Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.6 L
EMD Value
₹3,300
Closing Date
8 Dec 2025, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
EE JSV Mandi
Dismentalling Relaying Laying Jointing and testing of GMS tube 50mm 40mm L from RD 6000 to 6175 and C/O intake Chamber
2025_HPIPH_122174_1
13579-678
Open Tender
Civil Works
Item Rate
90 days
Mandi
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
₹3,300
5 Aug 2026
29 Nov 2025
9 Dec 2025
29 Nov 2025
8 Dec 2025
29 Nov 2025
Excavation in foundation and trenches etc. (including pipes and pits upto all depths) in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming dressing where ever required including restoration of un-metalled surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respects with in all leads & lifts as per directions of Engineer-in-Charge.
Dismentaling of GMS Tube (L) grade tube fitting of various dia i/c all fitting complete in all respect with in all leads & lifts.Existing Gl Pipe 50 mm dia
Existing Gl Pipe 40 mm dia
Relaying, jointing & testing of GMS Tube (L) grade tube fitting of various dia i/c all fitting complete in all respect in all leads and lifts. Existing Gl Pipe 50 mm dia
Existing Gl Pipe 40 mm dia
Laying, jointing and testing of GMS tube in trenches (light grade) of following dia meter including providing and fixing tube fitting such as bends, tees, air valves, unions and collars etc. including carraige of GI pipes as per direction and to the entire satisfaction of the Engineer-in-charge (earth work in trenches to be measured and paid for separately) in all leads and lifts. GI Pipe 50 mm dia
GI Pipe 40 mm dia
Providing and laying in position cement concrete of cement concrete 1:3:6 (1cement:3 sand: 6 graded stone aggregate 20 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth level:-
Providing and laying in position reinforcement cement concrete 1: 1% 3 mix. (1 cement: 1% sand: 3 graded stone aggregate 20mm nominal size) of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:Foundation footings bases of columns and the like; and mass concreteas per direction and to the entire satisfaction of Engineer-in-Charge.
Walls any thickness but not less than 0.1m thickness including attached pillaster buttresses, plinth and string courses from top of foundation upto two level all floor level as per direction and to the entire satisfaction of Engineer-in-Charge.
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15" landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of entering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1,5 coarse sand): 3 graded stone aggregate 20 mm nominal size).
Centering and shuttering including strutting, propping etc. and removal of form for all heights: Suspended floors, roofs, landings, balconies and access platform in all leads and lifts.
Centering and shuttering including strutting, propping etc. and removal of form for all heights: Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.in all leads and lifts.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
Providing and placing in horizontal layers filtering media duly graded, screened, washed and cleaned as specified by the Engineer -in-Charge.Top Layer:- Coursed sand screened, cleaned, washed & graded 3 mm to 6 mm from approved quarry in all leads and lifts.
2nd Layer: Bajri screaned, washed and graded 6 mm to 20 mm from approved quarry in all leads and lifts.
3rd Layer Layer:- Bajri screaned, washed & graded 20 mm to 25 mm from approved quarry in all leads and lifts.
Terms and conditions
The work should be executed as per PWD/JSV specifications and to the entire satisfactions of the Engineer-in Charge.
The cement, steel and GI Pipes shall be issued by the department from JSV Divisional Store Raghunath Ka Padhar Mandi cement @ 368/- per bag, Steel Rs. 7615/-only per qtl. And GI Pipes free of cost respectively.
The Contractor will be fully responsible for watch and ward of material at site of work.
Nothing shall be paid for rejected/sub-standard material at site of works.
Concrete work shall be done by using vibrator and concrete mixing plant.
Crushed aggregate will be used in concrete work.
Material should be used of approved quarry.
The work should be completed within the stipulated period.
The rates Should be inclusive with GST and carriage
1% labour cess will be deducted from the bill of the contractor.
GST as applicable will be borne by the contractor.
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.36 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.60 MB
Form6.pdf
Tender Documents • 0.58 MB
Form8.pdf
Tender Documents • 1.24 MB
BOQ_179232.xls
BOQ • 0.48 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .