WBPWD/EE/KNED/eNIT27/25-26

Supplying & fixing sheet metal (16SWG)Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and paintingas required–(As per Drawing no. 470 of PWD Specification Book – May 1991 a)415 V, 63 A b) Dimension of Al. bars[85mm long] : 4 x 20x5mm, b)Dimension of Sheet Metal Box:500x150mm

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 4 x 84/0.3 (6 sqmm) ( Make : Havells/ Polycab/ Finolex )

Supply of 2 core 10 sqmm of 1.1 KV grade alluminium XLPE, PVC/ armoured LT cable ( Make : Havells/ Polycab/ Finolex/ Glowstar )

Supply of 4 core 16sqmm 1.1kV grade XLPE A/Al armoured LT cable (Make- Havells/Polycab/Finolex/ Gloster )

Laying of cable upto 2 core 10 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Laying of cable upto 4 core 16 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below.a) 4CX16

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials a) 4CX16

Supply & Delivery of 45W LED street light luminarie IP 66,made up of pressure die cast aluminium housing with Toughened glass/ PC cover provided with high power LEDs and secondary optics PC/PMMA lens and Silicon fitled BIS registered Potted Vibration proof Driver with built in 4 KV surge protection and 10KV extemal SPD with Efficacy>110 lumen/watt or better, Impact resistance-IK1O/IKO8,CRI >70, CCT > 57OOK. Make:- Wipro DOT/Crompton, Raptor Pro/ Bajaj,EDGE NXT LED/ PANASONIC BLOOM PRO/Havells Endura Sun Down ) Driver Mk.- Philips Signify/Wipro / Xitanium/ Inventronics. LED Chip mk.-Nichia,Cree,Osram, Lumiled

Fixing outdoor type fluorescent/SV/MV light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated & sheathed wire (single core) partly in GI conduit & partly through above bracket from OH line to the fitting, without control switch, incl. making connections and painting

Supply and Fixing of Junction box (250x200x105mm) with Front side opening door and Earth stud,locking arrangement with clamp(Mk-Syntex-GSJB2520/ equivalent). Junction box having following accessories 2 Way 32A Stud type power Terminal- 1 no(Mk.-Reputed) 6A SP MCB C-curve, 10KA (MK- L&T/ Legrand/ ABB)-1 no

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire in 20mm size PVC rigid conduit 'FR'(Precision make) incl. necy. fittings as required (Make: Polycab/finolex/havells) 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 4 sqmm

Supplying & Fixing iron beam fan clamp of two piece type,as per approved specification, fabricated from 40mmx9mm MS sheet flat suitable for beam having flange upto150mm wide–(Asper Drawing no. 476 of PWD Specification Book – May 1991)

Supplying and fixing 2 way MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment 2 way

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. 32A DP

Supply & Delivery of single LED light fitting with S & F 1 no. 18W LED tube with Alluminium Heat Sink body including inbuild driver and complete accessories ( Make : Philips / CG / Havells/wipro)

Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling by screws etc.

Supply & Delivery of 1200 mm. Sweep AC, 68Watt, Safety Wire & P2 Capacitor Ceiling Fan(Colour approved by EIC) complete with blades, canopy,fork, ruber bush etc. but without regulator in following sizes: ( Make : Havells /Orient / Usha-Striker)

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supply & Delivery of 9watt LED bulb ( Make : Philips / Crompton / Havells )

Fixing only pendent light fitting

Dismentalling of existing light fittings and Ceiling fan fittings including own tools and accessories for the same as per Direction of EIC

Cleaning of light fittings/ ceiling fan including own tools and accessories for the same as per Direction of EIC

Transport charges for dismentalling light fittings and ceiling fan from site to site as per Direction of EIC

Note: 1) All the above rates should be quoted inclusive of all taxes & duties as applicable.