REPAIR TO JOINERY PLASTERING FLOORING AND SANITARY FITTING AT RAMPUR AND REDRESSAL OF DAY TO DAY COMPLAINTS AND COMPREHENSIVE MAINT WORKS AT RAMPUR BONIYAR MOHURA UNDER GE 969 EWS

Amount

Taking down chowkhat or frame without taking of shutter of any description n.exc 1.50 Sqm each complete all as specified and as directed.

All as per Srl item no 01 above but exc 1.50 sqm but n.exc. 4.00 sqm each, complete all as specified and as directed.

Taking down shutter of any description n exc 1 Sqm each complete all as specified and as directed.

Taking down shutter of any description exc 1 Sqm but n exc 2.00 Sqm each complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) and finished smooth and even without using extra cement including taking down old plaster complete all as specified and as directed.

M&L rendering 15mm thick in CM (1:4) on stone masonary surfaces or surfaces other than fair faces of brickwork and finishing fair & smooth without using extra cement including taking down old plaster complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 100mm thick PCC type D-2 (1:4:8) using 40mm graded agg as in sub base complete all as specified and as directed.

M&L for pre-cast concrete rubber moulded glossy finished interlocking paver Block of 60 mm thick M-35 grade any colour (as approved) and design Over sand cushioning complete including with using grey cement and pigment any shape and size confirming to IS-15658-2006 complete all as specified and as directed.

Sand filling under floor or in foundation including watering and consolidation complete all as specified and as directed.

M&L PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in coping incl necessary formwork, weathering, slightly rounded or chamfered angles including demoltion complete all as specified and as directed.

Brick work with sub-class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 including dismantling old brick or stone mansanry complete all as specified and as directed.

Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangle) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified including 15mm thick screed bed in CM (1:4) and dismantling old floor hearth or wall tile complete all as specified and as directed.

M&L Coloured glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 15mm thick mortar bed in CM (1:4) and dismantling old floor hearth or wall tile complete all as specified and as directed.

M&L vitrified coloured ceramic tiles 10mm thick (square/rectangular) polished area of each tiles exceeding 0.36 Sqm but n .exc .42 Sqm in floors etc set and jointed in neat cement slurry and pointed in whited or coloured cememtn to match dark shade tiles. all as specified including 15mm thick screed bed in CM (1:4) and dismantling old floor hearth or wall tile complete all as specified and as directed.

M & L Chequered cement concrete tiles of size 30cm x 30cm x25mm thick (with grey cement and pigments) set jointed and pointed in neat cement slurry in floor laid over and incl 15mm thick cement screed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, grinding complete all as specified and as directed.

M & L machine cut Kota stone slab flooring 20-25mm thickness per sample kept in GE's office laid over and incl 15mmthick cement screed basein CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, gridding and polishing to achive mirror finish including dismantling any type of floor hearth complete all as specified and as directed.

S&F in repair pre-painted galvalume aluminium zinc coataing GI based profile steel sheet 0.50 mm thick of any colour having tnsile strength of 550 MPA as in roof covering/cladding to wall,fixed with self tappping screw as specified incl including dismantling old sheet complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling old sheet complete all as specified and as directed.

S&F in repair PVC hollow interlocking wall/ceiling paneling of 5mm thick prelam PVC sheet. The panel & strips shall be of 600 kg / cbm density manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement. Note: Colour and shade shall be approved by GE and contractor shall not have any claim whatsoever on this account.

S&F in repair Wooden wall panelling with tongued & grooved joint laminated over high quality DHF,8 mm to 10 mm thick fixed to timber frame work, complete all as specified and as directed. Note:- Timber frame work rate included in same item.

Dismantling of wall and ceiling boards (fibre, pulp, insulation ,etc.) or insulation boards/ slab/ blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F 2nd class Hard wood plain soild,straight chowkats and frame wrought,framed rebated on soild,rounded or chamfered,put together with pinned at joints complete all as specified and as directed.

S&F 35 mm thick , 2nd class softwood plain,framed,pannelled shutters(any number of pannel),with pannel of timber flat on both sides (feather edged),or of veneered particle board medium density, wood particle board with commercial face venner; supplied and fitted to chowkats, complete all as specified and as directed.

S&F 35mm thick 2nd class soft wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted without and mitred beads for securing glass or gauge etc all as specified in SSR Pt 1sec-8.24(a) complete all as specified and as directed.

S&F 30mm thick 2nd class soft wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted without and mitred beads for securing glass or gauge etc all as specified in SSR Pt 1sec-8.24(a) complete all as specified and as directed.

S&F, butt hinges, medium weight ,cold rolled mild steel 100mm complete all as specified and as directed.

All as item No 27 above but 75 mm long complete all as specified and as directed.

S&F, Galvanised mild steel wire cloth 0.56 nominal dia of wire and width of aperture 1.18mm complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and S&F sheet glass ordinary quality 3.00 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden window frames complete all as specified and as directed.

Taking down Gl water tubing and connections and taken in to schedule of credit for 15mm bore complete all as specified and as directed.

Taking down Gl water tubing and connections and taken in to schedule of credit for 20mm bore all as directed complete all as specified and as directed.

S&F steel tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors of 15mm bore complete all as specified and as directed.

S&F steel tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors of 20mm bore complete all as specified and as directed.

S&F bib tap of CP fancy type with butterfly handle screwed down screwed for iron pipe of 15mm bore fixed in repairs complete all as specified and as directed.

S&F pillar tap cast copper ally with capstan heads, chromium plated screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe pipe and fixed with 15mm bore in repairs complete all as specified and as directed.

