Construction and furnishing of new training hall in the campus of ADO office, Khariar, Dist - Nuapada

Excavation of foundation in hard soil within 50 m initial lead and 1.5 m initial lift including rough dressing and levelling etc. complete including cost of all labour with T&P required for the work etc. complete as per the direction for the EIC.

Filling foundation and plinth with sand well watered and rammed etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction for the EIC.

Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction for the EIC.

Brick work with Flyash Brick having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:6) in F&P etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction for the EIC.

Brick work with Flyash Brick having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:6) in Superstructure etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction for the EIC.

Ground Floor

1st Floor

RCC M20 using black hard crusher broken granite chips of approved quality from approved quarry including centering and shuttering, hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction for the EIC.

Ground Floor

Column Base & Plinth Band

Tie Beam

Lintel and sill pad

Column & Beam

Sunshade and Chajja

Ground Floor Slab

Staircase

1st Floor

Lintel and sill pad

Column & Beam

1st Floor Slab

Supplying ,fitting and placing uncoated HYSD bar reinforcement complete etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction for the EIC.

Ground Floor

1st Floor

16 mm thick cement plaster in cement mortar (1:6) with watering and curing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC.

Ground Floor

1st Floor

12 mm thick cement plaster in cement mortar (1:6) with watering and curing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC.

Ground Floor

1st Floor

6 mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC.

Ground Floor

1st Floor

Finishing wall surface of walls with Wall Putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.

Ground Floor

1st Floor

Finishing walls with 1 coat water based Primer on new work to give an even Shade including cost of Primer, per 1 sqm with cost of all materials taxes, labour T&P etc complete.

Ground Floor

1st Floor

Wall painting 2 coat with plastic emulsion paint of approved shade on New work to give an even shade including cost of Paint, per 1 sqm with cost of all materials taxes, labour T&P etc complete.

Ground Floor

1st Floor

Wall painting 2 coat with Weather coat paint of approved shade on New work to give an even shade including cost of Paint, per 1 sqm with cost of all materials taxes, labour T&P etc complete.

Ground Floor

1st Floor

Supplying, Fitting and fixing Vitrified tiles in Floors of size 600 mm x 600 mm of approved make conforming to IS13755 laid on 20 mm thick cement mortar [1:4] filling joined with white cement of approved quality complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC.

Supplying, Fitting and fixing Vitrified industrial floor tiles of premium grade having thickness 8 mm to 10 mm confirming to IS 1457 of size 300 mm x 300 mm laid on 20 mm thick cement mortar [1:4] filling joined with white cement of approved quality complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC.

Fixing Ceramic tiles size 30 cm x 30 cm / 40 cm x 40 cm in Floors, Treads on steps & landing on 25 mm thick bed of cement mortar [1:1] joined with neat cement slurry mixed with pigment to match the shade of the Tiles including rubbing and polishing complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete

Fixing Ceramic tiles 20 cm x 30 cm / 20 cm x 20 cm in Dado, Skirting and rises of steps on 12 mm thick cement mortar [1:3] joined with neat cement slurry mixed with pigment to match the shade of the Tiles including rubbing and polishing complete including rubbing and polishing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of engineer-in-charge, excluding labour cess and GST.

Supply, Fitting & Fixing of Iron work wrought and put up in grated doors, windows, Collapsible gate and cage latrines including of all materials with labour, cess and T&P etc. required for the work complete as per the direction of engineer-in-charge, excluding labour cess and GST.

Priming one coat to Steel surface with Red oxide Primer complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC.

Painting Two coat to Steel surfaces with Enamel Paint complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC.

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90m C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect engineer-in-charge, excluding labour cess and GST.

Supplying, fitting & fixing in position of Window (sliding type) made of aluminum section 9778 as windows frame section No. 4095, 4096, and 9777, 3994 as shutter frame with 5 mm thick black glass as panel fitted with rubber bending including locking arrangement including all fitting complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work complete as per the direction of the EIC.

Supplying, fitting & fixing in position of Window (Fixed type) made of aluminum section 9778 as windows frame section No. 4095, 4096 with 5 mm thick black glass as panel fitted with rubber bending including all fitting complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work complete as per the direction of the EIC.

Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures in all Floors. As per SOR 2022, new miscellaneous items, sl no 13 page no 235.

Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures in all Floors. As per SOR 2022, new miscellaneous items, sl no 12 page no 235.

Providing Fitting and fixing Steel meattaic Letter for Office Sign Board of 30cm height with fixing as per approved text and design using the fixing addessive bond on the wall as specified by , including cost, conveyance of all materials with labour, and T&P etc. required for the work complete as per the direction of engineer-in-charge, excluding labour cess and GST.

Providing and Fitting Tiles Granite tiles 10mm thick 0.1sq to 0.4 sqm size in floors , treads or steps and landing on 5mm thick bed of cement with mortar (1:1) with neat cement slurry mixed with pigments excluding cost of precast tiles, including cost, conveyance of all materials with labour, and T&P etc. required for the work complete as per the direction of engineer-in-charge, excluding labour cess and GST.

Supplying, fitting & fixing in position of False Ceiling with aluminium anodized T section No.3215 with 2'-0" center to center, L section No.1705 up to 15 micron on 4 walls to be fixed by means of steel screw and P.V.C. plug and the aluminium grid 2'-0" x 2'-0" with 12.5 mm thick gypsum board of size 6' x 4' suspended from ceiling etc. complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC.

Providing and laying of Table made of 19 mm BWR ply(IS-710) with 1.0 mm sunmica of primium quality of aproved shade and texture for top and lower leyer with 12 mm thick BWR ply for front cover paddle platform properly laminated both side with premium sunmica outer side and 1.0 mm inner sunmica for inner side with vertical support at a distance of 60cm and interim one layer horaizantal support with top border of 10cm wide using waterproof synthetic Resin adessive of ISI Mark properly fixing ply and sunmica with decorative boarder all complete measured horizantally on the top finished surface surface with labour and materils TC as per the direction of engineer-in-charge, excluding labour cess and GST.

Supplying and fixing of Roller blinds by fixing powder coated top channel, bottom channel with bottom end cap, control unit and good quality of 0.60 mm thick fabric of approved design and quality etc. complete.

Supply of chair of revolving type Having mid back, Fabric Upholstered back and seat chair, Seat plate Mechanism, Fied armrest, nylon star base, nylon casters of size 550mmWx515mmDx955mmH Make- Nilkamal/Godrej

Supply of 4 leg red cushion armed chair Having mid back, Fabric Upholstered back and seat chair Make- Nilkamal/Supreme

Water supply and Sanitary work

Fixing 1000 litre/500 Litre capacity Double Layer Cylinderical Vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 10.00 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge, excluding labour cess and GST.

Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D- 1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete, as per the direction of engineer-in-charge, excluding labour cess and GST.

32 mm dia PVC ASTM pipe (sch-80)

15 mm dia PVC ASTM pipe (sch-80)

Providing and fixing of the fittings including all materials and labour as per the direction of engineer-in-charge, excluding labour cess and GST.

15mm dia C.P. short body bib cock

15mm dia C.P.long body bib cock

15mm dia C.P.Angular stop cock

15mm dia CP revolving shower

CP soap holder

Ball Valve teflon brass ball & spindle 32 mm

Suppying and fixing Porcelain 22"x 16"(550x400) Wash Hand Basin with approved make & model with CI brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc including fixing Chromium Plated waste pipe of 32 mm nominal diameter, Chromium Plated Pillar taps & Chromium Plated Angle Valve of 15 mm dia nominal bore with approved make & model, 15 mm dia PVC inlet connection pipe as per P.H specification including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work complete as per the direction for the EIC., excluding labour cess and GST.

Fixing Wash Down Water Closet (European type W.C pan) with integral or trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. as per the direction of engineer-in-charge, excluding labour cess and GST.

Fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification.

Providing and fixing 10 litre capacity - White P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures completeas per the direction of engineer-in-charge, excluding labour cess and GST.

Fixing bowl pattern urinal conforming to IS 2556: Part6-1996 including connecting the urinal of 430x260x350 mm or 340x410x265mm sizes respectively with waste pipe by means of white lead mixed with chopped hemp with 15 mm dia CP Urinal Spreader etc all complete as per specification as per the direction of engineer-in-charge, excluding labour cess and GST.

Fixing glazed earthenware squatting plate of size 600mmx350mm conforming to IS 2556 : Part 6-1995 with intigral longitudinal flushing pipe including embeding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:4:8) using 40mm hard grabnite metal etc all complete as per specification.(size 450mm x 350mm) as per the direction of engineer-in-charge, excluding labour cess and GST.

Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specification. as per the direction of engineer-in-charge, excluding labour cess and GST.

Fixing standard sized Chromium Plated brass towel rail [600x20 mm] complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification as per the direction of engineer-in-charge, excluding labour cess and GST.

Laying in trenches PVC pipes conforming to IS:4985-2000 and specials of thefollowing outside dia Pipe (ISI type-A) including jointing with supply of approved solvent cement by non-heat application method including testing as per specification complete. (Earth work in trenches to be measured and paid for separately)

75 mm OD P.V.C. SWR S/S Pipe

110 mm OD P.V.C. SWR S/S Pipe (Rain Water Pipe)

Supplying and fixing 90 mm dia P.V.C. Nahani Trap [PVC floor traps] as per P.H specification including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work complete as per the direction for the EIC.

Other sepitic tank fittings and connection with saok pit and etc

Extra fitting for water supply Connection

Proving and fixing of PVC doors for Toilet including frame complete in all respect both materials and labour as per the direction of engineer-in-charge, excluding labour cess and GST.

Providing and fixing RO water purifier of 7 litre and above container capacity of make like Livpur/Aquaguard/kent with all fitting complete including supply of water supply to the point all complete as per the direction of Engineer-in-Charge

Construction of Septic Tank and Soak Pit

Excavation of foundation in hard soil within 50 m initial lead and 1.5 m initial lift including rough dressing and levelling as per the direction of engineer in charge

Filling foundation and plinth with sand well watered and rammed including cost and conveyance of materials.

C.C.(1:4:8) with 20 mm. size h.g. metal in F&P including cost, conveyance, royalties of all materials with all labour, and T&P required for the work etc. complete in all respect as per the direction of engineer-in-charge, excluding labour cess and GST.

C.C.(1:2:4) with 12 mm. size h.g.chips including cost, conveyance, royalties of all materials with T&P etc. Required for the work complete.Excluding the cost and TC and laynig of HYSD bars as per the direction of engineer-in-charge, excluding labour cess and GST.

Providing HYSD bars for reinforcement as per technical specification including cost, conveyance of all materials with labour, and T&P etc. required for the work complete as per the direction of engineer-in-charge, excluding labour cess and GST.

Brick work with Fly AshBrick having crushing strength not less than 75 kg/cm2 in cement mortar (1:4) in F& P as per the direction of engineer-in-charge, excluding labour cess and GST.

Honey comb masonary work with Fly AshBrick having crushing strength of 75 kg/cm2 in cement mortar 1:4and plastering in 1:6 as per the direction of engineer-in-charge, excluding labour cess and GST.

Filling of brick khoa

16mm plastering in cm (1:6) as per the direction of engineer-in-charge, excluding labour cess and GST.

Cement punning

Providing and fixing of man hole of cast iron of 0.6m dia including fixing with cement mix prpoely with all TC materials complete

Electrification

Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with one 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

Group A

Group B

Group C

Supplying and fixing of following piano type switch / socket on the existing switch box / cover including connections etc as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC. (For light plugs to be used in non residential buildings)

5 / 6 amp switch

3 pin 5 / 6 amp socket outlet

15 / 16 amp switch

5 pin 15 / 16 amp socket outlet

Providing & Recessed wiring to submain in 2 X following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex /L&T /Anchor /Havels /V Guard) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

(2 x 1.5 sq.mm + 1 x 1.5 sq.mm)

(3 x 2.5 sq.mm + 1 x 1.5 sq.mm) (2.5 mm inverter line included)

(2 x 4 sq.mm + 1 x 1.5 sq.mm)

(2 x 6 sq.mm + 1 x 2.5 sq.mm)

Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

Providing, Supplying and fixing of metal box of 150 mm x 75 mm x 60 mm (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc as required. (For light plugs to be used in non residential buildings) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

Providing, Supplying and fixing of metal box of 180 mm x 100 mm x 60 mm (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc as required. (For light plugs to be used in non residential buildings) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

Supply and fixing of Single 5 amp to 32 amp rating 240 V "B" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

Supply and fixing of Single pole 5 amp to 32 amp rating 240 V "C" series miniature circuit breaker suitable for inductive loads in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

Supply, Installation, Testing, and Commissioning of 63 Amp TPN Main switches with HRC fuse of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC. Make- SEIMENS /HPL /ANCHOR /L&T /HAVELS /C & S/ RK

Providing & Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

Supplying and fixing batten holder / BK angle holder ISI marked including connection etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

Supplying and fixing of LED Light (Bulb/Tube Light)/Street Light/Flood Light of ISI marked including connection etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC. (Havells/Bajaj/Crompton/Phillips)

15 Watt LED Light Bulb

20 Watt LED Tube Light

30 Watt LED Street Light

50 Watt LED Flood Light

Supply, Installation, Testing and Commissioning of 48” AC ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC. (Bajaj, Usha, Khatian,Havells, orient)

Supply, Installation, Testing and Commissioning of resistance type ceiling fan regulator, in existing switch box including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

Installation, testing and commissioning of exhaust fan upto 300 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC. (Bajaj, Usha, Khatian)

Supply and Installation, testing and commissioning of 4 Kva Inverter with 12v 150Ah Battery and above with connecting to the power supply line and wiring all complete. (make Luminous)

Supply and Installation, testing and commissioning of Air Conditioner of 1.5 ton (Inverter type ) with 5 star rating with power stabiliser 4 KVA, labour for opening, including making the hole to suit the size of the above A/C, making good the damage wall complete all materils and labourincludingconnection, etc.as required.(LG,Voltas, Llyod,)

Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground in the same trench in one tier horizontal formation including excavation , filling the trench etc. as required but excluding and cushioning , protective covering complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

Supply, installation and testing of digital projector of brightness 3300 lm model supporting HDMI port with mounting the unit on roof including all fittings including screen of 8x6ft with supporting stand with cable for connecting both electcity and data cable of 20 m each with all materials and labour as per the direction of engineer in charge. Make- Epson/Cannon/Benq

Provision for installation fixing, fitting of sound system in Dias and conference table including 1 no. of Mixture Amplifier including remote control, 5 nos. of Paging microphones, 1 set Wireless micro phone,1 set including 2 nos of micro phone , 1 no. of receiver and Battery. Make- Ahuja or similar brand

Please Enable Macros to View BoQ information