Loading
Loading…
Loading…
Tender ID
Tender Value
₹41.5 L
EMD Value
₹83,000
Closing Date
27 Mar 2026, 2:00 pmClosed
SECRETARY
uit alwar
Providing and Fixing of Facade lighting in area of Ex.Ex-I moti Dungari Alwar
2026_UITAL_546693_20
NIT 44/2025-26
Open Tender
Electrical Works
Percentage
90 days
UIT ALWAR
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Secretary, UIT
₹83,000
Yes
23 Mar 2026
23 Mar 2026
27 Mar 2026
23 Mar 2026
27 Mar 2026
23 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| - | Supply and erection of Galvanized Iron pole with galvanizing done in single dipping (Average coating thickness Minimum 65 Microns) continuously tapered poles having Octagonal / Circular cross-sections designed to withstand the maximum wind speed as per IS 875, The pole shaft shall be made from sheet steel (HT Steel Conforming to grade S355JO) and confirming to BSEN 10025 and shall be continuously tapered with single longitudinal welding. There shall not be any circumferential welding. The welding of pole shaft shall be done by Submerged Arc Welding (SAW) process. pole shafts shall be provided with the rigid flange plate of suitable thickness (Fe 410 conforming to IS 226 / IS 2062) with provision for fixing 4 no. foundation bolts, This base plate shall be fillet welded to the pole shaft at two locations i.e. from inside and outside.The octagonal Poles shall have lockable door of approximate 500 mm length at the elevation of 500 mm from the Base plate with bakelite sheet having 6A SP MCB and 16 sqmm stud type connector ( 4 nos) inside the pole at door opening for cable connection of following length and dimension as per table P-01 with base plate and foundation bolt on the Existing cement concrete foundation.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . | - | - | - | - |
| - | Poles with Octagonal Cross Section | - | - | - | - |
| - | 4 Mtr. | - | Each | - | - |
| - | Providing and Laying RCC Foundation for Octagonal / Conical Street Light poles, High mast Poles as per Drawing attach at Table P-4 with Following Procedure & All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . | - | - | - | - |
| - | A) Excavation of Pit for Foundation Size upto required depth from Ground level | - | - | - | - |
| - | B) Dressing of Pit and Dry stone pitching 200 mm thick including supply of stones and preparing surface complete. | - | - | - | - |
| - | C) Providing and laying in position cement concrete of M-10 grade of 75 mm thickness | - | - | - | - |
| - | D) Reinforcement for R.C.C. work with TMT bars including straightening, cutting, bending, placing in position and binding all complete. | - | - | - | - |
| - | E) Centring and shuttering including strutting , propping etc. and removal of form work for Footing and Pedestal | - | - | - | - |
| - | F) Providing & Fixing of 2 no. Required Size PLB HDPE Pipe & Foundation Bolt with template as per OEM Recommendations. | - | - | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.37 MB
Tendernotice_2.pdf
PDF • 0.22 MB
BOQ_977210.xls
BOQ • 0.76 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .