Regarding the work of carrying out necessary repairing at Thaltej ward office in North west zone (A.R.C.)

Name of Work:- Regarding the work of carrying out necessary repairing at Thaltej ward office in North

west zone (A.R.C.)

Sr.No Oty. Item Description Rate Unit Amt.Rs.

Excavation for foundation upto 1.5 m depth including sorting out

1 and stacking of useful materials and disposing off the excavated

stuff upto 50 Meter lead.(A) Loose or soft soil

1.a 1 Upto 1.5 mt Depth 201.81 Cmt

1.b 1 1.5 to 3.0 mt.depth 222.72 Cmt

Filling in foundation and plinth with murrum or selected soil in 286.20 Cmt

2 1 layers of 20cm. thickness including watering, ramming and

consolidating etc. complete.

Providing and laying cement concrete1:5:10

(1-Cement: 5- coarses sand and:10-hand broken

stone aggregates 40mm nominal size) and curing

complete excluding cost of formworkin (A) Foundation and

Providing and laying cement concrete1:4:8 (1-Cement: 2653.67 Cmt

4- coarses and:8 hand broken stoneaggregates 40mm nominal

4 0 size) and curing complete excluding cost of formworkin (A)

Foundation and Plinth

Providing and laying cement concrete1:3:6 (1-Cement:

3- coarses sand and:6-hand broken stone aggregates 40mm

5 0 nominal size) and curing complete excluding cost 2976.00 Cmt

formworkin (A) Foundation and Plinth.

Providing and laying cement concrete 1:3:6 (1- 4006.15 Cmt

Cement:3-coarse sand:6-crushed stone aggregates 20mm

6 0 nominal size) and curing complete including cost of formwork

wall caps/coping

Providing and laying cement concrete work 1:2:4 ((1-

Cement:2- coarse sand:4-graded aggregates 20mm nominal

7 1 size) curing complete excluding cost of formwork

and reinforcement.

7.a 0 Foundations, footings, base or columns and mass concrete 3923.53 Cmt

Slabs, landing, shelves, balconies, lintels, beams, girders 4012.47 Cmt

7.b 0 and cantilivers upto floor two level

7.c 0 Independent piers, columns, and pillars, upto floor two level 3661.30 Cmt

Provdg. & laying cement concrete 1:2:4 (1 cement : 2 coarse

sand : 4 graded stone aggregates 20 mm nominal size) for

reinforced concrete chhajjas not exceeding 10 cm.

thickness upto floors two level including finishing the

8 0 exposed surfaces with cement mortar 1:3 (1 cement : 3 find 6487.07 Cu.M.

sand) to give a smooth and even surface centering and form

work and curing complete excluding cost of reinforcement.

Providing and laying controlled cement concrete / Ready

Mix Concrete of M-200 and curing complete, excluding the

9 0 cost of form work and reinforcement for reinforced concrete

9.a 0 Foundations, footings, base of columns, and mass concrete. 3977.88 Cu.M.

9.b 0 Walls from top of foundations /level up to floor Two level. 4484.17 Cu.M.

Slabs,landing,shelves,Balconies Lintels, Beams, Girders and 4460.36 Cu.M.

9.c 0.1 Cantilever upto floor

9.d 0.1 Columns, pillars, posts, and struts, up to floor two level. 4558.20 Cu.M.

9.e 0.1 Staircase up to floor two level. (excluding landing) 5418.91 Cu.M.

9.k 0.1 Vertical and horizontal fins up to floor two level. 4701.97 Cu.M.

Providing and Laying ordinary cement concrete 1:2:4

(1-Cement 2-coarsesand: 4-graded stone aggregates

mm nominal size) and finishing smooth with curing etc.

10 0 complete including the cost of form work but excluding 6241.78 Cum

the cost of reinforsement for R.C.C work in (iv) Slabs

having more than

13 cm and upto 15 cm.thickness

Providing and laying ordinary cement concrete 1:2:4 (1- Cement

2- coarse sand : 4- graded stone aggregates 20 mm nominal size)

11 0 exposed work with curing etc. complete including the cost of

formwork but excluding the cost of reinforsement for R.C.C

11a 0 (i) Slabs upto 8cm thickness 9447.57 Cum

Brick work using common burnt clay building bricks having

12 0 crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(A) Modular

12.a 2 (A) Conventional 4011.66 Cmt

12.b 2 B) Modular 4345.02 Cmt

Extra Rate for brickwork in Above Item for super structure

13 0 above plinth level upto floor two level (B) Conventional

13.a 2 (A) Conventional 272.25 Cmt

13.b 2 B) Modular 262.35 Cmt

C) above floor two level Item No. 2(6.13) (A) Modular 42.66 Per

D) above floor two level Item No. 2(6.13) (B) Conventional 40.09 Per

Providing and laying in position Ready Mixed M250 grade

concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit

mixer for a lead up to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of R.M.C. from

transit mixer to site of laying, excluding the cost of centering

14 0.25 shuttering finishing and reinforcement including cost of 4853.56 Cmt

admixtures in recommended proportions as per IS: 9103 to

accelerate/ retard setting of concrete, improve workability without

impairing strength and durability as per direction of the

Engineer - in - charge. Without Fly Ash (Min cement level as

per latest IS 456 shall be maintained) (Cement level 450 kg )

Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in Cement

15 2 mortar 1:5 ( 1-Cement : 5 coarse sand ) in foundation 583.49 Smt

and Plinth conventional brickwork

Extra for half brick masonry in super structure above

16 2 plinth level upto floor two level

16.b 1 (B) conventional 52.80 Smt

Providing form work in ordinary timber planking so as to

give a rough finish including centering, shuttering, strutting

and propping etc. height of propping and centering below

17 0 supporting floor to celling not exceeding 4 M & removal of

the same for in situ reinforced or plain concrete work

upto floor four level

Foundation, footings, bases of columns etc. and mass 171.68 Smt

17.a 5 concrete.

(B) Flat surfaces such as soffits of supspened floors slabs

17.b 1 Landings and the like. (1) Floors etc. upto 200 mm in thickness. Smt

(B) Flat surfaces such as soffits of suspended floor roof

17.c 1 slabs Landings and the like. (2) Floors etc. above 200mm in Smt

Vertical surface such as walls (any thickness) partitions and the

17.d 1 like including attached buttresses & string course & the like. Smt

(ii) Sides And Soffits Of Beam, Haunchings Cantilevers,

Girders, Bressumers And Lintels Not Exceeding 1 M

(G) Columns PillarsPosts and struts. (1) Square Rectangular 297.68 Smt

17.f 1 Polygonal in plan.

17.g 1 (2) Circular or curved in plan. 422.10 Smt

(H) (2) Sides and soffits of Beams Beam Haunchings canti-levers

17.h 1 Girders Bressumers and Lintels exceeding 1M.in Depth. Smt

Providing and fixing 35 mm thick panelled, glazed

or panelled and glazed shutters for Doors windows and clear

18 0 story windows including anodised alluminium But hinges

with necessary screws and indian teak wood shutters with.

a 1 (A) Plywood sheet panels. 3459.09 Smt

b 1 (B) Particle board panels 3464.51 Smt

c 1 (C)Hard board panels. 3433.65 Smt

d 1 (D) Asbestos sheet panels. 3406.53 Smt

Providing and fixing 25 mm thick shutters for cup boards 3006.75 Smt

19 1 etc. including black enamelled M.S. butt hinges with

necessary screws.(A) Indian teak wood. (i) Fully Panelled.

Providing and fixing 25 mm thick shutters for cupboards etc.

a 1 including anodised alluminiu butt hinges with necessary screws. Smt

(A) Indian teak wood. (ii) Fully Glazed.

Providing and fixing 25 mm thick shutters for cupboards etc. 2814.42 Smt

b 1 including anodised alluminiu butt hinges with necessary screws.

(A) Indian teak wood. (ii) Partly panelled and partl glazed.

Providing and fixing glazed louvered glass windows 4102.54 Smt

20 1 and ventilators with teak wood frame 10 cm. x 7 cm. size

including 3 coats of oil painting to wood work etc.complete.

Providing and fixing glazed louvered glass windows

and ventilators with teak wood frame 10 cm.x7 cm. size

21 1 including 3 coats of oil painting to wood work 4332.47 Smt

etc.complete.with wooden louvers plank 12mm thick

Providing and fixing 35 mm thick shutters for Doors,

windows and clere story windows including Indian teak

wood frames 10 cm x 7 cm. size including anodized

alluminium fixtures and fastenings including primer coat of

22 20 approved quality and two coats of oil painting etc, 4595.06 Smt

Providing and fixing 35 mm thick shutters for Doors,

windows and clere story windows including Indian teak

wood frames 10 cm x 7 cm. size including black enamelled iron

23 10 oxidixed fixtures and fastenings including primer coat of 5285.45 Smt

approved quality and two coats of oil painting etc, complete.(ii)

Fully Panelled.

Providing and fixing 35 mm thick shutters for Doors, windows and

clerestory windows including Indian teak wood frames 10 cm x

cm. size including anodized alluminium fixtures and

a 10 fastenings including primer coat of approved quality and two 4940.25 Smt

coats of oil painting etc, complete. (iii) Partly panelled and partly

Providing and fixing 30 mm thick FACTORY MADE SOLID

PANEL PVC DOOR SHUTTER consisting of frame made out of

M.S.tubes of 19 gauge thickness and size of 19 mm x 19 mm for

stiles and 15 mm x 15 mm for top and bottom rails.M.S. frames

hall have a coat of steel primers of approved make

and manufacture, M.S. frames hall be covered with 5 mm

thick heat moulded PVC ‘C’ channel of size 30 x 50 mm

formings tiles, and 5 mm thick 75 mm wide PVC sheets for to

prail, lock rail and bottom rail on either side, and 10 mm (5 mm x

24 2 2) thick, 1135.02 Smt

20 mm wide cross PVC sheet as gap insert for top rail

and bottom rail, Panelling of 5 stiles and rails with 30 mm wide

x 5 mm thick PVC sheet beading on eighter side, and

joined together with solventcement adhesive,. An additional

5 mm thick PVC strip of 20 mm width is to be stculkon the

interiors side of the ‘c’ channel using PVC solvent

cement adhesive etc. complete as per direction of

Engineer incharge, manufacture’s specification and drawing.

Providing and fixing in position collapsible steel shutters

with vertical channels 20 x 10 x 2 mm braced with flat iron

diagonal 20 x 5 mm size with top and bottom rails T iron 40 x

40 x 6 mm with 38 mm dia steel pulleys complete with bolts, nuts,

25 1 locking arrangements, stoppers, handles, including a 5391.23 Sq.M.

priming coat of red lead paint & approved make.

Providing and fixing 1 mm thick M.S. sheet sliding shutters

with frame and diagonal braces of 40x40x6 mm angle

iron, 3.15 mm M.S.gusset plates at Junctions and corners

mm dia. pulley, 40x40x6 mm angle and T-iron guide rail

26 2 at top and bottom respactively with handles, stoppers and 3652.12 Sqm

locking agangement etc, including applying a priming coat of

red lead paint.

Providing & Fixing in position Alluminium doors with

frame using approved quality anodised extruded

alluminium section as approved by Engg.in

charge(Jindal alluminium) (a) Frame sections 101.6x44.45 mm

(b) Shutter bottom vertical & top section 83.5x44.45

(wt.1.31 kg/mt.)(at 1.31 kg/mt) (c) Shutter bottom

section at 114.3x44.45 mm at (1.37kg/mt) Shutter

27 5 middle section at 100x44.3 wt.(1.37 kg/mt) incl.providing 2900.00 Smt

& installing 5 mm thick approved color Acrylic sheet

of standard quality fixed with glazing chips on upper pannel &

Laminated sheet on lower

pannel (wtt.0.13 kg/Rmt) etc.comp.as direction of engg.in

Providing and fixing extruded aluminum window having extruded

aluminum Colour r Powder Coated section frame main outer size

127mm x 38.10mm x 1.35mm ,@ Wt.1.384 Kg/mt,horizontal Four

track member size 122.20mm x 31.75mm x 1.10mm @ Wt.

Kg/mt,vertical member of size 122.20mm x 31.75mm x 1.50mm

,@ Wt. 1.398 Kg/mt with sliding shutters of horizontal

member size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt,vertical member of size 40mm x 18mm x 1.29mm @

wt.of 0.456Kg/mt,@ with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as

per details etc complete for window.

Providing & Fixing in position Alluminium vents with

frame using approved anodised extruded alluminium

section as approved by Engg. In charge.(Jindal

alluminium) units equivalent Approved Rate)Frame section

38.50 mm. (wt. 0.68Kg/Rmt) incl. Providing & Installing

mmthick approved color Acrylic sheet of standard quality

Providing and fixing standared extruded of alluminium

section of size 63 mmx38.10 mmx1.2 mm (Jindal

30 1 Section:2434, or equivalent @ Wt.0.643 Kg/mt) with colour 1163.92 Sq. M.

anodized alluminium frame for ventilation with 5 mm thick

frosted glass as details etc complete for Ventilation

Providing and fixing standared extruded of alluminium section of

size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt with colour

Powder Coated alluminium frame with 5 mm thick

31 2 transparent bronze colour tinted float glass as details etc 2141.88 Sq.M.

complete for Fix

Providing and laying 40 mm thick marble chips flooring

rubbed and polished (I.E.terrazo) to granolithic finish with under

layer 30 mm thick cement concrete1:2:4 (1-Cement: 2-coarse

sand: 4-graded stone aggregate 10 mm and down

gauge) and to player 10 mm thick with white, black or white and

blak marble cihps of required sizes from 1 mm to 4 mm nominal

32 3 size laid in cement marble powder mix 3:1 (3- Cement:1-Marble 811.13 Sqm

powder by weight) in proportion of 4:7 (4- Cement: 7-

marble chips by volume) (C) Medium Shade pigment

with approx 50% white cement and 50% ordinary cement

(In top layer only) (upto 10 ton)

Providing and laying marble chips skirting (Terrazo) or dedo

rubbed, and polished to Granolithic finish to player 6 mm white,

black or white and black marble chips of size from

smallest to 4 mm nominal size laid in cement marble powder

33 3 mix 3:1 (3-Cement: 1 marble powder by weight) 869.40 Sqm

in proportion of 4:7 (4-cement marble powder mix: 7-marble chips

by volume) (B) Light shade pigment with white cement (In top

Providing and laying white glazed tiles 6mm thick in flooring treads 908.17 Sq.M.

34 10 of steps and landing laid on a bed of 12mm thick cement mortar

1:3 (1-cement : 3-coarse sand ) finishing with flush

Providing and laying Ceramic tiles 6 mm thick in flooring 960.47 Sq.M.

treads of steps and landing laid on a bed of 12 mm thick cement

35 4 mortar 1:3 (1- cement :3-coarses and) finishing with flush

pointing in white cement.

Providing & Fixing 20 mm thick Mirror Polished Decorative

Granite Board with Computerised Golden Letters Discription

as per instructions of engg. in charge to M.S. frame

structure for Inaugaration & Public Handover Function

Providing and laying Vitrified tiles 8 to 10 mm thick, 36''x36''

in flooring treads of steps and landing laid on a bed of 12 mm

37 5 thick cement mortar 1:3 (1-cement:3-coarses and) finishing 1469.91 Sq.M.

with flush pointing inwhite cement.

Providing and laying Vitrified tiles 8 to 10 mm thick, 24''x24'' 1130.15 Sqm

in skrting risers of steps and dedo on 10 mm thick cement

38 3 plaster 1:3 (1- cement: 3-coarse sand) and jointed

with white cement slurry

Providing and laying Vitrified tiles 8 to 10 mm thick, in 1523.61 Sqm

skrting risers of steps and dedo on 10 mm thick cement

39 3 plaster 1:3 (1-cement:3- coarse sand) and jointed with

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in 1062.50 Sq. M.

flooring treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1- cement : 3-coarse sand ) finishing

flush pointing in white cement.

Providing and laying 24" x 24" vitrified 8 to

mm th.Double Charged Gloosy / Matt tiles of Approved

make as Approved by Adl.C.E. / Consultants for upto

cm high skirting as approved by Engineer in charge over

41 3 mm thick cement mortar 1:6 (1 cement : 6 coarse sand)on new 165.00 Rmt

surface& jointed with colour cement slurry incl with flush

pointing & cleaning the surface etc. comp.

Providing and laying polished Kota stone slab flooring over

mm (Average) thick base of cement mortar 1:6

(1-cement:6-coarses and) or L.M.1.1.5 (1-Lime

42 5 putty:1.5-coarses and) laid over and jointed with grey 982.83 Sq.M.

cement slurry mixed with pigment to match the shade of

slab including rubbing and polishing etc. complete. (A) 25 mm

Providing and laying marble stone slab flooring over 20mm

(average)base of cement mortar 1:6 (1-cement : 6 coarse sand) or

L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed with

gray cement slurry including rubbing and polishing complete.

(A) Marble slab 25mm thick

Providing and laying polished Kota stone slab flooring over

mm (Average) thick base of cement mortar 1:6

44 5 (1-cement:6-coarses and) or L.M.1.1.5 laid over and 1085.48 Sq.M.

jointed with grey cement slurry including rubbing and

polishing etc.complete. (B) 30 mm thick

Providing and laying polished kota stone slab 25 mm thick

in risers of steps, skirting Dedo and pillars laid on 10 mm

thick cement mortar 1:3 (1-Cement :3 coarses and) and

45 1 jointed with gray cement slury mixed with pigment to 1176.03 Sq.M.

match the shade of slab including rubbing and polishing

Providing and laying cement concrete flooring 1:2:4

(1-cement: 2-coarses and:4-graded stone aggregate

46 2 20mm nominal size) laid in one layer and finished with a 297.68 Sq.M.

floating coat of neat cement. (A) 40mm thick.

Providing and laying cement concrete flooring 1:2:4

(1-cement: 2-coarse sand:4-graded stone aggregate

47 2 20mm nominal size) laid in one layer and finished with a 348.08 Sq.M.

floating coat of neat cement. (B) 50mm thick.

Providing and laying broken china mosaic flooring for terrace

using 12 mm to 20 mm broken pieces of glazed tiles to be laid

over cement mortar 1:3 to plain or slope and to be tempered to

bring mortar creme out upto surface using white cement

48 5 including rounding off junctions and extending them up to15 739.89 Sqm

cm along the wall, clearing with water and oxalic acid

etc.as directed.

Providing and laying coloured glazed tiles of the size

300 mmx200 mmx8 mm/300 mmx450 mmx8 mm in

49 0 skirting, risers of steps and dedo on 10 mm. thick cement 1426.95 Sqm

plaster 1:3 (1cement: 3 coarse sand) & jointed with white

Providing corrugated G.I. sheet of class-3 roofing fixed with 719.93 Sqm

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter with

50 0 bitumen and G.I. limpet washer or G.I. limpet washer. filled with

white lead complete excluding the cost of purlins, Rafters and

Trusses.(1) 0.80 mm thick sheet

Providing and fixing 150 mm wide 450 mm over all semi circular

plain G.I.sheet class-3 gutter with Iron brackets 40 mmx3 mm

51 0 size Bolts, Nuts, washers etc. including making necessary 555.71 Sqm

connection with rain water pipes. (i) 0.80 mm thick Sheet.

Providing and fixing five courses water profing treatment

with bitumen felt consisting of second and fourth course of

blown/ bitumen or/and residual bitumen applied hot at

1.2 kg.per Sq.M.of area for each course and first course

with fibre base bitunen saturated under lay type land

52 0 third course with fibre base self finished felt type 2 grade 1 and 466.84 Sqm

fifth and final course of stone grit 6 mm and down size or pea

sizes gravel spread at

Cu.Metre/Sq.metre preparation of surface excluding

grading complete.

Providing and fixing on wall face C.I. Rain water pipe including 283.62 Rmt

filling the joints with spun yarn soaked in neat cement slurry and

53 0 cement mortar 1:2(1- Cement : 2-fine sand) (A) 75

Providing 15 mm thick cement plaster in single coat

on Rough (Similar) side of single or half brick walls for

54 15 interior plastering up to floor two level and finished even and 174.83 Sqm

smooth in (i) Cement mortar 1:3 (1-cement :3-sand)

Providing 20 mm thick sand faced cement plaster on walls upto

height 10 metres above ground level consisting of 12mm

55 15 thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm 297.68 Sqm

thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Colour washing with lime on wall surface (two coats) over

and including a primary coat of white washing to give an

56 8 even shade after through brooming the surface to remove all 12.29 Sqm

dirt, dust, mortar drops and other foreigh matter.

Removing dry or oil bound distemper by a 11.19 Sqm

57 3 washing and scraping and sand papering the wall surface

smooth including necessary repairs to scratches complete.

Distempering with dry distemper of approved brand and

manufacture (two coats) and of required shade on wall

surfaces of given an even shade, over and including a

priming coat of whiting after thoroughly brooming the

surface free from mortar dropping and other foreign matter.

Distempeing (Two coats) with oil bound distemper of

approved brand and manufacture and of required shade on

wall surfaces to give an even shade, over and including a

priming coat with distemper primer of approved brand

59 141 and manufacture after thoroughly brushing the surface 76.08 Sqm

free from mortar dropping and other foreign matter and

also including preparing the surface even and sand papered

Extra Coat for Above Item over above for

60 3 every subsequent coat of approved brand and manufacture. Sqm

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

61 40 surface to give an even shade including throughly brushing the 78.44 Sqm

surface free from mortar droppings and other foreign

matter and sand papered smooth.

Extra over item for every sub sequent coat of wall painting 33.39 Sqm

62 23.40557 with plastic emulsion paint of approved brand

Applying priming coat over new steel and other metel

surface after and including preparing the surface by

throughly cleaning, oil, grease, dirt and other foreign

matter and scoured with brushes fine steel wood, scrapers and

sand paper with ready mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel

and other metal surface with enamel paint, brushing, interior to

give an even shade including cleaning the surface an even

64 44 shade including cleaning the surface of all dirt, dust and 86.94 Sqm

foreign matter.

Painting one coats (excluding priming coat) on

previously painted steel and other metal surface with

65 17 enamel paint, brushing to give an even shade including 54.35 Sqm

cleaning the surface of all dirt, dust and other foreign matter.

66 8 Extra over item for every sub sequent coat of paint. 50.40 Sqm

Painting two coats (excluding priming coat) on new steel

and other metal surface with synthetic enamel paint, brushing

67 3 to give an even shade including cleaning the 64.66 Sqm

surfaceofalldirt,dust and other foreign matter.

Painting one coats (excluding priming coat) on

previously printed steel and other metal surface with synthetic

68 3 enamel paint, brushing to give an even shade including 43.79 Sqm

cleaning the surface of all dirt, dust and other foreign matter.

69 2 Extra over Above item for every sub sequent coat of paint. 43.47 Sqm

Painting two coats (excluding priming coat) on

external surface of new rain water, soil, waste and vent

70 3 pipes and fittings with ready mixed bituminous brushing, 20.16 Sqm

black, anti corrosive to give an even shade including

cleaning of all dirt, dustand other foreign matter.(75 mm dia)

Painting two coats (excluding priming coat) on

external surface of new rain water, soil, waste and vent

71 3 pipes and fittings with ready mixed bituminous brushing, 25.05 Sqm

black, anti corrosive to give an even shade including

cleaning of all dirt, dust and other foreign matter.(100 mm dia)

Painting two coats (excluding priming coat) on new wood

and wood based surface with enamel paint, interior to give

an even shade including cleaning the surface of all dirt,

dust and other foreign matter sand papering and stopping. (a)

Ready mixed paint brushing wood primier pink.

Painting one coats (excluding priming coat) on

previously painted wood and wood based surface with

enamel paint, to give an even shade including cleaning the of

73 15 all dirt, dust and other foreign matter.(b) Ready mixed 26.78 Sqm

paintbrushing priming for

74 2 Extra over Above item for every sub sequent coat of paint. 24.26 Sqm

Painting two coats (excluding priming coat) on new wood

and wood based surface with ready mixed paint, brushing,

75 10 oil, gloss, semi gloss to give and even shade including cleaning 104.12 Sqm

of all dust, dirt and other foreign matters and papering and

Finishing wall with weather proof exterior emulsion paint on

wall surface (two coats) to give an required shape even

76 10 shade after thoroughly brushing the surface to remove all dirt, 113.40 Sqm

and remains of loose powdered materials.etc complete

Applying two coats of Birla (white cement based) or

Asian (acryliclapy-putty) or equivalent & two coats of primer of

approved brand and manufacture on new wall surface to give

77 10 an even shade including thoroughly brushing the surface free 40.19 Sqm

from mortar dropping and other foreign matter and sand

papered smooth.

Painting one coats (excluding priming coat) on previously painted

wood and wood based surface with enamel paint, to give an even

78 10 shade including 55.13 Sq.M.

cleaning the of all dirt, dust and other foreign matter.

Writing letter or figures on any surface with black japan 3.15 per

paint (stops, comas, hyphens and the like not to be letter

79 10 measured and paid for separately) (i) Block per

(Letters/Figures) (Per 10 Letter pet CM.HT) Cm/Ht

Demolition including stacking of serviceable materilas and

80 1 disposal of unserviceable materials with all lead and lift. (i) Cu.M.

Demolition of Brick work and stone masonry including 544.95 Cu.M.

81 0.2 stacking of serviceable materil as and disposalof unserviceable

materials with all lead and lift.(ii) In Cement Mortar.

Dismentaling tiled of stone floors laid in mortar including

82 2 stacking of serviceable materil as and disposal of unserviceable Sqm

materials with all lead and lift.

Dismentaling of sheet roofing including ridges, Hips, 47.25 Sqm

Valleys, Gutters etc. stacking of serviceable materil as and

83 0 disposal of unserviceable materials with all lead and lift.(i)

G.I.sheet roofing.

Dismentling steel work including distempering and 2.42 Kg.

84 16 stacking the materials with all lead and lift.

Dismentling doors, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraves, hold fasts

85 2 and other attachment etc. complete and stacking the 185.85 Each

material within all lead and lift.(i) Not exceeding 3 Sq.M. in area.

Dismentling doors, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraves,hold fasts

86 2 and other attachment etc. complete and stacking the 248.85 Each

material with in all lead and lift.(ii) Exceeding 3 Sq.M.in area.

Dismentling barbed wire in fencing including making rolls and

also including dismentling fencing posts including all earth work

concrete in base and making good the disturbed ground

87 9 stacking useful materials as directed and disposing 66.15 Rmt

as directed and disposing of the unserviceable

materials with all lead and lift.

Dismentling C.I. pipes G.S.W. pipes abd A.C. rain water

88 9 pipes with fittings and clamps including stacking the materials Rmt

with all lead and lift (for any dia, of pipe)

Dismantling santtary fittings like wash basin . W.C. pan Indian

89 1 and Europe an type, flushing tank etc. including stacking the Each

materials with all lead and lift

Scraping oil paint from steel and other metal surface

90 9 and making the surface even (with Hand Scraping.) Smt

Removing and scraping of old deteriorated plaster of

any thickness from wall / R.C.C member including

91 2 stacking of serviceable material and disposal of 19.38 Smt

unserviceable from site of work with all lead and lift

Providing and fixing M.S. fan clamps of shape

and size as specified in existing R.C.C. slab including

chase and making good.

Cutting out cracks of roof terrace to V-section, cleaning

out, wetting, grouting with cement and sand slurry 1:3 (1-

93 2 cement Rmt

Cutting out cracks roof terrace to V-Section cleaning out and

94 2 filling solidly with a hot mixture of bitumen and clean dry Rmt

sand (1:1 by weight)

Providing & Fixing in position Alluminium doors with frame

using approved quality anodised extruded alluminium

section as approved by Engg.in charge(Jindal alluminium)(a)

Frame sections 101.6x44.45 mm (b) Shutter bottom

vertical & top section 83.5x44.45 (wt.1.31 kg/mt.)(at

1.31 kg/mt) (c) Shutter bottom section at 114.3x44.45 mm at

95 1 (1.37 kg/mt) Shutter middle section at 100x44.3 wt.(1.37 2900.00 Sq. M.

kg/mt) incl.providing & installing 5 mm thick approved

color Acrylic sheet of standard quality fixed with glazing

chips on upper pannel & Laminated sheet on lower pannel

(wtt.0.13 kg/Rmt) etc.comp.as direction of engg.in

Providing & Fixing in position Fully Panelled / Partly Panelled

Partly Glazed / Fully Glazed Alluminium doors with frame

using approved quality anodised extruded

alluminium section as approved by Engg. In charge.(Jindal

alluminium )(a) Frame sections 101.6x44.45 mm b) Shutter

vertical & top section 83.5x44.45 (wt. 1.31 kg/mt.)( at

1.31 kg/mt) © Shutter bottom section at 114.3 x44.45mm at (

1.37 kg/mt ) Shutter middle section at 100x44.3 wt. (1.37

kg/mt ) incl. providing & installing 5 mm thick Glass of

standaed quality fixed / 12 mm thick Laminated sheet with

glazing chips (wt. 0.13 kg/ Rmt) in panels etc. comp. as per

Detail Given & direction of engg.in charge.

Providing & Fixing in position Alluminium window 2/3/4

track sliding / fix type with frame using approved

anodised extruded alluminium section as approved by Engg.

97 1 In charge.(Jindal alluminium) units equivalent. 4518.00 Sq. M.

including P/F installing 5 mm thick clear/tinted Glass of

standard quality etc.comp.

Providing & Fixing in position Alluminium vents with

frame using approved anodised extruded alluminium

section as approved by Engg. In charge.(Jindal

98 1 alluminium) units equivalent Frame section of 63.50 x 38.50 4218.00 Sq. M.

mm. (wt.0.68 Kg/Rmt) incl. Providing & Installing 5 mm

thick Glass of standard quality etc. comp.

Providing and fixing of Ridge flashing for roof panel

shall be made out of 0.5 mm thick pre coated GI sheet.

The Pre coatedsheet shall be of minimum 240 mpa steel

grade confirming to IS 14246:1995 and shall have zinc

coating of minimum 120 gsm as per IS:277:1992, 5-7

microns epoxy primer on both side of the sheet and polyester

top coat 15-18 micron. The PP GI Sheet shall have plastic

protective guard film of minimum 25 microns to

avoid scratches during transportation. The ridge shall be fixed

to the steel members by poprivetor self drilling/self

stitching fastners @ maximum 450mm c/c along

length of capping/flashing etc complete .

Supplying and fixing vinyl flooring over the surface having 1-

100 1 2 mm thickness as per directed by engineer incharge 963.00 Smt

etc as completed (N.S.)

Providing and laying 15mm bamboza wooden flooring

as per architect's drawing with all necessary details as

101 1 directed by the project consultants. Use underlay for 2690.00 Smt

better result as per Detail specifications and directed by the

project consultants. (N.S.) Approved Rate )

Providing and fixing 1.20 Metre high fencing with

Metre long M.S. Angle posts 40 mm x 40 mm x 6 mm and oil

painting 3 coats fixed at 2.5 Mt, C/c. with five Horizontan

lines and two diagonals of galvanised steel barbed wire

102 1 weighting 9.38 Kg. per 100 Metre, strained and fixed to posts 385.40 Rmt

with G.I, staples including fixing the posts in ground with

M x 0.5.M x 0.5 M. block in C.C 1:5:10 etc complete.

Renovation and Repairing work in Chainlink fencing any 735.00 Rmt.

size and also refixing work incl. febrication work with all

103 1 materails to be painted one coat of primer and twocoats of

paint as directed inline and level. (N.S.)

Constructing a sink (chowkedi) with C.C. 1:2:4, 12 cm.

thick over B.B. masonry in C.M, (1:6) in front and dwarf wall

Mt. high and 23 cm. thick cement plaster to masonry / in

C.M.1:3) and cement concrete flooring in 1:2:4: mix

5cm.dia.drain pipe etc.complete.

Constructing a cooking platform 60 cm. width and 70 cm high

resting on B.B. Masonry walls 23 cm. thick in C.M. (1:6) with

(i) Fixing or precast R.C.C. 1:2:4) 8 cm. thick slab with

105 1 marble chips set in C.M. (1:6) (6 mm thick terrazo)

with plastering on exposed faces walls in C.M. (1:4) etc

Extra rate for using Ready Mix Concrete of any grade for

below ground level to vertical upto any floor with delivery

& suction Pipe & Pump etc. The rate includes fule, pump

operator, skilled labor, driver etc completed and as per direction

of engineer in charge

P/A Tremix with dewartering machine and floater

machine on constructed CC work for finishing the surface as

per requirement. The rate including all machinaries, labor,

loading, unloading, transportaion etc complete as per

direction given by engineer incharge.

Carrying out timber treatment to all wood work including

drilling holes and spraying oil based chemical solution on

surface of timber work for termite control including labor and

material etc. complete. Using Chlorpyriphos20 EC as per

6313 2013 Part III (1% concentration by mass) is recommended

one litre chemical emulsion diluted with 19 liters of

108 1 kerosene. Total diluted concentration will be 20 liters 54.98 Smt

inclusive of 1 liter chemical emulsion application in drilled

holes and 0.75 / Litre chemical per one Sqmt two coat on wood

surface not protected by paint or

Applying general insecticide pest control treatment to floors,

cupboards etc including labour materials etc. complete. Using

Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075%

109 1 concentration by mass) is recommended 10.5ml chemical diluted 88.40 Smt

with 5 liters of water application 0.5 litre chemical /Sqm of surface

is recommended as per I.S.

Carring out plinth treatment to post construction /

existing structure by spraying chemical solution for termite

control treatment including labour and material consist

I.S. specification. Using Chlordene and Chior purfiles

110 1 EC. As Per 6131_paret-II Consentration Weight on 104.90 Smt

percentis recommended i.e one litre 20 EC chemical

emulsion with 19 liter give 1% concrentration inclusive of one

litre chemical emulsion appication attherate of 5 Litre

chemical / Sqm of surface is recommended as per I.S

Carrying out wall treatment for termite control including spraying

with chemical solution in oil base including labour and

material Using Chlorpyriphos 20 ECAs per IS 6313 part

- II (1% concentration by mass) is recommended i.e one

litre chemical emulsion diluted with 19 liter oil base. Total

111 1 solution will be 20 liters inclusive of one liter chemical 37.34 Smt

emulsion application at the rate of 7.5 litre chemical / Sqm of

surface is recommended as per

Providing erecting and fixing double coated Syntex 3.91 Litre

or equivalent PVC.(ISI) water tank of required capacity

112 1 each with all necessary fittings and connection etc.

Providing and fixing to wall, ceiling and floor galvanised Mild

steel tubes (Medium grade) of the following nominal bore,

113 0 tube fitting and clamps including making good the wall ceiling and

Providing and laying in trenches galvanised mild steel

tubes (Midium grade) of the following nominal bore, and

tube fitting (Earth work in trenches to be measured

paid for separately)

Making connection of galvanised Mild steel distribution branch 600.08 Each

with galvanised mild steel main 50 mm to 80 mm nominal

115 1 bore by providing and fixing tee including cutting and

threading the pipes complete.

Providing and fixing to wall ceiling and floor 6.0 Kg.F/Cm2

working pressure poluthene pipes of the following out side

Dia. Low densidy, complete with special falnge

116 0 compression type fittings,wall clips etc.including

good the wall ceiling and floor.

Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2

working pressure polythene pipes of the following out side

117 0 Dia. Low densidy, complete with special falnge

compression type fittings, wall clips etc. including making

good the wall ceiling and floor.

Providing and fixing cast iron (Spun) Nahni trap of the

following nominal diameter of self cleaning design with

C.I. screaed down or higned grating including cost of

118 1 cutting and making good the walls and floor 100 mm inlet 600.08 Each

outlet.(C)100mm dia.

Providing and fixing water closet squatting Pan (Indian

type W.C.Pan) size 580 mm (Earth work, bed concrete,

119 1 foot rest and trap to be measured and paid for separately) 926.10 Each

(A) Vitreous China. (I)Long pattern = White colour

Provdg. & fixing wall mounted White / Color Vitreous

China European water closet with integral P trap

120 1 of "Cera" - Clair Series or equivalent incl. seat cover , Chair 4250.00 No.

Bracket etc. complete as per direction of engg. In charge.(N.S.)

Provdg. & Fixing Flat Back Large Urinal of White/ colour of 1850.00 No.

"Cera" or " Hindware" incl. C.P. Brass waste coupline , waste

121 1 pipe, pvcconnection etc. Complete.( size 635 x395x420

Providing & Fixing Angle cock of " Ess Ess" - Trend series

122 1 or equivalent standard make as approved by engg. in 675.00 No.

charge all complete. (N.S.)

Providing and fixing 100 mm size P or S trap for water 311.85 Each

closet squatting pan including jointing the trap with the pan and

123 1 soil pipe in cement Mortar1:1 (1-Cement : 1-Fine

Vitreous China.

Providing and fixing 600 mm x 450 mm bevelled edge 825.48 Each

mirrror of superior glass mounted on 6 mm thick A.C. sheet

124 1 or ply wood sheet and fixing to wooden pluge with C.P. brass

screws and washers.

Providing and fixing chromium plated brass halftrun flush cock of

125 0 approved quality including fixing in pipe line etc. complete.

Provdg. & fixing White / Color Vitreous china Counter wash

basin with signle hole for pillar tap of "Cera " -

Concord series of 550 x425 mm size to be fiited in stone counter

with necessary brackets painted white incl. cutting holes

126 1 and making good the same .Cost Includes P/F C.P. 2950.00 No.

brass waste coupline, 32 mm dia fisher union ,15 mm dia. Pillar

cock & Angle cock of " Ess Ess"- Trend series ,32 mm

dia. Waste pipe etc. complete as per dir. of engg. in

Providing & Fixing S.S.304 Grade Sink of Nirali /

127 1 Krishna or Equivalent Make for Kitchen Platform of 4650.00 No.

size : 24":x18" as per Direction of engg. In charge

Providing and fixing C.P. brass towel rail comlete with

128 3 C.P.brass brackets fixed to wooden plugs with C.P. brass Each

scews.(B) 600mm x 20mm size.

Providing and fixing 600 mmx120 mm glass shelf with C.P.

129 2 brass bracket and guard rail complete mixed to wooden plug Each

with C.P.brass screws.

130 2 Providing and fixing toilet paper holder. (A) C.P.Brass 414.53 Each

Providing and fixing screw down bib taps of following size. (A)

131 0 Brass screw down bib tap polished bright.

4 (i) 15mm dia. 184.98 Each

3 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps of following size. (B)

132 0 Brass chromium plated screws down Bib Tap.

5 (i) 15mm dia. 184.98 Each

3 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps of following size. ©

133 0 Gun metal screw down bib tap.

8 (i) 15mm dia. 157.29 Each

5 (ii) 20mm dia. 176.09 Each

Providing and fixing pillar tap, capstan head, screw down

134 0 high pressure with screws, shanks and back nuts.

6 (i) 15mm dia. 305.67 Each

5 (ii) 20mm dia. 351.18 Each

Providing and fixing Gun metal check or non-return fullway

135 0 wheel valve.

3 (i) 15mm dia. 184.98 Each

3 (ii) 20mm dia. 201.80 Each

5 (III) 25 MM DIA 416.47 Each

4 (E) 40mm dia 656.86 Each

Providing and fixing chromium plated brass half trun

140 0 flush cock of approved quality including fixing in pipe line etc.

5 (i) 20mm dia. 252.26 Each

3 (ii) 25mm dia. 261.16 Each

3 (iii) 32mm dia. 273.03 Each

Providing and fixing chromium plated, bottle trap with

141 5 necessary couplings of approved quality for wash basin. Each

Providing and fixing ball cock ofapproved quality as directed. 131.57 Each

142 6 (A) Copper Metal (i) 25mm dia.

Providing and fixing ball cock of approved quality as 101.89 Each

143 8 directed. (B)Abonite (i) 25mm dia.

Filling with good Quality thor as and where directed by

the Architect / Engineer-in-charge, in sunk in layers of 15 cm.

144 3 thickness, including watering, ramming well etc. complete, as 3850.00 Cmt

directed by the Architect / Engineer-in-charge .

Providing laying and jointing in true line and level 15 mm

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the

145 11 wall with the help of clamp at every two metre C/C or shall 71.93 Rmt

be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

solvent, including cost of all materials.adhesive

Providing laying and jointing in true line and level 25 mm

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX orequivalent as

approved by Engineer In Charge. Pipe shall be fixed on

146 5 the wall with the help of clamp at every two metre C/C or 90.93 Rmt

shall be concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 32 mm

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the

147 5 wall with the help of clamp at every two metre C/C or shall 117.97 Rmt

be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40 mm

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the

148 3 wall with the help of clamp at every two metre C/C or shall 146.65 Rmt

be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 50 mm

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the

151 3 wall with the help of clamp at every two metre C/C or shall 193.73 Rmt

be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing in line level plumb, fabricating and fixing

three row horizontal barbed wire fencing and punched tape

concertina coil of 9 turns per meter of 610 mm dia fixed with

clips on top of the angle iron posts. The punched tape

concertina coil having sharp barbs at every 25 mm

spacing shall be 0.5 mm thick and 19 mm width and weighting

kg/100 mt. (Average) as per manufacture's specification. The

rate shall also include providing and fixing

mt.total long MS angle 40 x 40 x 6 mm @3.00 mt.c/c spacing

embaded in RCC column, angle posts shall be painted with one

coats of red oxide and two coats of enamel paint of approved

quality at top compound wall.

Fixing sun film for protection sunlight in black or any colour as as 850.00 Smt

153 3 directd by engineer In Charge.(Market rate)

Providing & Fixing 3 mm thick F.R.P.sheet of

Approved Quality & Color / Pattern as per Consultant's

design also includes required fabrication structure in the

grid of 2'-0x2'-0 size using hollow pipe of16 gauge & size

154 47 2"x1" & 1"x1" ,G.I. & Bitumen Washers, Silicon paste 1930.00 SqM

application for fixing the sheet . Rate also

includesnecessary bending, cutting, labor charges , Zinc

Primer coat & Two coats of oil painting of color as approved by

consultants & making good the wall. (N.S.)

Providing 2 mm thick F.R.P. Gutter with necessary M.S. 400.00 Rmt

155 2 Supporting Brackets. (N.S.)

Hiring charges for J.C.B.machine inclduing cost of fuel,

156 2 operator, dirver etc.. ( 12 hours sift day/night) (N.S.) 600.00 Hrs.

To provide tractor with hydraulic trolley, driver, 4 Nos. of Labor

with all tools like bucket drum, showels, trikam, pavadas,

etc,, to carryout different works during monsoon for 12 Hrs.

157 2 Shift. Work shall be carried out as per the instrucitons of 1661.02 No.

Engineer In-Charge.No extra charged shall be paid for night

Roller Blind Providing and fixing Roller Blind curtain fixed

on window level on wooden batten and curtain lift with

cotton thin rope, make of aerolax or equivalent design

158 2 and colour as per instruction by engineer – in – Charge with 3285.00 Smt

necessary hardware fitting, material and labour etc

Providing & Fixing Door closer - Door closers (Heavy type of 765 474.58 No.

159 2 number) Hardwire or Everite Prabhat or Equivalent

Providing and fixiing M.S. Fan clamps type 1 of 16 mm dia M.S. 124.74 No.

bar bent to shape with hooked ends of R.C.C. slabs during laying

160 2 incl. painting the exposed protion of loops, all as per

design complete.

Providing cement vata (10cm. x 10 cm. size) quarter round

161 5 in cement mortar 1:1 including neat cement finishing, watering etc. Rmt

162 3 Making Water connection from exi.Muni. Water line (N.S.) 250.00 No.

Providing and applying fibere reinforced cementitious

micro concrete work in cellings and beams

incl.mixture of CEMSCREED HM (F) fair mate

company material, FBR bonding agent material with

163 16 water in suItable proportion anti corrosive treatment 530.00 Smt

on exposed beam,celling steel bars with safeCore R incl.all

kind of labour etc.comp.including three coat of

white wash.(Approved Rate)

Providing and Fixing 1 H.P. Electrical monoblock or submarcible 6800.00 Set

164 2 water pumps withmotor and required cable and switch board

of approved brand and make etc.comp.as directed.

ProvidingTMTBarFE500/500Dreinforcement for

R.C.C.workincluding bending,binding and placing in position

165 16 complete upto floor two level placing in position complete 75.46 Kg.

upto floor two level placing in position complete upto floor two

Providing and fixing 30mm thick solid both side prelam PVC door

166 5 shutter (sintex door-equivalent) with necessary alluminium fitting 2867.00 Smt

with EL-7 section frame

Conveyance charge of Earth,Lime, Murrum, building rubbish 235.51 Cu.M.

167 8 earch manure or sludge and excavated rock and fly

ash,aggregate of any kind etc.comp.upto 5 km lead.(L.S.)

Providing and laying polished granite stone slab 18 mm thick in

risers of steps, dedo and pllars laid on 10 mm thick cement

168 3 mortar 1:3 (1 cement:3 coarse sand) and jointed with gray cement 2690.00 Smt

slurry including rubbing & polishing etc.complete.

Wall panelling with 12 mm MDF fixed to existing 1688.00 Smt

alluminium framing and making grove as per design and

finished with royal plastic paint as per instruction of

engineer incharge.

Providing and laying 15mm bamboza wooden flooring

as per architect's drawing with all necessary details as

170 5 directed by the project consultants. Use underlay for 2690.00 Smt

better result as per Detail specifications and directed by the

project consultants. (N.S.) (Approved Rate )

Applying two coats of Birla (whitecementbased) or

Asian (acryliclapy-putty) or equivalent & two coats of primer of

171 3 approved brand and manufacture on new wall surface to give 40.19 Sq.M.

an even shade including thoroughly brushing the surface free

from mortar dropping

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape evenshade after

172 16 thoroughly brushing the surface to remove all dirt, and remains of 113.40 Sq.M.

loose powdered materials.etc complete

Providing and fixing flush door shutters, solid core

construction with frame of first class hardwood with cross

board and face veneer or plywood face panels, with

both side 1 mm laminate finishing including

anodized aluminum butt hinges with necessary screws.

Decorative type and pine wood core anodized minimum 3 no

150 mm long aluminum butt hinges in flush door shutters with

2 no of brass holdfast 325 mm long 1 no brass tower bolt

173 2 mm long and two no of 150 mm long brass door handle 4686.36 Smt

. Decorative both side laminated Flush door 35 mm thick. with

frame of 10 cm x 7 cmt Indian teak wood frame including all

necessary fitting fixtures hardware screw and

adhesive etc fixing up to all lead and lift height up to 45 mtr

from GL etc complete as per direction of engineer in charge

P/M/F chainlink jali 8'x4' size as per details sketch & instructionof

engineer in charge same as lal darwaja garden pattern consisting

of 3'dia. M.S black pipe 'A' class 5'4" ht. fixed at 8'9" c/c in C.C

1:2:4 block of 9"x9"x9" size chain link jali of size 2"x2"x10 gauge

fixed in 35x35x5 mm MS angle frame 8'x4' size with MS flat

174 2 of size 25x3 mm welded jali etc.comp.The jali is to be welded to 1230.00 Rmt

MS pipe with MS flat as instruction given.The M.S pipe and the

M.S angle frame are to be painted one coat of primer and two

coats of paint as directed in line and level. (N.S)

Supplying and fixing of 300 mm-L x 15 mm-B x 380 mm-

H Kerb block for Footpath in M-20 grade using 20 mm

nominal size black trap aggregate of

Sevaliya/Timbaor equivalent quality for pre-cast

blocks, reasonablyexposed finish/ formwork , mould

well equippedwith vibratory system for kerb stones of

approved design including curing, etc. complete, including

thecost of formwork etc. complete. The rate shall

also include necessary cutting of asphalt, fixing

175 3 the Kerbstones in line and level on 5 cm thick sand bedding 393.00 Rmt

withnecessary equipments and materials. The rate shall

also include the flush pointing in CM (1:3) for all joints of the

kerb stones. Filling of zari alone the sides of the kerbstone fixed

with Bituminous concrete Bituminousconcrete /

C.C. mixed in proper position to flush withthe road surface

as directed by Engineer in change to form a

portable mixture.a) Laying on 5 cm thick Sand Bedding

Providing and Laying of Rubber Moulded Paver Block

Grey/Coloured 60 mm thick, M-35 Grade of any size shape

(Usually Uni-Paver Blocks) using black trap good quality

aggragate of 20 mm nominal size for footpath,parking areas,

service lanes and other areas as mentioned in the drawing /

instruction of engineer in charge. Cost includes formworks using

rubber mould, Rate providing and laying paver blocks as per

required grading and specification. The paver block shall be

mechanically compacted. The work of paving blocks shall be

176 13 executed in line and level by skill mason of flooring work only. It 429.00 Smt

should be laid in such a way that the no cutting of the paver block

to be necessary. if cutting of paver block necessary then it should

be cut by machine only and carting. The finished surface of the

paver block shall have resonably good, plain finished. Paver

blocks shall be compacted and shall be relaid if necessary.

Gravel or such type of materials shall not be allowed

for production. Laying on 5 cms thick sand

Provoding and fixing flush door shutters, solid core construction

with frame of first class hard wood with cross board and

face veneer or ply wood face panels, including anodised

alluminium butt hinges with necessary screws. (B) Non-

177 9 decorative type and block board core anodised alluminium butt 1779.97 Smt

hinges in flush door shutters (2) 35 mm thick. Labour work for

fixing any kind of paving with cement pointing in CM 1:2, including

watering, ramming etc comp. as dir.For pavement

Box type metal letters forming composite box made from

1mm thick stainless steel plate of grade 304 having brush

finish of following font size to be fixed at Main Gate in

178 0 english and or Gujrati and including fixing charges approved

before fixing by

clent / consultant.

178.a 2 400mm high 1000.00 Nos.

178.b 2 300 mm high 750.00 Nos.

178.c 2 230 mm high 565.00 Nos.

Providing and fixing false ceiling at all height including providing

and fixing of frame work made of special sections, power pressed

from M.S. sheets and galvanized with zinc coating of

gms/sqm (both side inclusive) as per IS : 277 and consisting of

angle cleats of size 25 mm wide x 1.6 mm thick with flanges of

mm and 37mm, at 1200 mm centre to centre, one flange fixed to

the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm

dia bolts, other flange of cleat fixed to the angle hangers of

25x10x0.50 mm of required length with nuts & bolts of required

size and other end of angle hanger fixed with intermediate

G.I. channels 45x15x0.9 mm running at the spacing of

mm centre to centre, to which the ceiling section 0.5 mm thick

bottom wedge of 80 mm with tapered flanges of 26 mm each

having lips of 10.5 mm, at 450 mm centre to centre, shall be

fixed in a direction perpendicular to G.I. intermediate

channel with connecting clips made out of 2.64 mm dia x

230 mm long G.I. wire at every junction, including fixing

perimeter channels 0.5 mm thick 27 mm high having flanges of

mm and 30 mm long, the perimeter of ceiling fixed to

179 100 wall/partition with the help of rawl plugs at 450 mm centre, with 850.00 Smt

25mm long dry wall screws @ 230 mm interval, including fixing

of gypsum board to ceiling section and perimeter channel with

the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c,

including jointing and finishing to a flush finish of tapered and

square edges of the board with recomme-nded jointing

compound , jointing tapes , finishing with jointing compound in

3 layers covering upto 150 mm on both sides of joint and two

coats of primer suitable for board, all as per

manufacturer’s specification and also including the cost of making

openings for light fittings, grills, diffusers, cutouts made with frame

of perimeter channels suitably fixed, all complete as per drawings,

Providing & Fixing SPEED BUMP - #2 No (1 black, 1 yellow)

x 500 x 50 mm, Size per color End Cape 350 MM x 175 MM x

MM TOP DESIGN - Lining Top flat ANTI SKID PATTERN FOR

GRIP COLOUR :- YELLOW & BLACK BODY MATERIAL :-

MODIFIED THERMOPLASTICS (Polymer Rubberized ) • ECO

180 0 FRIENDLY RECYCLE RUBBER Packing :- 4 pcs/ woven 2185.00 Rmt.

Bag Load Capacity :- 20 MT Fitting ( Fixing on TRAKE) :-4

holes & END CAPE :- 2 HOLE HEX Bolts with Washer

Epoxy for Bolt Fitting etc. complete as directed by EIC .

Providing and fixing PVC/Gpsysum plain colour false ceiling

with grid type with aluminium frame from gypsteel, fastners

,props, Finishing as per architectural drawing allowing

181 2 openings for A.C. Diffusers, Light/Electrical Points etc – 933.00 Smt

complete, Prior to fixing on frame.(Brand : Anutone or

equivalent ) (N.S.) or as directd by engineer In Charge.

Provdg. & laying S.W. Gully trap with brick masonry chamber &

182 2 water tight G.T.Stone including fixing of covervSquare mouth trap 1263.15 No.

100 mm x100 mm size P-Trap

Providing cement vata (10cmx10cmsize) quarter roundin cement

183 2 mortar 1:1 including neat cement finishing, waterin getc. complete. Rmt.

Providing and laying (to level or slopes) and jointing with 211.05 Rmt.

stiff mixture of Cement Mortar in proportion 1:1 Salt glazed

stoneware pipes including testing of pipes and joints

complete.(A) 100mm

Providing and laying (to level or slopes) and jointing with 288.23 Rmt.

stiff mixture of Cement Mortar in proportion 1:1 Salt glazed

stoneware pipes including testing of pipes and joints

complete.(B) 150mm

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.)

and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix

(1-cement :2- coarse sand :4-graded stone aggregate 20mm

size) foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm deep for single pipe

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.)

and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement on

walls and bed concrete etc. complete.(i)Inside dimensions 500mm

x 700 mm and 450mm deep for pipe line with one or two inlets.

Providing, supplying and fixing precast C.C. blocks (M-20) edge

kerb having size of 75 x 300 x 300 mm depth and as per design

188 1 conveying it to the site, jointing into C:M 1:3 and racking out the 219.00 Rmt.

joints incl. necessary excavation of asphalt, soil etc..completed.

Constructing a cooking Sandwich platform 60 cm. width and

cm high resting on B.B.Masonry walls 23 cm.thick in C.M.(1:6)

with (ii) Fixing black Granitee 30mm thick laid on precast R.C.C.

(1:2:4) slab with plastering on exposed faces of wall in C.M. (1:4)

Providing and fixing hard drawn steel wire fabric 75mm x 25mm 754.65 Smt

190 2 mesh or weight not less than 7.75 kg. per Sq.M. to window frames

etc. including60 x 20mm beading of teak wood.

Providing & fixing 15 cm wide chicken mesh jali with nails & then

191 3 application of 15 mm plaster on R.C.C.& masonary joints as per 35.00 Rmt.

dir.of engg.in charge

Providing and laying cement concrete flooring 1:2:4 (1- 348.08 Smt.

cement : 2-coarse sand : 4-graded stone aggregate 20mm

192 2 nominal size) laid in one layer and finished with a floating coat

of neat cement. (A) 50mm thick.

Providing and constructing, Underground (U/G) water tank of

specified capacity, on specified location, for all depths, in

controlled CC of M-200 grade with bottom slab, top slab and RCC

walls, including cost of form work and

reinforcement,with inside and outside plaster in CM 1 :3 and

193 1 water proofing treatment as per IWP specification,including 6.50 Litre

injection, grouting, etc. complete. The rate includes for

providing and fixing two nos. 0.6m. x 0.6 m. size medium duty CI

manhole cover/s at top, including wash out pipe line and

inlet and outlet connections etc. complete.

Providing and fixing PVC Printed pain colour false ceiling with

grid type with alluminium frame consisting of 600mm x

600mm 3mm thick plain PVC sheet used as panel insert in a

frame work made using anodized alluminium T section of size 1 x

1 (235 x 25mm, 19 gauge or 1 mm thick) in square pattern of

grid sizes of 2 x 2 (600 x 600mm) The alluminium frame

194 2 work is supported from the cceiling with the help of G.I. hook 300.12 Smt

and G.I. wire/6mm M.S. rods of required sizes to maintain

proper level etc. The aluminium frame work is supported on side

wall with the use of alluminium L section of size 1 x1 (25 x

25mm) angles etc. complete as per direction of Engineer in

charge. Manufactures specification and drawing.

Providing and supplying of labour for necessary manual 551.00 No

excavation, cleaning, Shifting of Material Or any other, or for any

195 2 other work as directed by Engineer In charge. The Rate

includes Handcart with Mazdoor

A 2 Mukadam/supervisior/karigar 425.00 No

B 2 Fitter/Plumber/Mason 697.00 No

C 2 WELDER/ Gas cutter at Day /night 689.00 No

Supplting of welding machine / gas cutter including cost of

D 2 welding rods/gas, Transportation, including carting from site 1500.00 No

E 3 Mazdoor at Day Female 450.00 No's

E 3 Mazdoor at Day Male 493.00 No's

Supplying electric breaker machine for RCC slab or asphalt

demolishing work on site by using operator, fuel, power

supply etc.complete as directed. (no payment should be

197 2 allowed for non working condition of machinery and for pipe line 1071.42 Shift

excavation and M.H. work. Allowed only for break down work)

(Based on Previously approved rate by CE sir )

Providing and fixing concealed center point to wall ceiling & floor

CPVC (SDR 13.5) PIPE having National Sanitation Foundation

198 0 (NSF) seal for potable water of following dia.

Nominal bore tube fittings and clamps including making good

the wall, ceiling and floor etc. complete.

A 5 15 MM DIA 165.21 Rmt

B 3 20 MM DIA 202.97 Rmt

C 3 25 MM DIA 247.25 Rmt

D 5 32 MM DIA 330.36 Rmt

E 3 40 MM DIA 437.66 Rmt

F 3 50 MM DIA 647.30 Rmt

Supplying and fixing C.I. cover 300mm x 300mm without

199 2 frame for Gulley trap (Standard pattern) te weight of cover to 491.80 Each

be not less 4.53 Kg.)

Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2

working pressure polythene pipes of the following out side

200 0 Dia. Low densidy, complete with special falnge

compression type fittings, wall clips etc. including

making good the wall ceiling and floor.

0 Furniture Item

Proviging and Fixing Storage Shutter made out of 50mm X 25 mm Indian

Teakwood Frame and 18 mm Ply Board. With 1 mm thick laminate

finish in the front and 0.8 mm thick Laminate on Back Side with 12 mm

thick Indian teakwood beading. The scope also include providing and

201 3 fixing s.s. finish hardware as per the Requirement. The rate include 6805.00 Sq.mt.

cost of all labour, material and with all hardware like handle, magnate,

tackels, adhesive, screws, etc.for satisfactory completion of this

items.All Exposed Wood Work shall have

malamine polish etc. complete.

Providing & Fixing Sun Control Reflective Type Film / Frosted Film as

202 3 Selected by Architect/ Engg. In Charge For Glass Doors / 646.37 Sq.mt.

Windows etc. as Directed.

Providing & Fixing in Position Vertical Roller Blinds with Minimum

% and Maximum 5 % Light Transperace Screen Fabric Incuding

Providing & Fixing of Powder coated G- Channel at the Topof

Window with necessary Screw , Cleats etc. and PVC Roller ( Weight

Pipe) and PVC Chain For Up and Down Movement of Blinds etc. of

203 3 Approved Make and as per Drawings / Instruction of Engg. in Charge For 1372.03 Sq.mt.

All Colors and Shades. Rates Includes all Lead and Lift For All Floor Level,

All Height , All Material , Accessories, Fixing , Scaffolding , Labor etc.

Complete in All Respects. All Required Accessories & Material must be

From Same Manufacturer.

Providing valleys 900mm overall in plain 1.6mm thick G.I. sheet fixed 1042.78 Sqm

with G.I. J or L Hooks, Bolts and nuts glavanised iron J or L Hooks Bolts

204 3 and nuts 8mm dia G.I. Limpet and bitumen washers

Structural steel work ( Confirming to IS 4923-1997) riveted, bolted or

welded in builtup for all type sections, in framed work, including

cutting, hoisting, fixing in position and applying a priming coat of

205 60 approved steel primer all complete as per the structural designs and 126.68 Kg

directions of Engineer in charge.Column ( 122 x 61 x 3.6mm )

Providing and applying approved coloured chips 20mm thick

STONE CREAT PLASTER for exterior / interior side on wall up to full

height from ground level consisting of 12mm thick backing coat of CM 1:3

(1 cement : 3 Bodeli sand) and 8mm thick finishing coat of CM 1:1 (1

cement (Grey / White / Colour : 1 stone grit (approved coloured chips))

206 2 including providing & fixing 300mm wide strip of chicken net at vertical 709.60 Sqmt

and horizontal joints of RCC and masonary including 10mm alluminium

channel for expantion joint / grooves, curing, necessary scaffolding in

true line and level etc. complete as

directed by EIC.

Providing and laying 18 mm thick polished granite stone machine cut

in single piece (Max. available) in sill and jambs of door

,window,ventilation & lift wall cladding,staircase flooring landing, risers

& treads, skirting laid over 10 mm thick cement mortar 1 : 3 (1 cement :

207 0 coarse sand) and jointed with grey cement slurry with matching 3279.00 Sqmt

pigment incl. rubbing and polishing,half rounding edge and incl. fixing

of hilty fastener at every 1/3 span of sill as required size etc. complete

colour and shed as approved by architect

engineer in charge.

Filling in foundation and plinth with brick Bats Chhara in layers of

208 0 20cm. thickness including watering, remming and consolidating 594.61 Cmt

Providing and laying cement concrete 1:3:6 (1- Cement : 3-

Coarse sand : 6- crushed stone aggregates 20 mm nominal size)

complete including cost of formwork in (A) Wall Caps / Coping

Supply and Installation of High Density Rubber Flooring having

thickness of 8.0mm made of 85% black rubber granules and 15%

synthetic EPDM granules. Rich colors, Environmental friendly,

non-toxic, Recycled, non-pollution, Moderate and adjusted

210 5 hardness, Excellent resilience, wear well, Soft, anti-slip, anti- 3917.79 Smt.

fatigue, Density (kg/m3):1000-1200, Hardness (Shore a):68,

Stretch (MPA):2.2, Length (m):10m ±5cm, Width (m):1.0m

±5mm, Thickness: 8mm +0.3mm etc. complete as directed by

Engineer-In-Charge.

Providing and laying ordinary cement concrete 1:2:4 (1- Cement

2- coarse sand : 4- graded stone aggregates 20 mm nominal size)

and finishing smooth with,curing etc. complete including the cost

of formwork but excluding the cost of reinforcement for R.C.C

work in (A) BEAMS :(i) Having cross-sectional area 0.05 to

Providing and fixing complete sliding shutter solid PVC window

25mm thick factory made glazed solid PVC window shutter

consisting of frame made out of M.S. tube of 19 gauge of size

x 15mm for styles top, bottom rail. M.S. frame shall have a coat

of steel primer of approved make and manufacture, M.S. frame

shall be covered with 4mm thick heat mouled PVC ‘C’ channel of

size 58mm x 25mm x 38-mm out of which 8mm shall be bent at

90 degree towards inner side on front face of the window shutter

forming stiles. For top rail and bottom rails, M>S. frame shall be

covered with 4mm thick, 58mm wide PVC sheet out of which

8mm shall be bent at 90 degree towards inner side on front face

and 38mm wide PVC sheet shall cover the M.S. frame at top and

212 1 bottom rail on back side of window shutter, 4mm thick 15mm 2576.85 Sq.mt.

wide cross PVC sheet as gap insert for top and bottom rail. PVC

sheet beading of 8mm thick (4mm x 2) to be stuck internally with

solvent cement adhesive in top and bottom rails. Glass panel will

be fitted externally in the clear space available between stiles &

rails and fixed

between PVC sheet of stiles and rails bent at 90 degree on front

face 12mm x 123mm ‘L’ shape outer PVC beading nailed on

stiles and rails at theback side so that ‘L’ shape outer PVC

beading can be removed when required for replacement of broken

glass etc. complete as per direction of etc. complete as per

direction of Engineer in charge and

manufactuture’s specification.

Providing and fixing PVC Printed pain colour false ceiling with

grid type with alluminium frame consisting of 600mm x 600mm

3mm thick plain PVC sheet used as panel insert in a frame work

made using anodized alluminium T section of size 1 x 1 (235 x

25mm, 19 gauge or 1 mm thick) in square pattern of grid sizes of

2 x 2 (600 x 600mm) The alluminium frame work is supported

213 2 from the cceiling with the help of G.I. hook and G.I. wire/6mm 766.00 Sq.mt.

M.S. rods of required sizes to maintain proper level etc. The

aluminium frame work is

supported on side wall with the use of alluminium L section of

size 1 x 1 (25 x 25mm) angles etc. complete as per direction of

Engineer in charge. Manufactures specification and drawing.

Providing and fixing sheet glass, selected quality (Type-C)

bedded in putty and fixed with wooden beading including the cost

214 0 of wooden beadings of first class teakwood and necessary cutting 1143.05 Sq.mt.

(1) 5 mm thick.

Providing 20 mm thick double coat mala cement plaster on

interior brick / concrete work for plastering comprising of base

coat of 12 mm thick cement plaster in cement mortar (1 Cement :

215 1 4 coarse sand) in rough finishing and 8 mm thick top coat of 269.78 Sq.mt.

cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with

trovel including scaffolding curing etc. complete.

Pointing on brickwork with cement mortar 1:3 (1- cement : 3-

216 1 coarse sand) (A) Flush pointing 91.20 Sq.mt.

Cutting out cracks of roof terrace to V- section , cleaning out,

217 3 wetting , grouting with cement and sand slurry 1:3 (1-cement 3- 64.58 Rmt

PET acoustic sheets are high-density, porous sound-absorbing

panels made from polyethylene terephthalate (polyester) fibers.

They feature an NRC rating of 0.75 to 0.95, a density of 180–240

kg/m³, and standard dimensions of 2400 mm × 1200 mm.

R-Value: Approximately 3.0 to 3.3 per inch of thickness.Density

Range: Varies from 30 kg/m³ (lightweight batts/rolls) up to 150+

kg/m³ (high-density industrial boards and slabs).

Acoustic and Water PropertiesSound Absorption: High open-

porosity matrix yields exceptional noise reduction coefficients

218 3 (NRC 0.85 to 1.05 depending on thickness/density). 3500.00 Sq.mt.

Fire and Thermal SafetyFire

Classification: Non-combustible, Euroclass A1 rating (highest

Gypsum perforated

Perforation and Acoustic

PerformanceHole/Slit Types: Circular (6 mm to 20 mm), square

(10x10 mm), petal, or linear slotsPerforation Rate: Open area

ranging from 9.5% to 23% of the board surfaceAcoustic Backing:

Sound-absorbing non-woven acoustic fleece or tissue on the rear

sideNRC Rating: 0.55–0.65 standard; increases up to 0.75–0.85

when paired with mineral/glass wool infill mats

Providing and fixing Anutone / usg / saint govind wall acoustical

paneling using Stretch NRC Fabric fixing with FS 25 Griper

system,Strand 2400 x 600 x 20mm,Tracks ( Perimeter Track

Half wrap, mid seam whatever is required) fixed directly by

staping to the SB25/SB50 which is screw fixed directly to the

wall along the perimeters with backing of Anutone make NSS

SoundSmooth MB Primer 2400 X 600 X 15 mm thick Panels

219 2 with fixed horizontal/Vertical to the wall at 300mm c/c & 7059.00 Sq.mt.

Anutone make Synth PF 25 x 10 with SoundStick S7adhesive

used as backing material. As per manufactures specification.

High NRC, class A fire rating,Fire Hazard Classification of class

I or A in accordance with ASTM E-84 or UL- 723 testing

parameters,The colour shade of malamine and veneer as approved

by Architect and as specified by manufacturer including all

accessories, material & labour

Providing valleys 900mm overall in plain 1.6mm thick G.I. sheet

fixed with G.I. J or L Hooks, Bolts and nuts glavanised iron J or

220 4 L Hooks Bolts and nuts 8mm dia G.I. Limpet and bitumen 1042.78 Sq.mt.

% ABOVE Or % BELOW (in words also)

CONTRACTOR'S SIGNATURE ADDCE.CITY ENGINEER

& STAMP (North West Zone)