Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹88.4 LAccepted-AOC 27 19 F F D BLOCK CHATTARPUR EXTN SOUTH WEST DELHI DELHI 110075 | SOUTH WEST DELHI | DELHI | 110075 | L1 | Accepted-AOC Reasonable bidder | |
| 2 | L2₹90.9 L+₹2.5 L (2.83%)Rejected-Finance | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹94.8 L+₹6.5 L (7.31%)Rejected-Finance 18 MOTI BAGH BABYAL ROAD AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L3 | Rejected-Finance Not lowest | |
| 4 | Rejected-Technical 231 JAGGI GARDEN BALDEV NAGAR AMBALA CITY 134003 | AMBALA CITY | AMBALA | HARYANA | 134003 | - | Rejected-Technical Adverse remarks in Work load return |
Tender Value
₹1.3 Cr
EMD Value
₹2.0 L
Closing Date
4 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (AF) AMBALA
HQ CWE (AF) Ambala, Ambala Cantt-133001
PROVN OF CERTAIN E/M AND B/R WORKS SERVICES FOR OTM BLDGS AT AFS AMBALA UNDER GE (AF) AMBALA
2024_MES_642593_1
CWE/AF AMB/AMB-41/2023-24
Open Tender
Civil Works
Item Rate
270 days
AMBALA CANTT
For MES enlisted contractor Class B Category a (i) and for un-enlisted contractor refer NIT
7 documents required · 7 mandatory
₹1,000
GE (AF) AMBALA
₹2.0 L
Yes
2 Sept 2024
16 Feb 2024
6 May 2024
16 Feb 2024
4 May 2024
16 Apr 2024
16 Feb 2024 - 28 Feb 2024
Amount
Dismanting Asbestos cement (currugated, semicorrugated, etc.) sheets as in roof coverings complete all as specified & directed
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified & directed.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, gulley gutter and ridges fixed with self tapping screws complete all as specified & directed
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified & directed.
S&F false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) with semi perforated 2mm thick micro tegular edged or 10mm thick square edged GRG false ceiling tiles of size 595mm x 595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.05 to 0.75 as per IS 8225:1987, noncombustible as per BS 476 (part 4) -1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @120 gram per sqm including both sides) comprising of main-T runners of size 15mm x 32mm of length 3000mm, cross-T of size 15mm x 32mm of length 1200mm and secondary intermediate cross-T of size 15mm x 32mm of length 600mm to form grid module of size 600mm x 600mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 gram per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85mm x 25mm x 2mm. Glavanised iron perimeter wall angle of size 24mm x 24mm x 0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws complete all as specified & directed
S&F soiled PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixed at site on PVC frame as per specification and drawing complete all as specified & directed
S&F 5mm thick PVC sheet fillets of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame etc complete all as specified & directed.
Demolition of Plain cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including removal of debris outside MD land complete all as specified & directed
M&L machine cut Kota stone, 20mm to 25mm thick, slab flooring (size of stone slab shall not be less than 550mm x 550mm) laid as in floors over and including 15mm thick screed bed or bedding layer of cement mortar 1:6, set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified & directed
M&L kota stone slab 20mm to 25mm thick as in riser of steps, skirting, dado and pillar laid over & including 10 mm thick backing coat in cement mortar 1:3, set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified & directed
Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed
S&F rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe 290 (Gde E-165) complete all as specified & directed.
Taking down chowkhats or frames with shutter (without taking off shutters from the frame), area not exceeding 1.5 sqm each and removing from site, complete all as specified & directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame), area exceeding 1.5 sqm but not exceeding 4.00 sqm each and removing from site, complete all as specified & directed.
S&F factory made Box type steel windows double shutter (glazed and wire gauzed) with side hunges shutters, including box type hinges, steel handle fabricated type of each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos. for each leaf) duly welded, complete with glazing bars, dovetailed or welded, including MS fillets, including provision and welding of guard bars including one shop coat of red oxide primer over window frame & guard bras complete all as specified & directed. Notes: (i) Windows shall be fabricated as per drawing No. TD-219 Sh 1/3 to 3/3 and these drgs may be referred from GE office or from the office of CWE (AF) Ambala. (ii) Glazing, Wire cloth & MS guard bars shall be measured and paid separately . (iii) Painting to window shall be measured and paid separately however one shop coat primer included in quoted rates. (iv) Double shutter meant for providing glazed shutter as well as wire gauged shutter on outside & inside of the frame respectively. Both the shutters shall be measured as one unit. (v) Steel window shall comply with IS 1038-1983 &. Rolled steel sections for fabrication shall conform to IS 7452-1990
S&F steel ventilator with top hung shutters, factory made comfirming to IS 1038-1983 & IS 7452 - 1990 including hinges, peg stays with glazing bars etc with & including one shop coat of red oxide primer complete all as specified & directed. Note: - Glazing / wire cloth shall be measured & paid separately.
S&F galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire stapels complete all as specified & directed.
S&F sheet glass 3mm thick, ordinary quality, glazing with oil putty in squares not exceeding 0.50sqm in each pane fixed with oil putty or wooden beads including glazing pins/ spring clips wherever necessary complete all as specified & directed.
S&F 3mm thick figured glass, pin head type, glazing with oil putty in square not exceeding 0.50sqm in each pane fixed with oil putty or wooden beads including provision of glazing pins/ spring clips wherever necessary complete all as specified & directed
S&F Powder coated anodised aluminum door made out hollow aluminium section as mentioned below. Each door having 02 Nos. disk or D type handle 200 mm long, two Nos. aluminum tower bolts 200mm size, 01 No. mortice lock of six levers with key in duplicate, shutter shall be regulated by double action hydraulic floor door spring, shutter shall be partly glazed with 5mm thick tinted glass and partly panelled with 12mm thick prelaminated particle board fixed with glazing clips, rubber beading/ gasket, anodised aluminium beading, screws etc. complete all as specified & directed. (a) Chowkhat size : 100mm x 44mm x 1.60mm (b) Shutter vertical style : 100mm x 44mm x 1.60mm (c) Shutter lock rail : 150mm x 44mm x 1.60mm (d) Shutter bottom rail: 200mm x 44mm x 1.60mm Note: The item itself is complete for door including chowkhat, glazing/particle board & door fitting are included in quoted rates, any minor articles / door fitting if required for proper functioning of door is deemed to be included in quoted rates and nothing extra beyond this item shall be measured & paid.
