SPECIAL REPAIRS TO OR MARRIED ACCOMMODATION BLOCK NO P130 BLOCK NO P104 1 4 AT ASHOK NAGAR AND PROVN OF STORE ROOM AT COD HOUSE AT GE DEHU ROAD

Amount

Surface dressing n exc 15 cm deep and getting out hard and dense soil complete all as specified and as directed by engr-in-charge.

Excavation in trenches n exc. 1.5m wide and not exc 1.5m in depth and getting out in hard / dense soil for foundation etc. complete all as specified and as directed by engr-in-charge.

M & L Damp proof course 40mm thick (in cement concrete 1:2:4 Type B-0) to horizantal or vertical surface including necessary formwork complete all as specified and directed by engr- in- charge.

M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

M&L for hardcore of gauge n exc .63 mm, deposited, spread and levelled in layers n exc. 15 cm thick waterd and rammed t a true surface complete all as specified and as directed by engr-in-charge.

M&L for 50 mm thick PCC (1:2:4) type B-0 using 12.5 mm graded stone agg in sub base of floor.complete all as specified and as directed by engr-in-charge.

Dismantling of single layer Mangalore pattern or similar tiles in roofing.

Dismantling timber in fillets,rafters,purlins etc. under 40 sqcm in section unframed work.

Dismantling of battens for tiles, shingles etc, of any size including tilting fillets exc 15 cm spaced from roof tiles.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering

Dismanteling MS works of any desc. not otherwise provided for complete all as specified.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.. conf to Fe-410-w(gdeE-250 quality-A)

S & F for MS work as in wind tie or any other work including cutting, drilling holes etc.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

All as per item No. 14 above but fix in valley gutter / ridge

Demolition of brick work built in cement mortar including all arches, pillars all quoins etc complete all as directed.

M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan exc 6 m mean radius, complete all as specified

Dismantling wall/ ceiling boards(fiber pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets

M & L for anodised aluminium snap grid frame work for false celing including hangers 6mm dia GI (adjusting level fixed to roof slabs by means of ceilling cleat made out of GI flat 40x3mm size 60 mm long and expansion hold fasteners 12.5mm dia ,40mm long complete all as specified

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar.

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed no pigment to match the shade of the slab including rubbing and polishing, screed bed of mortar 15 mm thick (1:4) for laying floor finishes complete all as specified.

Material and labour for 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite screed bed of mortar 15 mm thick (1:4) for laying floor finishes complete all as specified and as directed.

Dismantling of PVC water tank of capacity upto 500 litre complete all as specified and directed.

Disconnecting existing PVC water tanks of capacity 500 litres, setting aside (or lowering if required) for replacement complete all as specified and as directed.

Fixing only water tanks of capacity 500 Ltr incl cleaning and removing all scale and dirt etc from tanks and mouth of circulating pipes.

S & F rotational moulded polyethylene water storage tank of 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing serviceable tiles to store & rubbish off the premises etc complete all as directed.

M&L for vitrified ceramic tiles 7 to 8 mm thick, light shade (square/rectangular) polished, area of each tiles not exceeding 0.36sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or cloloured cement to match incl screed bed in CM 1:6 complete

Ditto item no 28 above but skirting only

M&L for joint free non-skid ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exc 0.11sqm but n.exc 0.18sqm, of approved colour in floors, set and jointed in neat cement slurry and pointed with coloured cement to match the tile colour. over 15mm thick screed bed in CM (1:6) for floor.

Ditto item no 30 above but skirting only

M&L for Non-skid white Ceramic tiles of size 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified.

M&L for glazed coloured ceramic tiles 350 mm x 250mm/450mmx350x7 to 7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:4 all as direced.

Taking down chowkats or frames with shutters ( without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each and removing to store.

Ditto as above but n'exc 1.5 Sqm each.

Taking down shutter of any description exc. 1 sqm but not exc 2 Sqm each complete all as specified and directed.

Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5 mm thich PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing

S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm.

M&L PCC (1:3:6) type C-1 using 20mm graded stone agg filling of pressed steel door frame complete all as specified and as directed by engr-in-charge.

S & F factory made 35 mm thick glazed & skeleton shutter of 1st class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified.

S & F for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

Dismantling wooden Boarding of any description fixed in any position with nails.

S&F medium density particle board, 18/19mm thick, flat pressed three layer or multilayer and graded (grade I or grade II) bonded with BWR adhesive , fixed with screws to timber frame work/steel frame work for kitchen cabinet etc complete all as specified

S&F medium density particle board, 25mm thick, flat pressed three layer or multilayer and graded (grade I or grade II) bonded with BWR adhesive , fixed with screws to timber frame work/steel frame work for kitchen cabinet etc complete all as specified

S&F External teak wood lipping 6 mm thick for 18/19 mm thick particles board, block board or veneered particle board fixed with nails. (for Kitchen cabinets)

S&F stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples.

