Supply, Installation, Testing and Commissioning of HSCF and SM Pump Sets with Mechanical and Electrical Equipment’s and Accessories Etc. Complete at Various Head works under Kalavad Group RWSS in Ta. Kalavad, Dist. Jamnagar.

ABSTRACT OF SCHEDULE-B

Name of Project : SITC of Pumping Machinery under Kalavad Group RWSS

Supply, Installation, Testing & Comissioning of HSCF and SM Pump Sets with Mechanical and Electrical Equipments & Accessories Etc.

Complete at Various Headworks under Kalavad Group RWSS in Ta.- Kalavad, Distt.-Jamnagar.

Head Work: (1) Nikava Hw, (2) Panchdevda Hw, (3) Sanala Sub Hw, (4) Danidhar Hw, (5) Bavakhakhariya Hw & (6) Sursangda Hw

Amount of Total Amount

Amount of Total Amount

Sr. No. Schedule Name of Head Work Disch. X Head - No. of Sets Mechanical Section-A and

Pump Distribution

Section - A Section B Rs.

HSCF 83.33 LPS X 30 Mtr. Head X 37 KW- 2 Set &

1 Schedule- B1 Nikava Hw 3,824,961.10 1,230,309.00

Pump 55.56 LPS X 100 Mtr. Head X 90 KW- 2 Set

HSCF 55.56 LPS X 40 Mtr. Head X 37 KW- 2 Set &

2 Schedule- B2 Panchdevda Hw 2,112,840.00 853,311.00

Pump 253 LPS X 15 Mtr. Head X 55 KW- 2 Set

2900 LPM X 8 Mtr. Head x 12.5 HP- 2 Set

3 Schedule- B3 Sanala Sub Hw SM Pump 799,105.10 306,714.31

440 LPM X 52 Mtr. Head x 15 HP- 2 Set

344 LPM X 50 Mtr. Head x 10 HP- 2 Set &

4 Schedule- B4 Danidhar Hw SM Pump 476,215.40 118,198.60

263 LPM X 30 Mtr. Head x 5 HP- 2 Set

5 Schedule- B5 Bavakhakhariya Hw SM Pump 440 LPM X 52 Mtr. Head x 15 HP- 2 Set 141,566.40 67,362.00

6 Schedule- B6 Sursangda Hw 440 LPM X 30 Mtr. Head x 10 HP- 2 Set 126,993.60 42,529.00

7 Schedule- B7 All Boosting Hw --- --- 1,103,483.40 167,995.00

Total Amount Rs. 8,585,165.00 2,786,418.91

Total Amount Rs. 8,585,165.00 2,786,418.91

Executive Engineer Dy. Executive Engineer

P.H.Mechanical Division Jamnagar P. H. Mechanical Sub Division

Name of Project :- SITC of Pumping Machinery under Kalavad Group RWSS

Name Of Work :- Supply, Installation, Testing & Comissioning of HSCF and SM Pump Sets with Mechanical and Electrical Equipments & Accessories Etc. Complete at

Various Headworks under Kalavad Group RWSS in Ta.- Kalavad, Distt.-Jamnagar.

Head Works :- Nikava Hw

Duty Point :- (1) Nikava CWS to ESR:- 83.33 LPS(300 m3/Hr) X 30 Mtr. Head X 37 KW ( 2 Set) &

(2) Nikava CWS to Danidhar HGLR:- 55.56 LPS(200 m3/Hr) X 100 Mtr. Head X 90 KW ( 2 Set)

Sr. Item Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

(A) MECHANICAL EQUIPMENTS SECTION

Dismantalling of existing 2 No. 75 KW HSCF Pump Set(Nikava to ESR) & 2 No. 110 KW HSCF Pump Set(Nikava to Danidhar

1 1.1 HGLR) at site with its cable, MS Pipe(Suction, Delivery, Common Header Pipe) with Butterfly, DPCV Valve, expansion Bellow etc. 1 Job 46610.00

complete as per instructions of engineer-in-charge.

Dismantalling of Common Suction Pipe at site with hiring of JCB, Hydro, Labor etc. complete as per instructions of engineer-in-

1.2 charge. 1 Job 21720.00

Supply, installation, testing & commissioning of horizontal split casing centrifugal pump motor set of specified duty

parameters & guaranteed efficiency of following MOC with specified capacity, horizontal foot mounted TEFC squirrel cage

induction motor (with minimum IE-3 efficiency class), working on three phase AC supply with 50 Hz ± 3%, 415 V ± 10%,

rated speed 1450 RPM along with fabricated MS base frame, coupling, coupling guard, foundation bolts etc. as per relevant

M.O.C.: Impeller & Wearing Rings: CF8M, Casing: Cast Steel WCB , Shaft: SS 410, Shaft Sleeve: SS 410, Mechanical Seal

(Above 30 kW), Base Frame: MS

(i) For Nikava CWS to ESR:- 83.33 LPS(300 m3/Hr) X 30 Mtr. Head X 37 KW

2.2 (ii) For Nikava CWS to Danidhar HGLR:- 55.56 LPS(200 m3/Hr) X 100 Mtr. Head X 90 KW (VFD Supported Motor) 2 Set 731550.00

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of MS Pipe conforming to IS-3589-2001 or its latest

revision/ammendment including loading, unloading conveyance to site, stacking etc. all complete.

3 3.1 Pipe dia in OD- 219.1 mm, Thickness- 4.5 mm (Delivery Pipe for ESR Section & Suction and Delivery Pipe for Danidhar 18 Mtr 1852.40

Pipe dia in OD- 273 mm, Thickness- 5.0 mm (Suction Pipe for ESR Section & Common Header Pipe for Danidhar HGLR

3.3 Pipe dia in OD- 323.9 mm, Thickness- 4.5 mm (Common Header Pipe for ESR Section) 12 Mtr 2755.50

3.4 Pipe dia in OD- 508 mm, Thickness- 5.0 mm (Common Suction Pipe for ESR & Danidhar HGLR Section) 20 Mtr 4821.30

Sr. Item Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of GI Pipe conforming to IS-1239 or its latest

4 4 revision/ammendment including loading, unloading conveyance to site, stacking etc. all complete. 30 Mtr 950.40

100 mm Dia Medium Duty (Bypass Pipe for ESR & Danidhar HGLR Section)

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of M.S. Special Such as Suction Strainer, Flanges,

5 5 Concentric / Eccentric Nozzles, Reducer / Expanders, Bend, Bolts, Nuts,etc. Complete. as per relevent IS Standard. 600 Kgs. 105.60

For 219.1 mm OD, 273 mm OD, 323.9 mm OD, 508 mm OD & 100 mm dia Pipe

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of ISI mark Both End Flanged Butterfly Valve as per IS

13095 (Latest Edition) with sleeve of EPDM & disc, shaft & internal partsof SS-410, of Board Approved make to be installed on

Suction MS Pipings including cost of all labour, jointing material, including nut bolts as per specification & requirement including all

6 6.1 taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading,conveyance to departmental 1 No. 17945.00

stores/site, stacking etc. complete.

(i) 300 mm Dia (PN 1.0 Rating) for Common Header Pipe- For Nikava CWS to ESR

6.2 (ii) 200 mm Dia (PN 1.0 Rating) for Delivery Pipe- For Nikava CWS to ESR 2 No. 6608.00

6.3 (iii) 250 mm Dia (PN 1.6 Rating) for Common Header Pipe- For Nikava CWS to Danidhar HGLR 1 No. 9866.00

6.4 (iv) 200 mm Dia (PN 1.6 Rating) for Delivery Pipe- For Nikava CWS to Danidhar HGLR 2 No. 6858.00

Supply at site, Storage, Erection, Installation, Testing & commissioning of ISI Mark Both End Flanged Swing Plate Type Dual

Plate Check Valve of Approved make to be installed on DELIVERY MS Pipings including cost of all labour, jointing

7 7.1 material,including nut bolts as per specification & requirement including all taxes, insurance, transportation, freight charges, octroi, 1 No. 36186.00

inspection charges, loading, unloading,conveyance to departmental stores/site, stacking etc. complete.

(i) 300 mm Dia (PN 1.0 Rating) for Common Header Pipe- For Nikava CWS to ESR

7.2 (ii) 200 mm Dia (PN 1.0 Rating) for Delivery Pipe- For Nikava CWS to ESR 2 No. 16671.00

7.3 (iii) 250 mm Dia (PN 1.6 Rating) for Common Header Pipe- For Nikava CWS to Danidhar HGLR 1 No. 28776.00

7.4 (iv) 200 mm Dia (PN 1.6 Rating) for Delivery Pipe- For Nikava CWS to Danidhar HGLR 2 No. 17313.00

Supply, installation, testing & commissioning of flange ends Expansion Bellow as per EJMA standards of overall length of minimum

300 mm, designed for 15 mm axial compression and 5 mm axial extension with tie rods etc. of following MOC & pressure ratings.

8 8.1 MOC: Bellows: SA 240 Gr. 304; Internal Sleeve: SA 240 Gr. 304; Weldends: IS 2062 Gr. B; Flanges: IS 2062 Gr. B (Drilling as per 2 No. 10200.00

IS 1538 / IS 6392 ) & Limit Rods & Nuts: CS - IS

(i) 300 mm Dia (PN 1.0 Rating) for Common Header Pipe & Flowmeter- For Nikava CWS to ESR

8.2 (ii) 200 mm Dia (PN 1.0 Rating) for Delivery Pipe- For Nikava CWS to ESR 2 No. 6216.00

8.3 (iii) 250 mm Dia (PN 1.0 Rating) for Suction Pipe- For Nikava CWS to ESR 2 No. 7745.00

8.4 (iv) 250 mm Dia (PN 1.6 Rating) for Common Header Pipe & flowmeter- For Nikava CWS to Danidhar HGLR 2 No. 8192.00

8.5 (v) 200 mm Dia (PN 1.6 Rating) for Delivery & Suction Pipe- For Nikava CWS to Danidhar HGLR 4 No. 6576.00

Sr. Item Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of Both End Flanged ISI Mark C.I. Non Rising Spindle

Type Sluice Valve with hand wheel operated PD type short body of board approved make to be installed on By-pass piping

including cost of all labour, jointing material,including nut bolts as per specification & requirement including all taxes, insurance,

9 9.1 transportation, freight charges, octroi, inspection charges, loading, unloading,conveyance to departmental stores/site, stacking etc. 2 No. 16866.00

(i) 250 mm Dia (PN 1.0 Rating) for Suction Pipe- For Nikava CWS to ESR

9.2 (ii) 200 mm Dia (PN 1.6 Rating) for Suction Pipe- For Nikava CWS to Danidhar HGLR 2 No. 11037.00

9.3 (iii) 100 mm Dia (PN 1.6 Rating) for By Pass Pipe- For Nikava CWS to ESR & Danidhar HGLR 2 No. 4037.00

Supply, Installation, Testing, Commissioning of Bourdon Type Pressure Gauge, ±1% accuracy, Direct bottom 1/2" NPT (M)

process connection, IP 67, Glycerine filled, SS304 Case with Bayonet Type Bezel, SS316 L Bourdon Tube, SS 316 Movement

10 10.1 material, Aluminium dial with black graduation on white background, Micro Zero adjustable pointer, neoprene gasket, Blow out disc, 3 Nos. 1029.00

shatter proof glass, SS tag plate etc as per IS

(a) 100 mm Dial Size- 0 to 6 or 0 to 4 Kg/cm2- For Nikava CWS to ESR

10.2 (b) 150 mm Dial Size- 0 to 20 Kg/cm2- For Nikava CWS to Danidhar HGLR 3 Nos. 1412.00

Providing & Laying Reinforced Cement Concrete in Thrust Block/Piping/Valves Supports etc. with Tar steel, Black Trap Kapchi as

11 11 Coarse Aggreate for Raft,Grillage Footing with Necessary Centering Form work, Consolidating as per Directive in 1:2:4 Ratio comp. 6 Cu. Mtr. 8566.00

as per site requriement

Supply, installation, testing & commissioning single girder type fully electrically operated EOT crane with electrically operated

hoist, class II duty, geared travelling trolley with seven meter lift complete with long travel rail track (40 mm sq. bar), moving or cross

girder, all three motions electrically operated by suitable rating motor IP 54, control panel & down pendant control block, brake,

12 12.1 safety device, cables form motor to starter panel & other required accessories & tested as per IS Specifications. 1 No. 513450.00

Capacity:- 3 Tonne, Lift 6-10 Mtr, SPAN 0-6 Mtr & Long Travel- 12 m

Additional Long Travel of Single Girder EOT Crane (More than 12 m) for 0m-6m Span

12.2 For Single Girder 3 Tonne EOT Crane 8 Mtr 3000.00

Fabrication & Erection of MS Works:

Providing, fabricating, supplying and fixing Mild Steel (MS) works such as staircase, railing, walkway frames, supporting structures

13 13 etc., fabricated out of IS standard MS sections (angles, channels, flats, pipes etc.) including cutting, welding, grinding, transporting to 600 KG 76.19

site, erection, primer coat and two coats of synthetic enamel paint, complete in all respects as directed.

Supplying & fixing Steel Chequered Plate having 7 mm thickness, duly painted with two coats of black Japan colour. (Average Wt.

Supply, installation, testing & commissioning of horizontal mono submersible pump set (Drain pump) as per IS: 14220 / 1994 & its

latest amendments of following duty parameters with suitable submersible motor as per IS: 9283 / 1994 & its latest amendments

15 15 working on 3 phase, 415 V ± 10%, 50 ± 3% Hz power supply, rated speed 2900 RPM of following duty capacity. Material of 1 No. 15840.00

Constructions: Impeller: High tensile brass / LTB II; Casing: CI FG 260; Pump & Motor shaft: SS 304; Bearing Bush: LTB. Capacity:-

20 m3/hr x 10 mtr Head

Sr. Item Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Supply, testing & commissioning portable Diesel/Petrol driven self priming horizontal mono dewatering pump set with four

16 16 wheel trolley, GI medium duty delivery pipes, specials, suction strainer etc. complete set Material of Constructions: Impeller: Bronze, 2 No. 30864.00

Casing: CI, Shaft: Carbon Steel.

Design, Supply, Installation, Testing, Commissioning of Full Bore Electromagnetic flow meter with factory calibrated, Regular

Power Operated, flanged connection, Flow sensor, Indicator, transmitter and totaliser with all accessories viz. surge arrestor,

associated cables, cabinets, hardwares, etc complete as per following specifications:

(i) Flow Meter/ Sensor:

DC pulsed type, IP 68 Protection, Flanged process connection as per IS 1538 or equivalent standard, SS304/ Metallic Alloy Flow

Tube, SS316/ SS 316 L/ Hastelloy Sensor, SS316/ Hastelloy Grounding Ring/ Inbuilt Grounding Electrode, Neoprene/ Polyurethane/

Hard Rubber/ Rilsan lining, SS304/ Die Cast Aluminium/ Carbon steel with Anticorrosive Paint Coil Housing with Junction Box, CS

17 17.1 (ii) Flow Transmitter/ Converter ( Remote Field Mounted): 1 No. 134422.00

Microprocessor based, Modular design, 2 line LCD for indication of actual flow rate, forward, reverse, sum totaliser display, ±0.5%

accuracy at 0.3 to 4 m/sec velocity, 4 to 20 mA with HART/Modbus output, one scalable pulse, one status output, IP 67 protection,

Die cast aluminium/ polycarbonate/ SS316 with Anticorrosive Paint/ PU finish with glass window enclosure, Inbuilt EEPROM and

Data Logger, 20 meters cable length for sensor to transmitter communication etc alongwith wall mounted/ stand mounted cabinet.

(a) Full Bore electromagnetic Flow Meter (Regular Power Operated) 300 mm Dia (PN 1.0 Rating)- For Nikava CWS to ESR

(b) Full Bore electromagnetic Flow Meter (Regular Power Operated) 250 mm Dia (PN 1.6 Rating)- For Nikava CWS to

17.2 Danidhar HGLR 1 No. 128921.10

Total of Section-(A) Rs.

(B) POWER DISTRIBUTION SECTION

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 50 KA. and

above at 415 V. having normal current rating 400A. with variable thermal & magnetic release suitable to work on A.C.supply

c/s. with all internal connections & complete erected in existing 16 G.M.S. housing.

ICU=100% of ICS only of Cat-III

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor, galvanised steel flat strip /

round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps / in

19 19.1 existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS:7098 40 Mts. 954.00

(Part-1) & IEC:60502 (Part-1) of following sizes:

1 X 3.5 X 300 Sq.mm. - from Transformer to MCCB to PCC/LVDB Panels.

3.5 C x 150 Sq. mm Single Times Laying (From LVDB Panel to MCC Panel of Nikava CWS to Danidhar HGLR & APFC Panel )

19.3 3.5 C x 70 Sq. mm Single Times Laying (From LVDB Panel to MCC Panel of Nikava CWS to ESR ) 15 Mtr. 287.00

Sr. Item Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

LV POWER CONTROL CENTER (LVDB Panel)

Supply at Site, Installation, Testing & Commissioning of LV Distribution Board (LVDB) totally enclosed, dust & vermin proof, indoor type, fabricated

from CRCA sheet steel with minimum thickness of 3 mm for base frame/ channel/ gland plates, 2.0 mm for load bearing members/ doors & 1.6 mm

for internal partitions, minimum degree of protection - IP 52 as per IS: 2147, suitable for operation on 3-Phase, 4 Wire, 415V, 50Hz, Neutral

effectively grounded, with instrumentation compartments accomodating meters, aux / protective relays, LED type indicating lamps & control MCBs

as per IS: 13947, resin cast current & voltage transformers as per IS: 2705, air insulated electrolitic grade Aluminum/ Copper busbar for three phase

& neutral system, GI earth bus for entire length, power/ control wiring using 1100V grade, FRLS insulated copper conductor wires conforming to IS:

694 & 8130, equipment fittings, horizontally running busbar compartment height of minimum 300 mm, incoming & ougoing cable connections for

1100V grade, Aluminium/ Copper conductor XLPE/ PVC insulated & PVC sheathed armoured cable.

LV PCC Panel (LVDB) shall have required incomming/outgoing modules of following type & ratings.

(a) 1 Nos. Incomers with approved Make 400 Amp, 4 Pole, Air Break Fixed MCCB conforms to IS/ IEC 60947-2 with trip free mechanism, current

20 20 limiting type with Thermal Magnetic / Microprocessor release (O / C, S / C & E / F) with adjustable settings & having minimum 2NO+2NC potential 1 No 149175.00

free auxiliary contacts with all necessary Electro-Mechanical protections & interlocks etc. MCCB module, when used as Incommer(s), shall have

enclosure dimensions- 1800(H) x 600(W) x 600 (D) & following technical features: 4 Pole, MCCB with Breaking Capacity of Icu=36 KA at 415V

(Ics=100% of Icu), TM release with all necessary electro-mechanical protections, interlocks etc.

(b) 02 Outgoing Feeder of 250 Amp MCCB(for Nikava CWS to Danidhar HGLR & APFC Panel ), 02 Outgoing Feeder of 160 Amp MCCB(for

Nikava CWS to ESR ) 4 Pole, Air Break Fixed MCCB conforms to IS/ IEC 60947-2 with trip free mechanism, current limiting type with Thermal

Magnetic / Microprocessor release (O / C, S / C & E / F) with adjustable settings & having minimum 2NO+2NC potential free auxiliary contacts with

all necessary Electro-Mechanical protections & interlocks etc. MCCB module, when used as outgong(s), shall have enclosure dimensions- 400(H) x

600(W) x 600 (D) & following technical features: 4 Pole, MCCB with Breaking Capacity of Icu=36 KA at 415V (Ics=100% of Icu), TM release with all

necessary electro-mechanical protections, interlocks etc.

(c) 3 Nos. Outgoings each with 63A TPN MCB for outdoor lighting (C Curve) having 10kA breaking capacity & confirming to IS

SITC of LV MCC Panel totally enclosed, dust & bermin proof, indoor type, minimum degree of protection - IP 52 as per IS:

operation on 3-Phase, 4 Wire, 415V, 50Hz, Neutral effectively grounded, with instrumentation compartments accomodating LED

type indicating lamps, control contactors as per IS: 13947, CT of accuracy class- I as per IS: 2705, relays, meters & control MCBs,

air insulated electrolitic grade Aluminum bus bar for three phase & neutral system with incomming breaker- microprocessor based

Air Circuit Breakers (electrically operated drawout type)/ air break fixed type MCCB with trip free mechanism, current limiting type as

per IS: 8828, Motor Contractor (as per type -2 coordination), Overload Relay with built-in single phasing prevention feature &

auxiliary feeders as per SLD drawings, momentary contact type push buttons, equipment fittings, bus bars, cable boxes, cable gland,

incoming & ougoing cable connection for 1100V grade, Aluminium/ Copper conductor XLPE / PVC insulated & PVC sheathed

armoured cable, 10% spare terminals, power wiring using 1100V grade, FRLS insulated copper conductor wires conforming to IS:

21 21.1 694 & 8130, cable compartments / alleys of minimum 300 mm size, GI / Al earth bus bar for entire length. MCC shall be fabricated 1 Nos. 523979.00

from cold rolled, coled annealed (CRCA) sheet steel & minimum thickness of various members shall be as follows:

Base Frame / Channel / Gland Plate: 3 mm, Load Bearing Members / Doors: 2 mm and Internal Partitions: 1.6 mm

microprocessor based Soft Starter with built-in by pass contactor,Semiconductor Fuses, Harmonic Filters, cast resin type

CT, Digital MFM, Analogue Ammeter & minimum 10 Channel Temperature Scanner with RS 485 communication port.

MCC Panel of 90 KW (1 Working Feeder microprocessor based Soft starter & 1 Working Feeder microprocessor VFD Based

) + Extra 1 feeder of 125 Amp + Extra 2 feeder of 63 Amp- For Nikava CWS to Danidhar HGLR

Sr. Item Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Auto Transformer Starter with MCCB, Contactor, O/L relay, cast resin type CT, Digital MFM, Analogue Ammeter, SPP, Timer

21.2 MCC Panel of 37 KW (2 Working Feeder) + Extra 1 feeder of 125 Amp + Extra 1 feeder of 63 Amp- For Nikava CWS to ESR 1 Nos. 137796.00

APFCR Panel: 60 KVAR

Suplly,Installation,testing & commissionin LV APFC panel consisting of required capcitor banks for continious duty to improve P.F.

0.85 to 0.99 in rquired steps enclosed in dust & vermin proof compartment, indoortye, fabricated from CRCAsheet steel with minimu

thickness of 3 mm for base frame / channel / gland plate, 2.0 mm for load bearing members / doors & 1.6 mm for internal partitions,

minimum degree of protection - IP 42, busbar chamber, required size of Al bus bar/terminals, 10 stage APFC relay, metering,

indicating lamps, push button, with detuned reactor complete as per IS:16636-2017 with latest ammendment & detailed technical

specification and data sheet as under.

60 KVAR APFC panel consisting following items.

a) 250 A, 50 kA for 1sec TP, TM based MCCB with spreader terminal & rotary handle

22 22 b) 0-250 A range analouge ammeter of 96 x 96 mm size with selector switch 1 Set 188070.00

c) 3 nos. 250/5A, 10 VA CL-1.0 cast resin type current transformer d) Suitable raiting of MCCB/MCB & Contractors for each

e) Suitable rating APP type capacitor banks (vacuum impregnated with non-PCB / non toxic oil, internally delta connected with built

in internal fuses complete with discharge resistances & terminal cover) of approved make in required steps with well suited detuned

reactor is placed in series with each capacitor step. (e.g., 60 KVAR capacity will be provided in steps of 2 nos x 5KVAR, 2 nos x

10 KVAR & 2 nos x 15 KVAR)

f) Enclosure dimensions-1600 (H) x 1150 (W) x 600 (D)

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor, galvanised steel flat strip /

round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps / in

23 23.1 existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS:7098 50 Mtr. 355.00

(Part-1) & IEC:60502 (Part-1) of following sizes:

3.0 C x 120 Sq. mm Single Times Laying (From MCC Panel to Motor Feeders of Nikava CWS to Danidhar HGLR)

23.2 3.0 C x 50 Sq. mm Single Times Laying (From MCC Panel to Motor Feeders of Nikava CWS to ESR) 50 Mtr. 179.00

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and

heavy duty cover.(approved make OEM has to submit test certificate) & having back filling compound of (B) Inner chemical (CCM

24 24 Compound)- Resistivity:- 0.2 • / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- 4 Job 4546.00

<2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary test report must be

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Sr. Item Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Providing and erecting required size Aluminium strip for earthing of H.T. , OCB / ACB / Transformer, LT panel board, Motors etc.

25 25 using copper clamp. 150 Kg 223.00

Supply & laying GI ladder type cable trays with side channels of size - 75 x 15 x 15 mm / 100 x 15 x 15 mm & rungs of size - 35 x15

x 15 mm spaced at 250 mm apart, fabricated from 2 mm thick sheet steel in standard length of 2.5 meter, duly hot dipped

galvanized after fabrication as per IS 2629-1989/ IS 4759-1984 including accessories such as coupler plates/ fish plates, bends,

26 26 tees, reducers, elbows, covers and electro-galvanized hardware etc, erected on existing support as per specification and instruction 50 Mtr. 336.00

of Engineer-in-charge.

150(W)X75(H)X2 mm thick

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour

27 27 for earth continuity of following size (A) With medium class Rigid PVC pipe and accessories with medium class Rigid PVC pipe and 80 Mtr 111.00

a. 2 wire 4 sq.mm (with 2.5 sq.mm earth wire)

LIGHTING DISTRIBUTION BOARD:

Providing & Erecting following type of Modular type accessories mounted with PVC/ metallic box, single mounting base frame

covered with textured/ metallic front plate, modules erected with necessary connection as desired by Engineer In charge. 6 no. 16A

single Pole Modular MCB Switch, Cat. II (1 point of pump room inside lights, 4 point of pump room outside lights, 1 point of celling

fan) & 1 No. incomer 40 Amp. DP ELCB/RCCB for lighting & inductive load (C Curve) having 10kA breaking capacity & confirming to

Supplying and erecting LED Street Light (IP-65), surge protection -4KV integral and 10 kv non integral, light must have 440 VAC

29 29 line supply protection. It should withstand 48 Hours for 440 VAC line supply with required fittings, connectors, accessories etc 6 Nos. 4876.00

complete. 70 Watt (Cat-II)

Supplying and erecting R&B approved make of LED Suraface mounted luminaire with rear reflector suitable for office and laboratory

30 30 applications with 22-24 Watt LED (Cat.II) Lamp with all required fittings, connectors, accessories complete. 6 Each 645.00

Providing & erecting Approved make Celling Fan with double ball bearing ISI mark with condeser A.C 230v.50 c/s 1200mm sweep

31 31 complete ,canopy and 30 cms. Dowen rod erected on existing hook or clamp with 24/0.2 , 3 core flexible wire with earthing with 2 Nos. 1581.00

regulator, modular switch box.(Make shall be approved by Engineer incharge)

32 32 Supply 4.00 mm thick Rubber Mat of required length and breath.- 1 * 10 Sq.Mtr 10 Sq. Mt 1017.00

Total of Section-(B) Rs.

Total of Section ( A+B ) Rs.

Executive Engineer

P.H.Mechanical Division Jamnagar

Name of Project :- SITC of Pumping Machinery under Kalavad Group RWSS

Name Of Work :- Supply, Installation, Testing & Comissioning of HSCF and SM Pump Sets with Mechanical and Electrical Equipments & Accessories Etc. Complete at

Various Headworks under Kalavad Group RWSS in Ta.- Kalavad, Distt.-Jamnagar.

Head Works :- Panchdevda Hw

Duty Point :- (1) Panchdevda CWS to ESR:- 55.56 LPS(200 m3/Hr) X 40 Mtr. Head X 37 KW ( 2 Set) &

(2) Panchdevda RWS to FP:- 253 LPS X 15 Mtr. Head X 55 KW ( 2 Set)

Sr. Item Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

(A) MECHANICAL EQUIPMENTS SECTION

Dismantalling of existing 2 No. 30 KW HSCF Pump Set(Panchdevada to ESR Section) at site with its cable, MS Pipe(Suction,

1 1.1 Delivery, Common Header Pipe) with Butterfly, DPCV Valve, expansion Bellow etc. complete as per instructions of engineer-in-charge. 1 Job 13450.00

Dismantalling of existing 1 No. 55 KW HSCF Pump Set(Panchdevada to Filter Plant Section) at site with its cable, etc. complete as

1.2 per instructions of engineer-in-charge. 1 Job 6250.00

Supply, installation, testing & commissioning of horizontal split casing centrifugal pump motor set of specified duty parameters

& guaranteed efficiency of following MOC with specified capacity, horizontal foot mounted TEFC squirrel cage induction motor

(with minimum IE-3 efficiency class), working on three phase AC supply with 50 Hz ± 3%, 415 V ± 10%, rated speed 1450 RPM

along with fabricated MS base frame, coupling, coupling guard, foundation bolts etc. as per relevant IS.

2 2.1 M.O.C.: Impeller & Wearing Rings: CF8M, Casing: Cast Steel WCB , Shaft: SS 410, Shaft Sleeve: SS 410, Mechanical Seal 2 Set 316122.00

(Above 30 kW), Base Frame: MS

(i) Panchdevda CWS to ESR:- 55.56 LPS(200 m3/Hr) X 40 Mtr. Head X 37 KW

2.2 (ii) Panchdevda RWS to FP:- 253 LPS X 15 Mtr. Head X 55 KW- For SITC Work 1 Set 463830.00

2.3 (ii) Panchdevda RWS to FP:- 253 LPS X 15 Mtr. Head X 55 KW- For Supply Only 1 Set 451330.00

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of MS Pipe conforming to IS-3589-2001 or its latest

3 3.1 revision/ammendment including loading, unloading conveyance to site, stacking etc. all complete. 12 Mtr 1852.40

Pipe dia in OD- 219.1 mm, Thickness- 4.5 mm (Delivery and Suction Pipe for Panchdevda CWS to ESR Section)

3.2 Pipe dia in OD- 273 mm, Thickness- 5.0 mm (Common Header Pipe for Panchdevda CWS to ESR Section) 12 Mtr 2569.60

Sr. Item Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of GI Pipe conforming to IS-1239 or its latest

4 4 revision/ammendment including loading, unloading conveyance to site, stacking etc. all complete. 15 Mtr 657.80

80 mm Dia Medium Duty (Bypass Pipe for ESR & Danidhar HGLR Section)

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of M.S. Special Such as Suction Strainer, Flanges, Concentric

/ Eccentric Nozzles, Reducer / Expanders, Bend, Bolts, Nuts,etc. Complete. as per relevent IS Standard.

For 219.1 mm OD, 273 mm OD & 80 mm dia Pipe

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of ISI mark Both End Flanged Butterfly Valve as per IS

(Latest Edition) with sleeve of EPDM & disc, shaft & internal partsof SS-410, of Board Approved make to be installed on Suction MS

Pipings including cost of all labour, jointing material, including nut bolts as per specification & requirement including all taxes, insurance,

6 6.1 transportation, freight charges, octroi, inspection charges, loading, unloading,conveyance to departmental stores/site, stacking etc. 1 No. 9509.00

(i) 250 mm Dia (PN 1.0 Rating) for Common Header Pipe- Panchdevda CWS to ESR

6.2 (ii) 200 mm Dia (PN 1.0 Rating) for Delivery Pipe- Panchdevda CWS to ESR 2 No. 6608.00

Supply at site, Storage, Erection, Installation, Testing & commissioning of ISI Mark Both End Flanged Swing Plate Type Dual Plate

Check Valve of Approved make to be installed on DELIVERY MS Pipings including cost of all labour, jointing material,including nut

7 7.1 bolts as per specification & requirement including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, 1 No. 27705.00

unloading,conveyance to departmental stores/site, stacking etc. complete.

(i) 250 mm Dia (PN 1.0 Rating) for Common Header Pipe- For Panchdevda CWS to ESR

7.2 (ii) 200 mm Dia (PN 1.0 Rating) for Delivery Pipe- For Panchdevda CWS to ESR 2 No. 16671.00

Supply, installation, testing & commissioning of flange ends Expansion Bellow as per EJMA standards of overall length of minimum

300 mm, designed for 15 mm axial compression and 5 mm axial extension with tie rods etc. of following MOC & pressure ratings. MOC:

8 8.1 Bellows: SA 240 Gr. 304; Internal Sleeve: SA 240 Gr. 304; Weldends: IS 2062 Gr. B; Flanges: IS 2062 Gr. B (Drilling as per IS 1538 / IS 2 No. 7745.00

6392 ) & Limit Rods & Nuts: CS - IS

(i) 250 mm Dia (PN 1.0 Rating) for Common Header Pipe & Flowmeter- For Panchdevda CWS to ESR

8.2 (ii) 200 mm Dia (PN 1.0 Rating) for Suction & Delivery Pipe- For Panchdevda CWS to ESR 2 No. 6216.00

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of Both End Flanged ISI Mark C.I. Non Rising Spindle Type

Sluice Valve with hand wheel operated PD type short body of board approved make to be installed on By-pass piping including cost

of all labour, jointing material,including nut bolts as per specification & requirement including all taxes, insurance, transportation, freight

9 9.1 charges, octroi, inspection charges, loading, unloading,conveyance to departmental stores/site, stacking etc. complete. 2 No. 10555.00

(i) 200 mm Dia (PN 1.0 Rating) for Suction Pipe- For Panchdevda CWS to ESR

Sr. Item Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

9.2 (ii) 80 mm Dia (PN 1.0 Rating) for By Pass Pipe- For Panchdevda CWS to ESR 1 No. 3052.00

Supply, Installation, Testing, Commissioning of Bourdon Type Pressure Gauge, ±1% accuracy, Direct bottom 1/2" NPT (M) process

connection, IP 67, Glycerine filled, SS304 Case with Bayonet Type Bezel, SS316 L Bourdon Tube, SS 316 Movement material,

10 10 Aluminium dial with black graduation on white background, Micro Zero adjustable pointer, neoprene gasket, Blow out disc, shatter proof 3 Nos. 1029.00

glass, SS tag plate etc as per IS

(a) 100 mm Dial Size- 0 to 6 Kg/cm2- For Panchdevda CWS to ESR

Chain Pulley Block (Manually Operated) :

11 11 Providing and erecting chain pulley block with triple gear arrangement, lifting hook, load chain and hand chain and locking device with spur 1 No. 17400.00

gear travelling trolley and all accessories.- Capacity: 2 Tons

SITC of suitable size ISMB I Beam girder, MS Channel, MS Angle, etc. required for minimum 1 Ton capacity loading / unloading / lifting /

12 12 lowering for making a structure suitable for installation of chain pulley block so as to removable of the pump set for opeation and 700 KG 76.19

maintainace purposes to directly to load the same into the truck / pickup van, etc. complete.

Supplying & fixing Steel Chequered Plate having 7 mm thickness, duly painted with two coats of black Japan colour. (Average Wt.

13 13 kg/ Sq.Mtr.) 6 Sq. Mtr. 3497.00

Supply, installation, testing & commissioning of horizontal mono submersible pump set (Drain pump) as per IS: 14220 / 1994 & its latest

amendments of following duty parameters with suitable submersible motor as per IS: 9283 / 1994 & its latest amendments working on

14 14 phase, 415 V ± 10%, 50 ± 3% Hz power supply, rated speed 2900 RPM of following duty capacity. Material of Constructions: Impeller: 1 No. 15840.00

High tensile brass / LTB II; Casing: CI FG 260; Pump & Motor shaft: SS 304; Bearing Bush: LTB. Capacity:- 20 m3/hr x 10 mtr Head

Supply, testing & commissioning portable Diesel/Petrol driven self priming horizontal mono dewatering pump set with four wheel

15 15 trolley, GI medium duty delivery pipes, specials, suction strainer etc. complete set Material of Constructions: Impeller: Bronze, Casing: 2 No. 30864.00

CI, Shaft: Carbon Steel.

Providing & Laying Reinforced Cement Concrete in Thrust Block/Piping/Valves Supports etc. with Tar steel, Black Trap Kapchi as

16 16 Coarse Aggreate for Raft,Grillage Footing with Necessary Centering Form work, Consolidating as per Directive in 1:2:4 Ratio comp. as 3 Cu. Mtr. 8566.00

per site requriement

Sr. Item Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Design, Supply, Installation, Testing, Commissioning of Full Bore Electromagnetic flow meter with factory calibrated, Regular Power

Operated, flanged connection, Flow sensor, Indicator, transmitter and totaliser with all accessories viz. surge arrestor, associated

cables, cabinets, hardwares, etc complete as per following specifications:

(i) Flow Meter/ Sensor:

DC pulsed type, IP 68 Protection, Flanged process connection as per IS 1538 or equivalent standard, SS304/ Metallic Alloy Flow Tube,

SS316/ SS 316 L/ Hastelloy Sensor, SS316/ Hastelloy Grounding Ring/ Inbuilt Grounding Electrode, Neoprene/ Polyurethane/ Hard

Rubber/ Rilsan lining, SS304/ Die Cast Aluminium/ Carbon steel with Anticorrosive Paint Coil Housing with Junction Box, CS flanges.

(ii) Flow Transmitter/ Converter ( Remote Field Mounted):

17 17 Microprocessor based, Modular design, 2 line LCD for indication of actual flow rate, forward, reverse, sum totaliser display, ±0.5% 1 No. 117201.00

accuracy at 0.3 to 4 m/sec velocity, 4 to 20 mA with HART/Modbus output, one scalable pulse, one status output, IP 67 protection, Die

cast aluminium/ polycarbonate/ SS316 with Anticorrosive Paint/ PU finish with glass window enclosure, Inbuilt EEPROM and Data

Logger, 20 meters cable length for sensor to transmitter communication etc alongwith wall mounted/ stand mounted cabinet.

(a) Full Bore electromagnetic Flow Meter (Regular Power Operated) 250 mm Dia (PN 1.0 Rating)- For Panchdevda CWS to ESR

Total of Section-(A) Rs.

