PAINTING TO CERTAIN BLDGS IN CAMOUFLAGE PATTERN INCLUDING REPAIR TO EXTERNAL PLASTER IN TECH AREA AT AF STN PHALODI

Amount

M&L for preparing old painted plastered surface of walls by washing, rubbing down & stopping by vacuum based sanding machine and applying one coat of cement base paint of 1st grade quality, in one or more tints and pattern (camouflage) as approved complete all as specified and directed.

M & L for preparing old painted plastered surface of walls by washing, rubbing down & stopping by vacuum based sanding machine and applying one coat of exterior emulsion paint of 1st grade quality, in one or more tints and pattern (camouflage) as approved complete all as specified and directed.

M&L for preparation of old painted steel or iron surfaces of any description or girth over 10 cm width or girth and applying one coat of synthetic enamel paint in one or more tint and pattern (camouflage) as approved complete all as specified and directed.

S&F in repair 110 mm bore of PVC (SWR) pipes single socketed of pressure rating 4Kg/Cm² ISI marked in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and directed.

S&F in repair 110 mm bore of PVC (SWR) bends ISI marked any radius etc complete all as specified and directed.

Taking down cement lime or cement mortar plastering on lathing (other than wire-netting), without removing lathing, in lime mortar (one side only measured in cases where both sides are plastered) complete all as specified and directed.

M&L for Jodhpur stone of 25mm thick, having smooth surfaces use in any type of work with sharpe edge and fixed with 10mm thick in CM (1:6) complete all as specified and directed.

M&L for rendering 15mm thick on brick masonry / concrete surface in two layers, under layer 10mm thick in CM (1:6) and top layer 5mm thick in CM (1:4) mixed with water proofing compound as per manufacturer's instructions, surface finished even and smooth without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid for saparately.

Supply only water proofing compound copmplete all as specified and directed.

M&L for preparing on newly plastered wall surfaces and finishing walls with Acrylic Smooth exterior paint in one or more tints and pattern (camouflage) as approved of required shade in Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed.

M&L for preparing on newly plastered wall surfaces and applying two coats of cement base paint of 1st grade quality white or tinted in one or more tints and pattern (camouflage) as approved, over a coat of primer complete all as sepcified and directed.

M&L for providing and applying of rust remover after cleaning to remove loose rust/scales /corrosion from reinforcement bars having specific Gravity 1.2-1.22. The material to be applied to the rusted metal using brush allow it to react for 16-24 Hrs & afterwards wire burshing the surface clean with dry cloth before application of protective coating etc complete all as specified and derected.

M&L for providing and applying corrosion resistant non shrink free flow cementitious one component micro concrete with average thickness 50mm using having compressive strength (BS 4551-80-60) MPA at 28 days tensile strength (ASTM C 348)-2.0 N/MM2 @ 28 days Flexural strength (ASTM C 348)-9 EPOXY BONDING AGENT TM Bond FP Thermax having mix density of 1.45 to 1.5 kg/ltr compressive strength (BS-6319 PT 3) -25 Mpa at 7 days, having an over lay time of 3 Hrs at 30°C pouring of micro concrete into the formwork using suitable arrangement or if required using pumping device for and the bottom shutering after 7 days ensuring proper bond between the micro concrete and existing concrete substrata etc & including all tools and tackles as per accepting officer complete all as specified and directed.

M/S SOLANKI GENERAL SUPPLIERS

M/S VISHNOI ENTERPRISES

AMAN ASSOCIATES

KRISHNA CONSTRUCTION COMPANY

Vipul Enterprises