S&F angle valves CP screwed down high pressure of fanciy type chromium plated screwed both ends for iron pipe or for union and fixed with 15mm bore in repairs complete all as specified and as directed.

S&F Vitreous china ware wash hand basin white flat back size 550x400mm size including brackets and PVC pipe check nut complete fixing accessories incl taking out existing, complete all as specified and as directed.

M&L for Vitreous china squatting pan Orissa pattern size 580x440 mm white with integral foot rests (excluding flushing cistern and flush pipe) incl taking out existing complete all as specified and as directed.

M&L for Vitreous china Wash down water closet (Pedestal pattern), white (excluding fixing bolts, flushing cisternand flush pipe) fixed complete in repair complete all as specified and as directed.

S&F in repair Vitreous china urinal, Half Stall type flat back white (minimum), with grating and union for discharge pipe complete all as specified and as directed.

S&F PVC low level Flushing cistern of capacity 10 liters capacity fixed in repairs complete with all fittings all as specified and as directed.

S&F PVC Connection 15 mm bore with PTMT nuts of length 450mm complete all as specified and as directed.

Dismantling PVC water tanks, 500 liters capacity & removing credit to contractor complete all as specified and as directed.

Dismantling PVC water tanks. 1000 liters capacity & removing credit to contractor complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks 500 liters capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. Incl 3 no's 20mm Nipple suitable for HDPE water tank. (minimum weight 20mm-45gms complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks 1000 liters capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. Incl 3 no's 20mm Nipple suitable for HDPE water tank. (minimum weight 20mm- 45gms complete all as specified and as directed.

S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe & fixed. (Minimum weight 20mm-210gms complete all as specified and as directed.

PVC floor traps plain with gratings incl jointing to waste pipe with solvent cement dia of out let 75mm complete all as specified and as directed.

S&F in repair PVC (SWR) 75mm bore pipes single socketed in any length with rubber ring joints and fixed to wall and laid in floor trenches complete all as specified and as directed.

S&F in repair PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints and fixed to wall and laid in floor trenches complete all as specified and as directed.

S&F PVC (SWR) bends 75mm dia provided with access door complete all as specified and as directed.

S&F PVC (SWR) bends 110mm dia provided with access door complete all as specified and as directed.

S&F stop valve cast copper alloy, screwed down with high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for sizes.

15mm bore

20mm bore

S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.48mm thick with rawl plug (b) Middle and lock rail : 150x44x1.48mm thick (c) Bottom rail : 150x44x1.48mm thick (d) Top rail/style : 85x44x1.48mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty ( Make Sandhu ISI marked or its equivalent approved make) (g) Making good of wall surface to match with existing surface complete all as specified and as directed.

S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire messs fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :63x35mm X 1.48 mm thick for two tracks. (ii) Top/bottom rail and style / rail of shutter : 19x38x1.48mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlocking closing (vi) Making good of wall surfaces to match with existing surfaces complete all as specified and directed.

Taking down Aluminium door shutter with chowkat of any size and refixing in same opening with minor repair complete all as specified and as directed.

S&F 5.50mm thick sheet glass ordinary quality and glazing with oil putty or with wooden beads n.exc 0.5 sqm in each pane), complete all as specified and as directed.

M&L Al anodised barrel tower bolts of extruded section and fixed of 200mm length, complete all as specified and as directed.

All as per item 60 above but 100 mm size, complete all as specified and as directed.

S&F Aluminium alloy,anodised, sliding door bolts plate type stove enameled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple. Plate 200mm long complete all as specified and as directed.

S&F butt hinges medium weight cold rolled Aluminium anodised 100mm, complete all as specified and as directed.

S&F aluminium handle cast type adonised 150mm, complete all as specified and as directed.

M&L Preparing newly plastered surfaces of walls and applying two coat of oil bound distemper over a coat of primer complete all as specified and as directed.

S&F sheet glass shelf assembly consisting of 5.5 mm sheet glass shelf 12 cm wide with brass chromium plated bracket guard and 60 cm long complete all as specified and as directed.

S & F in repair Health faucet (CP) with 8 mm dia 1 mtr long flexible tube with wall hook complete all as specified.(Make: Jaquar cat No ALD 573) or equivalent in approved makes.

S&F CP jet spray with flexible tube 1.5 mtr long complete all as specified and as directed.

S&F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and as directed by Engineer-in-Charge

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & tom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 100mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified and as directed.

S&F Aliminium anodised barrel tower bolts, 150 mm long complete, complete all as specified and as directed.

S&F Aluminium anodised handles, cast type anodised 125 mm long complete, complete all as specified and as directed.

S&F MS decorative curtain rod 20 mm dia covered with coloured PVC layer with decorative ends incl PVC Knobs and MS Bracket both ends complete all as specified and as directed.

S & F Second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 6 and not exceeding 13 Sq. cm complete all as specified and as directed.

S & F second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with nails, cross sectional area not exceeding 3 Sq. cm complete all as specified and as directed.

M&L 2nd class soft wood Prelaminated wooden flooring in repair as in floors incl 5mm thick foam, 15mm thick, planed one side and edges tongued and grooved or rebeated as in flooring fixed with nails in floor, complete all as specified and as directed. Note: Colour and shade shall be approved by GE and contractor shall not have any claim whatsoever on this account.

S & F Waste fittings 32 mm dia, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in repair, complete all as specified and as directed.

S & F Waste fittings 40 mm dia, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in repair, complete all as specified and as directed.

S&F in wall Mixer 15 mm dai for mixing Hot and Cold water screwed down for iron pipe and fixed to wall complete all as specified and as directed.

Note:- Schedule of credit Rs. 55,540.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

M/S ABDUL MAJID LONE

MS QADRI BUILDERS

M/S S S TRADERS