Installation of Beautification Lighting around Sagar Balaka Bungalow (Sagar old Bus Stand) at sagar Island, South 24 Parganas.

Supplying and fixing following TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating - 32A, (Make - L&T / Siemens / Havells)

Supplying and fixing following double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. - (Make - Legrand / Schneider / Siemens/ ABB) a) 2 + 4 way

Supplying and fixing following 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. - (Make - Legrand / Schneider / Siemens/ ABB) a) 32 A DP

Supplying and fixing following 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. 6 A-32A, SP, (Make - Legrand / Schneider / Siemens/ ABB)

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish- 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC - Average run 6 mtr

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish.- Average run 6 mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish On Board

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Brand approved by EIC) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works. On Board

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required

a) 3 x 22/0.3 (1.5 sqmm)

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes

a)22/0.3 (1.5 sqmm)

Supply & fixing of 220V, 8 Watt New generation, energy saving, aesthetically designed, recessed mounted down light with 15° tilt pressure die-cast aluminum heat sink & high efficiency long life COB LED mounted on MCPCB with high efficacy for enhanced lumen output. THD <10%[Make: Havells - UNECOADJDLR8WLED830S24-G2 / Crompton/Wipro/Philips]

Supply and delivery of 230V 230mm (9") Exhaust fan with all necessary accessories, as directed by EIC. [Make: EPC , Usha, CG, Bajaj or equiv Make]

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 23 cm (9")

Supply & Fixing GI louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long)) - For 23 cm (9") Exhaust fan

Supply of 220-240 V B22 9 Watt CDL/ 6500K LED Lamp (Make:Havells Cat no.LED ADORE PLUS 9W B22 CDL 3 STAR LAMP, Philips/Crompton or as per EIC)

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling.

Fixing only lamp

Supply & delivery of 1.1 KV Gr. XLPE Armoured Aluminium Cable (Gloster / Havells /KEI/ Polycab/ RR Kabel )

a) 4 core 25 sq.mm

b) 4 core 6 sq.mm

c) 2 core 6 sq.mm

Laying of cable on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

a) 4 core 25 sq.mm

b) 2 core 6 sq.mm

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below -

a) 4 core 25 sq.mm

b) 4 core 6 sq.mm

c) 2 core 6 sq.mm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials

a) 4 core 25 sq.mm

b) 4 core 6 sq.mm

c) 2 core 6 sq.mm

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required - 40 mm dia

S & F of 9 Watt Decorative SPIKE LED light with compact, light weigh, energy saving, IP66 spike light using COB LED as offered in mono -Red , Green, Blue & Warm white colour in Multipurpose application incl. necy connection as per GS. (Make -Havells / Signify / Cropmton/Wipro))

Foundation of above pole with Base Flange & foundation nuts, Bolts etc on RCC (4:2:1) foundation having (L- 200 mm x W-200 mm x H-200 mm) below the ground level after brick soling with 2 Nos bricks and (L-200 mm x W- 200 mm x H-100mm) above ground level including neatly cemented finish (3mm thick) above ground level and fixing the spike lights/ Bollard on the foundation etc. including filling up the pit with shifted soil and ramming properly as directed by EIC.One no PVC pipe 32mm dia of Suitable length for 2 nos. cable entry should be provided.

S & D of 9W Decorative LED Bollard in IP66 to ensure sustainable Performs in all section which keeps the surrounding lively incl. necy. Interconnection as per GS. (Make - Havells - TURINBLS10WLED830PSYMTOPC / Signify / Cropmton/Wipro)

S & D of 10W Decorative Mini LED Bollard,Sturdy IP 65 LED Bollard with excellent light out put through its sleek PMMA window ensuring maximum illumination aspect in surrounding (Make - Havells -MINIMOUNTBL10WLED830PSYMTOPMMAS / Signify / Cropmton, cat no-LBLA2-10-CDL/Wipro)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:By ISI-Medium GI pipe

Excavation of soil for installation of Earth Electrode and filling & ramming. [For Soft Soil]

Connecting the equipments body to earth busbar including S&F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Note: 1) All the above rates should be quoted inclusive of all taxes, duties and all ancilery charges with cost of maintenance, servicing, supply & replacement of spares for 1 (One) year (DLP) from the date of completion. 2) Total is rounded off to the nearest rupees.

Please Enable Macros to View BoQ information