S&F anodised aluminum window shutters with chowkhat made out hollow aluminium section suitable for aluminium shutter sliding, including glazing with 5.00mm thick tinted glass fixed with glazing clip, rubber beading and aluminium beading etc. complete all as specified & directed. (a) Chowkhat size : 100mm X 44mm X 1.60mm (b) Shutter member size : 100mm X 44mm X 1.60mm Note: The item itself is complete for window including chowkhat, glazing & necessary door fitting are included in quoted rates, any minor articles if required for proper functioning of window is deemed to be included in quoted rates and nothing extra beyond this item shall be measured & paid.
S&F door closer Aluminum extruded body type hydraulically regulated, designation No. 2, universal type, sutaible for door shutters of 701mm to 850mm width and of weight between 36Kg to 60 Kg complete all as specified & directed.
S&F mild steel work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified & directed
S&F rolled mild steel framed work as in door of angle or other sections with gusset plates, rails, braces etc, using ornamental design as approved complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and purpose made hinges or steel hanging door fittings exclusive of steel sheeting or other covering, running rails and guides and hanging, fastening and fixing complete conforming to Fe 410W, Gde E-250 quality'A' complete all as specified & directed.
S&F mild steel framed work as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified & directed.
S&F mild steel plain black sheet 1.00mm thick as in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified & directed.
Cutting holes in brick walls, built in cement mortar, depth exceeding half brick thick wall but not exceeding one brick thick wall for inserting hold fasts etc. and making good the dismantled portion in plain cement concrete 1:2:4 type B-1 & finished to match as per the existing finish complete all as specified & directed Notes:- (i) Depth of embedded portion of holdfasts or lugs shall be measured from the face of the jamb into the wall. (ii) The item shall not be operated if hold fast holes are required at new location.
Demolition of plain cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for (as in sunken floors, coping, benching, padding, etc.) inlcuding removing the debris outside the MD premises complete all as specified & directed.
M&L plain cement concrete(PCC) 1:2:4, type B-0, using 12.5mm graded mechanically crushed stone aggregate as in padding on roof to maintain the required slope & finished the surfaces even & fair complete all as specified & directed.
M&L rendering / screed bed 15mm thick in cement mortar 1:4 on concrete surface of roof / wall mixed with water proofing compound as per manufacturer's instructions, finishing the surface even & fair complete all as specified & directed. Note:- Water proofing compound shall be measured & paid separately.
M&L Atactic Polypropylene Polymeric(APP) water proofing treatment to roof, at any height, using membrane minimum 3 mm thick and weighting not less than 3.0 Kg per sqm, black finish reinforced with non-woven polyster matt (Weight not less than 150 gram per Sqm), with properties of high penetration and centre core consisting of 90 micron, high molecular high density polyethylene (HMHDPE) film consisting of five layers with thermo fusible finish laid by force application after applying compatible bitumen primer(confirming to IS 3384) at the rate of 0.30 litre per Sqm, torching over laps with a propane or butane gas torch with a over lap of 100 mm at the side on transverse direction and 150 mm at the ends on longitudinal direction and sealing including a tack coat of hot blown bitumen 85/25 @ 1.2 Kg per Sqm below APP, including finishing the surface with two coats of aluminum paint in camflage pattern @ 100 ml/sqm including removing/taking down of old APP complete all as specified & directed . Note: For Guarantee and Security deposit, refer Particulars Specifications
Dismantling of brick work built in cement mortar including all quoins, pillars etc. but excluding ashlar facings, dressed stone work and precast articles complete all as specified & directed.
M&L Brick work with sub class B, burnt clay bricks of old size, designation 75, straight or curved on plan exceeding 6 mtr mean radius, built in cement mortar 1:6, above or below GL complete all as specified & directed.
Description all as per BOQ item No 32.00 here-in-above but except bricks. Note: Old bricks retrieved from BOQ item 31.00 here-in-before shall be used after cleaning and washing.
Taking down cement plaster on brick or stone walls surfaces etc. including racking out joints, hacking for key, scrubbing down with water including removal of debries to distance exceeding not exceeding 500 mtr complete all as specified & directed.
M&L rendering 10mm thick in cement mortar 1:6 on any face (fair/other than fair face) of brick or concrete surface and finishing the surface with even and smooth without using extra cement complete all as specified & directed.
M&L rendering 5mm thick in cement mortar 1:3 on the soffits of slabs/chajjas/sunshade etc. and finishing the surface even & smooth without using extra cement complete all as specified & directed.
M&L rendering 15 mm thick in cement mortar 1:4 mixed with water proofing compound (WPC) as per manufacturer's instructions on fair faces brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed. Note : WPC Shall be meauired and paid separately.
M&L rough cast plaster including 15 mm thick rendering in cement mortar 1:3 on brick work or concrete surface all as specified in SSR Part -I clause 14.22 complete all as specified & directed. Notes : (i) Rough cast plaster finish shall be as follow :- After applying the under coat in cement mortar 1:3 and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggreagte (which is generally of size between 6mm to 12mm depanding on the texture required mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure the larger aggregate are throughly covered.
M&L two coats of oil bound distemper of approved shade/tint including reparinig with white wall care putty of any thickness as per site requirement (minimum 1mm thick) to achieve smooth finish, on old treated plastered surfaces of walls including preparation of surfaces complete all as specified & directed.
M&L preperation of newly plastered surface of ceiling/soffits and applying three coats of white lime wash over & including white wall care putty minimum 1mm thick complete all as specified & directed.
M&L applying two coats of 100% premium emulsion acrylic paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali and fungal resistance , dirt resisitance exterior paint of approved shade/tint(Company depot tinted), with silicon additives @1.43 Litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm and white wall care putty minimum 1mm thick on newly plastered surfaces of walls including preparation of surfaces complete all as specified & directed. Note: For guarantee & security deposit refer Particular specifications.
M&L applying two coats of 100% premium emulsion acrylic paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali and fungal resistance , dirt resisitance exterior paint of approved shade/tint(Company depot tinted), with silicon additives @1.43 Litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm on old plastered surfaces of walls including complete removal of existing treament and reparinig with white wall care putty of any thickness as per site requirement (minimum 1mm thick) complete all as specified & directed. Note: For guarantee & security deposit refer Particular specifications.
M&L two coats of oil bound distemper of approved shade/tint over & including one coat of alkali resistant primer and a layer of white wall care putty minimum 1mm thick to achieve smooth finish, on newly plastered surfaces of walls including preparation of surfaces complete all as specified & directed.
M&L preparation of old plastered surfaces of ceiling/soffits and applying two coats of white lime wash including repairing with white wall care putty of any thickness as per site requirement (minimum 1mm thick) complete all as specified & directed.
M&L preparation of new steel and iron based surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over & including one coat of red oxide primer complete all as specified & directed.
M&L preparation of old or previously treated steel and iron based surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified & directed.
M&L preparation of old painted or previously untreated wood and wood based surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.
M&L 25mm thick plain cement concrete(PCC) 1:2:4, type B-0, (using 12.5mm graded mechanically crushed stone aggregate) as in subbase to flooring complete all as specified & directed.
M&L 75mm thick plain cement concrete(PCC) 1:4:8, type D-2 using 40mm graded mechanically crushed stone aggregates, as in subbase of floors complete all as specified & directed.
M&L 75mm thick PCC 1:3:6, type C-1, using 20mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified & directed. Notes:- The unit rate quoted shall be deemed to include for providing the concrete in alternate bays not exceeding 3 mtr length. 12mm wide and 50mm deep joints between the bays shall be provided which shall be filled with mastic filling with hot bitumen 85/25 grade and 1:2 mix volume.
S&F self-coiling (push pull or manual type) steel rolling shutters 1.25mm thick lath conforming to IS 6248-1979, without ball bearing as specified in SSR Part - I including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position complete all as specified & directed.
S&F safety lever locks mild steel with 4 levers for rolling shutters complete all as specified & directed.
M&L reinforced cement concrete (RCC) M-20, nominal mix, using 20mm graded mechanically crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns ramp, slab side supprots, etc, basement slabs, under-reamed piles and mass concrete complete all as specified & directed.
M&L mild steel TMT bars 10mm dia and over, Fe500/Fe500D grade confirming to IS-1786, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.
M&L mild steel TMT bars 8mm dia and over upto & including 10mm dia, Fe500/Fe500D grade confirming to IS-1786, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups, spacer & binders complete all as specified & directed.
M&L Spike roiling to surface or making impression of expanded metal, using extra cement whilst the concrete is green complete all as specified & directed.
Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the premises to a distance exceeding 500 mtr complete all as specified & directed.
M&L coloured, non-skid, joint free, edge cut, ceramic tiles, 1st quality, 7mm to 8mm thick, square/rectangular, area of each tile exceeding 0.06sqm but not exceeding 0.11sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over & including 15mm thick screed bed or bedding layers in cement mortar 1:4 complete all as specified & directed.
M&L glazed ceramic coloured printed tiles of size 300mm x 450mm, 7mm thick as in dado/vertical surfaces, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with colour of tiles over & including 10mm thick rendering/backing coat in cement mortar 1:3 complete all as specified & directed.
M&L Vitrified ceramic tiles, coloured, light shade, 10 mm thick, square/ rectangular, polished, area of each tile not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over & including 15mm thick screed bed or bedding layers in cement mortar 1:6 complete all as specified & directed.
M&L Vitrified ceramic tiles, coloured, light shade, 10 mm thick, square/ rectangular, polished, area of each tile not exceeding 0.36 sqm as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over & including 10mm thick rendering/backing coat in cement mortar 1:4 complete all as specified & directed.
S&F in repair tubular curtain rail, aluminum anodized, 20mm dia complete all as specified & directed.
S&F in repair aluminium decorative type brackets suitable to hold the curtain rod with sofio phenol (lotto) and wooden round blocks suitable to curtain rod of 20mm dia, decorative type fixed with suitable steel screws and PVC cleats complete all as specified & directed.
M&L plain cement concrete(PCC) 1:2:4, type B-0, using 12.5 mm graded mechanically crushed stone aggregates as in lintels upto 1.5mtr clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork to complete all as specified & directed.
Taking up or down 15mm dia GI tubing as in surface/concealed laid/fixed in wall/floor/ceiling complete all as specified & directed.
Taking up or down 20mm dia GI tubing as in surface/concealed laid/fixed in wall/floor/ceiling complete all as specified & directed.
S&F galvanised mild steel water tubes 15 mm bore, medium grade, with all fittings, fixed to wall and ceiling or laid in floor complete all as specified & directed.
S&F galvanised mild steel water tubes 20 mm bore, medium grade, with all fittings, fixed to wall and ceiling or laid in floor complete all as specified & directed.
S&F PVC(SWR) pipes, 110mm dia single socketed in any length with rubber ring joints laid under floor or fixed on walls as soil waste/vent pipes including taking up or down existing PVC/CI pipe and connections complete all as specified & directed.
S&F PVC(SWR) pipes, 75mm dia single socketed in any length with rubber ring joints laid under floor or fixed on walls as soil waste/vent pipes including taking up or down existing PVC/CI pipe and connections complete all as specified & directed.
S&F PVC(SWR) bends any radius, 75mm bore with/without access door, complete all as specified & directed.
S&F PVC(SWR) bends any radius, 110mm bore with/without access door, complete all as specified & directed.
S&F in repair PVC(SWR) floor trap with and including, plain/single hole chromium plated grating including jointing to waste pipe with solvent cement, 75mm dia, complete all as specified & directed.
S&F PVC(SWR) multi-floor trap, plain with and including chromium plated grating including jointing with solvent cement, 75mm dia, including dismantling the damaged trap, complete all as specified & directed.
S&F in repair 75mm dia outlet PVC Nahani trap with grating as fixed complete all as specified & directed.
S&F in repair vitreous china wash down water closet pan (EWC pedestal pattern) size 530mm x 385mm x 390mm, white (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain or out going pipe and to flushing pipe including plastic water closet seat black with closed pattern , flat bottom and cover including MS CP or aluminum hinging device etc. complete all as specified & directed.
S&F in repair vitreous china squatting pan(IWC), Orissa pattern, 580mm x 440mm, white, with and including PVC ‘P’ or ‘S’ trap front or back inlet with integral foot rests excluding flushing cistern and flush pipe including connection to flush pipe and providing lime concrete bedding and making good to floor etc. complete all as specified & directed.
S&f in repair viterous china urinals, half stall type (back or corner walll types), approx size 59cm x 37.5cm, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screw pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified & directed.
S&F in repairs, viteous china urinal partition, white size 310mm x 700mm complete all as specified & directed.
S&F in repair vitreous china wash hand basin, white, flat back, size 550mm x 400mm including 32mm bore PVC waste pipe of suitable length, 32mm CP waste coupling & one pair of mild steel angle iron brackets of suitable size fixed as in counter slab complete all as specified & directed.
S&F in repair PVC low level flushing cistern, white, valveless syphonic action type 10 litre capacity with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connections to water supply pipe line and WC, complete all as specified & directed.
S&F in repair fancy type chromium plated 2 way bib tap 15mm dia with CP flange complete all as specified & directed.
S&F in repair 15 mm bore bib tap, fancy type, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed complete all as specified & directed.
S&F in repair 15 mm bore pillar tap, cast copper alloy, fancy type, chromium plated with capstan head, screwed down high pressure, with or without lettered “hot' or 'cold” with long screwed shank and flynut screwed complete all as specified & directed.
S&F in repair 15mm bore fancy type stop valve, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes complete all as specified & directed.
S&F in repair 15mm dia stop valves cast copper alloy chromium plated (Concealed type) fancy type, long shank and cup with capstan head and cup screwed both ends for iron pipe or for union complete all as specified & directed
S&F in repair soap dish, brass, chromium plated, size 160mm x 160mm x 90mm fixed with and including plugs with brass CP screws complete all as specified & directed.
S&F in repair toilet paper holder with flat recessed type stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified & directed
S&F in repairs PVC connection 600mm long with 2 nos PTMT check nuts, suitable for 15mm bore complete all as specified & directed
S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long fiexible tube and ABS wall hook including making connections and fixed in position complete all as specified & directed
Supply only integral water proofing compound ISI marked complete all as specified & directed
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling & fixing in opening as per specification & drawing given in SSR Part–II complete all as specified & directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channels having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame wedded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying & fixing in frame at site as per specification & drawing given in SSR Part –II complete all as sepcified & directed.
S&F aluminium anodised barrel tower bolts of extruded section, 150mm long complete all as specified & directed.
S&F aluminium anodised cast type handles 150mm long complete all as specified & directed.
S&F MS butt hinges medium weight, size 100mm complete all as specified & directed.
Dismantling water tanks from roof any description of capacity exceeding 250 ltr but not exceeding 500 ltr complete all as specified & directed.
S&F 500 ltr capacity rotational moulded polyethylene(PVC) water storage tank, HDPE, double layered, cylinderical type fixed and hoisted in position on roof, at any height, making connections with 20mm GI pipe inlets & outlets complete including locking arrangements and 20mm bore ball brass valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gram) complete all as specified & directed. Note: The water tank shall be placed nearest to the location / junction of roof beam / wall and shall not be placed at the middle of slab.
S&F in repair 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & directed.
Surface excavation not exceeding 30cm deep & averaging 15cm deep and getting out, in soft/loose type of soil complete all as specified & directed.
Excavation in over areas, not exceeding 1.5 mtr deep and getting out, in soft/loose type of soil complete all as specified & directed.
Excavation in over areas, exceeding 1.5 mtr but not exceeding 3.0 mtr deep and getting out, in soft/loose type of soil complete all as specified & directed.
Returning, filling in including spreading leveling watering and well ramming in layers not exceeding 25cm thick each in soft/loose type of soil complete all as specified & directed.
Removal of excavated soil to a distance not exceeding 50 mtr & depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified & directed.
M&L consolidated hardcore of broken stone or boulders, gauge not exceeding 63mm, deposited, spread and leveled in layers not exceeding 15cm thick each, watered and rammed to a true surface complete all as specified & directed
M&L formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified & directed.
M&L formwork to sides of pillars, posts, struts, piers, columns & stanchions; square, circular rectangular on plan or polygonal in shape for rough finished flat surfaces of concrete complete all as specified & directed.
M&L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete complete all as specified & directed.
M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified & directed.
M&L brick work with flyash burnt bricks (IS-13757), old size, Designation 75, straight or curved on plan exceeding 6mtr mean radius, built in cement mortar 1:6 below or above ground level complete all as specified & directed.
M&L reinforced cement concrete (RCC) M-25, design mix, using 20mm graded mechanically crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified & directed.
M&L reinforced cement concrete (RCC) M-25, design mix, using 20mm graded mechanically crushed stone aggregate as in columns, pillars, piers, posts and struts complete all as specified & directed.
M&L reinforced cement concrete (RCC) M-25, design mix, using 20mm graded mechanically crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5mtr span complete all as specified & directed.
M&L reinforced cement concrete (RCC) M-25, design mix, using 20mm graded mechanically crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified & directed.
M&L plain cement concrete(PCC) 1:4:8, type D-2, using 40mm graded mechanically crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.
M&L plain cement concrete(PCC) 1:2:4, type B-2, using 40mm graded mechanically crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.
M&L 100mm thick plain cement concrete(PCC) 1:2:4, type B-2 using 40mm graded mechanically crushed stone aggregate as in flooring & ramp including spike roiling to surface or making impression of expanded metal whilst the concrete is green complete all as specified & directed.
M&L 100mm thick plain cement concrete(PCC) 1:4:8, type D-2 using 40mm graded mechanically crushed stone aggregate as in sub base of floor complete all as specified & directed.
M&L rendering 15 mm thick in cement mortar 1:6 on fair faces brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed.
M&L preperation of newly plastered surface of ceiling/soffits and applying two coats of white lime wash complete all as specified & directed.
M&L water proofing treatment to roof slab complete all as specified here-in-below & as directed by Engineer-in-charge:- (i) Cleaning of dust, removal of all loose existing bituminious material manually and with heat torch gun to get smooth plain finished surface including removing of vegetation/plantation with no loose material on surface. Repairing all joints and cracks with Highly elastic Bituminous cold applied putty having penetration after setting upto 8mm. (ii) Levelling of surface to give proper slope will be done as per site requirements with Bituminous Mortar & Cold Emulsion cum waterproofing Liquid of water based bituminous emulsion. (iii) Creating SSD condition on surface with water. Prime the surface with acrylic modified bitumen with potable water in the ratio of 1:1 and apply @400gm per Sqm (As per Surface Conditions). (iv) Apply first coat of acrylic modified bitumen having elongation 200% conforming to ASTM-C-412 & having crack bridging of 8mm confirming to ASTM-C-836 with tensile strength after 7 days 0.50mm conforming to ASTM-C-412 with no diluation of water on primed surface while the surface is still tacky with consumption of 700gm per Sqm.
Item No. 122.00 continued...../- (v) Laying Geotex of 45 GSM/ Fibre mesh simultaneously and paste it properly with overlap of 50mm. Allow the first coat to dry for 10 hrs to 12 hrs. (vi) Apply second coat on cured first coat with consumption @ 700gm per Sqm in opposite direction of first coat by Brush or Roller. Allow it to dry for 10-12 hrs. (vii) Apply third coat with consumption @ 700gm per Sqm. Ensure final curing time of 36 hrs before allowing/ carrying out any further work. (viii) Conduct ponding test for minimum 7 day after applying two coats of single component , UV Resistant Elastomeric Exterior Acrylic Weather resistant water proof coating having elongation of 300% after curing of 14 days confirming to ASTM D- 6083-for UV Protection of Bituminous Elastomeric Acrylic Emulsified Liquid Membrane to give long life and prevent its deterioration from sunlight. Notes:- (i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators only duly approved by GE in writing. (ii) For guarantee & security deposit refer Particular specifications.
M&L damp proof course to horizontal or vertical surface including necessary equipment and applying evenly a coat of blown type bitumen primer at the rate of 0.30Kg to 0.50 Kg per sqm including supply & laying of polythene film 50 micron thick complete all as specified & directed.
M&L forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ for 100mm thick concrete slab/hardstanding complete all as specified & directed.
Excavation in trenches, not exceeding 1.5mtr wide and not exceeding 1.5mtr in depth; for foundation, laying/taking out pipes/cables etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10sqm on plan & not exceeding 1.5mtr in depth and getting out, in soft/loose type of soil complete all as specified & directed.
Removal of excavated soil to a distance exceeding 1500 mtr but not exceeding 5000 mtr including loading- unloading into vehicles and depositing where directed and spreading & levelling complete all as specified & directed.
M&L consolidated hardcore of broken bricks, gauge exceeding 63mm but not exceeding 100mm, deposited, spread and leveled in layers not exceeding 15cm thick each, watered and rammed to a true surface complete all as specified & directed
Dismantling of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc complete all as specified & directed.
M&L 60mm thickness M-30 grade machine pressed precast concrete interlocking paver block, any shape and size conforming to IS 15658-2006, with grey cement and pigment, laid over & including fine sand cushioning of 25mm consolidated thickness complete all as specified & directed.
M&L plain cement concrete(PCC) 1:2:4, type B-1, using 20 mm graded mechanically crushed stone aggregates as in roof kerbs or mud stops, rounded or chamfered on edges including necessary formwork to complete all as specified & directed.
M&L 150mm thick plain cement concrete(PCC) 1:2:4, type B-2 using 40mm graded mechanically crushed stone aggregate as in hardstanding laid in panels including necessary formwork complete all as specified & directed.
M&L forming construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified & directed.
M&L forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ for 150mm thick concrete slab/hardstanding complete all as specified & directed.
Excavation in trenches, not exceeding 1.5mtr wide and exceeding 1.5mtr but not exceeding 3.0 mtr in depth; for foundation, laying/taking out pipes/cables etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10sqm on plan and exceeding 1.5mtr but not exceeding 3.0 mtr in depth and getting out, in soft/loose type of soil complete all as specified & directed.
M&L plain cement concrete(PCC) 1:2:4 type B-1 (using 20mm graded mechanically crushed stone aggregate) in surface channels and drains including necessary formwork complete all as specified & directed.
M&L Brick work with sub class B, burnt clay bricks of old size, designation 75, straight or curved on plan exceeding 6 mtr mean radius, built in cement mortar 1:4, above or below GL complete all as specified & directed.
M&L precast reinforced cement concrete 1:2:4, type B-1 (using 20mm graded mechanically crushed stone aggregate) as in landings, cover slabs (for man holes/drain etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified & directed. Note: Reinforcement shall be measured & paid seperately.
M&L plain cement concrete(PCC) bed 1:4:8, type D-2 using 40mm graded mechanically crushed stone aggregates to drain pipes of 150mm bore including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified & directed. Note: The rates include for any necessary shuttering and supports to concrete and for laying beds to falls.
M&L 150mm bore reinforced concrete pipes, class NP2 laid and jointed as in trenches complete with collars complete all as specified & directed.
M&L Construction of Septic tank, 25 users, single compartment as per STD drawings complete all as specified & directed. Note: The Septic tank shal be executed as per STD drawings bearing No. CEJZ/STD-263/90, sheet 1/9 to 9/9. The drawings may be referred from office of GE office. All the provisions shown in drawings are deemed to be included in quoted rates and nothing extra shall be paid on account of this item. The Excavation & eathwork shall be in any type of soil. The removal of surplus soil shall be to a distance exceeding 500 mtr.