S & F of 100 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F of 150 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F of 100 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.

S & F of 150 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.

S&F 75 mm MS, Butt hinges,medium weight cold rolled fixed with screw or welding complete.

S&F 100 mm MS, Butt hinges,medium weight cold rolled fixed with screw or welding complete.

S&F 125 mm MS, Butt hinges,medium weight cold rolled fixed with screw or welding complete.

S & F of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed.

S&F in repairs 12 "corner glass 8mm thick fancy type chromium plated screwed down for fixing to wall with screw all as apecified and directed.

S & F for 300mm mild steel , ordinary rat tail rod pattern springs including roller and roller plate complete

S&F in repairs 25mm chromium plated aluminium alloy anodised curtain rod fixed to brackets complete all as specified and directed.

S&F aluminium anodised brackets for 25mm dia curtain rods complete all as directed.

Demolition of concrete ( unreinforced ) in ground floors and paving nexc 15 cm thk (below or above ground level)

M & L 75 mm thick Cement concrete type C-2, 1:3:6 (40 mm gr agg) as in plinth protection finished even and fair .

S & F in repairs Ball brass valve high pressure with polyethene float and nuts complete screwed for iron pipe or brass ferrule bore of pipe 20 mm dia complete all as specified.

Taking up or down steel tubes and connections including cleaning for refixing or removal to stones bore of pipe 15mm.

All as per item No. 63 above but bore of pipe 20mm

M&L GI tubes, medium grade with all fittings and fixed complete to walls, ceiling or laid in floors, bore of pipe 15mm

Fixing only tubes, any grade, to walls and ceilings or laying in floors, bore of pipe 15 mm

M&L GI tubes, medium grade with all fittings and fixed complete to walls, ceiling or laid in floors, bore of pipe 20 mm

Fixing only tubes, any grade, to walls and ceilings or laying in floors, bore of pipe 20 mm

S&F in repair stop valves fancy type chromium plated cast copper alloy with capstan heads screwed down high pressure screwed both ends for iron pipe or union fixed for 15 mm dia GI pipe.

S&F in repairs bib taps chromium plated cast copper alloy with capstan headsscrewed down, screwed for iron pipe or for brass ferrule and fixed for 15mm dia pipe.

S & F in repairs Brass chromium plated with capstan heads shower rose of 125 mm dia complete all as specified.

S&F Grating round 140 mm size of PTMT (Minimum weight 50gms.)

M&L in repairs vitreous china wash basin, white, flat back, size 550x400mm including waste pipe, porcelain stopper and brackets including cutting for and pinning in ends of brackets or erecting stand PVC connection 15mm dia , 450 mm long HDPE pipe of pressure rating 6kg/sqm complete all as specified

S&F 15mm nominal size, pillar taps, cast copper alloy body and body components with capstan heads, spindle, washer plate and nut with screwed shanks and back nut, with or without lettered hot or cold, nickel-chromium plated finish complete all as specified

S& F in repairs stainless steel Sinks kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each complete all as specified.

S & F for PVC connection pipe 15mm dia with PTMT nuts of length 450mm

S&F as in repairs PVC low/high level flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl brackets fixed in repairs all as directed. (Note:- Removing existing fluhing system of CI or any other quality incl brackets).

S&F in repairs vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistem & flush pipe fixed in repairs .

Taking down cement plaster of any description of brick or stone wall etc incl racking out joints and hacking for key, scrubbing down with water etc complete.

M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or conrete surfaces finishing the surfaces even and smooth without using extra cement.

M&L for preparation of new surfaces plastered or unplastered new surfaces & applying two coats of oil bound distemper on walls priming surfaces with alkali resistant priming paint

Material and labour for Preparation of newly plastered surface walls and applying two coats of weather proof paint on external surfaces including a coat of acrylic based primer complete all as specified and as directed by Engineer-in-Charge.

Preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of acrylil distemper complete all as specified and as directed by Engineer-in-Charge.

M&L, for complete removal of existing treatment on walls applying two coats of oil bound distemper over one coat of primer and putty including preparation surfaces complete all as specified and as directed.

M & L for preparation of new wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for preparation of old wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L Two coat of synthetic enamel paint on New steel surfaces over 10 cm width or girth incl prepration of surfaces over red zinc chrome primer complete

S & F powder coated aluminum frame for doors, windows & ventilators with one or more rebate inlcuding jointing cleats and alike for fixing complete all as specified.

S&F powder coated aluminium window and ventilator shutters (three track) fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, srews with powder coating of any colour (Thickness or powder coating not less than 50 micron) including stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples. and 3.0 mm th sheet glass ordinary quality plain and glazing Complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/walls

-do- as above but 110mm dia

S & F for PVC (SWR) bends of any radius with oval and access door of 75mm dia

-do- as above but 110mm dia

S&F for PVC (SWR) vent cowl of 110mm dia

M&L (SWG) gully trap 150mm setting and jointing with solvent cement.

M&L Rendering 15mm thick on Brick Work in Cement Mortar (1:4), finished Plastered Surfaces Even and Smooth with sponge finish using water proofing compound @3%, complete all as specified and as directed.

M&L for cement concrete as in sunken floor with M 15 mix using 20mm graded crushed stone aggregate including water proofing liquid @ 200ml per 50kg of cement finished even and smooth complete all as specified (WPC shall be measured separately)

Supply only liquid water proofing compound

M&L for preparation , laying and testing of elastomeric bituminous coating system based on bituminous emulsion, polymer and additive conformingn to ASTM C 836 (Dr Fixit Solyseal or equivalent of M/s Fosroc) over the substrate including application of one coat of primer (solyseal 1 : water 1) followed by two coats of solyseal applied @ 0.9 Kg/sqm/coat sandwiched with opern woven glass fibre of mesh 2mm x 2mm or PE based spun bound fabric of 40 gsm complete all as per manufacturer specification in sunken portion and as directed.

M&L for 40mm dia GI pipe heavy class fixed out from sunken portion for spout all specified and directed

M&L for guniting concrete as in chajjas etc complete all as spd and as directed.

Supply and fix in repairs for stainless steel plate rack of size 36 inch x 31 inch x 10 inch, made out of 0.63mm thick stainless steel sheet (Grade AISI 304 18/8), S S screws and round pipe, fixed to wall with screws complete all as specified and as directed. Make – Blue Star Silver Shine Cat No.KPR-315 or equivalent from Nirali/ Jain Brothers Sanitation Pvt Ltd (Jayna )as approved by GE.

Returning filling in including speading,leveling ,watering and well ramming in layer complete all as specified and directed by Engr-in-charge.

M&L removal of excavated Soil to a distance n exc 50m and depositing where directed.

PCC 1:3:6 type using 20 mm graded trap stone aggrgate in coping

M & L for providing reinforced cement concrete 1:2:4 Nominal Mix using 20 mm graded stone aggregate as beams , cantilevers, bressummers , lintel over 1.5 mtr span complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M&L formwork to side and soffits of floor or roof beam beam hauching, girder bressummers ,lintels cantilivers shelves including supports overhangs etc. also splays between floor and beams stc. complete all as specified and as directed.

S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing 9mm thick Acoustical board/tiles for insulation and Acoustic purposes, 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid including hangers 6 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long all as specified

M&L for TMT bar 10mm dia and over cut to length bend to shape required and binding with mild steel wire annealed not less than 0.9mm dia. complete all as specified and as directed by engr-in-charge.

M&L for TMT bar 6mm to 8mm dia as in stirrups cut to length bend to shape required and binding with mild steel wire annealed not less than 0.9mm dia. complete all as specified and as directed by engr-in-charge.

Material and labour 75 mm thick plain cement concrete (1:4:8) type C-2 (using 40 mm graded stone aggregate) as in the sub base of floor complete all as specified.

E/M portion

Taking down old point wiring & M&L for point wiring with 1.5 sqmm multistranded copper conductor cable of PVC insulated and unsheathed type alongwith 1.5sqmm PVC insulated unsheathed single stranded copper conductor cable for continous earthing in & incl casing / caping or PVC Pipes & accessories having ISI marked surface type to be fixed with proper screws/(MS steel strips if required) including hard PVC boards of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator setc for Note:- Screws used for fixing PVC boards, casing & caping ceilling rose square blocks etc should be nickel cadmium screws:-

One light point controlled by one switch

One light point controlled by two 2 way switches.

One fan point controlled by one switch & regulators

One bell point controlled by one switch

One socket 5 pin 5 Amps flush type on independent board

One socket 5 pin 5 Amps flush type on same board

M&L for point wiring with 2.5 sqmm single core multistranded copper conductor cable of PVC insulated and unsheathed type alongwith 2.5sqmm PVC insulated unsheathed single core multistranded copper conductor cable for continous earthing in & incl PVC casing / caping or PVC Pipes & accessories having ISI marked surface type to be fixed with proper screws/ (MS steel strips if required) including hard PVC boards/Boxes of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator etc for Note:-color coding to be followed as given R-Phase,B-Neutral & G- Earthing

S & F in repair submain wiring with cable insulated single core multistranded copper conductor cable 1100 volts 2x 4 sqmm drawn through & incl PVC casing caping / PVC conduit of suitable size alongwith 4.0 sqmm copper conductor cable for earth continuity. (Note : 2 runs of 4.0 sqmm cable, one run of 4.0 sqmm cable and one run of PVC casing capping will be measured as one RM).

S&F switch piano flush type single pole one way 5 Amps

S & F in repair switch piano flush type 250 volts,single pole two way 6 Amp Make- Havells/Legrand/leader/Crabtree

S&F bell push, flush type single pole 5 Amps

S&F bell electric, AC 230 volts, single pole

S&F switch socket combination 2 in 1, 5 Amps flush type

S&F switch socket combination 2 in 1, 15 Amps flush type

S&F ceiling rose surface type 65 X 50mm, isolated body with 3 terminals to be fixed on PVC block

S&F regulator electronic step type for ceiling fans suitable for AC 230 volts 50 Hz 1200 / 1400mm sweep

MCB DB SPN sheet metal enclosure double door suitable for mounting MCB 240 volts with 200 Amps rated busbar 8 way

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP , 5- 32 amp to fit in the MCB DB complete with connection testing and commissioning.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN ,32 amp to fit in the MCB DB complete with connection testing and commissioning.

Supply and fix in repair LED Fitting 18 Watts LED MODEL:LHEXBQP71NWO18 MAKE :Havells or Equivalent

Supply and fix in repair LED Fitting 9 Watts LED including provision of connections cable pvc unsheathed stranded copper conductor and pvc square block of size 80mmX80mm MODEL:LHEXBLP7IN1W009 MAKE :Havells /Philips/Bajaj/HPL

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. Make : ENDURAPEARLS35WLED757SASYTOPC of Havells/Philips/ Bajaj/ CG/Luker

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed.Note :- Old ceiling fan should be deposited at MES store.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m ®

M&L for earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6) mm thick burried buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level duly connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3,connected to earthing test point all as specified or indicated including testing on completion including excavation and earth work in any strata, PCC Chamber with cover, Charcoal and Salt as required & 15 mm Light Grade GI pipe from steel plate to DB in order to ensure satisfactory earth resistance result to the entire satisfaction of Engr-in-Charge.

S&F in repair Meter box 2mm thick MS sheet powdr coated of size1mtr x 1mtr X 0.25mtr split in two parts 0.4X 1 mtr on top for refixing the meters and .6X 1 mtr for fixing of MCCB and DB.The top portion should be provided with glass of size 10cm x 10cm infront of each meters to facilited recording of meter reading and including provision of wooden block of suitable size to fix the meters and DBs, door with locking arrangement and box to be fabricated such as the MCBs can be operated form out side including Removing and refixing of meters (4 Nos) . Note:rate quoted also includes fixing of the DB completely on angle frame with necessary cable for internal wiring in the DB,lugs insulators Etc and making good the disturdbed surface to match with the existing.

Supply,laying,jointing , testing and commisioning XLPE cable 1100 volts grade PVC insulated armoured & PVC sheathed with stranded aluminium conductor heavy duty ISI marked incl cable glands lugs bolts nuts washers etc to suit the cable size to be laid in trenches fixed along pole, LT pannel floor bore or through GI pipe laid under floors, Fixed, concealed in wall encased in GI pipe etc complete of following sizes including taking down old unserviceable over head conductors and insulators channels carefully as directed by Engineer in Charge

16 Sqmm x 3.5 Core

M & L for HDPE DWC pipe ISI Marked fixed on walls, ceilings or in floors, trenches etc. for cable protection of the following outer dia :- Make:-Infra/Supreme/Prince

40 mm dia

M&L for road cutting and making good with PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) complete all as directed by Enger -in- charge.

M & L of new Gl steel tube Light grade galvanized of size 80 mm dia with all fitting laid in trenches complete and all as specified and directed by Engr in charge. Make : Jindal/ Tata/ Prakash Surya/ Ravindra./Swastik

Supply and Lay pipe galvanised Medium class including fitting complete 40 mm dia

Supply and Lay pipe galvanised Medium class including fitting complete 25 mm dia

Supply and Lay pipe galvanised Medium class including fitting complete 20 mm dia

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all as specified and directed :-

(a) Soft / loose soil

(b) Hard / dense soil

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25 cm all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point of any type of excavation all as specified and directed by Engineer -in-Charge.

M&L for MS Work i:e includes material,cutting,welding,other process for shaping of material to get into required shape as per site requirment and fixing on site. Note: Earthwork will be measured and paid separately

M/S RENUKA CONSTRUCTIONS

H S TAKHI

DR J S CHADHA AND SONS