PUMP ROOM AT GHEMARPURA PALANPUR NAGARPALIKA’S AREA UNDER 15TH FINANCE

It.No. Item Quantity Rate Add 1% Final Rate Per Amount

1 Demolition of Brick work and stone

masonry including stacking of

serviceable materilas and disposal of

unserviceable materials with all lead

and lift. (i) In Lime

2 Excavation for foundation up to 1.5M

Depth including sorting out and

stacking of useful materials and

disposing of the excavated stuff up to

50 meter lead.(A) Loose or soft soil

3 LIME .MURRUM BULIDING RUBBISH

EARTH MANURE OR SLUDGE &

EXECAVATED ROCK AND RUBBISH

(2) EARTH 5 KM LEAD

R&B SOR(PG NO 276, ITEM CODE 92.75 102.24 1.02 103.26 Cumt

4 Providing and laying cement concrete

1:3:6 (1 Cement : 3 coarse sand :6

Crushed broken stone aggregates

mm nomial size) and curing complete

excluding cost of form work in (A)

Foundation and plinth

5 Providing and laying controlled

cement concrete M 250 and curing

complete including the cost of

formwork but excluding the cost of

reinforcement for R.C.C work in

foundation footing base. (A)

Foundations footing base of columns

and mass concrete

( Rate Analysis) 7.40 4668.00 46.68 4714.68 Cumt

6 Filling available excavated earth

(excluding rock) in trenches.

plinth, sides of foundations etc. in

layers not exceeding 20 cm. in depth

consolidating each disposited

layer by ramming and watering.

7 Filling in foundation and plinth with

murrum or selected soil in layers of

20cm. thickness including watering,

ramming and consolidating etc.

complete. (more than 10 ton)

8 Providing and laying controlled

cement concrete M 250 and curing

complete including the cost of

formwork but excluding the cost of

reinforcement for R.C.C work in

Column for upto sab level

(RATE ANALYSIS) 1.87 7785.00 77.85 7862.85 Cumt

9 Providing and laying controlled

cement concrete M 250 and curing

complete including the cost of

formwork but excluding the cost of

reinforcement for R.C.C work in Plinth

(RATE ANALYSIS ) 1.81 5644.00 56.44 5700.44 Cumt

10 Providing and laying controlled

cement concrete M 250 and curing

complete including the cost of

formwork but excluding the cost of

reinforcement for R.C.C work in Beam

(Rate Analysis) 1.81 6100.00 61 6161.00 Cumt

11 Providing and laying controlled

cement concrete M 250 and curing

complete including the cost of

formwork but excluding the cost of

reinforcement for R.C.C work in RCC

Slab for Ground floor.

(Rate Analysis ) 2.01 6466.00 64.66 6530.66 Cumt

12 Providing 15mm thick cement plaster

in single coat on Rough (Similar)side

of single or half brick walls for

interior plastering upto floor two level

and finished even and smooth in.(I)

cement mortar 1 :3 (1 cement :

13 Providing 15mm thick cement plaster 181.91+25.81

in single coat on Rough (Similar)side

of single or half brick walls for

interior plastering upto floor two level

and finished even and smooth in.(I)

cement mortar 1 : 3 (1 cement :

sand) on cellings and soffits of stairs

upto floor two level instead of

plastering on walls

14 Applying two coats of putty & two

coats of primer of approved brand and

manufacture on new wall surface to

give an even shade including

thoroughly brushing the surface free

from mortar dropping and other

foreign matter and sand

papered smooth.

15 Wall painting two coats with weather 82.36+16.36

proof acralic emulsion APEX type

paint of approved brand &

manufacture and of required shade on

exterior wall surface to give an even

shade over and including a primery

coat with alkaly resistance primer of

approved brand after throughly

brushing surface to remove all dirt

and remains of loose powdered

materials etc comp. for all height.

16 Providing and laying polished Kota

stone slab flooring over 20mm

(Average) thick base of cement

mortar 1:6 (1-cement : 6-coarse

sand) or L.M. 1.1.5 laid over and

jointed with grey cement slurry

including rubbing and polishing etc.

complete. (B) 30 mm thick (upto

17 Providing and fixing M.S. Grills of

required pattern with M.S flat at

required spacings and frame alround

square or round bars with one coat of

applying priming coat and painting

two coats on grill etc.

complete.ORNAMENTAL GRILL

(RATE ANALYSIS) 1680.00 164.33 1.64 165.98 kg

18 Providing TMT Bar FE 500D

reinforcement for R.C.C. work

including bending, binding and placing

in position complete upto floor two

19 Providing and laying broken chine

mosaic flooring for terrace using

12 mm to 20 mm broken pieces of

glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to

be tempered to bring mortar

creme out upto surface using white

cement including rounding off

junctions and extending them upto

15 cm along the wall,clearing with

water and oxalic acid etc. as directed.

20 Providing and laying controlled

cement concrete M.200 and curing

complete excluding the cost of

formwork and reinforcement for

reinforced concrete work in (C)

Lintels,Chajja upto floor two level.

(RATE ANALYSIS) 3.04 7222.00 72.22 7294.22 Cumt

21 Brick work using common burnt clay 4203.06+278.93

building brick having crushing

strength not less than 35 kg/sq. cm.

in super structure above plinth level

up to floor two level(B) Conventional

22 20 mm. thick sand faced cement

plaster on wall upto height 10 metres

above ground level consisting of

12mm thick backing coat of c.m. 1 :

(1 cement : 3 sand) and 8 mm thick

finishing coat of c.m. 1 : 1 (1 cement

: 1 sand) etc. complete

23 Distempeing (Two coats) with oil bound

distemper weather Proof of approved

brand and manufacture and of required

shade on wall surfaces to give an even

shade, over and including a priming coat

with distemper primer of approved brand

and manufacture after thoroughly brushing

the surface free from mortar dropping and

other foreign matter and also including

preparing the surface even and sand

papered smooth.

24 Providing and fixing window having

extruded Alluminium colour anodized

section frame main outer size 63.5 x

38.10 x 1.95 mm(of jindal section

Rmt),horizontal Two track member

size 61.85 x 31.75 mm x 1.20 mm (of

jindal section no;8758, @ Wt.of

0.0.659 Kg / Rmt) with sliding

shutters of horizontal member size

mm x 18mm x1.29 mm (of the jindal

section no;8949 @ Wt. of 0.456 kg/mt

), vertical member of size 40mm x

18mm x1.29mm (of jindal section

section 8948,@ 0.457 Kg/mt ) with

mm thickness transperent bronze

colours tinted float glass with powder

coated aluminium fittings and fixures

and transperent silicon sealent glass

fixing to frame as per detailos etc

complete for windows.

25 Providing and fixing rolling shutters of

approved make made of 80 mm wide

M.S. laths inter-locked together

through their entire length and jointed

together at the ends by end locks

mounted on specially designed pipe

shaft with bracket plates, guide

channels and arragements for inside

and outside locking with push-pull

operation including the cost of hood

cover and spring etc. complete. (B)

Shutters having width

26 Providing and fixing Alluminium

door partly glazed & partly pannelled

door of approved colour Andised

and standard extruded alluminium

1.301 kg. with provided single door

shutters having bottom rail 114.30 x

1.50 kg ,Vartical rail 85.00

x1.80 @ 1.301 Kg/Rmt and glazing

0.124Kg/Rmt with 5mm thick float

glass,silicon gasket and 5 mm

thick compact sheet at bottom as per

drawings 1-nos of pivot/ Hinges

nos125mm, D type 200, Alluminium

handle 2nos, lock of Apprvoed

Quality1 nos, Towabott 150mm

Nos, Floor door stopper 1 Nos

including heavy duty FLoor Spring

including fixtures & Fastening etc.