Construction of Soakage well 1.8 mtr dia & 3.0 mtr deep(effective depth) as per STD drawings complete all as specified & directed. bearing No. CEJZ/STD-301/90, sheet 1/4 to 4/4. Note: The Soakage well shall be executed as per STD drawings bearing No. CEJZ/STD-301/90, sheet 1/4 to 4/4. The drawings may be referred from office of GE office. All the provisions shown in drawings are deemed to be included in quoted rates and nothing extra shall be paid on account of this item. The Excavation & eathwork shall be in any type of soil. The removal of surplus soil shall be to a distance exceeding 500 mtr.
Taking down copper/aluminium point wiring (light, fan, bell, socket or power) complete, including taking out/down of unserviceable fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, bell push, call bell, light fitting etc., taking credit and making good disturbed surfaces of walls/floors/ceilings and keeping serviceable light fittings in safe custody for reuse complete all as specified & directed .
M&L concealed point wiring with Flame retardant low smoke(FRLS), PVC insulated unsheathed cable 1.5 sqmm with multistranded copper conductor, 1100 volt, drawn through in and including non metallic rigid PVC conduit not less than 20mm bore medium grade, with fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc as in wall/ceiling/roof etc with provision of new sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness(duly painted with two coat of anticorrosive paint outside & aluminium paint inside) with decorative laminated sheet top cover 3mm thick including Flame retardant low smoke(FRLS), PVC insulated, unsheathed, multistranded copper earth conductor 1.5 sqmm connected to common earth and earth dolly for one light / fan point controlled by one way switch 5/6 Amp complete all as specified & directed.
Description all as per BOQ item No. 143.00 here-in-above but for one socket outlet point 5/6 amp controlled by one way switch on the same board.
Description all as per BOQ item No. 143.00 here-in-above but for one socket outlet point 5/6 amp controlled by one way switch on the independent board.
Description all as per BOQ item No. 143.00 here-in-above but for bell point controlled by one bell push 5/6 Amp on the independent board complete all as specified & directed.
M&L concealed point wiring with Flame retardant low smoke(FRLS), PVC insulated unsheathed cable 2.5 sqmm with multistranded copper conductor, 1100 volt, drawn through in and including non metallic rigid PVC conduit not less than 25mm bore medium grade, with fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc as in wall/ceiling/roof etc with provision of new sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness(duly painted with two coat of anticorrosive paint outside & aluminium paint inside) with decorative laminated sheet top cover 3mm thick including Flame retardant low smoke(FRLS), PVC insulated, unsheathed, multistranded copper earth conductor 2.5 sqmm connected to common earth and earth dolly for one socket outlet point 15/16 amp controlled by one way switch on the independent board complete all as specified & directed.
M&L in repair concealed sub main wiring with four single core FRLS, PVC insulated, unsheathed cable, 1100 volts grade, 4 sqmm nominal cross sectional area stranded copper conductor and one single core green FRLS, PVC insulated, unsheathed 4 sqmm stranded copper conductor as earth continuity cable drawn through in & including non metallic rigid PVC conduit medium grade not less than 25mm bore including accessories concealed in wall/floors/roof etc including cutting chases in wall/ceiling and making good the disturbed surfaces to match with existing surface complete all as specified & directed.
M&L in repair concealed sub main wiring with two single core FRLS, PVC insulated, unsheathed cable, 1100 volts grade, 4 sqmm nominal cross sectional area stranded copper conductor and one single core green FRLS, PVC insulated, unsheathed 4 sqmm stranded copper conductor as earth continuity cable drawn through in & including non metallic rigid PVC conduit medium grade not less than 25mm bore including accessories concealed in wall/floors/roof etc including cutting chases in wall/ceiling and making good the disturbed surfaces to match with existing surface complete all as specified & directed. Note for BOQ Item No. 148.00 & 149.00 :- Five / Three runs copper cable alongwith conduit shall be measured as one unit.
S&F switch piano, flush type single pole, one way 6/5 Amp complete all as specified & directed
S&F socket outlet 2 in 1, 3 pin, 5 amp flush type complete all as specified & directed
S&F switch piano, flush type, 15 amp, single pole, one way complete all as specified & directed.
S&F socket outlet 2 in 1, 5 pin, 15 amp flush type complete all as specified & directed
S&F ceiling rose 65mm x 50mm three terminals 230 volts complete all as specified & directed
S&F stepped type electronic fan regulator flush type on existing phenolic laminated sheet complete all as specified & directed
S&F bell push 5 amp flush type complete all as specified & directed
S&F call bell ding dong type 230 volt, single pole complete all as specified & directed
S&F LED lights fitting 1x20 watt, 220volt, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed.
S&F LED luminaire 600mm x 600mm, 35/36 watt, 220 volt, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified & directed
S&F in repair distribution board double door type (for incoming MCCB & outgoing MCBs) TPN 4 way vertical type sheet steel powder painted with bus bar neutral link & earth bar with IP 43 degree of portection flushing in wall including connecting up all incoming and outgoing cables/circuit wiring complete all as specified & directed.
S&F in repair MCB three pole and neutral 415 volts, 63 Amp, 10 KA complete all as specified & directed.
S&F in repair MCB 63 Amp, SPN, C curve 240 volts, 10 KA complete all as specified & directed.
S&F in repair MCB 5 to 40 Amp, SP, C curve 240 volts, 10 KA complete all as specified & directed.
S&F heavy duty, exhaust fan, single phase, 230/240 volt, 300mm sweep, steel body, 1400 RPM, totally enclosed heavy duty motor with copper winding including mounting brackets fixing on frame including S&F MS sheet 1.00mm thick as louver shutter for exhaust fan with all accessories fixed on wall and making connetions with twisted copper flexible wire 23/0.0076mm complete all as specified & directed.
Taking down old unserviceable ceiling fans and depositing to the MES store with proper documentation complete all as specified & directed.
