SPL REPAIRS TO BLDG NO. P-55 AND BLDG NO. T-9-10A AT HQ 4 CROPS UNDER GE (SOUTH) TEZPUR

Amount

Demolition cement concrete (unreinforced) n'exc 15 cm thick (below or above ground level).Complete all as specified and directed.

Demolition of cement Concrete (Reinforced) of any description and in any position not otherwise specifically provided for all as directed.

Demolition of old damaged existing water proofing compound on RCC roof of any description and specification and cleaning the surface thoroughly all as specified and directed

M & L 15mm thick in cement mortar (1:4) on existing roof surface true to level after applying cement slurry @3Kg/Sqm and applied coat of hot blown bitumen of graded 85/25 @1.2 Kg/Sqm .Complete all as specified and directed.

Supply and laying 3mm thick APP based Polymeric membrane of approved manufacture with weight not less than 3.60 Kg per Sqm reinforced with non-woven polyster febric weight not less than 150gms per Sqm.The overlap shall be not less than 100mm on transverse direction and 75mm on longitudinal direction and sealing overlaps and Applying evenly one coat of aluminium paint @ 0.10 liter per square metre over the APP based polymeric membrane complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B0(12.5 mm graded aggregate) as in flooring finished even and smooth without using extra cement.

M&L 75mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection,foot path and finishing surfaces of concrete even and smooth including making construction joint at interval of 1.2 mtr & filled with bituminous filler complete all as specified and as directed.

M&L for form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports, overhangs and similar works for rough finished surface of concrete complete as specified.

Reinforced cements concrete 1:1.5 :3 type B-1 (20 mm graded stone aggregate) in RCC band.Complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.Complete all as specified and directed.

Ditto all as per item ser No 10 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Taking down chowkats or frames not exc 1.5sqm each with shutters (without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.Complete all as specified and directed.

Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.Complete all as specified and directed.

Taking down of shutters of any description exc 1.00 Sqm and n.exc 2.00 sqm each .Complete all as specified and directed.

Taking down of shutters of any description n.exc 1.00 Sqm and each .Complete all as specified and directed.

Supplied and fixed Pressed steel frames of size 165 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., Complete all as specified and directed.

All as per item No 16 above but of size 105 x 60mm

S&F 35mm Flush shutters, solid core construction, with block board core and plywood, commercial type on both sides complete all as specified and directed.

S & F 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. Divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutters as specified in SSR Part I, section 8, clause 8.23(a).

Supply and fix 30mm thick second class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. The sizes of members of shutters as per IS-1003 (Part-2), kiln seasonable and chemically pressure treated and fitted to chowkhats complete all as specified and directed. (Note : wire cloth wil be measured and paid separately).

Supply and fix 30mm thick second class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. The sizes of members of shutters as per IS-1003 (Part-2), kiln seasonable and chemically pressure treated and fitted to chowkhats complete all as specified and directed. (Note : Glass wil be measured and paid separately).

S&F solid PVC door frame of size 50mm X 47mm, made out of 5mm plain colour PVC sheet reinfoced with M.S. square tube, supply and fixing in opening as per specification.

Supply and fix, 30 mm thick factory made solid panel PVC shutters (conforming to IS : 4020) consisting of frame made out of mild steel tubes of 19 gauge and size 19 mm x 19 mm for stiles and 15 mm x 15 mm for top and bottom rails. Mild steel frame shall have a coat of steel primer and covered with PVC channel size 30 mm x 50 mm forming stiles and 5 mm thick 75 mm wide PVC sheets for top rail, lock rails, bottom rail on either side and 10 mm thick 20 mm wide cross PVC sheets as gap insert for top rail and bottom rail, panneling of 5 mm thick PVC sheet to be fitted in mild steel frame welded/sealed to the stiles and rails with 30 mm wide x 5 mm thick PVC sheet beading in either side and joint together with solvenet cement adhesive etc an additional 5 mm thick PVC strip of 20 mm width to struck on the interior side of the ‘C’ channel using PVC solvent adhesive including and fitted to PVC door frame all as specified and directed.

S&F 2nd class hard wood small fitting such as brackets of any type latch and hinge blocks,shaped door and window stops and the like including all necessary labours articles exe. 200cu.cm and n.exe 200 cu.cm each

Dismanting timber scantling 40 Sqcm and over in secion in any position in framed work or unframed work

All as per Ser Itme no 25 above but In fillests, rails , posts, refters and purlins etc under 40 sqcm in section unframed work

M&L 2nd class Hard wood in scantling fixed clean swan in framed work or unframed work all as specified and directed.

M&L 2nd CL Hard wood plain fillets square, rectangular or triangular in section clean sawn sectional area exe 6 sqcm & n exe 13 sqcm fixed with nails

S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.25mm size of cross tee and main tee 26x24x0.25mm and 32mm x 24mm x 0.25mm with 1.5mm dia double GI suspentor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel tress any type of tress

Dismantling asbestos cement corrugated semi corrugated etc sheets in roof covering.

S&F 0.5mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour ,tensile strength of 550Mpa as in roof covering including end of creep length 200 mm to 250 mm etc fixed with self tapping screw complete all as specified and as directed. Note :-Creep length shall be measured and paid in same item.

All as per item No 31 above but plain sheet for ridge ,gutter,eaves board etc fixed with self tapping screws complete all as specified and as directed.

Dismanting wall /ceiling board (Fibre pulp insulation) or insulation boards any thickness including cover filters

Dismanting timber boarding of any description fixed in any position

Supply and fix, steel windows with side hung shutless including box type hinges with steel handle and steel peg stay, complete with glazing bars, donetailed or welded all as soecified and directed.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, Complete all as specified and directed.

S&F MS framed works such as grills grating etc with ends of bars shouldered and for rivetted in forged into spikes, framed guard bars, railing and similar work confiring to Fe-410-0 or Fe 310-0 complete all as specified and directed

S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed.

S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.Complete all as specified and directed.

S&F in repairs Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.Complete all as specified and directed.

S&F 100 mm size Butt hinges medium weight cold rolled mild steel.complete all as specified and as directed.

S&F 75 mm size Butt hinges medium weight cold rolled mild steel.complete all as specified and as directed.

S&F 150mm long extruded aluminium alloy handles fabricated type, anodised.

S&F 100mm long extruded aluminium alloy handles fabricated type, anodised.

S&F Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy.

S&F Aluminium anodised barrel tower bolts of extruded section 100 mm long and fixed with screws.

S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws.

S&F in repair 300mm ordinary mild steel rat tail rod pattern springs including roller and roller plate complete.

S&F Mild steel hold fasts fixed with MS screws, all conforming to Fe410-0.

Hacking out old broken glass any thickness, size, quality or description from wooden / metal frame works, glazed with putty or fixed with beads

S&F 3mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified.

S&F in repairs chromium plated tubular towel rail 20mm dia D type 60cm long between flanges including a pair of CP brass brackets, complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding,(but not backing) removing serviceable tiles to store and rubbish off the premises.

M&L for Machine cut kota stone slab flooring 18-22 mm thick over 15mm thk cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for Machine cut kota stone slab 18-57 mm thick in riser of steps, skirting, dado over 10mm thk cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

S&F non skid eramic coloured tiles 7 to 8mm thick (square/rectangular)area of each tile esceeding 0.18 Sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointd in white or coloured cement to match over 15mm tick creed bed in cement mortar (1:4) complete all as specified and as directed

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36sqm, in Skirting/Dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4.

M&L Non - skid Ceramiccoloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm tick creed bed in cement mortar (1:4) complete all as specified and as directed

M&L Coloured Glazed ceramic tiles 450 x 300 mm x 7 to 8mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm screed bed in Cement mortar (1:4) complete all as specified and directed.

M&L 20mm thick Granite stone (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match over with shade of granite complete all as specified and as directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) for wall linin12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shed of granite over and using 10mm thick cement plater in CM (1:4) complete all as specified and as directed.

Demolition of reed lathing, single or double including battens and plasters or checken wire lathing

Taking down cement plaster with/without tiling on brick or concrete surfaces including racking out joints hacking for keys scrubbing down with water etc and disposal of debris outside MD land all as specified and as directed.

