ROOF PAINTING TO EXISTING ROOF AND ALL WEATHER PROOF EXTERIOR PAINTING INCLUDING TREATMENT OF EXTERNAL SURFACES IN CERTAIN BUILDINGS AT MIL STN DHARAMSHALA

Amount

Taking down cement plaster including backing etc from brick/stone walls / concrete surfaces including raking out joints, hacking for key , scrubbing down with water etc complete all as specified and directed

Dismantling plain or corrugated steel sheets any gauge thickness including Nanital or similar pattern roof covering including ridges complete all as specified and directed.

Rendering cement plaster 15mm thick in cement mortar 1:4 on stone masonary surfaces or surfaces other than fair faces of brick wall o, surface finished even and smooth without using extra cement, all as specified.

Supply only Liquid water proofing compound, complete all as specified.

Preparation of new plastered surfaces or un plastered, previously undecorated wall surfaces and applying two coats of cement base paint , complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed. Note : All treatment shall be done by using mechanical means.

Exterior Painting work including complete removal of existing treatment till top surface of existing plaster and crack filling with crack seal upto 3mm where required and making good/smooth the surface with wall putty with silicon additives and sanding these surface for removal of loose particles and applying one coat of water proof primer on walls and chajjas with 10% dilution of water and applying two coats of 100% acrylic smooth emulsion exterior grade with silicon additives and anti-algal propertie, complete all as specified. Note : All treatment shall be done by using mechanical means.

0.63 mm thick, galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with with L-type or J-type or cranked hook bolts , in roofs, walls etc. with grade of zinc coating 275 gms per sqm complete all as specified and directed.

0.63 mm thick, galvanised, plain mild steel sheeting as in ridges, hipe, valley gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 gms per sqm complete all as specified and directed.

Preparation of new or previously un-treated CGI/PGI or other roof steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Note : Paint and primer shall be done with spray gun.

Preparation of old painted CGI/PGI or other steel roof surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. Note : Paint shall be done with spray gun.

Preparation of old painted CGI/PGI or other steel roof surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed. Note : Paint shall be done with spray gun.

Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 19 of tender doucments.

vivek and co

Ms Sunil Kumar

AGGARWAL ASSOCIATES

m/S Varun Gupta

greenstone construction

KISHAN CONTRACTOR

ABHAY ELECTRICAL

Eshaan Construction Co.