsible strata comprising of boulders, pebbles, gravels, sand silt clay, etc. including cost of attachments, consumable stores, bits, water, POL etc. complete with system of simultaneous lowering of 125mm nominal bore, 5.0mm thick MSERW fin-cut casing pipe which will be welded together using 2.5mm or 3.25mm dia. Advani / overlinkon electrodes, with one plain end and the other end chambered to 50 degrees including removing paint on the area to be welded, inclusive of the cost of bio-degradable and non-toxic foam flush etc. complete in all respect as per directions of Engineer in charge. MSERW fin cut casing shoe and bit tube as per requirement of ODEX to be paid separately | 107 | Mtr | 2,500 ₹2,67,500 Lowest | 2,600 ₹2,78,200 |
| 3.00 | Supplying and lowering IS marked 125mm NB-5.0mm thick fin cut MSERW casing pipes as per IS: 4270-2001 dully zinc coated as per BIS: 4736 with upto date amendmenets and requirement of ODEX attachments from approved manufacturers completein all respect as per the direction of the Engineer-in-charge. | 107 | Mtr | 2,000 ₹2,14,000 Lowest | 2,100 ₹2,24,700 |
| 4.00 | Providing and fixing suitable casing shoe and bit tube asper requirement of ODEX attachment complete in all respect as per the direction of the Engineer-in-charge. | 1 | Each | 6,500 ₹6,500 Lowest | 7,000 ₹7,000 |
| 5.00 | Collection and preservation of soil samples in polythene bags complete in all respects as per direction of the Engineer-in-charge. | 1 | Each | 60 ₹60 Lowest | 65 ₹65 |
| 6.00 | Development of bore well with 1000 CFM air compressor thorugh 90° V-notch and disinfections etc. as per IS: 2800-1979 including transportation of equipments etc. to the site of work complete in all respect and to the entire satisfaction of the Engineer-in-Charge. | 1 | Job | 7,000 ₹7,000 Lowest | 7,200 ₹7,200 |
Tender Value
Refer Docs
EMD Value
₹7,350
Closing Date
17 Aug 2026, 3:00 pmClosed
EE JSV Division Jagatkhana
EE JSV Division Jagatkhana
providing drinking water facility to the rehabitation centre Swarghat in tehsil Sh. Naina Devi Ji Distt. Bilaspur HP)
2026_HPIPH_140752_1
NIT 6041-6140 Dated 06.08.2026
Open Tender
Water Equipments/ Meter/ Drilling/ Boring
Item Rate
30 days
Swarghat
Please refer Tender documents.
3 documents required · 3 mandatory
₹350
Yes
₹7,350
Yes
5 Sept 2026
7 Aug 2026
17 Aug 2026
7 Aug 2026
17 Aug 2026
7 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Transportation of suitable truck mounted DTH and ODEX / Percussion Calyx/RC driling rigs along with necessary accessories etc. to the site of work and erection of rig including levelling etc. complete in all respect as per direction of the Engineer-in-charge | 1 | Job | 100 | ₹100 |
| 2 | Drilling bores of 152 mm dia as per IS:2800-1979 Part-1) using DTH with ODEX attachment required drilling in collapsible strata comprising of boulders, pebbles, gravels, sand silt clay, etc. including cost of attachments, consumable stores, bits, water, POL etc. complete with system of simultaneous lowering of 125mm nominal bore, 5.0mm thick MSERW fin-cut casing pipe which will be welded together using 2.5mm or 3.25mm dia. Advani / overlinkon electrodes, with one plain end and the other end chambered to 50 degrees including removing paint on the area to be welded, inclusive of the cost of bio-degradable and non-toxic foam flush etc. complete in all respect as per directions of Engineer in charge. MSERW fin cut casing shoe and bit tube as per requirement of ODEX to be paid separately | 107 | Mtr | 100 | ₹10,700 |
| 3 | Supplying and lowering IS marked 125mm NB-5.0mm thick fin cut MSERW casing pipes as per IS: 4270-2001 dully zinc coated as per BIS: 4736 with upto date amendmenets and requirement of ODEX attachments from approved manufacturers completein all respect as per the direction of the Engineer-in-charge. | 107 | Mtr | 100 | ₹10,700 |
| 4 | Providing and fixing suitable casing shoe and bit tube asper requirement of ODEX attachment complete in all respect as per the direction of the Engineer-in-charge. | 1 | Each | 100 | ₹100 |
| 5 | Collection and preservation of soil samples in polythene bags complete in all respects as per direction of the Engineer-in-charge. | 1 | Each | 100 | ₹100 |
| 6 | Development of bore well with 1000 CFM air compressor thorugh 90° V-notch and disinfections etc. as per IS: 2800-1979 including transportation of equipments etc. to the site of work complete in all respect and to the entire satisfaction of the Engineer-in-Charge. | 1 | Job | 100 | ₹100 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.04 MB
PWD6.pdf
Tender Documents • 0.68 MB
PWD8.pdf
Tender Documents • 1.42 MB
TC.pdf
Tender Documents • 0.46 MB
BOQ_208813.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .