Loading
Loading…
Loading…
Tender Value
₹1.2 Cr
EMD Value
₹2.3 L
Closing Date
23 Jul 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TENDER
17 conditions · 3 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited.The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-I, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: The tenderer must have successfully completed or substantially completed any of the following (by any Government organizations) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
(b)(i)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for (b)(i): Separate completed works of minimum required values shall also be considered for fulfilment of technical eligibility criteria for different components. (b) (ii) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. Any work or set of works shall be considered to be a separate component, only when cost of the component is more than 2 crore each.
(b)(iii) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 2.3.3(a) (ii) of the Tender Document or through subcontractor fulfilling the requirements as per clause 2.3.3 of the Tender Document or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. Among the components of composite tender stipulated for evaluation of technical eligibility, tenderer can execute one or more specified components by engaging sub-contractor. The component(s) of work as stipulated in the tender document have to be mandatorily executed by the tenderer and others component(s) as stipulated in the tender document can be executed by the tenderer himself or by engaging sub-contractor. The components which are permitted to be executed by sub-contractor will be further classified in the tender document into those which will be considered towards technical eligibility and the remaining which will not be considered towards technical eligibility. For the component(s) which are to be mandatorily executed by the tenderer, the technical eligibility shall be assessed as per clause 2.3.2 (A) (v) (b) (i) of the tender document. In case of tenderer is JV, the Technical eligibility for the component proposed to be 1.1.1 executed by the tenderer shall be fulfilled as per clause 2.3.2 (A) (xii) and Annexure-K. The technical eligibility for such stipulated components of work for which engagement of sub-contractor is permitted shall be evaluated as per clause 2.3.3 (a) (ii) of the tender document whether it is executed by tenderer or sub-contractor. Note:- Total value of the work to be assigned to sub-contractor (s) shall not be more than 40% of total contract value. If the tenderer proposes to execute one or more of such specified components which are to be considered towards technical eligibility through sub-contractor, the tenderer is required to submit the following documents alongwith the tender in support of such sub- contractors: (i)The documents of sub-contractor regarding constitution of firm / company / Registered Trust / Registered Society / LLP / HUF, etc (as applicable) at the time of tendering as per requirement of Clause 2.4 (Constitution of Firm) of "Special Tender conditions and instruction to tenderer(s)". (ii)A formal Agreement duly notarized, legally enforceable in the Court of Law, between tenderer and sub-contractor for the component (s) of work proposed to be executed by the sub-contractor. (iii)A certificate that Sub-Contractor(s) are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders/contract on the date of opening of bids either in their individual capacity or as a member of the JV in which they were/are members. (iv)Document in support of technical credential of sub- contractor as per Clause 2.3.3 (a) (ii).
Note for Technical Eligibility Criteria: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turn over of Rs.500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered atleast 5 years prior to the date of closing of tender, shall also be considered provided the work 1.1.2 experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit alongwith work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Definition of similar nature of work: Any work of Supply, Installation, Testing and Commissioning of CCTV System using High Speed Dome/PTZ cameras/fixed Cameras and stand alone/PC based Digital Video Recorder/Network video recorder. OR AMC of CCTV System using High Speed Dome/PTZ cameras/fixed Cameras and stand alone/PC based Digital Video Recorder/Network video recorder. Note A1: Submission of 'Undertaking by the tenderer' that the Equipment shall be procured from RDSO approved source/OEM covering Supply, Installation, testing and commissioning of system including after sales support required during the warranty period".
5 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer should go through Annexure 1&2 of Tender Notice (attached in Tender Document) for list of documents require to be uploaded along with the offer.
S&T work in c/w Upgradation/Modernisation of infrastructure at Kaurha, Jwalapur, Chandausi, Roza line no. 05 & 06 and Jangbahadurganj stations goods sheds over Moradabad Division of Northern Railway
287-SIG-C-TKJ-80-26
287-SIG-C-TKJ-80-26
Open
Works - General
8 Months
Central, Delhi
₹0
₹2.3 L
23 Jul 2026
30 Jun 2026
9 Jul 2026
93 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,16,33,879.08 | ||
| — | 3050.00 | — | — | ||
| Supply of CAT-6 UTP Cable (23 AWG). It Shall comply to TEC GR No. TEC/GR/SLC - 01/02.AUG 05 (TEC Standard Number: TEC 52010:2005) with latest amendments, Version. Inspection by RITES. | — | — | — | 72,010.5 | |
| — | 40.00 | — | — | ||
| Supply & installation of 24 Port Jack Panel for CAT-6 Cable. It Shall comply to TEC GR No. TEC/GR/SLC- 01/02.AUG 05 (TEC Standard Number: TEC 52010:2005) with latest amendments,Version, Inspection by Consignee. | — | — | — | 1,37,638 | |
| — | 38.00 | — | — | ||
| "Supply, Installation, Testing & Commissioning of 8 Nos of 10/100/1000 Base-T PoE ports with 2 Nos. SFP port 120W PoE Budget with supply of 2 nos of 1G SFP Multimode optical transceiver modules as per Clause No.14 (III) of RDSO Specs.No. RDSO/SPN/TC/65/2021Ver.6.0 with Latest amendments and Versions. Inspection by RITES/RDSO." | — | — | — | 8,70,865.38 | |
| — | 230.00 | — | — | ||
| Supply of CAT-6 UTP Patch Cord of length 2 Mtr. It Shall comply to TEC GR No. TEC/GR/SLC - 01/02.AUG 05 (TEC Standard Number: TEC 52010:2005) with latest amendments,Version. Inspection by Consignee. | — | — | — | 48,442.6 | |
| — | 3300.00 | — | — | ||
| Supply of RJ-45 Connector for CAT-6 Cable. Inspection by Consignee. | — | — | — | 29,370 | |
| — | 375.00 | — | — | ||
| Supply & Installation of RJ-45 I/O box with SMB (suitable for CAT 6 UTP cable) & face plate with complete accessories. It Shall comply to TEC GR No. TEC/GR/SLC -01/02.AUG 05 (TEC Standard Number: 10 TEC 52010:2005) with latest amendments, Version. Inspection by Consignee. | — | — | — | 1,19,692.5 | |
| — | 8.00 | — | — | ||
| Supply, Installation, Testing andcommissioning of 2 KVA on line UPS with 1600 VAH back up.(3 Year Battery and UPS Warranty). Inspection by Consignee. | — | — | — | 3,19,573.36 | |
| — | 1250.00 | — | — | ||
| Cutting of passenger platform wall 150mm X 150mm deep to provide GI pipe inside the groove & repairing plateform wall by 50mm thick, CC flooring (1:2:4) & 100mm thick (1:4:8) & disposal of rubbish as per direction of site engineer of railway as a complete job. This item includes all materials required for job. (GI pipes shall be supplied by Railway). Inspection by Site Engineer. | — | — | — | 71,037.5 | |
| — | 500.00 | — | — | ||
| Chase cutting in floor / wall and restoring of floor/ wall with plaster for Concealing of 50 mm./25mm conduit pipe in floor/wall (pipe shall be supply by railway). Inspection by Site Engineer. | — | — | — | 20,875 | |
| — | 2100.00 | — | — | ||
| Supply of 25mm. dia PVC Conduit Pipe (MMS) ISI marked as per:IS 9537 part-3 with all required accessories (metal clamping ,Bends etc shall be use). Inspection by Consignee. | — | — | — | 62,685 | |
| — | 2100.00 | — | — | ||
| Flxing & laying of PVC Conduit Pipe / PVC Capping-n-casing (channel). As per instructions by Consignee. Inspection by Site Engineer | — | — | — | 25,788 | |
| — | 16100.00 | — | — | ||
| Laying of telecom cable, Data Cable, OFC cable, power cable etc. in the PVC conduit pipe / Capping-Casing. Inspection by Site Engineer | — | — | — | 1,51,823 | |
| — | 34.00 | — | — | ||
| Supply & Installation of LIU for 6X2 fiber (12 Fiber) for OFC cable with OFC patch cord minimum length 5 mtrs including splicing work. Make Legrand or Molex or Commscope or Amphenol FCI or 3C3 or of reputed make. Inspection by Consignee. | — | — | — | 2,45,936.62 | |
| — | 5.00 | — | — | ||
| Supply Installation testing & commissioning of Network video recorder 64 channel,5MP resolution preview support, play back and multiple search node control, Audio I/O supported, H.265 video compression or better, support minimum 8 SATA HDDs Support, Interfaces- RJ-45/USB 2.0 or better/RS485/Mouse, HDMI/VGA Output: 1920x1080/1280x1024/1280x720, support multi brand network cameras, ONVIF supports, Multiformat supports, Ethernet supports, Mobile software compatible with all types of mobile software, CMS software, WebCC, multiprotocol supported TCP/IP, DHCP, UDP,SMTP, NTP, DDNS. Screen Layout-1/2/4/8/9/16 & so on with Supply of 8nos of Compatible 10TB Surveillance Hard Disk with NVR. Inspection by RITES. | — | — | — | 7,44,019.6 | |
| — | 9.00 | — | — | ||
| Supply of Surveillance Hard Disk with capacity to record upto 6 TB data. Inspection by Consignee. | — | — | — | 93,606.48 | |
| — | 6.00 | — | — | ||
| Supply of RJ-11 / RJ45 Crimping Tool make D-link or Fluke or better. Inspection by Consignee. | — | — | — | 6,737.34 | |
| — | 4.00 | — | — | ||
| Supply of Krone tool (orignal Krone Make). Inspection by Consignee. | — | — | — | 3,583.56 | |
| — | 4.00 | — | — | ||
| Supply & Installation of Networking Rack 19"/42U with all accessories. Inspection by Consignee. | — | — | — | 1,74,717.6 | |
| — | 4.00 | — | — | ||
| Supply of Wiremap Tester (Network Microscanner Cable Tester) for CAT-6 and CAT-5 Cable Make Fluke Model no.MS2- 100 or equivalent specification of reputed make. Inspection by Consignee. | — | — | — | 1,61,530.72 | |
| — | 30.00 | — | — | ||
| Dome Type camera PTZ camera / Speed Dome Camera YES 2 MP (1920 x 1080 Pixel) or better) Sparsh R (SS-EN212P-(I)) with Camera Housing. Inspection by RITES. | — | — | — | 11,23,485 | |
| — | 48.00 | — | — | ||
| "Supply, Installation, Testing & Commissioning of Minimun 2MP IP Dome Camera, with HD CMOS HQ sensor minimum 1/3"", Focal Length minimum 4mm (1280 x 720) or better@ 25 fps, Min IR Range 30 m. Multiprotcol Supported, Multistreaming Supported password supported,ONVIF Supported, PoE supparted, Interface-RJ- -45, Ethernet. Inspection by RITES." | — | — | — | 2,13,034.08 | |
| — | 40.00 | — | — | ||
| Supply,Installation, Testing &Commissioning of Minimum 2MP IP Bullet Camera, with HD CMOS HQ sensor minimum 1/3", Focal Length minimum Amm, (1280 x 720) or better @ 25 fps,Min IR Range 30 m.Mutiprotcol Supported, Multistreaming Supported password supported, ONVIF Supported, PoE supparted, Interface-RJ- -45, Ethernet. Inspection by RITES. | — | — | — | 1,83,465.2 | |
| — | 4.00 | — | — | ||
| Supply of Remote Monitoring system with Intel i7 13th Gen, 16GB RAM, 1TB SDD/HDD, life time free Window and MS Office etc. Inspection by RITES. | — | — | — | 3,00,429.84 | |
| — | 320.00 | — | — | ||
| Supply of CAT-6 UTP Patch Cord of length 8 inch. It Shall be of Reputed make. Inspection by Consignee. | — | — | — | 32,310.4 | |
| — | 8.00 | — | — | ||
| "Supply & Installation of Networking Rack 19""/12U. Inspection by Consignee." | — | — | — | 61,281.04 | |
| — | 4.00 | — | — | ||
| Supply& Installation of 1 KVA UPS (APCBack-UPS Pro BR1000G-IN or equivalent specification of reputed make). ( Battery and UPS Warranty 3 Years). Inspection by Consignee. | — | — | — | 38,018.2 | |
| — | 7.00 | — | — | ||
| Supply of Single mode / Multi Mode 6 Fiber Armoured Optic Fibre Cable. It shall Comply to TEC Spec.No. G/OFC-02/03.September 2003 20 (TEC Standard Number-TEC 85010:2003). Inspection by RITES. | — | — | — | 2,15,248.32 | |
| — | 5.00 | — | — | ||
| Supply, Installation,Testing and Commissioning of Rack Mountable 24port Layer 2 POE (Minimum 370 Watt orbetter from Day 1) with 4 Nos of 10GSFP+ Uplink ports as per Clause No. 14(II) of RDSO Specs. No. RDSO/SPN/TC/65/2021 Ver.6.0 with Latest amendments and Versions with supply of 2 nos of 10G SFP+ Multimode optical transceiver modules. Inspection by RITES/RDSO. | — | — | — | 8,24,763.9 | |
| — | 5.00 | — | — | ||
| Professional Large Format Display, Size 139 cm Non Touch Screen, UHD 3840*2160, ( For 24*7 running). Inspection by RITES. | — | — | — | 2,62,066.65 | |
| — | 43.00 | — | — | ||
| Supply of single mode / multi mode single fiber 10G SFP module as per RDSO specification no. RDSO/SPN/TC/65/2021. version-6 or latest. Inspection by RITES/RDSO. | — | — | — | 3,76,141.64 | |
| — | 2300.00 | — | — | ||
| Supply of Flexible PVC insulated 3-core x2.5 sq. mm multi strand power cable. It shall conform to specification no. IS:694:1990 reaffirmed 1995 or latest. Inspection by Consignee. | — | — | — | 1,10,492 | |
| — | 180.00 | — | — | ||
| "Supply of Armored Optical fiber Patch Cord of Length 3 Mtrs (Single Mode). Blake Legrand or Molex or Comm Scope or Amphenol FCI or 3C3 or CIS or other reputed make. Connectors shall be as per site requirement. Inspection by Consignee. " | — | — | — | 1,04,112 | |
| — | 10.00 | — | — | ||
| "Supply& Fixing of HDMI cable of length 5 meter make Extron or Kramer or Crestron or of other reputed make. Inspection by Consignee." | — | — | — | 31,003.3 | |
| — | 175.00 | — | — | ||
| Fabrication ,Supply,Fixing of Cable Tray made of M.S. Sheet (with power coating) of sorts and sizes along with suitable size of MS angles/slotting angles/Clamps with painting as per requirement. Cable Tray shall be of to dimension type of (200x50x2) mm and (300x75x2) mm Inspection by Consignee. | — | — | — | 51,506 | |
| — | 8.00 | — | — | ||
| Supply and Laying of HDPE duct in the trenches, including in HDD/Manual Boring and supply pulling of Nylon rope through is at different places as per direction of Engineer incharge/ site Engineer. It includes Supply of HDPE duct outer dia 40mm and inner dia 33mm as per TEC Gr No. G/CDS-08/02 Nov /2004 with latest amendment with end cap to be provided along with the drum at both ends . (RDSO specs No. RDSO/SPN/TC/45/2013 revi 2.0) (Inspection : RITES for supply portion and Installatin by Site Engineer) | — | — | — | 5,94,266.8 | |
| — | 250.00 | — | — | ||
| HDD Boring & Trenchless of 120mm dia without HDPE pipe for laying of signalling / telecom /power cable under track/road/culvet etc cable laying is covered seperately. Inspection by Site Engineer | — | — | — | 2,47,947.5 | |
| — | 5.00 | — | — | ||
| "Supply, Installtion and Commissioning of maintenance free earth suitable kit as per RDSO Specification no. RDSO/SPN/197/2008 and Drg No. SDO/RDSO./EandB/001 dated:- 19.09.2008 and Drg No. RDSO/SDO/RDSO./EandB/002 dated:- 19.09.2008. Earthing kit consisting of earthing electrode of 17mm dia as 3m long -01 no 2 MEEB (300mmx25mmx6mm) -o1 no. 3. SEEB (150mmx25mmx6mm) -01 no 4. Earth enhancing compound - 30 kg (minimum). This includes:- Provisiion of earth connection from MEEB to SandT equipment i.e. cable sheath, apparatus case, BPAC, Axle counter, IPS, Data Logger etc. with PVC earth wire of size 10/16/25 sq.mm through copper lugs of suitable size PVC earth wire 10/16/25 sq.mm shall be supplied by Railways. Note: At certain locations, it may not be possible to acheive earth resistance of less than 1.0 ohm with one earth electrode /pit due to soil resistivity. In such cases, provision of loop earth consisting of more than one earth pit shall be done, for interconnection of two earth pits copper tape of size( 25mmx2mm) or GI flat of size (50mmx6mm) shall be provided by the contractor. The number of pits required shall be decided based on the resistance achieved for the earth pits already installed. The procedure mentioned above for one earth pit shall be repeated for other earth pits. The other earth so installed for the purpose of loop earthing arrangement shall be counted as seperate earth. (Inspection: RDSO/RITES for supply portion and installation by Site Engineer)" | — | — | — | 1,35,007.15 | |
| — | 48.00 | — | — | ||
| Supply and installation of optical fibre cable joint enclosure as per TEC spec no. GR/OJC-02/01/March 99 with latest amendment and splicing of optical fiber cables (24 fibers and testing) . This includes provision of joint pit (RCC/Prefabricated) as detailed in the technical specifications and as advised by Engineer at site. (Inspection: RITES for supply portion and Installation by Site Engineer) | — | — | — | 9,23,257.92 | |
| — | 8.00 | — | — | ||
| SITC for Router for Divisional Location(TIER-I) Router will equiped with 2 No G.703 EI Port & 3 Nos. Gbps Ethernet Port as per clause Nos. 5.0 of RDSO/SPN/TC/84/2008 Rev 0.0 or latest. Inspection by RITES/RDSO. | — | — | — | 8,66,884.56 | |
| — | 5.00 | — | — | ||
| SITC of PC Work Station as per clause 11.0 of RDSO/SPN/ TC/65/2016 Rev 4.0 or latest. Inspection by RITES/RDSO. | — | — | — | 10,41,705.2 | |
| — | 5.00 | — | — | ||
| SITC of Single Mode Media Converter as per clause 16.0 of RDSO/SPN/TC/65/2016 Rev 4.0 or latest. Inspection by RITES/RDSO | — | — | — | 25,484.4 | |
| — | 12.00 | — | — | ||
| Supply, Installation, Fixing, Foundation & Commissioning of Hot Dip Galvanised octagonal pole 5 Meter long confirming to IS: 2629/BSEN ISO:1461 latest version, manufacturer should be ISO:9001 certified firm as per technical specification given in chapter-III, para 1.1.4. Inspection by RITES. | — | — | — | 99,207.96 | |
| — | 4000.00 | — | — | ||
| Excavating and refilling of trench in Normal Soil to the level of ground with rammed earth as per drg. No.NR/S&T/CON/1. 1/97-A so as not to form a drain 0.3 Mtrs. Wide & 1 Mtr. Deep on both side of the station alongside the track. It shall conform to the safe distance as per signalling and cable plan. It also includes clearance of rooots of trees & bushes. Lesser/Deeper depth of the trench is to be paid proportionately. (.:.) Inspection by Site Engineer | — | — | — | 3,56,640 | |
| — | 20.00 | — | — | ||
| Supply, Installation,Testing & Commissioning of single mode 1G SFP module Compatible to Layer 2 switch. Inspection by RITES/RDSO. | — | — | — | 20,984.6 | |
| — | 30.00 | — | — | ||
| Supply of OFC jumper (Patch card) 10mtr. long with FC/PC and SC or suitable connector at both end as per IRS:TC-81/2000 with latest amendment.(Inspection. Consignee) | — | — | — | 19,764 | |
| — | 2.00 | — | — | ||
| Supply & Installation of 24 fiber optic patch panel (LIU)along with all accessories as per technical specification Annexure 'A'. Inspection by Consignee | — | — | — | 15,438.66 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
tender doc
ATTACHMENT
TenderDoc80-26_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .