NISER/ IWD-Civil/Utili/19/24-25/23

1 Foundation – Bricks Foundation as per drawing with the depth of 300 mm from below and 300 mm above ground level for anchor/column in the foundation. 4-inch-thick PCC below bricks work.2 Modular Toilet Structure: The structure size should be 4 ft. X 4 ft. for each Unit – 2050 mm. (i.e., Plinth top to Top roof) External & internal finish-Pure Polyester Glossy Powder Coating made of 0.6 mm thick MS Sheets with 38 mm high-density EPS (Expanded Polystyrene) insulation inside it,to make the toilet color. The steel panels have a glossy colored finish and are mounted on the structure at 4 foundation bolts and 4 corner columns. The roof is also made 0.6 mm thick MS sheet.Structure corner pillars – Column made of 1.5 mm thick, 275 MPa Strength zero spangled skin passed plain powder coated cold rolled sheet to be used for structure corner pillars. Doors – 1790 mm x 949 mm x 40 mm thickness, (made of 0.6 mm plain powder coated steel)inclusive of standard accessories i.e., 2 nos of Al handle (6 inches), 1 L drop with Plastic bush, 1No of Al Tower bolt (6 Inch) and hinges and screws Ventilation – Powder-coated steel ventilation above the door (built-in single panel) made of 0.6 mm thick, 275 MPa Strength Zero Spangled plain sheet. 3 External/ Internal finish – Pure Polyester Glossy Powder Coating 4 Water tank –200 Liters water tank on each cabin with frame. ( Brand: Plasto / Sintex / Paras / Equivalent ) 5 Toilet Pan& Flooring – Toilet pan 1 nos. size - 356 x368 x 356 mm ( Cera / sanitation/Johnson / equivalent ) with Anti-Skid Tiles of 12”x12”(Kajaria /Johnson/equivalent) 6 Plumbing – All external piping from point of source to toilet.All internal piping with UPVC pipe of nominal dia 20 mm with necessary unions for maintenance purposes & stop cocks. Paras/Astral or Similar: One bib-cock tap in each compartment. One stop-cock each for controlling water flow 1) Water source to tank 2) Tank to Washing Tap. Stainless steel SS wash basin (18x12 inch) with one bib cock & water supply connection. All other necessary pipe fittings like p-trap, vent pipes, etc.7 Electrical Fitting – 1 CFL 5 WT & 1 Modular switch (Anchor/Amron) in each compartment and required internal wiring, Wire (Polycab/CRV/Equivalent) 1.5 square mm 8 Soak pit – 3’ dia RCC Ring with top cover.9 Tensile Fabric – 4 x 3 Ft 01 nos. Tensile Fabric Canopy Above Side Wash Basin Platform. 16 Sqft.

SHREE JAGDAMBA PRASAD ENTERPRISES (BID ID -3186368)

ADJS INNOVATIONS PVT LTD (BID ID -3185794)

RAMESWAR ENTERPRISE (BID ID -3185071)