Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.5 LAccepted-AOC 205 PARSHAV VIHAR PLOT NO 50 1 P EXTN PATPARGANJ DELHI 110092 | DELHI | EAST DELHI | DELHI | 110092 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹12.2 L+₹26,173 (2.19%)Rejected-Finance 10 SUBASH COLONY DEF LAB ROAD RATANADA JODHPUR 342006 RAJ | JODHPUR | JODHPUR | RAJASTHAN | 342006 | L2 | Rejected-Finance Not Being Lowest | |
| 3 | L3₹12.5 L+₹51,733 (4.33%)Rejected-Finance | L3 | Rejected-Finance Not Being Lowest | |
| 4 | L4₹13.2 L+₹1.3 L (10.7%)Rejected-Finance | L4 | Rejected-Finance Not Being Lowest |
| Sl No | Description | Qty | Unit | SANJEEV ENTERPRISES L1 | PANWAR ELECTRICALS L2 | GURBUX SINGH AND CO. L3 | Deep Contractor L4 |
|---|---|---|---|---|---|---|---|
| 1.00 | Material and Labour for periodic inspection/servicing to be carried out in every three months, and making/keeping the cranes serviceable, for cranes of 2 Ton/ 5 Ton capacity installed in various bldgs, including the following:-
(i) LONG TRAVEL MOTION AND CROSS TRAVEL MOTION
(a) Checking Gear box oil level and filling with required oil and rectification of leakages if any.(Note: Gear Oil shall be measured and paid separately at supply only rates) (b) Brake adjustment (c) Checking of Long travel & cross travel wheel for any noise/malfunctioning.
(d) Checking grease of Geared couplings, nut tightening and replacement of grease nipple every three months. (e) Checking of oil in Hydraulic thruster brake, rectification of leakages if any and filling with required quantity of oil.(Note: Brake Oil shall be measured and paid separately as supply only rates) (f) Checking of electric motor connections, insulation resistance value etc. (g) Checking the cut-off at extreme ends with the limit switch.
(j) Checking and greasing of shaft pedestal. | 18 | Each Job | 3,000 ₹54,000 Lowest | 3,000 ₹54,000 Lowest | 14,000 ₹2,52,000 | 3,000 ₹54,000 Lowest |
| 1.01(ii) HOIST MOTION (a) Checking Gear box oil level and filling with required oil and rectification of leakages if any.(Note: Gear Oil shall be measured and paid separately at supply only rates) (b) Brake adjustment (c) Checking of main bearings of the Rope Drum including greasing the same (d) Checking grease of Geared couplings and nut tightening. (e) Checking of oil in Hydraulic thruster brake, rectification of leakages if any and filling with required quantity of oil.(Note: Brake Oil shall be measured and paid separately at supply only rates) (f) Checking of electric motor connections, insulation resistance value. (g) Checking wire rope for any damage & greasing the rope. (h) Adjustment of the rotary limit switch. (j) Checking of Bearing of the Hook and greasing the same. (iii) ELECTRICAL PANEL (a) Checking the contactors for overheating or flashing. (b) General checking of contacts and connections. (c) Cleaning of control panels and checking of connections. (d) Checking of connections of VVVF drives/other drive, calibrating VVVF drive to get smooth movement & maximum efficiency / other drives for smooth functioning of the same. Note: Nos of Cranes 2 Ton -04 Nos and 5 Ton -02 Nos. | |||||||
| 2.00 | Material and labour for load testing and provide certification from authorised crane inspector all as specified for the EOT/HOT crane 2 ton capacity by dead weight at site, to be carried out 110% of rated capacity. Test load and slings for conducting the full load and 10% over load test will be arranged by the contractor at site.
Note :- i) Dead load shall be arranged by the contractor on his own arrangment and no extra payment shall be made by the department.
ii) Tools and tackels shall be provided by the contractor at site for testing purpose without any extra cost to department.
