Deposited Work

Item Quantitie Item of work Tendered Rate Total amount

Item Quantitie Item of work Tendered Rate Total amount

No. s according to

Qty. Unit In Figures In Word estiamted

Supplying and erecting Flexible PVC insulated multi

Rupees FourtySix

strand multi core 1.1 kv grade ISI marked copper wires

1 102 Mtr 46.46 Paise FourtySix

of following size to be erected as directed.

e) 1.50 Sq.mm 3 core round PVC sheathed

Providing and erecting Miniature circuit breaker

single pole 6A to 25A suitable to operate on 240 V A.C. Rupees One

2 17 Ea system and having breaking capacity 10 KA to be 112.11 Hundred Twelve

erected in existing box. confirming to IS 8828/1996 Paise Eleven Only

with ISI Mark Cat.III

Providing & erecting 415V MCB Four Pole Switch for Rupees Six

Lighting Load (B curve) having 10KA breaking Hundred

capacity & confirms to IS :8828 in existing box having ThirtyEight Paise

following capacity (b)40 Amp. Cat.III ThirtyTwo Only

Providing and erecting HOT deep Galvanised iron

4 17 Kg 77.77 Paise

strip wire 8 to 16 SWG.

Providing and erecting Pipe type earthing having 150 Rupees Three

cms.long and 2.5 cms. dia. galvanised iron pipe with Hundred

coupling and buch buried in specially prepared earth pit SixtyEight Paise

complete with necessary 8 SWG earth wire. SixtyFive Only

For using salt and charcoal / coke as required for pipe Hundred

type earthing. SeventyOne Paise

Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Aluminium Rupees One

conductor for 1.1 KV. to be laid on wall with Hundred

necessary clamps or in existing trench / pipe of Seventeen Paise

following size of cables (A) 4 Sixteen Only

Making trench(removal & re erction charges of paver

block/stone including) in soft soil of suitable width of Rupees FiftyFive

8 392 Mtr 90 cm deep for laying cable or locating the fault all 55.55 Paise FiftyFive

over the run and back filling the same and making the Only

surface as normal ground.

Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming

to IS 14930 II )with necessary connecting accessories Rupees SixtyTwo

9 425 Mtr of same material at required depth in existing trench for 62.62 Paise SixtyTwo

laying of cable. below ground / road surface for Only

enclosing cable (A)50

Supplying & erecting Galvanized M.S pipe post “B” Rupees Four

class 88.9 mm O.D 6 mtr. Long duly painted with two Thousand Four

10 17 Ea coats of aluminium paint complete with metallic base- 4440.97 Hundred Fourty

plate of 300 mm x 300 mm x 4mm thick for using as a Paise NinetySeven

compound light pole with approx. weight 47 Kg. Only

Providing 1:2:4 cement concrete foundation & 70 %

PCC from bottom including excavation for the pole of

size 45 x 45 x 100 cm. Deep in below ground level with Rupees Eight

11 17 Ea plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high 809.01 Hundred Nine

upper ground level with necessary curing and finishing Paise One Only

in approved manner.

( for 4 & 6 mtr pole)

Supplying & erecting approved make SMC press

moulded composite FRP . loop-in, loop-out approx.

2mm thick box complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged

12 17 Ea doors as per requirement having locking arrangements 476.72

SeventySix Paise

with mounting clamp with nuts, bolts & washers

SeventyTwo Only

suitable for erection on pole with cable clamps& earth

bolt of following size of box. (C)150mm x 125mm x

Supplying and erecting Street light pole bracket

comprising main B Class MS pipe of 4.2 cm/require

outside dia. complete with suitable B Class M.S. sleeve

tubing of approx. 45cms.length and suitable for

76.5mm/80mm/require size of pole top having nuts and Rupees Four

bolts for fixing the brackets and having spread of 0.5 Hundred Fifty

mtr. Length with 110 deg.with vertical plane and Paise FourtySix

suitable welded stiffener reducer and nipple with check Only

nut complete painted with one coat.of Red oxide / PU

base primer and two coats of Aluminium / PU paint.

paint with following nos of arms. [A]

Single Arm bracket 0.5 Mtr

Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed 160 to

270 V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency >

%.( fittings required LM-79 & LM-80 certificates)

(A) Street Light (IP-65), Surge protection -4KV integral,

Light must have 440VAC line supply over voltage

protection.(Phillips, Wipro, Surya, Bajaj, Havells,

Jaquare, Osram, Greatwhite & Orient make )( with

Two year complete replacement warranty & Bidder 0.00

has to submit of letest testing Certificte of NABL

approve Laboratry /ERDA testing certificate for

quality of fitting if any charges for testing ceritificate

will be paid by bidder)

17 Ea (i) 48 watts Cat-lll (Additional 10KV Non integral) 3345.12 Hundred

FourtyFive Paise

Rupees Two Lakh Eighty Thousand Four Hundred EightyTwo Paise Five Only

Note The Credit of dismentalled materials for Rs.00.00 shall be recovered from the First R.A. bill payable to the

:- contrator and there after the dismentalled materials shall be the property of the contractor.

I/We am/are willing to carry out the work at__________________% above/below (in

figures)_____________________________________percent Above / below (in words) the estimated rates mentioned above

amount of my\our tender works out as under :-

Estimated amount put to Tender Rs. _________

Deduct________% below Rs. _________

Net Amount Rs. _________

Estimated amount put to Tender Rs. _________

Net Amount Rs. _________

A I/We hereby declare that I/we have visited the site and fully acquainted my self / our selves with the local

situation regarding material,labour and other factors pertaining to the work before submitting this tender.

B I/We hereby declare that I/we carefully studied the conditions of contract, detailed technical specifications and

other tender documents of this work and agree to execute the same accordingly.

C This estimate has been prepared on the new SOR wich is exclusive of GST hence GST additional will be paid to

the agency as per existing guidelines.

(Signature of the Contractor) Deputy Executive Engineer

Electrical R&B Sub Division

Note 1 Please strike out whichever is not applicable.

2 In the case of tendered amount being quoted incorrectly the quoted pered percentage Below/Above will be

considered as final.