(B) POWER DISTRIBUTION SECTION

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V.

having normal current rating 125A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal

18 18 connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. 1 No. 7976.00

ICU=100% of ICS only of Cat-III (Panchdevada to ESR Section)

Sr. Item Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor, galvanised steel flat strip /

round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps / in existing

19 19 cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS:7098 (Part-1) & 80 Mtr. 287.00

IEC:60502 (Part-1) of following sizes:

1 X 3.5 X 70 Sq.mm. - from Transformer to MCCB to MCC Panel. (Panchdevada to ESR Section)

SITC of LV MCC Panel totally enclosed, dust & bermin proof, indoor type, minimum degree of protection - IP 52 as per IS:

operation on 3-Phase, 4 Wire, 415V, 50Hz, Neutral effectively grounded, with instrumentation compartments accomodating LED type

indicating lamps, control contactors as per IS: 13947, CT of accuracy class- I as per IS: 2705, relays, meters & control MCBs, air

insulated electrolitic grade Aluminum bus bar for three phase & neutral system with incomming breaker- microprocessor based Air Circuit

Breakers (electrically operated drawout type)/ air break fixed type MCCB with trip free mechanism, current limiting type as per IS:

Motor Contractor (as per type -2 coordination), Overload Relay with built-in single phasing prevention feature & auxiliary feeders as per

SLD drawings, momentary contact type push buttons, equipment fittings, bus bars, cable boxes, cable gland, incoming & ougoing cable

connection for 1100V grade, Aluminium/ Copper conductor XLPE / PVC insulated & PVC sheathed armoured cable, 10% spare

terminals, power wiring using 1100V grade, FRLS insulated copper conductor wires conforming to IS: 694 & 8130, cable compartments /

alleys of minimum 300 mm size, GI / Al earth bus bar for entire length. MCC shall be fabricated from cold rolled, coled annealed (CRCA)

sheet steel & minimum thickness of various members shall be as follows:

Base Frame / Channel / Gland Plate: 3 mm, Load Bearing Members / Doors: 2 mm and Internal Partitions: 1.6 mm

Auto Transformer Starter with MCCB, Contactor, O/L relay, cast resin type CT, Digital MFM, Analogue Ammeter, SPP, Timer etc.

MCC Panel of 37 KW (2 Working Feeder) + Extra 1 feeder of 125 Amp + Extra 2 feeder of 63 Amp- For Nikava CWS to ESR

Sr. Item Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Supply, installation, testing & commissioning both side extensible, Outdoor type HV Switchgear panel confirming to IS-3427, IS-2516

(PartI & II.sec.1 ) & IEC-60056 & IEC-62271-100/200 for use on 3phase, 50 Hz, unearthed AC supply system and having breaking/

ruptuing capacity of 500 MVA (26.3 kA for 3sec) complete with spring charged mechanism, ON-OFF mechanical push button, operation

counters, Breaker TNC switch, Breaker L/R switch, necessary auxiliary switches, closing coil, shunt trip, protection relays & Indicators

etc., complete.

The panel shall comprise of air insulated busbars provided with heat shrinkable PVC sleeves. The VCB trolley shall comprise of three

vacuum interrupters with epoxy support insulators and self aligning finger type isolating contacts and necessary mechanical interlocks,

safety shutters, isolating plugs. Enclosure shall be openable from front as well as rear end.

The breaker shall be Manual cum motorised mechanism with following accessories.

a) 96 x 96 mm square flush mounting type Ammeter & Volt meter with selector switches

b) Multi function meter

c) Double core, cast resin type current transofrmer having ratio as per requirement, one core for metering & one core for protection

having required class of accuracy.

d) Instantaneous under voltage relay & Temperature rise tripping Relay,

21 21 e) Triple pole IDMTL two over current and one earth fault relay with current setting range 50-200% and 10-40%

f) Electrical closing. coil & shunt trip coil operating on 110 V DC.

g) Auxiliary relay for anti pumping device.

h) Three limb, drawout type, feeder connected, cast resin insulated, three phase Potential transformer having ratio & burden as per

reqirement & Class 0.5 accuracy.

i) Annunciator Windows, Common Hooter / Alarm bell operating on 230 AC/ 110 V DC.

j) Cable boxes suitable to terminate 3 core XLPE cable of required size (As per design).

k) 230V AC to 110 V DC power pack for closing & tripping circuit common.

l) Breaker ON-OFF, Auto trip and spring charged indicators.

m) Phase indicating & panel illumination lamps with plug socket.

n) Space Heater with Thermostat.

11 kV HV Incomer-Cum-Outgoing (ICOG) Switchgear Panel- Comprising of 630 A Vacuum circuit breaker for 11/0.433 kV

distribution transformers (For Existing Transformer)

Supply, laying, testing & commissioning 11 / 11 kV (UE) grade, XLPE insulated, stranded Aluminium conductor, galvanised steel flat

strip / round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps / in

22 22 existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS: 7098 (Part- 50 Mtr. 1527.00

2) & IEC: 60502(Part-2), of following sizes:

3 Core 120 sq mm (For GEB to VCB Panel to Transformer)

Sr. Item Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Providing & fitting heat shrink cable termination / jointing kits for 11 kV (UE) / 11 kV (E) grade XLPE insulated cable including necessary

earth connectivity connection, material & consummables making the termination/ joint complete ensuring the joint resistance is within the

23 23.1 permissble limit as per IS, of following types & sizes: 2 No. 7925.00

Indoor Terminations Kit suitable for 3C x 120 sq mm HT Cable

23.2 Outdoor Terminations Kit suitable for 3C x 150 sq mm HT Cable 2 No. 14467.00

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor, galvanised steel flat strip / round

wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps / in existing cable

24 24 trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS:7098 (Part-1) & 50 Mtr. 179.00

IEC:60502 (Part-1) of following sizes:

3.0 C x 50 Sq. mm Single Times Laying (From MCC Panel to Motor Feeders of Panchdevda CWS to ESR)

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by

highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty

cover.(approved make OEM has to submit test certificate) & having back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 • / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary test report must be submitted.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting required size Aluminium strip for earthing of H.T. , OCB / ACB / Transformer, LT panel board, Motors etc. using

26 26 copper clamp. 100 Kg 223.00

Supply & laying GI ladder type cable trays with side channels of size - 75 x 15 x 15 mm / 100 x 15 x 15 mm & rungs of size - 35 x15 x

15 mm spaced at 250 mm apart, fabricated from 2 mm thick sheet steel in standard length of 2.5 meter, duly hot dipped galvanized after

fabrication as per IS 2629-1989/ IS 4759-1984 including accessories such as coupler plates/ fish plates, bends, tees, reducers, elbows,

27 27 covers and electro-galvanized hardware etc, erected on existing support as per specification and instruction of Engineer-in-charge. 50 Mtr. 336.00

150(W)X75(H)X2 mm thick

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type

of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth

28 28 continuity of following size (A) With medium class Rigid PVC pipe and accessories with medium class Rigid PVC pipe and accessories. 80 Mtr 111.00

a. 2 wire 4 sq.mm (with 2.5 sq.mm earth wire)

Sr. Item Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

LIGHTING DISTRIBUTION BOARD:

Providing & Erecting following type of Modular type accessories mounted with PVC/ metallic box, single mounting base frame covered

with textured/ metallic front plate, modules erected with necessary connection as desired by Engineer In charge. 6 no. 16A single Pole

Modular MCB Switch, Cat. II (1 point of pump room inside lights, 4 point of pump room outside lights, 1 point of celling fan) & 1 No.

incomer 40 Amp. DP ELCB/RCCB for lighting & inductive load (C Curve) having 10kA breaking capacity & confirming to IS

Supplying and erecting LED Street Light (IP-65), surge protection -4KV integral and 10 kv non integral, light must have 440 VAC line

30 30 supply protection. It should withstand 48 Hours for 440 VAC line supply with required fittings, connectors, accessories etc complete. 70 6 Nos. 4876.00

Supplying and erecting R&B approved make of LED Suraface mounted luminaire with rear reflector suitable for office and laboratory

31 31 applications with 22-24 Watt LED (Cat.II) Lamp with all required fittings, connectors, accessories complete. 6 Each 645.00

Providing & erecting Approved make Celling Fan with double ball bearing ISI mark with condeser A.C 230v.50 c/s 1200mm sweep

32 32 complete ,canopy and 30 cms. Dowen rod erected on existing hook or clamp with 24/0.2 , 3 core flexible wire with earthing with regulator, 2 Nos. 1581.00

modular switch box.(Make shall be approved by Engineer incharge)

33 33 Supply 4.00 mm thick Rubber Mat of required length and breath.- 1 * 10 Sq.Mtr 10 Sq. Mt 1017.00

Total of Section-(B) Rs.

Total of Section ( A+B ) Rs.

Executive Engineer

P.H.Mechanical Division Jamnagar

Name of Project :- SITC of Pumping Machinery under Kalavad Group RWSS

Name Of Work :- Supply, Installation, Testing & Comissioning of HSCF and SM Pump Sets with Mechanical and Electrical Equipments & Accessories Etc. Complete at

Various Headworks under Kalavad Group RWSS in Ta.- Kalavad, Distt.-Jamnagar.

Head Works :- Sanala Sub Hw

Duty Point :- (1) Sanala NC 20 Sump to Sanala Sub Hw:- 2900 LPM X 8 Mtr. Head x 12.5 HP- ( 2 Set) &

(2) Sanala Sub Hw to Prabhuji Pipaliya & Machhalivad:- 440 LPM X 52 Mtr. Head x 15 HP- ( 2 Set)

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

(A) MECHANICAL EQUIPMENTS SECTION

Dismantalling of Existing 2 No. 7 KW SCF Pump Set(NC 20 Sump to Sanala Sub Hw Section) at site with its

1 1 cable, MS Pipe etc. complete as per instructions of engineer-in-charge. 1 Job 20948.00

Supply at site, Storage, Erection, Installation, Testing & Commissioning of Horizontal type Horizontal Monoset Sub

Pump (SM) set 2900/1450 RPM, 3 Phase AC Supply, 50 HZ ± 3%, 415 V ± 10%, following IS 14220 along with

suitable foundation / Installation device with 15 Mtr Power & Control cable of following material of Construction:-

Casing - C.I. FG 260, Impeller - Bronze & Shaft- SS 410 etc as per detailed specifications & requirement comp.

2 2.1 (i)Capacity:- SM 2.9:- 440 LPM(7.33 LPS) at 52 Mts. Head with minimum 15 HP motor ratings.- Sanala Sub Hw 2 Set 27720.00

to Prabhuji Pipaliya & Machhalivad

If not possible in horizontal SM pump, then vertical SM pump will be accepted.

(ii)Capacity:- 2900 LPM(48.33 LPS) at 8 Mts. Head with minimum 12.5 HP motor ratings.- Sanala NC 20 Sump to

2.2 Sanala Sub Hw 2 Set 26088.70

If not possible in horizontal SM pump, then vertical SM pump will be accepted.

Installation, Testing & Commissioning of Existing 2 No. 21 LPS x 17 Mtr Head x 7 KW SCF Pump Set into

3 3 Sump for Sanala Sub Hw to ESR Section at site with its cable, etc. complete as per instructions of engineer-in- 2 Job 20948.00

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of MS Pipe conforming to IS-3589-2001 or

its latest revision/ammendment including loading, unloading conveyance to site, stacking etc. all complete.

4 4.1 Pipe dia in OD- 219.1 mm, Thickness- 4.5 mm (Common Header Pipe for Sanala NC 20 Sump to Sanala Sub 24 Mtr 1852.40

Pipe dia in OD- 168.3 mm, Thickness- 4.5 mm (Common Header Pipe for Sanala Sub Hw to ESR Section &

4.2 Delivery Pipe for Sanala NC 20 Sump to Sanala Sub Hw) 24 Mtr 1413.50

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of GI Pipe conforming to IS-1239 or its

latest revision/ammendment including loading, unloading conveyance to site, stacking etc. all complete.

5 5 100 mm Dia Medium Duty- Common Header Pipe for Sanala Sub Hw to Prabhuji Pipaliya & Machhalivad 6 Mtr 950.40

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of M.S. Special Such as Suction Strainer,

6 6 Flanges, Concentric / Eccentric Nozzles, Reducer / Expanders, Bend, Bolts, Nuts,etc. Complete. as per relevent IS 300 Kgs. 105.60

Standard as per site requirement.

Supplying, Installation, Testing & Commissioning in standard length ISI mark high density polyethylene H.D.P.E. Pipes

suitable for potable water as per IS specification no. 4984/1995 including all local and central taxes, transportation,

7 7.1 freight charges, octroi, inspection charges, loading, unloading, conveyance to dept. stores etc. comp. 80 Mtr 424.60

110 mm Dia HDPE Pipe- 10 kg/cm2- Delivery Pipe for Sanala Sub Hw to ESR Section

90 mm Dia HDPE Pipe- 10 kg/cm2- Delivery Pipe for Sanala Sub Hw to Prabhuji Pipaliya & Machhalivad

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of ISI mark Both End Flanged Butterfly

Valve as per IS 13095 (Latest Edition) with sleeve of EPDM & disc, shaft & internal partsof SS-410, of Board

Approved make to be installed on Suction MS Pipings including cost of all labour, jointing material, including nut bolts as

per specification & requirement including all taxes, insurance, transportation, freight charges, octroi, inspection

8 8.1 charges, loading, unloading,conveyance to departmental stores/site, stacking etc. complete. 3 No. 4674.00

(i) 150 mm Dia (PN 1.0 Rating) for Common Header Pipe- Sanala Sub Hw to ESR Section & Delivery Pipe-

Sanala NC 20 Sump to Sanala Sub Hw

8.2 (ii) 200 mm Dia (PN 1.0 Rating) for Common Header Pipe- Sanala NC 20 Sump to Sanala Sub Hw 1 No. 6608.00

Supply at site, Storage, Erection, Installation, Testing & commissioning of ISI Mark Both End Flanged Swing Plate

Type Dual Plate Check Valve of Approved make to be installed on DELIVERY MS Pipings including cost of all labour,

jointing material,including nut bolts as per specification & requirement including all taxes, insurance, transportation,

9 9.1 freight charges, octroi, inspection charges, loading, unloading,conveyance to departmental stores/site, stacking etc. 3 No. 8612.00

(i) 150 mm Dia (PN 1.0 Rating) for Common Header Pipe- Sanala Sub Hw to ESR Section & Delivery Pipe-

Sanala NC 20 Sump to Sanala Sub Hw

9.2 (ii) 200 mm Dia (PN 1.0 Rating) for Common Header Pipe- Sanala NC 20 Sump to Sanala Sub Hw 1 No. 16671.00

Supply, installation, testing & commissioning of flange ends Expansion Bellow as per EJMA standards of overall

length of minimum 300 mm, designed for 15 mm axial compression and 5 mm axial extension with tie rods etc. of

following MOC & pressure ratings. MOC: Bellows: SA 240 Gr. 304; Internal Sleeve: SA 240 Gr. 304; Weldends: IS

10 10.1 2062 Gr. B; Flanges: IS 2062 Gr. B (Drilling as per IS 1538 / IS 6392 ) & Limit Rods & Nuts: CS - IS 1367 3 No. 4656.00

(i) 150 mm Dia (PN 1.0 Rating) for Common Header Pipe- Sanala Sub Hw to ESR Section & Delivery Pipe-

Sanala NC 20 Sump to Sanala Sub Hw

10.2 (ii) 200 mm Dia (PN 1.0 Rating) for Common Header Pipe- Sanala NC 20 Sump to Sanala Sub Hw 1 No. 6216.00

(ii) 100 mm Dia (PN 1.6 Rating) for Common Header Pipe- Sanala Sub Hw to Prabhuji Pipaliya & Machhalivad

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of ISI mark Both End Flanged Hand

Wheel/Cap Operated Sluice Valve as per IS: 14846 (Latest Edition) of Board Approved make to be installed on

DELIVERY/Common Header MS/HDPE Pipings including cost of all labour, jointing material, including nut bolts as per

11 11.1 specification & requirement including all taxes, insurance, transportation, freight charges, octroi, inspection charges, 2 No. 4943.00

loading, unloading,conveyance to departmental stores/site, stacking etc. complete.

Size: 125 mm Dia, PN 1.0 - Delivery Pipe for Sanala Sub Hw to ESR Section

Size: 100 mm Dia, PN 1.6 - Delivery & Common Header Pipe for Sanala Sub Hw to Prabhuji Pipaliya &

11.2 Machhalivad 3 No. 4037.00

Supply at site, Storage, Erection, Installation, Testing & commissioning of ISI Mark Both End Flanged C.I. Reflux/ Non

12 12.1 return Valve with IS: 5312, of Approved make to be installed on DELIVERY/Common Header MS Pipings 2 Nos. 7229.00

mmofDia,all labour,

PN 1.6 jointing material,including

- Delivery & Common Header nut bolts as per

Pipe specification

for Sanala Sub Hw& requirement

to Prabhujiincluding

12.2 Machhalivad 3 No. 6002.00

Supply, Installation, Testing, Commissioning of Bourdon Type Pressure Gauge, ±1% accuracy, Direct bottom 1/2"

NPT (M) process connection, IP 67, Glycerine filled, SS304 Case with Bayonet Type Bezel, SS316 L Bourdon Tube,

SS 316 Movement material, Aluminium dial with black graduation on white background, Micro Zero adjustable pointer,

13 13.1 neoprene gasket, Blow out disc, shatter proof glass, SS tag plate etc as per IS 3624. 6 Nos. 1029.00

(a) 100 mm Dial Size- 0 to 6 Kg/cm2- 3 No For Sanala Sub Hw to Prabhuji Pipaliya & Machhalivad &

100 mm Dial Size- 0 to 4 Kg/cm2- 3 No For Sanala Sub Hw to ESR Section

(b) 100 mm Dial Size- 0 to 2.1 Kg/cm2- 3 No For Sanala NC 20 Sump to Sanala Sub Hw 3 Nos. 1143.00

Chain Pulley Block (Manually Operated) :

14 14 Providing and erecting chain pulley block with triple gear arrangement, lifting hook, load chain and hand chain and 2 No. 14400.00

locking device with spur gear travelling trolley and all accessories.- Capacity: 1 Tons

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

SITC of suitable size ISMB I Beam girder, MS Channel, MS Angle, etc. required for minimum 1 Ton capacity loading /

15 15 unloading / lifting / lowering for making a structure suitable for installation of chain pulley block so as to removable of 1000 KG 76.19

the pump set for opeation and maintainace purposes to directly to load the same into the truck / pickup van, etc.

Providing & Laying Reinforced Cement Concrete in Thrust Block/Piping/Valves Supports etc. with Tar steel, Black

16 16 Trap Kapchi as Coarse Aggreate for Raft,Grillage Footing with Necessary Centering Form work, Consolidating as per 2 Cu. Mtr. 8566.00

Directive in 1:2:4 Ratio comp. as per site requriement

Design, Supply, Installation, Testing, Commissioning of Full Bore Electromagnetic flow meter with factory calibrated,

Regular Power Operated, flanged connection, Flow sensor, Indicator, transmitter and totaliser with all accessories viz.

surge arrestor, associated cables, cabinets, hardwares, etc complete as per following specifications:

(i) Flow Meter/ Sensor:

DC pulsed type, IP 68 Protection, Flanged process connection as per IS 1538 or equivalent standard, SS304/ Metallic

Alloy Flow Tube, SS316/ SS 316 L/ Hastelloy Sensor, SS316/ Hastelloy Grounding Ring/ Inbuilt Grounding Electrode,

Neoprene/ Polyurethane/ Hard Rubber/ Rilsan lining, SS304/ Die Cast Aluminium/ Carbon steel with Anticorrosive Paint

Coil Housing with Junction Box, CS flanges.

(ii) Flow Transmitter/ Converter ( Remote Field Mounted):

Microprocessor based, Modular design, 2 line LCD for indication of actual flow rate, forward, reverse, sum totaliser

display, ±0.5% accuracy at 0.3 to 4 m/sec velocity, 4 to 20 mA with HART/Modbus output, one scalable pulse, one

status output, IP 67 protection, Die cast aluminium/ polycarbonate/ SS316 with Anticorrosive Paint/ PU finish with

glass window enclosure, Inbuilt EEPROM and Data Logger, 20 meters cable length for sensor to transmitter

communication etc alongwith wall mounted/ stand mounted cabinet.

(a) Full Bore electromagnetic Flow Meter (Regular Power Operated) 100 mm Dia (PN 1.6 Rating)- Sanala Sub

Hw to Prabhuji Pipaliya & Machhalivad

(b) Full Bore electromagnetic Flow Meter (Regular Power Operated) 200 mm Dia (PN 1.0 Rating)- For Sanala NC

17.2 20 Sump to Sanala Sub Hw 1 No. 106049.00

Installation, Testing, Commissioning of Existing Full Bore Electromagnetic flow meter (Regular Power Operated)

18 18 150 mm Dia (PN 1.0 Rating)- Sanala Sub Hw to ESR 1 No. 4367.00

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Total of Section-(A) Rs.

(B) POWER DISTRIBUTION SECTION

Approved make Four Pole LT Heavy Duty Switch Disconnector Fuse Unit Cubical type for panel mounting complete

with operating mechanism suitable to operate on 415V A.C. With HRC fuses of suitable load confirming to IS.

19 19 (Part I & III). of following capacities 1 No. 6060.00

(a) 125 Amp Cat-III

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor, galvanised

steel flat strip / round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface

with necessary clamps / in existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as per

20 20 site requirement) conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of following sizes: 100 Mts. 282.00

1 X 3.5 X 50 Sq.mm. - For Receiving Power from NC 20 Sanala Hw

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

LV POWER CONTROL CENTER (LVDB Panel)

Supply at Site, Installation, Testing & Commissioning of LV Distribution Board (LVDB) totally enclosed, dust & vermin proof, indoor

type, fabricated from CRCA sheet steel with minimum thickness of 3 mm for base frame/ channel/ gland plates, 2.0 mm for load

bearing members/ doors & 1.6 mm for internal partitions, minimum degree of protection - IP 52 as per IS: 2147, suitable for

operation on 3-Phase, 4 Wire, 415V, 50Hz, Neutral effectively grounded, with instrumentation compartments accomodating meters,

aux / protective relays, LED type indicating lamps & control MCBs as per IS: 13947, resin cast current & voltage transformers as per

IS: 2705, air insulated electrolitic grade Aluminum/ Copper busbar for three phase & neutral system, GI earth bus for entire length,

power/ control wiring using 1100V grade, FRLS insulated copper conductor wires conforming to IS: 694 & 8130, equipment fittings,

horizontally running busbar compartment height of minimum 300 mm, incoming & ougoing cable connections for 1100V grade,

Aluminium/ Copper conductor XLPE/ PVC insulated & PVC sheathed armoured cable.

LV PCC Panel (LVDB) shall have required incomming/outgoing modules of following type & ratings.

(a) 1 Nos. Incomers with approved Make 125 Amp, 4 Pole, Air Break Fixed MCCB conforms to IS/ IEC 60947-2 with trip free

21 21 mechanism, current limiting type with Thermal Magnetic / Microprocessor release (O / C, S / C & E / F) with adjustable settings & 1 No 91618.00

having minimum 2NO+2NC potential free auxiliary contacts with all necessary Electro-Mechanical protections & interlocks etc. MCCB

module, when used as Incommer(s), shall have enclosure dimensions- 1800(H) x 600(W) x 600 (D) & following technical features:

Pole, MCCB with Breaking Capacity of Icu=25 KA at 415V (Ics=100% of Icu), TM release with all necessary electro-mechanical

protections, interlocks etc.

(b) 03 Outgoing Feeder of 63 Amp MCCB(for All 3 Section) 4 Pole, Air Break Fixed MCCB conforms to IS/ IEC 60947-2 with trip

free mechanism, current limiting type with Thermal Magnetic / Microprocessor release (O / C, S / C & E / F) with adjustable settings

& having minimum 2NO+2NC potential free auxiliary contacts with all necessary Electro-Mechanical protections & interlocks etc.

MCCB module, when used as outgong(s), shall have enclosure dimensions- 300(H) x 500(W) x 600 (D) & following technical

features: 4 Pole, MCCB with Breaking Capacity of Icu=25 KA at 415V (Ics=100% of Icu), TM release with all necessary electro-

mechanical protections, interlocks etc.

(c) 2 Nos. Outgoings each with 63A TPN MCB for outdoor lighting (C Curve) having 10kA breaking capacity & confirming to IS

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium conductor, galvanised

steel flat strip / round wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface

with necessary clamps / in existing cable trench / cable trays / conduit / pipe sleeves at road crossing or floor as per

22 22 site requirement) conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of following sizes: 50 Mts. 182.00

1 X 3.5 X 25 Sq.mm. - From LVDB Panel to MCC Panel of all 3 Section

SITC of LV MCC panel totally enclosed dust and vermin proof, indoor type, minimum degree of protection- IP 52 as

per IS 2147 operating on 3 ph. 4- wire 415v 50Hz neutral effectively grounded with instrument compartment

accomodating led type indicating lamps, control contactor as per IS 13947, CT of accuracy class -I as per IS

relays, meters & control MCBs, air insulated electrolitic grade aluminium bus bar for 3 phases and neutral system with

incoming braker-microprocessor based air circuit breakers(electrically operated drawout type)/air break fixed type

MCCB with trip free mechanism, current limit type as per IS 8828, motor contactor(as per type-2 co-ordination),

overload relay with built in single phasing prevention feature and auxiliary feeders as per SLD drawings, momentary

contact type push button, equipment fittings, bus bars, cable boxes, cable glands, incoming/outgoing cable connections

for 1100 volt grade al/cu conductor XLPE/PVC insulated & PVC sheathed armoured cable,10% spare terminals, power

wiring using1100 volts grade, FRLS insulated copper conductor wires confirming to IS 694 & 8130, cable

compartment/alleys of minimum 300 mm size, GI earth bus bar For entire length. MCC shall be fabricated from cold

rolled, cold annealed(CRCA) sheet steel and minimum thickness of various members shall be as follows. Base

frame/channel/gland plate-3mm, Load bearing member/doors-2mm and internal partitions-1.6mm with fixed APP type

capacitor bank to improve PF on each outer feeder with as shown below size as per IS & as per tech. specifications

with providing of hour meter for each feeder of

Minimum incommer of 22 KW & Minimum outgoing 11 KW - 2 Working Feeder +2 feeder of 32 Amp (SD Starter

with MCCB with Rotary Handle, Contactor, O/L relay, cast resin type CT, Digital MFM, Analog Ammeter, SPP, Timer

Minimum incommer of 18.6 KW & Minimum outgoing 9.3 KW - 2 Working Feeder (SD Starter with MCCB with Rotary

23.2 Handle, Contactor, O/L relay, cast resin type CT, Digital MFM, Analog Ammeter, SPP, Timer etc.) 1 Nos. 33943.31

24 24 Installation, Testing, Commissioning of Existing 7 KW MCC(1W+1S) Panel- Sanala Sub Hw to ESR 1 No. 2651.00

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as

25 25.1 directed of following size. 150 Mts. 136.00

(i) 3 core 2.5 Sq. mm - For Sanala NC 20 Sump to Sanala Sub Hw & Sanala sub hw to ESR Section

25.2 (ii) 3 core 4 Sq. mm - For Sanala Sub Hw to Prabhuji Pipaliya & Machhalivad 50 Mts. 187.00

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia

of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for

following type of applications with chamber and heavy duty cover.(approved make OEM has to submit test certificate)

& having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 • / meter testing as per IEC

26 26 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing 6 Job 4546.00

compound should be capable to retain moisture for long time Necessary test report must be submitted.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire

in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated

27 27 stranded wire of green colour for earth continuity of following size (A) With medium class Rigid PVC pipe and 50 Mtr 111.00

accessories with medium class Rigid PVC pipe and accessories.

a. 2 wire 4 sq.mm (with 2.5 sq.mm earth wire)

Providing & erecting Approved make Celling Fan with double ball bearing ISI mark with condeser A.C 230v.50 c/s

1200mm sweep complete ,canopy and 30 cms. Dowen rod erected on existing hook or clamp with 24/0.2 , 3 core

28 28 flexible wire with earthing with regulator, modular switch box.(Make shall be approved by Engineer incharge) 2 Nos. 1581.00

Supplying and erecting LED Street Light (IP-65), surge protection -4KV integral and 10 kv non integral, light must have

29 29 440 VAC line supply protection. It should withstand 48 Hours for 440 VAC line supply with required fittings, connectors, 6 Nos. 4876.00

accessories etc complete. 70 Watt (Cat-II)

Total of Section B Rs.

Total of Section ( A+B ) Rs.

Executive Engineer

P.H.Mechanical Division Jamnagar

Name of Project :- SITC of Pumping Machinery under Kalavad Group RWSS

Name Of Work :- Supply, Installation, Testing & Comissioning of HSCF and SM Pump Sets with Mechanical and Electrical Equipments & Accessories Etc. Complete at

Various Headworks under Kalavad Group RWSS in Ta.- Kalavad, Distt.-Jamnagar.

Head Works :- Danidhar HGLR Hw

Duty Point :- (1) Danidhar Hw to Bhavabhi Khijadiya & Bamangam:- 344 LPM X 50 Mtr. Head x 10 HP- ( 2 Set) &

(2) Danidhar Hw to Toda Section:- 263 LPM X 30 Mtr. Head x 5 HP- ( 2 Set)

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

(A) MECHANICAL EQUIPMENTS SECTION

Supply at site, Storage, Erection, Installation, Testing & Commissioning of Horizontal type Horizontal Monoset Sub

Pump (SM) set 2900 RPM, 3 Phase AC Supply, 50 HZ ± 3%, 415 V ± 10%, following IS 14220 along with suitable

foundation / Installation device with 15 Mtr Power & Control cable of following material of Construction:-Casing - C.I.

1 1.1 FG 260, Impeller - Bronze & Shaft- SS 410 etc as per detailed specifications & requirement comp. 2 Set 20433.60

(i) Capacity:- 344 LPM at 50 Mts. Head with minimum 10 HP motor ratings.- Danidhar Hw to Bhavabhi Khijadiya &

If not possible in horizontal SM pump, then vertical SM pump will be accepted.

(ii) Capacity:- 263 LPM(4.38 LPS) at 30 Mts. Head with minimum 5 HP motor ratings.- Danidhar Hw to Toda Section

1.2 If not possible in horizontal SM pump, then vertical SM pump will be accepted. 2 Set 17107.20

Supplying, Installation, Testing & Commissioning in standard length ISI mark high density polyethylene H.D.P.E. Pipes

suitable for potable water as per IS specification no. 4984/1995 including all local and central taxes, transportation, freight

2 2 charges, octroi, inspection charges, loading, unloading, conveyance to dept. stores etc. comp. 150 Mtr 287.10

90 mm Dia HDPE Pipe- 10 kg/cm2- Delivery Pipe for Both Section

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of GI Pipe conforming to IS-1239 or its latest

3 3 revision/ammendment including loading, unloading conveyance to site, stacking etc. all complete. 12 Mtr 950.40

100 mm Dia Medium Duty- Common Header Pipe for both Section

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of M.S. Special Such as Suction Strainer,

4 4 Flanges, Concentric / Eccentric Nozzles, Reducer / Expanders, Bend, Bolts, Nuts,etc. Complete. as per relevent IS 200 Kgs. 105.60

Standard as per site requirement.

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of ISI mark Both End Flanged Hand

Wheel/Cap Operated Sluice Valve as per IS: 14846 (Latest Edition) of Board Approved make to be installed on

DELIVERY/Common Header MS Pipings including cost of all labour, jointing material, including nut bolts as per

5 5 specification & requirement including all taxes, insurance, transportation, freight charges, octroi, inspection charges, 6 No. 4002.00

loading, unloading,conveyance to departmental stores/site, stacking etc. complete.

Size: 100 mm Dia, PN 1.0 - for Both Section Delivery & Common Header Pipe

Supply at site, Storage, Erection, Installation, Testing & commissioning of ISI Mark Both End Flanged C.I. Reflux/ Non

return Valve with IS: 5312, of Approved make to be installed on DELIVERY/Common Header MS Pipings including

cost of all labour, jointing material,including nut bolts as per specification & requirement including all taxes, insurance,

6 6 transportation, freight charges, octroi, inspection charges, loading, unloading,conveyance to departmental stores/site, 6 Nos. 5787.00

stacking etc. complete.

Size: 100 mm Dia, PN 1.0 - for Both Section Delivery & Common Header Pipe

Supply, installation, testing & commissioning of flange ends Expansion Bellow as per EJMA standards of overall length

of minimum 300 mm, designed for 15 mm axial compression and 5 mm axial extension with tie rods etc. of following

7 7 MOC & pressure ratings. MOC: Bellows: SA 240 Gr. 304; Internal Sleeve: SA 240 Gr. 304; Weldends: IS 2062 Gr. B; 2 No. 3420.00

Flanges: IS 2062 Gr. B (Drilling as per IS 1538 / IS 6392 ) & Limit Rods & Nuts: CS - IS

100 mm Dia (PN 1.0 Rating) for Common Header Pipe

Supply, Installation, Testing, Commissioning of Bourdon Type Pressure Gauge, ±1% accuracy, Direct bottom 1/2"

NPT (M) process connection, IP 67, Glycerine filled, SS304 Case with Bayonet Type Bezel, SS316 L Bourdon Tube, SS

8 8 316 Movement material, Aluminium dial with black graduation on white background, Micro Zero adjustable pointer, 6 Nos. 1029.00

neoprene gasket, Blow out disc, shatter proof glass, SS tag plate etc as per IS

(a) 100 mm Dial Size- 0 to 6 Kg/cm2- For Panchdevda CWS to ESR

Chain Pulley Block (Manually Operated) :

Providing and erecting chain pulley block with triple gear arrangement, lifting hook, load chain and hand chain and locking

9 9 device with spur gear travelling trolley and all accessories.- Capacity: 1 Tons 2 No. 14400.00

Supply & Erection:

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

SITC of suitable size ISMB I Beam girder, MS Channel, MS Angle, etc. required for minimum 1 Ton capacity loading /

10 10 unloading / lifting / lowering for making a structure suitable for installation of chain pulley block so as to removable of the 1000 KG 76.19

pump set for opeation and maintainace purposes to directly to load the same into the truck / pickup van, etc. complete.

Providing & Laying Reinforced Cement Concrete in Thrust Block/Piping/Valves Supports etc. with Tar steel, Black

11 11 Trap Kapchi as Coarse Aggreate for Raft,Grillage Footing with Necessary Centering Form work, Consolidating as per 2 Cu. Mtr. 8566.00

Directive in 1:2:4 Ratio comp. as per site requriement

Design, Supply, Installation, Testing, Commissioning of Full Bore Electromagnetic flow meter with factory calibrated,

Regular Power Operated, flanged connection, Flow sensor, Indicator, transmitter and totaliser with all accessories viz.

surge arrestor, associated cables, cabinets, hardwares, etc complete as per following specifications:

(i) Flow Meter/ Sensor:

DC pulsed type, IP 68 Protection, Flanged process connection as per IS 1538 or equivalent standard, SS304/ Metallic

Alloy Flow Tube, SS316/ SS 316 L/ Hastelloy Sensor, SS316/ Hastelloy Grounding Ring/ Inbuilt Grounding Electrode,

Neoprene/ Polyurethane/ Hard Rubber/ Rilsan lining, SS304/ Die Cast Aluminium/ Carbon steel with Anticorrosive Paint

Coil Housing with Junction Box, CS flanges.

12 12 (ii) Flow Transmitter/ Converter ( Remote Field Mounted): 2 No. 65837.00

Microprocessor based, Modular design, 2 line LCD for indication of actual flow rate, forward, reverse, sum totaliser

display, ±0.5% accuracy at 0.3 to 4 m/sec velocity, 4 to 20 mA with HART/Modbus output, one scalable pulse, one

status output, IP 67 protection, Die cast aluminium/ polycarbonate/ SS316 with Anticorrosive Paint/ PU finish with glass

window enclosure, Inbuilt EEPROM and Data Logger, 20 meters cable length for sensor to transmitter communication

etc alongwith wall mounted/ stand mounted cabinet.

(a) Full Bore electromagnetic Flow Meter (Regular Power Operated) 100 mm Dia (PN 1.0 Rating)

Total of Section-(A) Rs.

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

(B) POWER DISTRIBUTION SECTION

Approved make Four Pole LT Heavy Duty Switch Disconnector Fuse Unit Cubical type for panel mounting complete

with operating mechanism suitable to operate on 415V A.C. With HRC fuses of suitable load confirming to IS.

(Part I & III). of following capacities 1 No. 2535.00

(a) 63 Amp Cat-III

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as

14 14 directed of following size. 150 Mts. 136.00

3 core 2.5 Sq. mm - For Both Section From Pump to Panel

SITC of LV MCC panel totally enclosed dust and vermin proof, indoor type, minimum degree of protection- IP 52 as per

IS 2147 operating on 3 ph. 4- wire 415v 50Hz neutral effectively grounded with instrument compartment accomodating

led type indicating lamps, control contactor as per IS 13947, CT of accuracy class -I as per IS 2705 relays, meters &

control MCBs, air insulated electrolitic grade aluminium bus bar for 3 phases and neutral system with incoming braker-

microprocessor based air circuit breakers(electrically operated drawout type)/air break fixed type MCCB with trip free

mechanism, current limit type as per IS 8828, motor contactor(as per type-2 co-ordination), overload relay with built in

single phasing prevention feature and auxiliary feeders as per SLD drawings, momentary contact type push button,

equipment fittings, bus bars, cable boxes, cable glands, incoming/outgoing cable connections for 1100 volt grade al/cu

conductor XLPE/PVC insulated & PVC sheathed armoured cable,10% spare terminals, power wiring using1100 volts

15 15 grade, FRLS insulated copper conductor wires confirming to IS 694 & 8130, cable compartment/alleys of minimum 300 1 Nos. 27373.60

mm size, GI earth bus bar For entire length. MCC shall be fabricated from cold rolled, cold annealed(CRCA) sheet steel

and minimum thickness of various members shall be as follows. Base frame/channel/gland plate-3mm, Load bearing

member/doors-2mm and internal partitions-1.6mm with fixed APP type capacitor bank to improve PF on each outer

feeder with as shown below size as per IS & as per tech. specifications with providing of hour meter for each feeder of

Minimum incommer of 15 KW & Minimum outgoing 7.5 KW - 2 Working Feeder +2 feeder of 32 Amp (SD Starter

with MCCB with Rotary Handle, Contactor, O/L relay, cast resin type CT, Digital MFM, Analog Ammeter, SPP, Timer

etc.)- For Danidhar Hw to Bhavabhi Khijadiya & Bamangam Section

SITC of DOL starter suitable for local & remote pump control application consisting of MPCB, overload relay and

contactors as per Type II coordination including digital voltmeter, analogue ammeter with selector switch, run hour meter,

16 16 required protective relays & control accessories. 2 Nos. 6924.00

D. O. L. - 5 HP Capacity for Toda Section

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia

of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for

following type of applications with chamber and heavy duty cover.(approved make OEM has to submit test certificate) &

having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 • / meter testing as per IEC

17 17 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing 4 Job 4546.00

compound should be capable to retain moisture for long time Necessary test report must be submitted.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded

18 18 wire of green colour for earth continuity of following size (A) With medium class Rigid PVC pipe and accessories with 80 Mtr 111.00

medium class Rigid PVC pipe and accessories.

a. 2 wire 4 sq.mm (with 2.5 sq.mm earth wire)

LIGHTING DISTRIBUTION BOARD:

Providing & Erecting following type of Modular type accessories mounted with PVC/ metallic box, single mounting base

frame covered with textured/ metallic front plate, modules erected with necessary connection as desired by Engineer In

charge. 6 no. 16A single Pole Modular MCB Switch, Cat. II (1 point of pump room inside lights, 4 point of pump room

outside lights, 1 point of celling fan) & 1 No. incomer 40 Amp. DP ELCB/RCCB for lighting & inductive load (C Curve)

having 10kA breaking capacity & confirming to IS

Supplying and erecting LED Street Light (IP-65), surge protection -4KV integral and 10 kv non integral, light must have

20 20 440 VAC line supply protection. It should withstand 48 Hours for 440 VAC line supply with required fittings, connectors, 4 Nos. 4876.00

accessories etc complete. 70 Watt (Cat-II)

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Supplying and erecting R&B approved make of LED Suraface mounted luminaire with rear reflector suitable for office

21 21 and laboratory applications with 22-24 Watt LED (Cat.II) Lamp with all required fittings, connectors, accessories 4 Each 645.00

Providing R&B Ele.

& erecting SOR 2025-26,

Approved Chapter-2,

make Celling Itemdouble

Fan with no. 2-15-3(A-iv),

ball bearing Page 57 with condeser A.C 230v.50 c/s

22 22 1200mm sweep complete ,canopy and 30 cms. Dowen rod erected on existing hook or clamp with 24/0.2 , 3 core flexible 1 Nos. 1581.00

wire with earthing with regulator, modular switch box.(Make shall be approved by Engineer incharge)

Total of Section B Rs.

Total of Section ( A+B ) Rs.

Executive Engineer

P.H.Mechanical Division Jamnagar

Name of Project :- SITC of Pumping Machinery under Kalavad Group RWSS

Name Of Work :- Supply, Installation, Testing & Comissioning of HSCF and SM Pump Sets with Mechanical and Electrical Equipments & Accessories Etc. Complete at

Various Headworks under Kalavad Group RWSS in Ta.- Kalavad, Distt.-Jamnagar.

Head Works :- Bavakhakhariya Boosting Hw

Duty Point :- (1) Bavakhakhariya Hw to Jivapar Village:- 440 LPM X 52 Mtr. Head x 15 HP- ( 2 Set)

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

(A) MECHANICAL EQUIPMENTS SECTION

Supply at site, Storage, Erection, Installation, Testing & Commissioning of Horizontal type Horizontal Monoset Sub

Pump (SM) set 2900/1450 RPM, 3 Phase AC Supply, 50 HZ ± 3%, 415 V ± 10%, following IS 14220 along with

suitable foundation / Installation device with 15 Mtr Power & Control cable of following material of Construction:-

1 1 Casing - C.I. FG 260, Impeller - Bronze & Shaft- SS 410 etc as per detailed specifications & requirement comp. 2 Set 27720.00

(i)Capacity:- SM 2.9:- 440 LPM(7.33 LPS) at 52 Mts. Head with minimum 15 HP motor ratings.

If not possible in horizontal SM pump, then vertical SM pump will be accepted.

Supplying, Installation, Testing & Commissioning in standard length ISI mark high density polyethylene H.D.P.E. Pipes

suitable for potable water as per IS specification no. 4984/1995 including all local and central taxes, transportation,

2 2 freight charges, octroi, inspection charges, loading, unloading, conveyance to dept. stores etc. comp. 100 Mtr 287.10

90 mm Dia HDPE Pipe- 10 kg/cm2- Delivery Pipe

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of GI Pipe conforming to IS-1239 or its

latest revision/ammendment including loading, unloading conveyance to site, stacking etc. all complete.

3 3 100 mm Dia Medium Duty- Common Header Pipe 6 Mtr 950.40

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of M.S. Special Such as Suction Strainer,

4 4 Flanges, Concentric / Eccentric Nozzles, Reducer / Expanders, Bend, Bolts, Nuts,etc. Complete. as per relevent IS 150 Kgs. 105.60

Standard as per site requirement.

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of ISI mark Both End Flanged Hand

Wheel/Cap Operated Sluice Valve as per IS: 14846 (Latest Edition) of Board Approved make to be installed on

DELIVERY/Common Header MS Pipings including cost of all labour, jointing material, including nut bolts as per

5 5 specification & requirement including all taxes, insurance, transportation, freight charges, octroi, inspection charges, 3 No. 4002.00

loading, unloading,conveyance to departmental stores/site, stacking etc. complete.

Size: 100 mm Dia, PN 1.0 - for Delivery & Common Header Pipe

Supply at site, Storage, Erection, Installation, Testing & commissioning of ISI Mark Both End Flanged C.I. Reflux/ Non

return Valve with IS: 5312, of Approved make to be installed on DELIVERY/Common Header MS Pipings

including cost of all labour, jointing material,including nut bolts as per specification & requirement including all taxes,

6 6 insurance, transportation, freight charges, octroi, inspection charges, loading, unloading,conveyance to departmental 3 Nos. 5787.00

stores/site, stacking etc. complete.

Size: 100 mm Dia, PN 1.0 - for Delivery & Common Header Pipe

Supply, installation, testing & commissioning of flange ends Expansion Bellow as per EJMA standards of overall

length of minimum 300 mm, designed for 15 mm axial compression and 5 mm axial extension with tie rods etc. of

following MOC & pressure ratings. MOC: Bellows: SA 240 Gr. 304; Internal Sleeve: SA 240 Gr. 304; Weldends: IS

7 7 2062 Gr. B; Flanges: IS 2062 Gr. B (Drilling as per IS 1538 / IS 6392 ) & Limit Rods & Nuts: CS - IS 1367 1 No. 3420.00

100 mm Dia (PN 1.0 Rating) for Common Header Pipe

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Supply, Installation, Testing, Commissioning of Bourdon Type Pressure Gauge, ±1% accuracy, Direct bottom 1/2"

NPT (M) process connection, IP 67, Glycerine filled, SS304 Case with Bayonet Type Bezel, SS316 L Bourdon Tube,

SS 316 Movement material, Aluminium dial with black graduation on white background, Micro Zero adjustable pointer,

8 8 neoprene gasket, Blow out disc, shatter proof glass, SS tag plate etc as per IS 3624. 3 Nos. 1029.00

(a) 100 mm Dial Size- 0 to 6 Kg/cm2

Total of Section-(A) Rs.

(B) POWER DISTRIBUTION SECTION

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as

9 9 directed of following size. 80 Mts. 187.00

3 core 4 Sq. mm - For Pump to Panel

SITC of LV MCC panel totally enclosed dust and vermin proof, indoor type, minimum degree of protection- IP 52 as

per IS 2147 operating on 3 ph. 4- wire 415v 50Hz neutral effectively grounded with instrument compartment

accomodating led type indicating lamps, control contactor as per IS 13947, CT of accuracy class -I as per IS

relays, meters & control MCBs, air insulated electrolitic grade aluminium bus bar for 3 phases and neutral system with

incoming braker-microprocessor based air circuit breakers(electrically operated drawout type)/air break fixed type

MCCB with trip free mechanism, current limit type as per IS 8828, motor contactor(as per type-2 co-ordination),

overload relay with built in single phasing prevention feature and auxiliary feeders as per SLD drawings, momentary

contact type push button, equipment fittings, bus bars, cable boxes, cable glands, incoming/outgoing cable connections

for 1100 volt grade al/cu conductor XLPE/PVC insulated & PVC sheathed armoured cable,10% spare terminals, power

wiring using1100 volts grade, FRLS insulated copper conductor wires confirming to IS 694 & 8130, cable

compartment/alleys of minimum 300 mm size, GI earth bus bar For entire length. MCC shall be fabricated from cold

rolled, cold annealed(CRCA) sheet steel and minimum thickness of various members shall be as follows. Base

frame/channel/gland plate-3mm, Load bearing member/doors-2mm and internal partitions-1.6mm with fixed APP type

capacitor bank to improve PF on each outer feeder with as shown below size as per IS & as per tech. specifications

with providing of hour meter for each feeder of

Minimum incommer of 22 KW & Minimum outgoing 11 KW - 2 Working Feeder +2 feeder of 32 Amp (SD Starter

with MCCB with Rotary Handle, Contactor, O/L relay, cast resin type CT, Digital MFM, Analog Ammeter, SPP, Timer

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia

of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for

following type of applications with chamber and heavy duty cover.(approved make OEM has to submit test certificate)

& having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 • / meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing

11 11 compound should be capable to retain moisture for long time Necessary test report must be submitted. 2 Job 4546.00

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Rate as per R&B Ele. SOR 2025-26, Chapter-3, Item no. 3-14-9(a), Page

Providing & erecting Approved make Celling Fan with double ball bearing ISI mark with condeser A.C 230v.50 c/s

1200mm sweep complete ,canopy and 30 cms. Dowen rod erected on existing hook or clamp with 24/0.2 , 3 core

12 12 flexible wire with earthing with regulator, modular switch box.(Make shall be approved by Engineer incharge) 2 Nos. 1581.00

Total of Section B Rs.

Total of Section ( A+B ) Rs.

Executive Engineer

P.H.Mechanical Division Jamnagar

Name of Project :- SITC of Pumping Machinery under Kalavad Group RWSS

Name Of Work :- Supply, Installation, Testing & Comissioning of HSCF and SM Pump Sets with Mechanical and Electrical Equipments & Accessories Etc. Complete at

Various Headworks under Kalavad Group RWSS in Ta.- Kalavad, Distt.-Jamnagar.

Head Works :- Sursangda Boosting Hw

Duty Point :- (1) Sursangda Boosting Hw :- 440 LPM X 30 Mtr. Head x 10 HP- ( 2 Set)

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

(A) MECHANICAL EQUIPMENTS SECTION

Supply at site, Storage, Erection, Installation, Testing & Commissioning of Horizontal type Horizontal Monoset Sub

Pump (SM) set 2900/1450 RPM, 3 Phase AC Supply, 50 HZ ± 3%, 415 V ± 10%, following IS 14220 along with

suitable foundation / Installation device with 15 Mtr Power & Control cable of following material of Construction:-

1 1 Casing - C.I. FG 260, Impeller - Bronze & Shaft- SS 410 etc as per detailed specifications & requirement comp. 2 Set 20433.60

(i) Capacity:- 440 LPM(7.33 LPS) at 30 Mts. Head with minimum 10 HP motor ratings.

If not possible in horizontal SM pump, then vertical SM pump will be accepted.

Supplying, Installation, Testing & Commissioning in standard length ISI mark high density polyethylene H.D.P.E. Pipes

suitable for potable water as per IS specification no. 4984/1995 including all local and central taxes, transportation,

2 2 freight charges, octroi, inspection charges, loading, unloading, conveyance to dept. stores etc. comp. 100 Mtr 287.10

90 mm Dia HDPE Pipe- 10 kg/cm2- Delivery Pipe

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of GI Pipe conforming to IS-1239 or its

latest revision/ammendment including loading, unloading conveyance to site, stacking etc. all complete.

3 3 100 mm Dia Medium Duty- Common Header Pipe 6 Mtr 950.40

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of M.S. Special Such as Suction Strainer,

4 4 Flanges, Concentric / Eccentric Nozzles, Reducer / Expanders, Bend, Bolts, Nuts,etc. Complete. as per relevent IS 150 Kgs. 105.60

Standard as per site requirement.

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of ISI mark Both End Flanged Hand

Wheel/Cap Operated Sluice Valve as per IS: 14846 (Latest Edition) of Board Approved make to be installed on

DELIVERY/Common Header MS Pipings including cost of all labour, jointing material, including nut bolts as per

5 5 specification & requirement including all taxes, insurance, transportation, freight charges, octroi, inspection charges, 3 No. 4002.00

loading, unloading,conveyance to departmental stores/site, stacking etc. complete.

Size: 100 mm Dia, PN 1.0 - for Delivery & Common Header Pipe

Supply at site, Storage, Erection, Installation, Testing & commissioning of ISI Mark Both End Flanged C.I. Reflux/ Non

return Valve with IS: 5312, of Approved make to be installed on DELIVERY/Common Header MS Pipings

including cost of all labour, jointing material,including nut bolts as per specification & requirement including all taxes,

6 6 insurance, transportation, freight charges, octroi, inspection charges, loading, unloading,conveyance to departmental 3 Nos. 5787.00

stores/site, stacking etc. complete.

Size: 100 mm Dia, PN 1.0 - for Delivery & Common Header Pipe

Supply, installation, testing & commissioning of flange ends Expansion Bellow as per EJMA standards of overall

length of minimum 300 mm, designed for 15 mm axial compression and 5 mm axial extension with tie rods etc. of

following MOC & pressure ratings. MOC: Bellows: SA 240 Gr. 304; Internal Sleeve: SA 240 Gr. 304; Weldends: IS

2062 Gr. B; Flanges: IS 2062 Gr. B (Drilling as per IS 1538 / IS 6392 ) & Limit Rods & Nuts: CS - IS 1367 1 No. 3420.00

100 mm Dia (PN 1.0 Rating) for Common Header Pipe

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Supply, Installation, Testing, Commissioning of Bourdon Type Pressure Gauge, ±1% accuracy, Direct bottom 1/2"

NPT (M) process connection, IP 67, Glycerine filled, SS304 Case with Bayonet Type Bezel, SS316 L Bourdon Tube,

SS 316 Movement material, Aluminium dial with black graduation on white background, Micro Zero adjustable pointer,

8 8 neoprene gasket, Blow out disc, shatter proof glass, SS tag plate etc as per IS 3624. 3 Nos. 1029.00

(a) 100 mm Dial Size- 0 to 6 Kg/cm2

Total of Section-(A) Rs.

(B) POWER DISTRIBUTION SECTION

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as

9 9 directed of following size. 100 Mts. 136.00

3 core 2.5 Sq. mm - For Pump to Panel

SITC of Star Delta starter suitable for local & remote pump control application consisting of MPCB, overload relay and

contactors as per Type II coordination including digital voltmeter, analogue ammeter with selector switch, run hour

meter, required protective relays & control accessories. 2 Nos. 9128.00

S.D. - 10 HP Capacity for Toda Section

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia

of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for

following type of applications with chamber and heavy duty cover.(approved make OEM has to submit test certificate)

& having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 • / meter testing as per IEC

11 11 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing 2 Job 4546.00

compound should be capable to retain moisture for long time Necessary test report must be submitted.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Providing & erecting Approved make Celling Fan with double ball bearing ISI mark with condeser A.C 230v.50 c/s

1200mm sweep complete ,canopy and 30 cms. Dowen rod erected on existing hook or clamp with 24/0.2 , 3 core

flexible wire with earthing with regulator, modular switch box.(Make shall be approved by Engineer incharge)

Total of Section B Rs.

Total of Section ( A+B ) Rs.

Executive Engineer

P.H.Mechanical Division Jamnagar

Name of Project :- SITC of Pumping Machinery under Kalavad Group RWSS

Name Of Work :- Supply, Installation, Testing & Comissioning of HSCF and SM Pump Sets with Mechanical and Electrical Equipments & Accessories Etc.

Complete at Various Headworks under Kalavad Group RWSS in Ta.- Kalavad, Distt.-Jamnagar.

Head Works :- All Boosting Hw (Juvanpar Boosting Hw, Deri Boosting Hw, Bavakhakhariya Boosting Hw, Morvadi Boosting Hw & Motivavdi

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

(A) MECHANICAL EQUIPMENTS SECTION

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of MS Pipe conforming to IS-3589-2001

or its latest revision/ammendment including loading, unloading conveyance to site, stacking etc. all

1 1.1 complete. 18 Mtr 1852.40

Pipe dia in OD- 219.1 mm, Thickness- 4.5 mm (for Common Header Pipe- For Juvanpar Boosting Hw, Deri

Boosting Hw & Morvadi Boosting Hw)

Pipe dia in OD- 273 mm, Thickness- 5.0 mm (for Common Header Pipe- For Bavakhakhariya Boosting Hw

& Motivavdi Boosting Hw)

1.3 Pipe dia in OD- 168.3 mm, Thickness- 4.5 mm (for Delivery Pipe- All Boosting Hw) 80 Mtr 1413.50

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of GI Pipe conforming to IS-1239 or its

2 2 latest revision/ammendment including loading, unloading conveyance to site, stacking etc. all complete. 30 Mtr 657.80

80 mm Dia Medium Duty- (for By Pass Pipe- All Boosting Hw)

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of M.S. Special Such as Suction Strainer,

Flanges, Concentric / Eccentric Nozzles, Reducer / Expanders, Bend, Bolts, Nuts,etc. Complete. as per relevent IS

For 168.3 mm OD, 219.1 mm OD, 273 mm OD & 80 mm dia Pipe

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Supply at Site, Storage, Erection, Installation, Testing & Commissioning of ISI mark Both End Flanged Butterfly

Valve as per IS 13095 (Latest Edition) with sleeve of EPDM & disc, shaft & internal partsof SS-410, of Board

Approved make to be installed on Suction MS Pipings including cost of all labour, jointing material, including nut bolts

as per specification & requirement including all taxes, insurance, transportation, freight charges, octroi, inspection

charges, loading, unloading,conveyance to departmental stores/site, stacking etc. complete.

(i) 150 mm Dia (PN 1.0 Rating) for Delivery Pipe- All Boosting Hw

(ii) 200 mm Dia (PN 1.0 Rating) for Common Header Pipe- For Juvanpar Boosting Hw, Deri Boosting Hw &

Morvadi Boosting Hw

(ii) 250 mm Dia (PN 1.0 Rating) for Common Header Pipe- For Bavakhakhariya Boosting Hw & Motivavdi

Supply at site, Storage, Erection, Installation, Testing & commissioning of ISI Mark Both End Flanged Swing

Plate Type Dual Plate Check Valve of Approved make to be installed on DELIVERY MS Pipings including cost of

all labour, jointing material,including nut bolts as per specification & requirement including all taxes, insurance,

transportation, freight charges, octroi, inspection charges, loading, unloading,conveyance to departmental

stores/site, stacking etc. complete.

(i) 150 mm Dia (PN 1.0 Rating) for Delivery Pipe- All Boosting Hw

(ii) 200 mm Dia (PN 1.0 Rating) for Common Header Pipe- For Juvanpar Boosting Hw, Deri Boosting Hw &

Morvadi Boosting Hw

(ii) 250 mm Dia (PN 1.0 Rating) for Common Header Pipe- For Bavakhakhariya Boosting Hw & Motivavdi

Supply, installation, testing & commissioning of flange ends Expansion Bellow as per EJMA standards of overall

length of minimum 300 mm, designed for 15 mm axial compression and 5 mm axial extension with tie rods etc. of

6 6.1 following MOC & pressure ratings. MOC: Bellows: SA 240 Gr. 304; Internal Sleeve: SA 240 Gr. 304; Weldends: IS 10 No. 4656.00

2062 Gr. B; Flanges: IS 2062 Gr. B (Drilling as per IS 1538 / IS 6392 ) & Limit Rods & Nuts: CS - IS

(i) 150 mm Dia (PN 1.0 Rating) for Delivery Pipe- All Boosting Hw

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

(ii) 200 mm Dia (PN 1.0 Rating) for Common Header Pipe & Flowmeter- For Juvanpar Boosting Hw, Deri

Boosting Hw & Morvadi Boosting Hw

(iii) 250 mm Dia (PN 1.0 Rating) for Common Header Pipe & flowmeter- For Bavakhakhariya Boosting Hw

& Motivavdi Boosting Hw

Supply, Installation, Testing, Commissioning of Bourdon Type Pressure Gauge, ±1% accuracy, Direct bottom

1/2" NPT (M) process connection, IP 67, Glycerine filled, SS304 Case with Bayonet Type Bezel, SS316 L Bourdon

7 7 Tube, SS 316 Movement material, Aluminium dial with black graduation on white background, Micro Zero adjustable 15 Nos. 1029.00

pointer, neoprene gasket, Blow out disc, shatter proof glass, SS tag plate etc as per IS

(a) 100 mm Dial Size- 0 to 6 Kg/cm2- For All Boosting Hw

Chain Pulley Block (Manually Operated) :

8 8.1 Providing and erecting chain pulley block with triple gear arrangement, lifting hook, load chain and hand chain and 1 No. 14400.00

locking device with spur gear travelling trolley and all accessories.- Capacity: 1 Tons- For Juvanpar Hw

Chain Pulley Block (Manually Operated) :

8.1 Capacity: 2 Tons- For Deri Boosting Hw, Bavakhakhariya Boosting Hw, Morvadi Boosting Hw & 4 No. 17400.00

Motivavdi Boosting Hw

SITC of suitable size ISMB I Beam girder, MS Channel, MS Angle, etc. required for minimum 1 Ton capacity loading

9 9 / unloading / lifting / lowering for making a structure suitable for installation of chain pulley block so as to removable 3500 KG 76.19

of the pump set for opeation and maintainace purposes to directly to load the same into the truck / pickup van, etc.

complete.- For All Boosting hw

Providing & Laying Reinforced Cement Concrete in Thrust Block/Piping/Valves Supports etc. with Tar steel,

10 10 Black Trap Kapchi as Coarse Aggreate for Raft,Grillage Footing with Necessary Centering Form work, 5 Cu. Mtr. 8566.00

Consolidating as per Directive in 1:2:4 Ratio comp. as per site requriement

Total of Section-(A) Rs.

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

(B) POWER DISTRIBUTION SECTION

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of

35 KA. at 415 V. having normal current rating 125A. with Fixed thermal & magnetic release suitable to work on

11 11 A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. 5 No. 7976.00

ICU=100% of ICS only of Cat-III

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-

in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection

terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber and heavy duty cover.(approved make OEM has

to submit test certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:-

• / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C)

Back fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary test report

must be submitted.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

13 13 insulated stranded wire of green colour for earth continuity of following size (A) With medium class Rigid PVC pipe 80 Mtr 111.00

and accessories with medium class Rigid PVC pipe and accessories.

a. 2 wire 4 sq.mm (with 2.5 sq.mm earth wire)

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

LIGHTING DISTRIBUTION BOARD:

Providing & Erecting following type of Modular type accessories mounted with PVC/ metallic box, single mounting

base frame covered with textured/ metallic front plate, modules erected with necessary connection as desired by

Engineer In charge. 4 no. 16A single Pole Modular MCB Switch, Cat. II (1 point of pump room inside lights,

point of pump room outside lights, 1 point of celling fan) & 1 No. incomer 40 Amp. DP ELCB/RCCB for lighting &

inductive load (C Curve) having 10kA breaking capacity & confirming to IS

Description of Item Qty Unit Rate (Rs.) Amount (Rs.)

Supplying and erecting LED Street Light (IP-65), surge protection -4KV integral and 10 kv non integral, light must

15 15 have 440 VAC line supply protection. It should withstand 48 Hours for 440 VAC line supply with required fittings, 10 Nos. 4876.00

connectors, accessories etc complete. 70 Watt (Cat-II)

Supplying and erecting R&B approved make of LED Suraface mounted luminaire with rear reflector suitable for

16 16 office and laboratory applications with 22-24 Watt LED (Cat.II) Lamp with all required fittings, connectors, 5 Each 645.00

accessories complete.

Providing & erecting Approved make Celling Fan with double ball bearing ISI mark with condeser A.C 230v.50 c/s

17 17 1200mm sweep complete ,canopy and 30 cms. Dowen rod erected on existing hook or clamp with 24/0.2 , 3 core 5 Nos. 1581.00

flexible wire with earthing with regulator, modular switch box.(Make shall be approved by Engineer incharge)

Total of Section B Rs.

Total of Section ( A+B ) Rs.

Executive Engineer

P. H. Mechanical Division Jamnagar