iii) Rates quoted against this item shall also be deemed to be inclusive for shifting/transporting the load from place to place and unloading which will be arranged by the contractor including required ropes, manpower etc for handling the load required for load testing. | 4 | Each Job | 4,500 ₹18,000 | 4,000 ₹16,000 Lowest | 10,000 ₹40,000 | 5,000 ₹20,000 |
| 3.00 | All as per serial item No 2.00 above but 5 ton capacity. | 2 | Each | 9,500 ₹19,000 | 8,000 ₹16,000 Lowest | 10,000 ₹20,000 | 12,000 ₹24,000 |
| 4.00 | Dismantling of existing reduction gear box with device for hoist/CT/LT motion traverse for carrying out replacement of following unserviceable Parts / Carrying out misc repair and refixing the gear box after checking alignment of brake drum & motor and motor & gearbox , in existing position, complete all as specified and directed:-
(a) Replacing the worn out shaft seals & bearing (b) Replacement of internal cover gasket, (c) Replecment of Gear coupling with nuts & bolts complete. | 2 | Each Job | 5,500 ₹11,000 Lowest | 11,000 ₹22,000 | 9,000 ₹18,000 | 9,000 ₹18,000 |
| 5.00 | Taking down unserviceable flame proof motor of capacity 1 HP to 3 HP at elevated height and transporting to civil workshop, dismantling, rewinding the defective flameproof squirrel cage induction motor of single/three phase, any make of any duty or any class of insulation, removing burnt out winding from stator/rotor, rewinding with suitable gauge of super enameled copper wire of approved make and replacing insulation materials, varnishing with approved make, heating on electric oven till to get required insulation resistance value,replacing terminal block, re-assembling, testing and commissioning complete all as specified and directed by Engr-in-Charge. | 2 | Each | 3,000 ₹6,000 | 4,000 ₹8,000 | 2,000 ₹4,000 Lowest | 3,000 ₹6,000 |
| 6.00 | All as per serial item No. 5.00 above but capacity 4 HP to 5 HP. | 1 | Each | 5,500 ₹5,500 | 5,100 ₹5,100 | 3,000 ₹3,000 Lowest | 5,500 ₹5,500 |
| 7.00 | Supply and fixing in replacement plumber block with bearing complete, suitable for LT/CT motion of 2 Ton to 5Ton capacity EOT crane, complete all as specified and directed by Engr-in-Charge. | 1 | Each | 2,300 ₹2,300 | 5,500 ₹5,500 | 1,800 ₹1,800 Lowest | 3,200 ₹3,200 |
| 8.00 | Supply only Gear oil 80W 90 OMD for topping up/ replacing complete all as specified and directed by Engr-in-Charge. Make:- Castrol/Super Tech/Bosch/Volvoline/Power oil or equivalent.
Note :-Empty containers will be deposited with Engr-in-chagre/JE for payment and will be returned after RAR/FB. | 20 | Ltr | 280 ₹5,600 Lowest | 300 ₹6,000 | 300 ₹6,000 | 290 ₹5,800 |
| 9.00 | Supply only all purpose Grease for lubrication complete all as specified and directed by Engr-in-Charge. Make:- Castrol/Super Tech/Bosch/Volvoline/Power oil or equivalent. . | 10 | Kilogram | 450 ₹4,500 | 300 ₹3,000 | 200 ₹2,000 Lowest | 400 ₹4,000 |
Tender Value
₹13 L
EMD Value
₹26,000
Closing Date
26 Mar 2026, 6:00 pmClosed
CWE Ambala
Headquarter Commander Works Engineer Ambala Mansfield Road Ambala Cantt
CA NO CWE/AMB/UTILITY-58 OF 2025-26 REPAIR/MAINT OF EOT/HOT CRANES AND ALLIED WORK UNDER GE (UTILITY) AMBALA CANTT
2026_MES_747113_2
CWE/AMB/UTILITY-58 OF 2025-26
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
270 days
Ambala Cantt
All as per tender documents
9 documents required · 9 mandatory
₹500
GE(Utility) Ambala
₹26,000
Yes
29 May 2026
13 Mar 2026
28 Mar 2026
13 Mar 2026
26 Mar 2026
21 Mar 2026
13 Mar 2026 - 17 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Material and Labour for periodic inspection/servicing to be carried out in every three months, and making/keeping the cranes serviceable, for cranes of 2 Ton/ 5 Ton capacity installed in various bldgs, including the following:-
(i) LONG TRAVEL MOTION AND CROSS TRAVEL MOTION
(a) Checking Gear box oil level and filling with required oil and rectification of leakages if any.(Note: Gear Oil shall be measured and paid separately at supply only rates) (b) Brake adjustment (c) Checking of Long travel & cross travel wheel for any noise/malfunctioning.
(d) Checking grease of Geared couplings, nut tightening and replacement of grease nipple every three months. (e) Checking of oil in Hydraulic thruster brake, rectification of leakages if any and filling with required quantity of oil.(Note: Brake Oil shall be measured and paid separately as supply only rates) (f) Checking of electric motor connections, insulation resistance value etc. (g) Checking the cut-off at extreme ends with the limit switch.
(j) Checking and greasing of shaft pedestal. | 18 | Each Job | - | - |
| 1.01 | (ii) HOIST MOTION
(a) Checking Gear box oil level and filling with required oil and rectification of leakages if any.(Note: Gear Oil shall be measured and paid separately at supply only rates) (b) Brake adjustment
(c) Checking of main bearings of the Rope Drum including greasing the same (d) Checking grease of Geared couplings and nut tightening.
(e) Checking of oil in Hydraulic thruster brake, rectification of leakages if any and filling with required quantity of oil.(Note: Brake Oil shall be measured and paid separately at supply only rates) (f) Checking of electric motor connections, insulation resistance value.
(g) Checking wire rope for any damage & greasing the rope.
(h) Adjustment of the rotary limit switch. (j) Checking of Bearing of the Hook and greasing the same.
(iii) ELECTRICAL PANEL
(a) Checking the contactors for overheating or flashing. (b) General checking of contacts and connections. (c) Cleaning of control panels and checking of connections. (d) Checking of connections of VVVF drives/other drive, calibrating VVVF drive to get smooth movement & maximum efficiency / other drives for smooth functioning of the same.
Note: Nos of Cranes 2 Ton -04 Nos and 5 Ton -02 Nos. | - | - | - | - |
| 2 | Material and labour for load testing and provide certification from authorised crane inspector all as specified for the EOT/HOT crane 2 ton capacity by dead weight at site, to be carried out 110% of rated capacity. Test load and slings for conducting the full load and 10% over load test will be arranged by the contractor at site.
Note :- i) Dead load shall be arranged by the contractor on his own arrangment and no extra payment shall be made by the department.
ii) Tools and tackels shall be provided by the contractor at site for testing purpose without any extra cost to department.
iii) Rates quoted against this item shall also be deemed to be inclusive for shifting/transporting the load from place to place and unloading which will be arranged by the contractor including required ropes, manpower etc for handling the load required for load testing. | 4 | Each Job | - | - |
| 3 | All as per serial item No 2.00 above but 5 ton capacity. | 2 | Each | - | - |
| 4 | Dismantling of existing reduction gear box with device for hoist/CT/LT motion traverse for carrying out replacement of following unserviceable Parts / Carrying out misc repair and refixing the gear box after checking alignment of brake drum & motor and motor & gearbox , in existing position, complete all as specified and directed:-
(a) Replacing the worn out shaft seals & bearing (b) Replacement of internal cover gasket, (c) Replecment of Gear coupling with nuts & bolts complete. | 2 | Each Job | - | - |
| 5 | Taking down unserviceable flame proof motor of capacity 1 HP to 3 HP at elevated height and transporting to civil workshop, dismantling, rewinding the defective flameproof squirrel cage induction motor of single/three phase, any make of any duty or any class of insulation, removing burnt out winding from stator/rotor, rewinding with suitable gauge of super enameled copper wire of approved make and replacing insulation materials, varnishing with approved make, heating on electric oven till to get required insulation resistance value,replacing terminal block, re-assembling, testing and commissioning complete all as specified and directed by Engr-in-Charge. | 2 | Each | - | - |
| 6 | All as per serial item No. 5.00 above but capacity 4 HP to 5 HP. | 1 | Each | - | - |
| 7 | Supply and fixing in replacement plumber block with bearing complete, suitable for LT/CT motion of 2 Ton to 5Ton capacity EOT crane, complete all as specified and directed by Engr-in-Charge. | 1 | Each | - | - |
| 8 | Supply only Gear oil 80W 90 OMD for topping up/ replacing complete all as specified and directed by Engr-in-Charge. Make:- Castrol/Super Tech/Bosch/Volvoline/Power oil or equivalent.
Note :-Empty containers will be deposited with Engr-in-chagre/JE for payment and will be returned after RAR/FB. | 20 | Ltr | - | - |
| 9 | Supply only all purpose Grease for lubrication complete all as specified and directed by Engr-in-Charge. Make:- Castrol/Super Tech/Bosch/Volvoline/Power oil or equivalent. . | 10 | Kilogram | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.13 MB
TenderU58Retender.pdf
Tender Documents • 0.52 MB
BOQ_846989.xls
BOQ • 1.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .