Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.8 CrAdmitted-Finance | ₹3.8 Cr | L1 | Admitted-Finance |
| 2 | L2₹4.0 Cr+₹22.0 L (5.79%)Admitted-Finance BANSAL COTTAGE BADRI NAGAR TEH PAONTA SAHIB SIRMAUR | SIRMAUR | HIMACHAL PRADESH | 173025 | ₹4.0 Cr+₹22.0 L (5.79%) | L2 | Admitted-Finance |
| 3 | L3₹4.2 Cr+₹39.4 L (10.4%)Admitted-Finance | ₹4.2 Cr+₹39.4 L (10.4%) | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | ARVIND KUMAR BANSAL L1 | H. C. Bansal Engg. & Contt. L2 | Vidya Infrastructure and Developers L3 |
|---|---|---|---|---|---|---|
| 1.00Excavation in Foundation | ||||||
| 1.01 | Excavation in Foundation, trenches etc in earth work in all kinds of soil such as pick work, jumper work and chiselling/wedging out of hard or soft rock where blasting is prohibited up to all depths stacking the excavated soil not more than 3 metres clear from the edge of excavation and then returning the stacked soil in 15cms layers when required into plinths , side of foundation etc consolidating each deposited layer by ramming and watering and then disposing off all surplus excavated earth as directed by the Engineer-in charge | 694.34 | Per Cum | - | - | - |
| 2.00 | Filling in Plinth with sand under floors including watering , ramming, consolidating and dressing complete with cost of sand including carriage of material in all leads and lifts | 77.01 | Per Cum | - | - | - |
| 3.00Providing form work with steel plates 3.15 mm thick welded with angle iron in fram e 30*30*5mm, so as to give a fair finish including centering, shuttering , strutting and propping etc with wooden battens and ballies , height of propping and centring below supporting floor to ceiling in all heights and removal of the same in situ reinforced concrete and plain concrete work including carriage of material in all leads and lifts | ||||||
| 3.01 | Foundation, footing basis if columns etc amd mass concrete | 69.56 | Per Sqm | - | - | - |
| 3.02 | Flat surfaces such as soffits of suspended floors, roofs , landings and the like floor etc upto 200mm in thickness. | 3,116.28 | Per Sqm | - | - | - |
| 3.03 | Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses,plinth and string courses and the like. | 2,041.11 | Per Sqm | - | - | - |
| 3.04 | Beams, catilevers, girders and lintels sides, soffits of beams, beam haunchings , cantilevers, bresummers and lintels not exceeding 1.0 mtr in depth in all heights from floor. | 2,082.98 | Per Sqm | - | - | - |
| 3.05 | Columns, pillars, posts and struts square, rectanagular or polygonal in plan. | 834.75 | Per Sqm | - | - | - |
| 3.06 | Stair cases with sloping or stepped soffits excluding landing | 47.75 | Per Sqm | - | - | - |
Tender Value
₹3.2 Cr
EMD Value
₹3.6 L
Closing Date
3 Oct 2020, 5:00 pmClosed
Executive Officer
Municipal Council Nahan
Construction of Office Complex building with parking at M.C. Nahan ,Distt. SIRMOUR (H.P.) ( Sub Head CO Four Storey Building of M.C.)
2020_UDDHP_40431_1
MCNAHAN/BUILDING/1
Open Tender
Civil Works - Buildings
Item Rate
270 days
Nahan
As per DNIT , Form 6 and 8
3 documents required · 3 mandatory
₹5,900
Executive Officer
₹3.6 L
7 Oct 2020
10 Sept 2020
5 Oct 2020
10 Sept 2020
3 Oct 2020
10 Sept 2020
Amount
Excavation in Foundation
Excavation in Foundation, trenches etc in earth work in all kinds of soil such as pick work, jumper work and chiselling/wedging out of hard or soft rock where blasting is prohibited up to all depths stacking the excavated soil not more than 3 metres clear from the edge of excavation and then returning the stacked soil in 15cms layers when required into plinths , side of foundation etc consolidating each deposited layer by ramming and watering and then disposing off all surplus excavated earth as directed by the Engineer-in charge
Filling in Plinth with sand under floors including watering , ramming, consolidating and dressing complete with cost of sand including carriage of material in all leads and lifts
Providing form work with steel plates 3.15 mm thick welded with angle iron in fram e 30*30*5mm, so as to give a fair finish including centering, shuttering , strutting and propping etc with wooden battens and ballies , height of propping and centring below supporting floor to ceiling in all heights and removal of the same in situ reinforced concrete and plain concrete work including carriage of material in all leads and lifts
Foundation, footing basis if columns etc amd mass concrete
Flat surfaces such as soffits of suspended floors, roofs , landings and the like floor etc upto 200mm in thickness.
Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses,plinth and string courses and the like.
Beams, catilevers, girders and lintels sides, soffits of beams, beam haunchings , cantilevers, bresummers and lintels not exceeding 1.0 mtr in depth in all heights from floor.
Columns, pillars, posts and struts square, rectanagular or polygonal in plan.
Stair cases with sloping or stepped soffits excluding landing
Edges of slabs and breaks in floors and walls under 20 cm wide.
Providing and Laying cement concrete 1: 6:12 ( One cement : six sand : 12 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of material in all leads and lifts
Providing and Laying cement concrete 1: 4:8 ( One cement : four sand : 8 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of material in all leads and lifts
Provding and Laying cement concrete having strength M-20 mixed design aggregate mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of material in all leads and lifts
Foundation footing basis of columns and the like and mass concrete
Suspended Floors, roofs, landings and shelves and their supports , balconies , beams , girders, bresummers and cantilevers in all heights
Walls(any thickness but not less than 0.10 metre thickness) including attached plasters buttresses , plinth and string courses etc from top of foundation upto all floor level
Columns, pillars , posts , struts upto all heights
Stair cases (except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing upto all heights
Providing & laying cement concrete having strength of M-20 design mixed aggregate mechanically mixed and vibrated for reinforced concrete in chajjas upto any thickness upto all heights i/c finishing the exposed surfaces with cement mortar 1:3 (1 cement : 3 sand) to give a smooth and even surface, centering/form work and curing complete excluding cost of reinforcement including carriage of material in all leads and lifts.
Providing and laying cinder filling in depressed portion in slab in proportion 1:15 (1cement :15 cinder of 12.5 mmnominal size) including ramming, watering and consolidating complete as per direction of the Engineer-in-charge inclluding carriage of material in all leads and lifts.
Providing Tor steel /TMT Steel reinforcement for R.C.C. work including bending, binding and placing in position complete including cost of binding wire upto all heights including carriage of material in all leads and lifts.
Applying cement slurry on R.C.C . slab or cement concrete work using 2.75 kg of cement per sqm. of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete including carriage of material in all leads and lifts.
Providing throating, or plaster drip and moulding to RCC chajjas etc. including carriage of material in all leads & lifts.
Brick work using 2nd class common burnt clay building bricks in superstructure in cement mortar 1:6 (1 cement : 6 sand) including carriage of material in all leads and lifts.
Half brick masonry using 2nd class common burnt clay building bricks in superstructure above plinth level upto all heights in cement mortar 1:4 (1 cement: 4 sand) including carriage of material in all leads and lifts.
Providing and fixing Powder coated in aluminium door, window,ventilator shutters, frames ,glazing i/c glass panes and both sides limited board for doors/partition etc with PVC/neoprens gasket etc.complete as per the architectural drawings and the directions of Engineer-In_charge . Aluminum FRAME OF DOOR AND WINDOW ETC. i/c Handles , Tower bolts, locks complete in all respect. ( Market rates)
Providing and fixing Aluminium Grill fixing wuth screws complete in all respect. ( market Rates)
Providing & fixing Hydorlic Door Closer. with necessary screws including carriage of material in all
Providing and fixing floor door spring stopper with rubber cushion screws etc. complete including carriage of material in all leads & lifts.
P/F bright C.P.finished brass 100mm mortice latch and lock and a pair of levers,handles with necessary screws etc. complete (Indian make of approved quality)
Providing and laying Duro stone vetrified tiles (any size ) 10mm thick in grey /coloured or of approved shade of NITCO, NTC, GICO in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1cement:3sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including cost of tiles where required to be cut including carriage of material in all leads & lifts.
Providing and laying Duro stone vetrified tiles (any size ) 8mm thick in grey/coloured or of approved shade of NITCO, NTC, GICO in skirting, riser of step and dado on 12mm thick cement mortar 1:3 (1cement:3sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including cost of tiles where required to be cut including carriage of material in all leads & lifts.
Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour of NITCO, NTC, GICO in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including cost of tiles where required to be cut i/c carriage of material in all leads & lifts.
Providing & fixing glazed tiles 6mm thick of any size and any colour as per sample approved by the Engineer-in-Charge i/c cost for cutting the tiles where required in skirting, risers of steps and dado upto all height on 12mm thick cement mortar 1:3 (1cement:3 sand) & jointed with cement slurry i/c carriage of material in all leads and lifts.
Kota stone slab flooring 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete.i/c carriage of material in all leads & lifts.
Kota stone slab 25 mm thick single piece in risers of steps,skirting dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete including carriage of material in all leads & lifts.
Providing & laying granite stone (close grained rounded at edge)in flooring 20mm (average) thickness base of cement mortar 1:3 (1 cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing & polishing complete 20mm thick including carriage of material in all leads & lifts.
Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete i/c clamps where ever required & including carriage of material in all leads & lifts. (a) 150mm dia pipes
Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete i/c carriage of material in all leads and lifts.
PVC Plain Bend 150 mm diameter
PVC Plain shoe 150mm diameter.
Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. pipes embeded in and including cement concrete blocks 10x10x10cm.of 1:2:4 mix (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and cost of cutting holes and making good the wall etc. 100mm diametres for C.I. pipe including carriage of material in all leads & lifts.
Steel work welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of red lead paint including carriage of material in all leads and lifts: -
In gratings framed guard bars, ladders, railling, brackets and similar works i/c making holes & filling the same with cement concrete 1:2:4 (1 cement:2 sand 4 graded stone aggregate 20mm nominal size).
Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including carriage of material in all leads and lifts. (a)Enamel paint other than white or white paint.
Applying Birla JK white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of material in all leads & lifts. (i) In Wall /ceiling surface.
Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of material in all leads & lifts. (i) In Wall /ceiling surface..
6mm cement plaster to ceiling in cement mortar 1:3 (1cement :3sand) including carriage of material in all leads & lifts.
15 mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all heights including arises, Internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 ( 1 cement : 6 sand) including carriage of material in all leads and lifts.
20 mm cement plaster in single coat on rough side of brick / stone masonry for interior plastering upto all heights including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 (1 cement : 6 sand) including carriage of material in all leads and lifts.
Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces/ ceiling or sloping surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth including
On Wall.
On Ceiling.
Providing and laying heavy duty precast cement conrete interlocking block pavements having thickness 80mm as per draings and Technical specification clause 1504 ( sub-base of concrete floor to be paid for separtely) 80mm thick interlocking blocks.
Supplying and fixing rolling shutters of approved make made of 80 mm X 1.25mm M.S laths interlocked together through their entire length and joined together at the end by end locks mounted on specially designed pipe shaft,with brackets side guides and arrangements for inside and outside locking with push pull operation complete but excluding the cost of the top cover and spring. Shutters having width below 3.5 metres.
Providing and fixing 27.5 centimetre long wire spring grade No.2 for rolling shutters.
Providing and fixing top cover for rolling shutters. Shutters having width bolow 3.5 metre.
Providing and injecting chemical emulsion for pre-constructional anti termite treatment and creating a contineous chemical barrier under and alround the column pits, wall trenches, junction of wall and floor along the external perimetre of the building expansion joints, surroundings of pipes and conduits etc. and all wood item . complete (Plinth area of the building at ground floor only shall be measured) for payment with chlorpyriphos 50% EC for pre construction and anti termite in buildings. The chemicalis to be used as ( 1part of chlorpyriphous 50% EC with 49 parts of water). The work will be carried out to the satisfaction of Engineer in charge of the site in stage I to Stage IV.
Providing and laying integral cement based water proofing treatment (COBA) including preparation of surface as required for treatment of roofs, balconies , terraces etc. consisting of following operations:- Sheet Attached.
Providing and laying cement concrete 1:2:4 (1 cement :2sand :4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of centering and shuttering in foundation and plinth for Reating/ Breast walls
Excavation in foundations, trenches etc. in earth work in all kinds of soils such as pick work, jumper work, blasting work and chiselling / wedging out of hard or soft rock up to all depths stacking the excavated soil not more than 3 meteres clear from the edge of excavation and then returning the stacked soil in 15 cms layers, when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing off all surplus excavated earth as directed by the Engineer-in- charge.
Excavation in earth work in all kinds of soil such as pick work,jumper work, including chiselling/wedging out of hard or soft rock where blasting is prohibited and disposal of all excavated earth in all leads and lifts through mechanical transportations, disposed earth to be levelled and neatly dressed as directed by Engineer-in-charge.
Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall including carriage of material in all leads & lifts. 15 mm nominal bore
Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall including carriage of material in all leads & lifts. 20 mm nominal bore
Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40 mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of material in all leads and lifts: (JINDAL/ TATA MAKE).
Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1cement : 1 sand) (Seat and over to be measured and paid for separately) including carriage of material in all leads and lifts. Ordinary Closet
Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1cement : 1 sand) (Seat and over to be measured and paid for separately) including carriage of material in all leads and lifts. Angle Indian Universal closet
Providing and fixing to wall ceiling and floor high density polyethylene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet,outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including carriage of material in all leads & lifts.
Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers :SOLID TYPE including carriage of material in all leads & lifts.:white plastic seat and cover
Providing and fixing PTMT Jet spray of approved quality & colour with 1.50 metre tube including screws etc. complete in all respect 15mm dia incliding carriage of material in all leads & lifts.
Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S.brackets painted white including cutting holes and making good the same but excluding fittings including carriage of material in all leads & lifts.Flat back (i) 550mmx400mm
Providing and fixing C.P. Brass waste for wash basin or sink including carriage of material in all leads & lifts. 32mm dia
Providing and fixing C.P. Brass waste for wash basin or sink including carriage of material in all leads & lifts. 40 mm dia
Providing and fixing 600mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P.Brass screws and washers including carriage of material in all leads & lifts.
Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws :-(i) 600mm x 20mmm
Providing and fixing 600mm x 120 mm glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden plugs with C.P.Brass screws including carriage of material in all leads & lifts..
Providing and fixing toilet paper holder including carriage of material in all leads & lifts.(a) C.P.Brass.
Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws including carriage of material in all leads & lifts..
Providing and fixing C.P bath shower including carriage of material in all leads & lifts
Providing and fixing wall mixing faucet for shower and bath hand shower with Angular and Rest Holder including carriage of material in all leads & lifts.
Providing and fixing C.P Brass bib tap including carriage of material in all leads & lifts.(a) 15mm dia.
Providing and fixing C.P Brass pillar tap including carriage of material in all leads & lifts.(a) 15mm dia.
Providing and fixing C.P Brass angle valve including carriage of material in all leads & lifts.(a) 15mm dia.
Providing and fixing Mixer for kitchen sink with casted swinging spout at top including carriage of material in all leads & lifts
Providing and fixing P.V.C connection with brass unions :-(a) 300/450mm length.
Providing and fixing brass full way valve with whee lincluding carriage of material in all leads & lifts 20mm nominal bore
Providing and fixing G.I./M.I Union of following sizes (where not included in the items including carriage of material in all leads & lifts.. 15mm nominal bore
Providing and fixing G.I./M.I Union of following sizes (where not included in the items including carriage of material in all leads & lifts.. 20mm nominal bore
Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI Marked including fixing with approved adhesive etc. complete including carriage of material in all leads & lifts 75mm nominal size
Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI Marked including fixing with approved adhesive etc. complete including carriage of material in all leads & lifts 110mm nominal size
Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. Complete 75mm nominal size
Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. Complete 110mm nominal size
Providing and fixing PVC door bend with oval access door, insertion rubber washer 3mm thick, bolts and nuts ISI Marked complete including fixing with approved adhesive etc. complete including carriage of material in all leads & lifts. 75mm nominal size
Providing and fixing PVC door bend with oval access door, insertion rubber washer 3mm thick, bolts and nuts ISI Marked complete including fixing with approved adhesive etc. complete including carriage of material in all leads & lifts.110mm nominal size
Providing and fixing PVC single equal branch With oval access door insertion rubber washer 3mm thick, bolts and nuts complete. including fixing with approved adhesive etc.complete including carriage of material in all leads & lifts. 75 mm nominal size
Providing and fixing PVC single equal branch With oval access door insertion rubber washer 3mm thick, bolts and nuts complete. including fixing with approved adhesive etc.complete including carriage of material in all leads & lifts. 110 mm nominal size
Providing and fixing PVC coller ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads & lifts. 75 mm nominal size
Providing and fixing PVC coller ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads & lifts. 110 mm nominal size
Providing and fixing PVC Cowl ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads & lifts. 75mm nominal size
Providing and fixing PVC Cowl ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads & lifts. 110mm nominal size
Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive,cost of cutting & making good the wall & floors etc complete110x75mm including carriage of material in all leads & lifts.
Providing and fixing stoneware gully trap grade 'A' complete with C.I grating, brick masonry chamber in cement mortar 1:5and water tight C. I. cover with frame of 300mmx300mm size (inside) the weight of cover to be not less than 4.53kg and frame to be not less than 2.72kg.including carriage of material in all leads & lifts.Square Mouth Traps :100mmx100mm size P type
Inside size 800mm X 800mm and 500mm deep including Steel Fibre Reinforced Concrete manhole cover & frame (medium duty) 560mm internal diamension total weight of cover and frame to be not less than 173 Kg.( weight of cover 70 Kg. & weight of frame 103 Kg.).(a)With 230mm thick walls of brick masnary using common burnt clay building bricks in cement mortor 1:3(1 cement :3sand) including carriage of materials in all leads and lifts.
Construction chamber 300mm x300mmx500mm inside size for stop cock with C.I. surface box 100mm x 100 mm x 75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 sand 4graded stone aggregate 20mm nominal size) 75mm thick foundation concrete 1:5:10 (1cement : 5 sand : 10 grades stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement including curing complete :-with 100 mm thick walls of brick masonry in cement mortar 1:5(1 cement: 5 sand) including carriage of material in all leads & lifts.
Providing and Fixing ball bearing for rolling shutters
Cutting holes through existing stone work including making good the same in cement mortar 1:6 (1 cement : 6 sand ) per CMs.depth of cutting holes upto & including 400 Sq.Cm in area.
H. C. Bansal Engg. & Contt.
Vidya Infrastructure and Developers
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.22 MB
BOQ_59782.xls
BOQ • 0.30 MB
FormNo6MCNahan.pdf
Tender Documents • 0.19 MB
form8mcnahan.pdf
Tender Documents • 2.25 MB
approvedmakes.pdf
Additional Documents • 1.74 MB
corrigendumnewspapermcnhnbuildng.pdf
Tender Documents • 0.56 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .