Furnishing and Modification of District Police Training Centre Kasaragod

Amount

CIVIL WORK

12.45.2 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum fire resistant board conforming to IS; 2095-Part I

od160412/2020_2021 : Supplying and providing 2 seater sopha using 12 mm marine plywood and hardwood frame wherever required with superior quality jute or artificial leather on back, seat and sides of approved make including 32 density 4 inch foam, 32 density 3 inch foam, 32 density 1 inch foam, cora cloth, nails, adhesives etc complete. The rate includes all material cost, labour, conveyance etc complete

od160413/2020_2021 : Supplying and providing sofa side table (approximate size 600x800x600 mm) of approved design using 9 mm marine plywood finished with 3mm thick approved shade laminate and all faces polished.The rate includes material cost, conveyance charge etc complete.

od160771/2020_2021 : providing and fixing ready made curtains / blinds to the openings including all pvc fittings labour charges etc

od160745/2020_2021 : Wooden chair for all rooms (writing chair)duly finished of Hard wood frame as per the design provided. Wood surface shall be sanded smoothly with two coats of sealer applied and finished with two coats of polyurethane / melamine ( glossy/matt finish) in teak or mahogany finish. Good quality Cusion with high grade furniture fabric shall be used to finish the seats.<br>

od160747/2020_2021 : Supplying good quality writing Tables with hard wood frames of approved quality and size 100 x 60, finished of Hard wood frame as per the design provided. Wood surface shall be sanded smoothly with two coats of sealer applied and finished with two coats of polyurethane melamine (glossy/matt finish) in teak or mahogany finish.<br>

od160748/2020_2021 : Supplying and providing at end to end wall Wardrobe: wood frame of appropriate sizes and 12mm marine plywood with 4mm thick veneer on the exposed side and all the remaining area is finished with two coats of primer , two coats of putty and two coats of enamel paint and the veneered surfaces are polished with melamine glossy/matt finish including wax polishing and the cost for drawer sliders, auto closing hinges, knobs, locks and handles etc. as per design<br>

od160750/2020_2021 : Supplying and providing Glass Top Dining Table with Frame size 80cmx80cmx75cm and 12mm thick glass with 6 no of chairs. The rate includes all material cost, labour,conveyance etc complete.

od160751/2020_2021 : Supply of Teak Wood Bed of size 200x210 cm or nearest available size including Wood surface shall be sanded smoothly and two coats of sealer applied and finished with two coats of polyurethane melamine (glossy/matt finish) polish, all loading and unloading charges, all conveyance etc as Directed by Departmental Engineers.

od160418/2020_2021 : Supplying duroflex/sleepwell or approved equivalent pocketed spring mattress with superior quality foam,fabric,spring with proper edge support,tempering,border etc with a minimum warranty of one year(200x200x25cm or nearest size to suite the Bed)

od160419/2020_2021 : Supplying duroflex/sleepwell or approved equivalent pillows

10.16.3 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Electric resistance or induction butt welded tubes

12.1.1 : Providing corrugate G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/m2

12.7.2 : Providing and fixing 15cm wide, 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.63 mm thick with zinc coating not less than 275 gm/ m2

50.18.9.7.2 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.63 mm dia 4 Kgf/cm2

ELECTRICAL WORKS

1.10.1 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group A

1.55.1 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group A

1.55.2 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group B

1.55.3 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C

1.17.3 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.17.12 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

1.17.21 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm

1.17.30 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 6 sq. mm

1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

1.27.3 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.4 Module (125mmX75mm)

od233583/2020_2021 : Supply and fixing casing and capping of reputed brand (Legrand/ precision/ pressfit) with ISI mark. 25 mm

od233585/2020_2021 : Flexible PVC Above Fall ceiling 25mm

1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.32 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

90.10.3.15 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )

od232580/2020_2021 : Supply ,instalation,testing and commitioning of the following split A/C (3 star ratings)VOLTAS/LG/BLUESTAR,includind copper pipe, bracket for fixing out door unit and giving connection and including stabiliser<br>1.0TR With V-Guard stabiliz

od233582/2020_2021 : supply,installation of Philips 5-Watt Round Astra Prime Plus Recessed Downlighter Ceiling Panel Light (Warm, or equivalent

od232582/2020_2021 : Supply,installation and testing of 12W LED Panel light square/round of make Havells octane/Crompton/Philips

od232583/2020_2021 : Supply,installation and testing of 9W LED Panel light square/round of make Havells octane/Crompton/Philips

od232584/2020_2021 : Supply,installation and testing of 6W LED Panel light square/round of make Havells octane/Crompton/Philips

od233575/2020_2021 : Supply,installation of water dispencer with hot,cold and normal feature with storage cabinet of brand bluestar or equivalent

od233576/2020_2021 : Supply,installation of 3 STAR Rated DoubleDoor Inverter Refrigerator 260Ltrs or above with energy consumption below 200* units per year of Brand LG(T292RPZN)/Samsung

od233577/2020_2021 : supply,installation of V-guard 6-Litre Storage water Heater

od233578/2020_2021 : supply,installation of Havells 6-Litre Storage water Heater instanio model or equivalent

od233579/2020_2021 : supply of electric kettle 1.6 ltr or above of brand preethi or equivalent

od233580/2020_2021 : supply of electric kettle 1.5 ltr or above of brand prestige

od233581/2020_2021 : Induction cooktop of brand butterfly/philips/prestige

ABDUL NAZAR M A

M A ABBAS VASHID

Bidder Name

ABDUL NAZAR M A

Rajesh B

M A ABBAS VASHID