S&F ceiling fans complete with blades, down rods and accessories, 230 volt, 1200mm sweep, minimum air delivery 210 CFM with service value 6.00 BEE, 5 star rated without remote with brushless direct current motor (BLDC) hanging, connecting with existing point complete all as specified & directed. Note: Cost of writing MES No./SM No. on fan is included in quoted rates.
M&L in repair earthing complete with galvanized steel earth plate electrode 600mm X 600mm, 6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of earth plate not less than 1.5 mtr below ground level surrounded from all sides by 15cm thick packed layer of charcoal dust & common salt filled in alternate layers and electrode connected to GI earth lead wire 4.0mm dia upto 7.5mtr long by means of bolts, nuts, check nuts and washers of galvanized iron and connection to earthing test point & earth dolly & watering pipe 1.5 mtr long medium grade GI 20mm bore including protection pipe upto 7.5 mtr long GI light grade 15mm bore, including wire mesh, funnel, lugs, salt, charcoal dust, excavation in soft/losse soil, returning filling & removal of surplus soil upto 50mtr, pit chamber shall be of PCC 1:2:4 type B1 using 20 mm graded mechnically crushed stone aggregates and pit cover slab 80mm thick Precast RCC 1:2:4 type B-1 using 20 mm graded mechnically crushed stone aggregates reinforced with XPM weighing not less than 4Kg/sqm including necessary form work complete all as shown in electrical plate No 3 of SSR part-I, including testing on completion at site complete all as specified & directed. Notes :- On testing if the earth resistance is not obtained, earthing will be generated at no extra cost , till the desired earth resistance is obtained. The chamber shall be constructed atleast 1.5 mtr away from the earth electrode.
S&F in repair single pole & neutral, sheet metal enclosure with socket plug top with a two pin and earth plug and socket concealed in wall complete including one single pole MCB 20 Amp, 240 volts complete all as specified & directed.
S&F in repair industrial plug and socket 32 Amp 5 pin 8 module having protection IP 54, including MCBs 4 pole duly fixed in wall complete all as specified & directed.
M&L concealed point wiring with Zero Halogen Flame Retardant(ZHFR), PVC insulated unsheathed cable 1.5 sqmm with multistranded copper conductor, 1100 volt, drawn through in and including stove enamelled ERW conduit not less than 20mm bore heavy duty, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with provision of new sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness(duly painted with two coat of anticorrosive paint outside & aluminium paint inside) with decorative laminated sheet top cover 3mm thick including Zero Halogen Flame Retardant(ZHFR), PVC insulated, unsheathed, multistranded copper earth conductor 1.5 sqmm connected to common earth and earth dolly for one light point controlled by one way switch including taking down of existing flame proof point wiring complete all as specified & directed.
Description all as per BOQ item No. 170.00 here-in-above but for one ceiling fan/exhaust fan point controlled by one way switch 16 Amp on the independent board.
Description all as per BOQ item No. 170.00 here-in-above but for one socket outlet point 16 amp controlled by one way switch on the independent board.
M&L concealed point wiring with Zero Halogen Flame Retardant(ZHFR), PVC insulated unsheathed cable 2.5 sqmm with multistranded copper conductor, 1100 volt, drawn through in and including stove enamelled ERW conduit not less than 25mm bore heavy duty, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with provision of new sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness(duly painted with two coat of anticorrosive paint outside & aluminium paint inside) with decorative laminated sheet top cover 3mm thick including Zero Halogen Flame Retardant(ZHFR), PVC insulated, unsheathed, multistranded copper earth conductor 2.5 sqmm connected to common earth and earth dolly for one socket outlet point 25 Amp controlled by one way switch on the independent board including taking down of existing flame proof point wiring complete all as specified & directed.
M&L in repair Flame proof weather proof switch socket & plug combined 16 Amp, 250 volt, (2 Pole + earth) complete all as specified & directed.
M&L in repair Flame proof weather proof switch socket & plug combined 25 Amp, 250 volt, (2 Pole + earth) complete all as specified & directed.
M&L in repair Flame proof weather proof ceiling fan regulator complete all as specified & directed.
M&L in repair concealed sub main wiring with four single core FRLS, PVC insulated, unsheathed cable, 1100 volts grade, 4 sqmm nominal cross sectional area stranded copper conductor and one single core green FRLS, PVC insulated, unsheathed 4 sqmm stranded copper conductor as earth continuity cable drawn through in & including mild steel conduit medium grade not less than 25mm bore including accessories concealed in wall/floors/roof etc including cutting chases in wall/ceiling and making good the disturbed surfaces to match with existing surface complete all as specified & directed. Notes:- Five runs copper cable alongwith conduit shall be measured as one unit.
S&F in replacement LED light fitting 2x16 watt flame proof, CMRI certified recommended for gas/ vapour group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified & directed.
S&F flame proof, heavy duty, metalic body with metalic blades, legs, ISI marked energy efficient exhaust fan, 457mm sweep,1440RPM, CFM 4000 with louvers and connecting up including provision of three core flexible copperwire of size 1.5 sqmm from ceiling rose to exhaust fan including making hole on wall grouting bolts nuts washers etc complete all as specified & directed.
S&F flame proof ceiling fans complete with blades, down rods, electronic regulator and accessories , 230 volt, 1200 mm sweep, minimum air delivery 210 CFM with service value 6.00 BEE five star rated complete all as specified & directed.
S&F in repair three phase, 4 pole, flame proof weather proof receptable with MCB 32 Amp & top plug having protection IP 54 duly fixed in wall complete all as specified & directed.
S&F in repair switch flame proof rotary type with termination box in LM6, 16Amp, single pole 250Volt complete all as specified & directed.
S&F in repair switch flame proof rotary type with termination box in LM6, 25Amp, single pole 250Volt complete all as specified & directed.
S&F security light bracket with 25mm bore GI tubing, light grade, cut and bent to shape required 1.2mtr long fixed with including bends, flat iron clamp made of FI 40x6mm, nuts, bolts, washers etc duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified & directed.
S&F MCCB 160 Amp 4 pole 36KA with adjustable thermal release fixed magnetic proteciton complete all as specified & directed.
S&F energy efficient LED flood light fitting 120watt, input voltage 230volt AC,50HZ with ingress proteciton IP 65, CRI>70, PF>0.95 minimum 25000 burning hours. LM-80, lumen efficacy > 100 lumen/watt, THD>20, CRCA housing including all fixing arrengment like clamps, nuts bolts, washers,120watt LED lamp with all accessories pre-wired and connecting with twin core twisted flexible copper conductor cable with all necessary staging complete all as specified & directed.
S&F energy efficient LED security light fitting 35watt, input voltage 230volt AC,50HZ with ingress proteciton IP 65, CRI>70, PF>0.95 minimum 25000 burning hours. LM-80, lumen efficacy > 100 lumen/watt, THD>20, CRCA housing including all fixing arrengment like clamps, nuts bolts, washers,35watt LED lamp with all accessories pre-wired and connecting with twin core twisted flexible copper conductor cable with all necessary staging for fixing at any locations including taking down the old unservicable fittings complete all as specified & directed.
Taking out old unservicable XLPE LT cable of size 35/50 sqmm complete all as specified & directed. Notes : (i) Excavation/earth work shall be measured and paid separately. Serviceable bricks will be kept aside for re-use and unserviceable bricks shall be credited to contractor.
Supply, laying and testing LT cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core complete all as specified & directed.
Supply, laying and testing LT cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 70 sqmm 3.5 core complete all as specified & directed.
Supply, laying and testing LT cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 185 sqmm 3.5 core complete all as specified & directed.
S&F busbar chamber of size 600mm x 600mm x 450mm suitable of 3 phase 433 volt outdoor type fabricated out of 3.15mm thick MS sheet with 300Amp rated aluminium busbar 4 Nos. PVC sleeves (coloured red, yellow, blue and black) with suitable loking arrangments and four legged angle iron stand made of angle iron of size 40x40x6mm duly grouted in and including foundation in PCC 1:2:4 type B1 using 20mm graded stone aggregates alongwith all necessary cable connection, lugs and cable glands including applying two coats of synthetic enamel paint (of approved tint) over & including one coat of red oxide zinc chorme primer complete all as specified & directed.
M&L for taking out/shifting/Re-routing and relaying the existing under ground LT XLPE cable size upto 95 Sqmm 3.5 Core, PVC insulated and overall sheathed aluminium conductor, connecting and testing for complete all as specified & directed. Notes:-(i) Excavation/earth work shall be measured & paid separaterly. (ii) Serviceable bricks will be kept aside for re-use and unserviceable bricks shall be credited to contractor.
M&L sand cushioning to cable with a layer of sand 8 cm deep before laying the cable and 15 cm deep after laying the cable (punned down to 18 cm depth after laying and stretching of cable ) complete all as specified & directed.
Supply and laying old size, common burnt clay, sub class 'B' bricks, designation 75, laid flat & dry for protection of electric cable in trenches, adjacent to each other, perpendicular to central axis of cable complete all as specified & directed.
M&L making bore through treanchless boring to road/cement path/hard standing/Taxi track for providing GI pipe 80mm both end socketed for passing armoured cable including making good the disturbed surface complete all as specified & directed. Note:- GI pipe shall be measured & paid separately.
S&F GI tubing 80 mm bore light grade galavanised with all fitting complete for cable protection under road crossing/on pole/wall or similar position complete all as specified & directed.
Laying only of old serviceable bricks for protection of cable in trenches for under ground cable protection complete all as specified & directed. Note: The bricks retrieved at BOQ item No. 188.00 & 194.00 shall be used under this item.
S&F MCCB 160 Amp 415 volt 4 pole 36KA with adjustable thermal release fixed magnetic proteciton complete all as specified & directed.
S&F MCCB 250 Amp 415 volt 4 pole 36KA with adjustable thermal release fixed magnetic proteciton complete all as specified & directed.
S&F end jointing kit for 1100 Volt grade suitable for outdoor type terminal heat shrinkable type joints with jointing material for 3.5 core XPLE armoured aluminium conductor cable of size 185 Sqmm complete all as specified & directed.
S&F end jointing kit for 1100 Volt grade suitable for outdoor type terminal heat shrinkable type joints with jointing material for 3.5 core XPLE armoured aluminium conductor cable of size 70 Sqmm complete all as specified & directed.
S&F end jointing kit for 1100 Volt grade suitable for outdoor type terminal heat shrinkable type joints with jointing material for 3.5 core XPLE armoured aluminium conductor cable of size 35 Sqmm complete all as specified & directed.
M&L earthing complete with galvanized steel earth plate electrode 600mm X 600mm, 6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of earth plate not less than 1.5 mtr below ground level surrounded from all sides by 15cm thick packed layer of charcoal dust & common salt filled in alternate layers and electrode connected to GI earth lead strip 32mm x 6mm upto 7.5mtr long by means of bolts, nuts, check nuts and washers of galvanized iron and connection to earthing test point & earth dolly & watering pipe 1.5 mtr long medium grade GI 20 mm bore including protection pipe upto 7.5 mtr long GI light grade 40mm bore, including wire mesh, funnel, lugs, salt, charcoal dust, excavation in soft/losse soil, returning filling & removal of surplus soil upto 50mtr, pit chamber shall be of PCC 1:2:4 type B1 using 20 mm graded mechnically crushed stone aggregates and pit cover slab 80mm thick Precast RCC 1:2:4 type B-1 using 20 mm graded mechnically crushed stone aggregates reinforced with XPM weighing not less than 4Kg/sqm including necessary form work complete all as shown in electrical plate No 3 of SSR part-I, including testing on completion at site complete all as specified & directed. Notes :- On testing if the earth resistance is not obtained, earthing will be generated at no extra cost ,till the desired earth resistance is obtained. The chamber shall be constructed atleast 1.5 mtr away from the earth electrode.
For Credit Schedule refer tender documents. The amount of credit schedule shall be deducted from total quoted amount of BOQ to arrive contract sum.
NAVIN KUMAR
Gupta Enterprises
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .