General RM 2024 2025 RC 2Phase 2 Zone 2 One year running contract for various PWD Roads under Roads section Pattanakkad in Alappuzha district 8 road stretches for a length of 32.87 km General RM2024 2025 General Civil Work

Amount

Appendix A- Initial rectification

2.2:Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.

5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

OD86392/2024-2025:Close Graded Premix Surfacing/Mixed Seal Surfacing:- Case I, Type - A By manual means - Providing, laying, and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-A) aggregates using penetration grade bitumen using V G 30 to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to the required level and grade.

10.5.1b:Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting trimming and finishing the surface to from a smooth continuous surface, all as per clause 3004. 2 Filling Port holes and Patch Repairs with Bituminous concrete For grading II- 13 mm (Nominal size) Material

OD86393/2024-2025:Providing and fixing of DLP board for Running contract work with Non-retro-reflectorized Vinyl sign with 1 years warranty manufactured Vinyl Printed sheeting fixed over aluminum sheeting 2 nun thick/ aluminum composite material sheeting 4 rum thick with area not exceeding 0.9 sqm, with suitable back supporting flame of MS angle 40x40x6 and supported on GI pipe pole 5Oinm NB confirming to IS 123.9 firmly fixed to the ground by means of properly designed foundation with M 1ñ grade cement concrete min size 45 cm x 4ñ cm x 60 cm, 60 cm below ground level including painting all exposed sui‘face with 2 coats of epoxy pa inting over epoxy primer and as per approved drawing and clause 801 including lettering svrnbols etc.

Appendix B-Premonsoon works

OD86384/2024-2025:Engaging Wood cutter for cutting trees and branches standing in dangerous condition

2.2:Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area

OD86385/2024-2025:Engaging Man Mazdoor

OD86386/2024-2025:JCB for removing the wood etc

OD86387/2024-2025:Engaging Tipper for removing wood and materials from road side as per the direction of Deptl Officers etc

OD86388/2024-2025:Providing wood cutting machine for cutting the trees

OD86389/2024-2025:Engaging Heavy load mazdoor

OD86390/2024-2025:Filling up pot holes with bituminous ready mix compound ( 25kg bag)and compacting and ramming to get a compact surface including of cost of material,laying charges ,transportation to the site etc complete rate is arrived for a bag of 25kg

OD86391/2024-2025:Enganging Crane for Cutting the tree

55.15:Refurbishment of existing signboardsRefurbishment of existing signboards of all size except gantry mounted ones to their original reflectivity & position by removing obstructions like overgrowth vegitation etc ,if any,washing the signboards with water & soap solution to remove all dirt, oil etc. , correcting any dislocations including minor repairs, replacement of lost nut and bolts etc complete.

Appendix C-Preventive Maintenance Works

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.

5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

OD86394/2024-2025:Filling up pot holes with bituminous ready mix compound ( 25kg bag)and compacting and ramming to get a compact surface including of cost of material,laying charges ,transportation to the site etc complete rate is arrived for a bag of 25kg

OD86395/2024-2025:Close Graded Premix Surfacing/Mixed Seal Surfacing:- Case I, Type - A By manual means - Providing, laying, and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-A) aggregates using penetration grade bitumen using V G 30 to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to the required level and grade.

4.1.B.1:Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grader on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a vibratory roller to achieve the desired density, complete as per clause 401. Grading-V - For sub-base cum drainage layer - Mix in Place Method

4.12:Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

10.5.1b:Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting trimming and finishing the surface to from a smooth continuous surface, all as per clause 3004. 2 Filling Port holes and Patch Repairs with Bituminous concrete For grading II- 13 mm (Nominal size) Material

OD86396/2024-2025:Engaging labour with passenger car not less than 1000cc for conducting and reporting routine inspection for 1Km for the entire length of project road at a frequency of 7days through out the agreement period of running contract as directed by Departmental Officers

Appendix D-Emergency Works

10.12:Clearance of land slides in soil and ordinary rock by a bull-dozer D 80 A-12, 180 HP and disposal of the same on the valley side

OD86377/2024-2025:JCB for removing the wood etc

OD86378/2024-2025:Engaging Tipper for removing wood and materials from road side as per the direction of Deptl Officers etc

8.45:Provision of metal drum/empty bitumen drum delineator, 300 mm in diameter, 800 mm high, filled with earth for stability, painted in circumferential strips of alternate black and white 100 mm wide fitted with reflectors 3 Nos of 7.5 cm dia, all as per IRC:SP:55-2001

OD86379/2024-2025:Engaging Heavy load mazdoor

OD86380/2024-2025:Engaging Wood cutter for cutting trees and branches standing in dangerous condition

OD86381/2024-2025:Providing wood cutting machine for cutting the trees

OD86382/2024-2025: :Engaging Man mazdoor for assisting wood cutter

OD86383/2024-2025:Enganging Crane for emergency works.

praveenkumar (BID ID -2029413)

Bidder Name

praveenkumar

Aravind