Complete (10051 P.NO. -106)

PALANPUR NAGAR PALIKA,PALANPUR

Providing, Supplying, Installation, Testing and Commissioning of Electrical Installation Work for GHEMARPURA SUMP

It.No. DISCRIPTION QTY UNIT Rate Labour WITH 1% TOTAL RS

1.0 Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires,

in following type of pipe to be erected concealed in/ on surface on wall/ceiling

complete with 6A Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC / Metallic box, single mounting base

frame covered with textured/metallic front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

1.1 (f) with medium class Rigid PVC pipe and accessories erected concealed in 10 Pts 481.00 4.81 485.81

wall/ceilling complete Cat. III

2.0 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both

are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in / flushed on wall/ceiling

complete with 6A Modular type switch and hum free EME four or more step type

electronic fan regulator with separately mounted and accessories with earth

continuity of following type erected on PVC / Metallic box, single mounting base

frame covered with textured/metallic front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as

2.1 (f) with medium class Rigid PVC pipe and accessories erected concealed in 4 Pts 668.00 6.68 674.68

wall/ceilling complete Cat. III

3.0 Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires erected in below type of pipe with 6A Modular type switches

and following type of accessories erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected. with necessary batten/angle

holder or ceiling rose or H.D.Connector as directed.

3.1 (f) with medium class Rigid PVC pipe and accessories erected concealed in 1 Pts 598.00 5.98 603.98

wall/ceilling complete Cat. III

4.0 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are 4 Pts 863.00 8.63 871.63

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected complete with Modular type switch &

pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front

plate modules erected on / in wall / ceiling as per pipe erected with following

type of accessories.

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm (

green) earthing wire from mcb d b board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling completeCat. III

5.0 Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected 4 Pts 255.00 2.55 257.55

on PVC / Metallic box, single mounting base frame covered with textured /

metallic front plate modules erected on / in wall / ceiling with following type

accessories.Cat-III

6.0 Providing following type of Modular Type Accessories mounted with pvc /

metallic box, single mounting base frame covered with textured / metallic front

plate , modules erected with necessary connection. As desired by Engineer In

6.1 (7) Blank Plate Single .Cat-III 1 No 25.00 0.25 25.25

7.0 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC fittings

& Junction boxes fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed 1)

8.0 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper 50.00 Mtr 82.00 0.82 82.82

conductor wire in following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire

of green colour for earth continuity of following size (a) with medium class Rigid

PVC pipe and accessories (b) 2 wire 2.5 sq. mm

9.0 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in / on wall / ceiling with

2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour

for earth continuity of following size.

9.1 (a) with medium class Rigid PVC pipe and accessories(i) 4 wire 10 sq. mm 10.00 Mtr 421.00 4.21 425.21

10.0 Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected

in existing pipe of following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of copper lugs,

nuts and bolts if required.

11.0 Decorative call bell Ting-tong box type 250 volts complete elected 1-6-12. 1 No 71.00 0.71 71.71

12.0 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cost

powder coated and high U.V. & corrosion resistance with diffuser housed and in

alluminum casted body with company mark/name 160V to 270V, power factor

more than 0.9 , THD < 15% ,CCT 3000 K to 6500K, Luminaire efficiency>

lumens/watt , LED driver efficiency > 85 % (Each fitting required LM-79 & LM-80

Certificates)(Note : Below Description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the

ranges shown. A)Tube Light with integral driver .IP20

12.1 (iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-III 4 No 370.00 3.70 373.70

13.0 Supplying and erecting led lamps with following wattage capacity of 220 to 240 4 No 111.00 1.11 112.11

voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable LAMP

holder (ii) 5 to 8 watts

14.0 Approved make Four pole moulded case circuit breaker having breaking capacity 1 No 6112.00 61.12 6173.12

ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed

thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all

internal connections & complete erected in existing 16 G.M.S. housing. ICS=100%

of ICU only Cat III

15.0 Approved make Four pole moulded case circuit breaker having breaking capacity 1 No 24979.00 249.79 25228.79

ICU of 50 KA at 415 V having Normal current rating up to 400A. with variable

Thermal & magnetic release suitable to work on A.C.supply 50 c/s. With all

internal connections & complete erected in existing 16 G.M.S. housing. ICS=100%

of ICU only Cat III

16.0 Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper 0.40 Rn.Mtr 7247.00 72.47 7319.47

Busbars with four equal Nos. of electrolyte bus having current density not more

than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with

colour insulating tape for phase sequence of following current carrying capacity,

erected with necessary bus bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary connections.(D) Suitable for

400 Amp. capacity

17.0 Providing and erecting Approved make RCCBs conforming to IS: 12640 and having 1 Nos 3010.00 30.10 3040.10

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for

operation on 3 phase and neutral 415V,50Hz. having characteristic of quick action

& tripping with all advance feature & do not incorporate any electronic

component for following Max. rating erected as directed (iii) 63 Amps. FP

18.0 Providing and Erecting miniature circuit breaker single pole 6A to 25A suitable to 10 No 111.00 1.11 112.11

operate on 240 V A.C. system and having breaking capacity 10 KA to be erected

in existing box. confirming to IS 8828/1996 with ISI Mark .Cat-III (3-10-1(B))

19.0 Providing and erecting Sheet Steel powder coated MCB distribution board - flush 1 No 2316.00 23.16 2339.16

/ surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same company of MCB to be used)

suitable for (B) three phase incoming and single phase horizontal type outgoing

Per phase isolation type (PPI) (b) sheet steel double door (i)4 way

20.0 Supplying & erecting earth pit of minimum bore dia.150mm size approved make 1 No 4546.00 45.46 4591.46

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made

of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-

200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and officer Incharge

has to ensure the value of earthing resistane mentioned in test Certificate) &

having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:-

0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load

& dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound

should be capable to retain moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr Back filling compound - 1 Nos Bag of 15 Kg.

21.0 Providing & erecting weather proof, dust & vermin proof, floor mounted front 0.60 sq. mtr 10365.00 103.65 10468.65

operated indoor type cubical panel board having IP-64 protection made from

SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet

for internal partitions with necessary supporting angles, flats including cutting,

bending, drilling, welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with erection of supplied switch

gears, BUSBARS, with suitable size of inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite control fuses for measuring

instruments, earth bus & earth bolts, foundation flange - bolts-base Plates,

sufficient nos. of hinged doors, handles with locking arrangement and rubber

gasket complete. The Panel shall be painted with epoxy powder coating. (The

rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding

base beams) The panel shall be supplied with following approved manufacturers

with following size.(A) locally fabricated panel board (i) with 350 mm depth

(Elect. SOR-2025-26 Chapter No.(3-16-1)

22.0 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with 4 No 1929.00 19.29 1948.29

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep

complete having 3blades with aluminium blades with , canopy & 30 cm. down

rod erected with earthing.(Make shall be approved by Engineer in charge)

23.0 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down 2.00 Mtr 107.00 1.07 108.07

rod erected duly painted for fan complete with necessary 24/ O.20, 3 core flexible

wire with earthing.

24.0 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC 4 No 107.00 1.07 108.07

bars up to 50mm length each side and pierced through a 16 Gauge M.S. box /

Heavy Duty PVC box complete erected concealed in Ceiling with necessary

25.0 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. 4 No 18.00 0.18 18.18

26.0 Supplying & erecting approved make low noise decorative exhaust fan having size 2 No 1687.00 16.87 1703.87

200mm with 1350 RPM with square frame ABS body with inbuilt lowers & square

27.0 Supplying and erecting approved make panel mounting type Digital Voltmeter 1 Nos 1263.00 12.63 1275.63

having 3 digits LED display, 0 to 750 AC Volts range erected on existing panel

board with all connection, wiring etc .with manufacturers calibration certificate.

28.0 Supplying and erecting approved make panel mounting type Digital Ammeter 1 No 1543.00 15.43 1558.43

having 3 digits LED display, external CT operated, calibrated for 0 to 1000 Amps

suitable to operate on 500 Volt AC , erected on existing panel board with all

connection, wiring etc .with manufacturers calibration certificate.

29.0 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC 1 No 314.00 3.14 317.14

Supply 500 V on existing panel board with necessary connections.

30.0 Supplying and erecting approved make suitable panel indicator LED type lamp, 1 No 43.00 0.43 43.43

lens cover, complete erected with necessary connections

31.0 Providing & erecting Switch board for Computer or electric apparatus consisting 1 No 1122.00 11.22 1133.22

of following modular type accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with necessary connections

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories Cat. III