PROVISION OF SECURITY WALL BEHIND NKG AND SPECIAL REPAIRS TO SAFETY GUARD RAILS/RAILINGS OF BUILDING NO. P-146,P-201 AND P-217 AT INS DRONACHARYA

Amount

Excavation in trenches, not exceeding 1.5 m deep and not exceeding 1.5 m in wide and getting out in soft/loose soil etc complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5 m wide and exceeding 1.5 m but not exceeding 3.00 m in depth for foundation etc and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil etc.complete all as specified and as directed.

Removal of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point etc. complete all as specified and as directed.

M&L for plain cement concrete 1:4:8, nominal mix, type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete, using necessary form work all as specified & directed. Note : Unit rate included for use of formwork.

M&L RCC M-30 (design mix), using crushed stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc., basement slabs, under-reamed piles and mass concrete and the like complete all as specified and directed (reinforcement shall be measured and paid for separately).

M & L RCC M-30(Design mix) using crushed stone aggregate as in coloumns, pillars etc complete all as specified and directed (reinforcement shall be measured and paid for separately).

M&L RCC M-30(Design mix) using crushed stone aggregate as in beams, lintels over 1.5 metre span and the like complete all as specified and directed (reinforcement shall be measured and paid for separately).

M&L formwork to sides of concrete foundations, footings,sides and soffits of plinth beams and similar work all etc.to give rough finish to flat surfaces complete all as specified and directed.

M&L formwork to sides of pillars posts,struts,columns and similar work fair finished surface etc to give rough finish to flat surfaces complete all as specified and directed.

M&L formwork to sides and soffits floor or roof beams lintels, cantilevers,coping and similar type work fair finished surface etc to give rough finish to flat surfaces complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia etc.complete all as specified and as directed.

-Ditto- all as per Item No 12 here in above, but 5mm dia and over upto and including 10mm dia in stirrups,etc.complete all as specified and as directed.

M&L PCC 1:2:4 type B1 (20mm graded aggregate) as in copings,water troughs and the like including weathering,slightly rounded,chamfered angles and throating as directed. Note : (i) The unit rate include for use of form work (straight or curved). (ii) Reinforcement if any shall be measured and paid separately.

Pre-cast cement concrete block masonary with solid blocks, exceeding 10cm in width and setting in cement mortar 1:6 type C1 1:3:6(20mm graded aggregate) complete all as specified and as directed.

M&L for rendering plaster in CM 1:4, 15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement etc. complete all as specified and as directed.

M&L for two coats of Antifungal paint (Apex ultima Protek of Asian paint or Equivalent or equivalent in approved Makes) over a coat of Exterior primer (Proffesional pack of Asian paints) over a coat of external wall care putty not exceeding 2 mm thick on new or old prepared plastered external surfaces and including scafoldings and cradles including hoisting and lowering as required with bracing,support etc.complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L 20 mm thick screed bedding layers in cement mortar 1:4 for laying concrete tiles in stairs, and other similar works complete all as specified and as directed.

M&L for Chequered cement concrete tiles 20cm x20cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors with white cement and pigment complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F Stainless steel grills/railings fixed to walls/floors of Grade -316 including all pieces,drilling holes,swelling,buffing,welding complete all as specified and as directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for cement concrete 1:2:4 Type B0 (12.5mm graded aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified & directed.

M&L for rendering cement plaster 15mm thick in two coats(10 mm thick in cement mortar 1:4 and 5mm thick in cement mortar 1:4 mixed with water proofing compound ) on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid seperately.

Supply only liquid water proofing admixture complete all as specified & directed.

Anaswara Constructions

ZOOM ENTERPRISES