Material supply for anganavadi construction(Retender)

Amount

stone Aggregate(single size):40mm nominal size

stone Aggregate(single size):20 mm nominal size

Coarse sand(zone |||)

Portland Cement

Hire charges of concrete mixer 0.25 to 0.40 cum with Hopper

vibrator(needle type 40 mm)

stone for masonry work

structural steel such as tees,angles,channels and R.S.joists

Red oxide Zinc chromite Primer

Adjustable telescopic prop 3m (2.02-3.75m)

Beam Clamp 300-380mm(450-1070mm)

wall form panel 1250*500mm

Coner angle 45*45*5mm 1.50m long

100mm channel shoulder 2.5m long

double clip

Single clip

M.S Tube 40mm dia

Adjustable span ESO+SI(2.35-3.40)

Stone Aggregate (single size): 10 mm nominal size

Twisted steel

Solid blocks of size 30*20*20cm

Solid blocks of size 40*20*10cm

Solid blocks of size 30*20*15cm

Anjili wood scantls

Mild Steel round bar above 12mm dia

Flats up to 10 mm in thickness

Fine sand (zone iv)

Vitrified floor tile (60*60)

Ceramic Glazed Tiles 1st quality 300*300 mm in all shades designs except White,lvory,fume red brown

Ceramic Glazed Tiles 1st quality minimum thickness 5mm in all colours shades and designs except burgundy,bottle green

Anjily wood in planks

Bright finished or black enameled mild steel butt hinges 100*58*1.90 mm

Bright finished or black enameled mild steel butt hinges 50*37*1.50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Anjili wood planks

Float glass sheet of nominal thickness 4 mm ( weight not less than 10 kg/sqm)

Factory made door frame size 50*47 mm with wall thickness 5mm made of single piece extruded profile

35 mm thick factory made solid panel pvc door shutter of single piece extruded profile non decorative finished (matt finished

powder coated M S butt hinges 100mm*58mm*1.9mm

Water thinnable cement primer for interior wall surface, having VOC content less than 50gms/litre

Plastic emulsion paint

Synthetic enamal paint in black or choclate shade

Black Japan

Brass mortice latch and lock 100*65mm with 6 levers and a pair of brass lever handles

Oxidised mild steel tower bolt(barrel type)250*10mm

Oxidised mild steel screws 30mm

200mm Aluminium aldrop

Iron hooks & eyes 100mm

Anodised aluminium handles 125mm with plate 175*32mm

Chromium plated brass screws 25mm

Black plastic seat (solid)with lid C.P.brass hinges & rubber buffers

Vitreous China pedestal type wate closet

Flushing Cistrn P.V.C 10 Its capacity (low level)(white)(with fittings, accessories and flush pipe)

Vitreous China flat black wash basin 630*450mm

15mm C.P brass tap

C.P brass waste 32mm

C.I bracket for wash basin and sinks

stainless steel kitchen sink - without drain board 470*420 mm bowl depth 178mm

semi rigid P.V.C waste pipe for sink and wash basin 32mm dia with length not less than 700mm i/c PVC waste fittings

PVC pipe 20mm outer dia 10kgf/cm2

PTMT-towel rail (600mm)

Second class teak wood in scantling

PVC pipe 25mm outer dia 12kgf/cm2

PVC pipe 110mm outer dia 6kgf/cm2

PVC pipe 25mm outer dia 10kgf/cm2

Polyethylene water storage tank with cover and suitable locking arrangements

PVC vent cowl 110mm dia

15mm PTMP bib cock

C.P brass angle valve 15mm

PTMT - soap dish/ holder 138*102*75mm

Mild steel tubes hot finished welded type

welding by electric plant

Mild steel round bar 12mm dia and below

Inter locking C.C paver block (80mm thick, M-30)