Provision of electric motor

Amount

Replacement of M.S.Black pipe heavy (C class) confirming to IS: 1239 Part-1(1990) with required nut bolts & packing sheet etc complete as required of following Dia

Providing, laying , testing & commissioning of 'C' class heavy duty MS pipe confirming to IS 3589/IS 1239 including welding fittings like elbows, tees, flanges, tapers, nut bolts, gaskets etc. and fixing the pipe on the wall/celing with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as reqd.

250 mm dia (9.5 mm thick)

300 mm dia (9.5 mm thick)

350 mm dia (9.5 mm thick)

Providing, installation, testing & commissioning of valve of non-retirn valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts, washers etc as reqd.

NRV 250 MM

NRV 300 MM

Replacement of M.S. Flange with required nut bolts & packing sheet etc complete as required of following Dia:-

75 mm (10 mm thickness)

150 mm (10 mm thickness)

250 mm (20 mm thickness)

300 mm (25 mm thickness)

Replacement of M.S. Bend with required nut bolts & packing sheet etc complete as required of following dia.

75 mm (5 mm thickness) length 0.3 m

250 mm (8 mm thickness) length 0.5 m

300 mm (8 mm thickness) length 0.75 m

Repairing of the following dia/models of storm water pump i/c dismantling of pump set from base frame by cutting of nut bolts of suction side and delivery side and holding of delivery line by dead flange and thrust support and suction line by holding with tripod arrangement i/c loading/unloading by skilled labour, to & fro cartage along with replacement of its parts/accessories i/c gland plate/spilt gland, MS Lock nut with Lock washer, Keys of impeller & coupling, stud of Gland plate and all packings i/c oiling, greasing, replacement of required body studs & nuts, coupling tyre, required machining works for proper balancing of complete pump unit and minor repair works and dynamic balancing with existing motor i/c installation, testing and commissioning on full load etc. as required complete in all respects.

Having suction of 150 mm (Model No SHM 150/26)

Replacement of shaft sleeve of following dia/models of storm water pump etc. as required.

Having suction of 150 mm (Model No SHM 150/26)

Replacement of bearing of following dia/models of storm water pump etc. as required.

Having suction of 150 mm (Model No SHM 150/26)

Replacement of Impeller of following dia/models of storm water pump etc. as required.

Having suction of 150 mm (Model No SHM 150/26)

Providing & filling of Transformer oil in Auto Transformer Starters.

Replacement of heavy duty Can Cylinderical type power factor corrector capacitors as reqd at site.

P & F of 12 stages Intelligent Power Factor Controller (APFC) Relay complete as reqd.

Supply & fixing of Capacitor duty contactor (AC Control) 415 V 3Ph 50 Hz , 1NO+NC suitable for 15 KVAR.

S/F of compartmentalized cubical type panel board duly powder coated made out of 16 SWG M.S sheet with insulated 600 amp. Aluminium bus bar interconnection hard strip arrangement for mounting for switch gears, changeover switches, MCCB i/c making the foundation brick work/angle iron frame on floor / wall with proper locking arrangement , CT,PT meter etc complete as required at site

Upto 30 to 60 cm

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

100 A, 16 KA,TPMCCB

200 A, 25 KA,TPMCCB

250 A, 25 KA,TPMCCB

630 A, 50 KA,TPMCCB

S/I/TC of oN load manually operating handle change over switch (confirming to 60947-3, IS/IEC 60947-3) suitable for fixing in existing cubical panel board including drilling holes in cubicla panel , making connetions etc. Complete as reqd

4 Pole 630 Amp.

SITC of 30 W LED flood light luminiare fitted with lens, made of pressure die cast aluminium housing and toughened glass cover complete with the following specifications as reqd. (a) Total wattage system = 30 watt +/-3% (b) luminaire efficacy >= 100 Lm/w (c) Power Factor = .95 (F) Protection class - IP-66

Supply of XLPE insulated PVC sheathed Al. Conductor Un-Armoured cable 1.1 KV grade confirming to IS-7098 of following size. (a) 2X6 Sqmm

Wiring for light/fan point/exhaust fan point call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, with modular switch, modular plate,suitable size GI box and earthing the point with 1.5sqmm FRLS PVC insulated copper conductor single core cable etc as required. Group C

Supply installation testing and commissioning of Electrical Horizontal centrifugal pump set with non clog /mf impeller to handle storm / mixed / sewage water with having min. discharge of 800 m3/hr at head min 7 mtr, RPM 960 having suction and delivery size 350 mm or 300 mm dia ,mounted on a common base frame coupled with Min. 50 HP or suitable rating (IE-2) three phase, TEFC AC , 415 volts, 50 Hz supply electrical Motor energy efficient (IE2) complete as required. Mounted on a common base frame as Casing C I, Impeller C I, Shaft & sleeve (SS) 40 C 8 complete with coupling guard and foundation bolts etc. as reqd.