Special repair to Old Type-III Block-6 Qtr. No. 1 to 8 in Dr. R.P. Govt. Medical College at Tanda in Distt. Kangra (H.P.)

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres (Fifty metres) lead as per direction of Engineer - in - charge Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) complete and as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Repairs to plaster of thickness 12mm (Twelve millimetres) to 20 mm (Twemty millimetres) in patches of area 2.5 (Two point five) sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in- Charge with cement mortar 1:4 (1 cement : 4 fine sand) complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm (Twenty millimetres) nominal size) complete complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and laying 600x600 mm (Six hundred into si hundred millimetres) of size Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% (Zero point eight precent) and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% (Zero point zero eight precent) and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm (Six millimetres) thickness, including grouting of joints (Payment for grouting of joints to be made separately) complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron) For doors windows and ventilators and glazed partitions frames complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 250x10 mm (Two hundred fifty into ten millimetres) bright finished brass tower bolts (barrel type) with necessary screws etc. complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 100 mm (One hundred millimetres) bright finished brass handles with screws etc. complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 300x10mm (Three hundred into ten millimetres) ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 125x65x2.12 mm (One hundred twenty five into sixty five into two point twelve millimetres) ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete and as per direction of Engineer-In-Charge including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 12mm (Twelve millimetres) thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge Pre-laminated particle board with decorative lamination on both sides complete and as per direction of Engineer-In-Charge including entire carriage of materials within all leads, lifts and other incidentals.

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm (Four point zero millimetres) thick glass panes complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 4mm (Four millimetres) thick plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) complete and as per direction of Engineer-In-Charge including entire carriage of materials within all leads, lifts and other incidentals.

Providing and laying 15 to 20 mm (fifteen to twenty millimeters) thick granite stone in flooring 20 mm ( Fifteen to Twenty millimeters) (average) thickness base of cement mortar 1:3 (One cement : Three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing, polishing and moulding in single/double layer complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 300mm (Three hundred millimetres) bright finished brass hard drawn hooks and eyes complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc. complete and as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing steel glazed doors, windows and ventilators of standerd rolled steel sections joints mitred and welded with 16x3.15 mm lugs 10 cm. long with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty complete and as per direction of Engineer-In-Charge including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 100mm (One hundred milimetres) bright finished brass door stoper with rubber cushion screws etc to suit shutter thickness cmoplete complete and as per direction of Engineer-In-Charge including entire carriage of materials within all leads, lifts and other incidentals.

welding of steel window shutter when required complete including complete repair of the window shutter including accessorise of window shutter complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten millimetres) gap for thermal expansion, (i) Single socketed pipes complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

100mm (One hundred millimetres) dia pipes

150mm (One hundred fifty millimetres) dia pipes

Single tee with door 110x110x110 mm (One hundred ten into one hundred ten into one hundred ten millimetres)

Single tee without door 110x110x110 mm (One hundred ten into one hundred ten into one hundred ten millimetres)

Bend 110 mm (One hundred ten millimetres) bend

Providing and fixing water closet squatting pan (Indian suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre (Ten litre) low level flushing cistern with fitting and brackets, 40 mm (Forty millimtres) flush bend, 20 mm (Twenty millimetres) over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 100 mm (One hundred millimetres) sand cast Iron grating for gully trap complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing White Vitreous China Wash basin size 630x450 mm (Six hundred thirty into four hundred fifhty millimetres) with a pair of 15 mm (Fifty millimetres) C.P. brass pillar taps wash basin with C.I. brackets, 15 mm (Fifty millimetres) C.P. brass pillar taps, 32 mm (Thirty two millimetres) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 32 mm (Thirty two millimetres) dia Semi rigid pipe P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. (New work) complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

15 mm (Fifteen millimetres) nominal bore

20 mm (Twenty millimetres) nominal bore

Providing and fixing Rectangular shape 453x357 mm (Four hundred fifty three into three hundred fifty seven millimetres) size bevelled edge mirror of superior glass mounted on 6 mm (Six millimetres) thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing CP brass 32mm (Thirty two millimetres) size bottle trap of approved quality & make complete and as per the direction of Engineer-in-charge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing Vitreous china toilet paper holder complete and as per the direction of Engineer-in-charge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm (One hundred two millimetres), height of 75mm (Seventy five millimetres) with concealed fitting arrangements, weighing not less than 106 gms. (One hundred six gms) complete and as per the direction of Engineer-in-charge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 32mm (Thirty two millimetres) to wall ceiling and floor complete and as per the direction of Engineer-in-charge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15 mm (Fifteen millimetres) nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. (Eight hundred ten gms.) complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15 mm (Fifteen millimetres) nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. (Six hundred ten gms.) complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15mm (Fifteen millimetres) nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 30 cm (Thirty centimetres) length 15 mm (Fifteen millimetres) nominal bore uplasticised PVC connection pipe with brass unions complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 10 litre (Ten litre) capacity - white P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing PTMT jet spray of approved quality and colour with one metre tube complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing G.I. pipes complete with G.I. fitting sand clamps including cutting and making good the wall etc. complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

15mm (Fifteen millimetres) nominal bore/diametres

20mm (Twenty millimetres) nominal bore/diametres

Providing and fixing 600x120x5 mm (Six hundred into one hundred twenty into five millimetres) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15 mm (Fifteen millimetres) nominal bore, 107 mm (One hundred seven millimetres) long, weighing not less than 110 gms (One hundred ten gms) PTMT pillar cock of approved quality and colour complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing White Vitreous China Wash basin size 550x400 mm (Five hundred fifty into four hundred millimetres) with a 15 mm (Fifteen millimetres) CP Brass single hole basin mixer wash basin with C.I. brackets, 15 mm (Fifteen millimetres) dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 450 mm ( Four hundred fifty millimetres) long towel rail with total length of 495 mm (Four hundred ninety five millimetres), 78 mm (Seventy eight millimetres) wide and effective height of 88 mm, weighing not less than 170 gms (One hundred seventy gms) PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing Circular type 100 mm (One hundred millimetres) nominal dia PTMT grating of approved quality and colour complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing brass stop cock of approved quality complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

15 mm (Fifteen millimetres) nominal bore

20 mm (Twenty millimetres) nominal bore

parveen kumar

MUKESH CHAND