Supply of furniture office furniture and 3 seater benches to Achyutham block at Tirupati furniture Part - C

Supply and Fixing of Executive Chair: with Neck support :HEADREST: fixed head rest made with PU moulded reczin upholstry. BACK: Made of moulded ply with PU moulded foam with fiber sheet with reczin upholstery. SEAT: Ply based PU moulded foam with recsin covering. ARMS: Fixed aluminium arms with pu pad. MECHANISM: Knee tilt mechanism with height adjustable range of 18-22inches. BASE:Aluminium base with nylon casters., outer to outer sizes:Size:1150(Ht)X630(W = arm to arm) X550(D),with tolerance (+/- 10mm).The cost of item includes cost and conveyance of all the materials including transportation to work site Tirupati. (Excluding cost of GST).

Supply & fixing of Executive table overall (Outer to outer) SIZE: Main table: 1800mm (L) x 900mm (D) x 750mm (H). Separate side table dimensions (outer to outer): 1200mm (L) x 450 mm (D)x 650(H) mm with storage consisiting of three doors. Table top: Made with 25mm thick BWP/ BWR grade plywood and 18mm plywood strip with look wise outer thickness 43mm,with BWP/BWR grade plywood body. Legs and modesty panel: Fabricated out of 18mm thick BWP/BWR grade plywood duly edge binding with 2mm thick PVC binding, mobile pedestal of size(outer to outer): 440mm x 510mm x 630mm H having two sides drawers with central locking system fabricated out of 18mm thick and 9mm thick BWP/BWR grade plywood duly edge binding with PVC beading and provided with handle, Lock along with key board tray and CPU trolly. The rate is inclusive of all taxes and other incidental charges etc., complete (Exclusive of GST)

Supply of office table with over all size 1370 mm (W) x 680 mm (D) x 735 mm (H) mm following specifications fabricated out of mild steel 1 mm thickness CR sheet having 3 drawers on right side mounted on circular tube of 25 4 mm dia, 1.2 mm thick tubular frame duly painted after necessary treatment and provided with good qua!ifi/ lock. The leg rest and the tubular frame bending curvature as similar in the Godrej T8 table. Top: Fabricated out of 19 mm thcik ply wood with post form edges with 1mm thick flex high pressure laminates. Table top colour silver grey. The rate is inclusive of all taxes and incidental charges etc., complete (Excluding of GST)

Supply of Mid back chair : BACK: Made of nylon frame with nylon mesh upholstery with adjustable lumber support SEAT: Ply based PU moulded foam with fabric mesh covering with ABS seat outer ARMS: Height adjustable arms with PU pad covering, MECHANISM: Tilt mechanism with height adjustable range of 18-22inches BASE: Nylon base with caster wheeIs,OveraIl Size:W 670 mm x D670 mm x H960 mm Note: The variations in dimensions up to + or - 10 mm over all specified sizes are admissible. The rate is including all incidental charges etc., complete as directed during execution. (Exclusive of GST)

Supply of computer table, the table shall be useful for placing a desktop computer with its CPU, Monitor and keyboard, and a footrest shall be provided with it. The design requirements shall be as per market standards. The dimensions of the computer table are typically 1200 x 600 x 730 mm with one drawer, locker, Keyboards tray. The frame work of the table shall be made of 18mm thick BWP grade plywood and should be mounted on a steel structure fabricated out of 2" x 1" sq tubular secNons duly painted in dul black color aRer necessary treatment. The table top shall be made of 18mm thick BWP grade plywood. The drawers, foot rest, and the keyboard tray shall be made of 18mm thick BWP grade plywood, all the exposed edges are banded with 2mm thick PVC beading of matching colour. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST) Note:1.To be designed as per TTD requirement before final supply of products. 2.The sample for all items should be got approved by the department before supplying. 3.The TTD will not provide C or D forms and the tender has quoted the quote accordingly. 4.The supplier/tenderer have to bear the testing charges of the quality control test conducted in any reputed laboratory when the department insists

Supply of co-polymer poly propylene Plastic moulded chairs with arms confirming to IS 13713:1993 specifications and not less than the following physical parameters.(a) Seat height from floor level measured at centre 430 mm.(b) Seat width and depth at middle place are 410 mm & 420 mm respectively. (c) Back rest width and height 285 turn & 390 mm respectively. (d) Total weight of plastic chair is 2.58 kgs. The cost of item includes cost and conveyance of all the materials including transportation to work site Tirupati (Excluding cost of GST). NOTE: (1) The height of the seat should be measured at front side (2) The measurements are to be taken up along the profile (3) The measurements are to be taken up at mid points (4) The height of back rest should be measured from seat top at centre

Supply of Multi Seater Benches (Grey or silver colour chairs for patients perforated (3 seater Perforated 3 seater visitor chairs with arms) Overall size of 5.5 feet (L) x 2 (D) feet . Seat and back made with perforated CR sheet of 18 gauge 'Beam with 2.5inch x1.5 inch rectangle CR pipe of 18 gauge . Powder coated . Backrest specifications: 18" x 18" . Seat Specifications :18" x 18" . Beam with 2.5 inch x 1.5 inch rectangle CR pipe of 18 gauge and bottom of the multi seater extra two support angles also required. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST)

Supply of Coffee table /Teapoy of size 35" X 21" X 24“ Structure: Suitable frame structure with teak wood using 1.5" x 1.5" with standard designs and shapes Top shal be of 9PIy- 15mm thick Plywood of (IS:303) BWR/BWP Grade and fixed with laminate and bottom 9PIy- 12mm thick Plywood of (IS 303) BWR/BWP Grade. The backside portion shall be applied with zinc primer. Finishing: Laminate SheetsMatFinish 1mmthick with machine edge binding and without leaving any hollow spaces to prevent entry of termites, borers, and pests etc., in all joints. The rate is inclusive of all taxes and other incidental charges, conveyance to works site, fixing charges etc , complete but exclusive of GST. The model and design as finalized by the Engineer-in-charge." (Excluding GST)