M & L Rendering 15mm thick on surface of brick work/concrete surface in CM 1:6 and is to be finished even and fair without using extra cement complete all as specified and as directed.

M & L Rendering 15mm thick in CM 1:4 on other than fair face of brick or concrete surface, surface to be finished even and fair with out using extra cement all as specified and as directed.

M & L 5mm thick rendering in cm(1:3) in ceiling or concrete surfaces and finished the surface even & smooth without using extra cement.

M&L 15mm thick rendering in CM (1:4) on one side of lathing finishedd even and smooth without using extra cement including 0.71mm chicken wire and size of mesh 12mm

M & L, 10mm thick rendering in C.M. (1:6) on brick work finished even and smooth without using extra cement .

M&L Applying two coats of Oil bound distember to newly plastered wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall all as specefied and directed.

M&L Applying two coats of Oil bound distember to wall over a coat of 1 mm layer wall care putty over a coat of primer including complete removal of existing treatment all as specefied and directed..

M&L for complete removal of existing treatment of external walls along with preparation of wall surface using wall care putty to smooth the existing surface and applying two coat of apex/ weather coat water proofing paints over two coats of approved paints damp shield or equivalent over a coat of primer etc complete all as specified and directed.

M&L for Newly plastered surfaces of external wall and applying two coats of apex /weather coat paints over two coats of approved Paints damp shield or equivalent over a coat of primer etc complete all as specified and directed.

M&L for two coats of white wash on newly plastered wall surfaces including preparation of surfaces complete all as specfied and directed.

M&L for three coats of white wash on newly ceiling surfaces including preparation of surfaces complete all as specfied and directed.

M&L for three coats of white wash on Old ceiling surfaces including preparation of surfaces complete all as specfied and directed.

M & L for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces over 10cm width or girth including preparation all as specified and as directed.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces over 10cm width or girth including preparation all as specified and as directed.

M&L preparation of old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint.

M&L preparation of old painted surfaces of wood and wooden based surfaces over 10cm width of girth and applying one coat of synthetic enamel paint.

M&L preparation of new wooden surfaces n.exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer.

Taking up or down, steel tubing 15mm bore including connection complete all as directed.

S&F galvanised steel tubing 15mm bore, medium grade, with all fittings and fixed complete to walls and ceiling or laid in floor etc but concealed including cutting chassing and making good complete all as specified and directed.

Taking up or down, steel tubing 20mm bore including connection complete all as directed.

S&F 20mm bore galvanised steel water tubing medium grade with all fittings & fixed complete to wall or ceiling or laid in floors.

S&F in repairs 15mm bore fancy type chronium plated bib taps with crutch of butterfly handle screwed down for iron pipes.

S&F in repairs pillar taps CP fancy type screwed for iron pipe and fixed 15mm bore.Complete all as specified and directed.

S & F in repairs vitreous china wash basin flat back of size 550x400mm including brackets,waste fittings and pipe,cutting for and pinning in ends or brackets,but excluding taps,chain and plug and porcelain stopper complete all as specified.

S&F in repairs PVC connection pipe with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs 15mm dia stop valve fancy type chromium plated with long shank and cup (conealed rype) screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

Supply & fix in repairs 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs chromium plated shower rose with or with out swivel joints any joints, any size including fixing to steel pipe or union complete all as specfied and directed.

S&F in repairs door stopper in repairs of aluminium alloy body with double bush type and tongue, over all length of cover plate 150mm, anodised, with hard drawn steel spring, fixed in floor.

Supply & fix in repair 20mm dia anodised aluminium alloy curtain rod with two Nos of socket complete for doors/window opening all as specified and directed.

S&F vitreous china squatting pan orissa pattern size 580X440 mm white, with integral foot rest complete all as specified and directed.

Supply and fix, as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets complete all as specified and directed.

S&F in repairs vitreous china bowl urinal flate back, size 465x355x265mm white with grating and union PVC discharge pipe including cement motor bedding in cm 1:2 against wall including wooden plugs brass long screws pointing along urinal back in cement all as specified and directed.

Taking down PVC SWR / rainwater pipes (any size or pattern) incl all fittings, heads shoes, bends, swan necks, etc.

S&Fin repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in flooor with clamps.

S&F in repairs 110mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints fixed to wall or laid in floor complete all as specfied and directed.

S&Fin repairs PVC SWR 75 mm Bends complete all as specfied and directed.

S&Fin repairs PVC SWR 110 mm Bends complete all as specfied and directed.

S& in repair FPVC (SWR) junction single (single 'T') equal or unequal 110mm bore.

S&F in repair PVC(SWR) junction single (single 'T') equal or unequal 75 mm bore.

S&F 110mm bore PVC vent cowl complete all as specified and directed.

S&F in repairs 32mm bore Waste coupling of PTM (half or full threaded) (Minimum weight 32mm 45gms/40mm-60 gms) complete all as specified and directed.

S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and dircted.

Dismantling chain link fencing of any thickness or mesh fixed with steel fillet and nut bolt not exc 4 kg per sqm.complete all as specified and as directed by Engineer-in-Charge.

Dismantling RCC posts or struts of any section including taking out embedded portion in natural ground and making good to disturbed natural ground complete all as specified and as directed by Engineer-in-charge.

Excavation in post holes in soft/loose soil n. exc 0.50 cum each, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25 cm including removing of surplus spoil to a distance n exc 50 mtr and making good the disturbed surfaces all as specified and directed by Engineer-in-Charge.

M&L reinforced cement concrete Type B1 (1:2:4) (20mm graded aggregate) in slab supported on walls, beams, and columns, in floors, roof, landings balconies, canopies, eck slab and in shelves and the like all a specified and diredted

Formwork to soffits of suspended slabs such as cooking slab and similar work; not exceeding 200mm thick (Horizontal or sloping) all as directed.

Material and labour for PCC ( 1:4:8), type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed by Engineer-in-charge.

Material and labour for PCC (1:3:6), type C-1 using 20 mm graded stone aggregate as in posts (including caps & bases) complete all as specified and as directed by Engineer-in-charge.

Demolition of Brick work or stone/boulder masonry, build in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Material and labour for old size fly ash /concrete bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.

M&L for old size fly ash /concrete best quality bricks, straight or curved on plan exc 6 m mean radiushalf brick wall built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.

Supply and fixing mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or rivetting etc. and similar works conforming to Fe-290 (Gde E-165) complete all as specified and directed by Engineer-in-Charge. Note:- 1. Flat iron for securing wire mesh to be provided is to measured in this item. 2. Machine made screw bolt 10mm dia exceeding 5cm and not exceeding 10cm long shall be measured and paid seperately under appropriate item of this Schedule as supply only .

Supply only 10mm dia, exceeding 5cm and not exceeding 10cm long machine made mild steel screw bolts with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with one washer and one hexagonal or square nut, complete all as specified & directed by Engineer-in- charge.

Supply only galvanised mild steel chain link fencing of 3. 15 mm dia (10 gauge) mild steel wire , 75 x 75 mm mesh size complete all as specified and directed by Engineer-in-Charge.

Fixing only chain link fencing including line wise, any mesh, size and type to any type of standards, rails, straing bolts, round bars etc. including provission of binding wire 10mm dia complete all as specified and directed by Engineer-in-Charge. Note:- Supply only line wire 10mm dia bar shall be measured and paid separately under appropriate item of this schedule.

S&F mild steel round bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clip all as specified & directed by Engineer-in-Charge.

Supply and fixing galvanised, 2 strand steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing and tying at crossings with and provision of galvanized mild steel wire, staple or steel pins, etc complete all as specified and directed by Engineer-in-Charge. (Each line of wire shall be measured and paid separately ). Note:- Rate quoted includes cutting down shurbs, bushes, sarkands or branches of trees. Nothing extra is admissible on this account.

S&F second class hard wood plain solid straight in chowkhats and framed rebated on the solid rounded or chemfered put togather with glue pinned at jounts including making rebate for fixing second shutter as per site requirements.Complete all as specified & directed by Engineer-in-Charge.

S&F composite 100% solid wood plastic complete (single extended process) material with density not less than 780 kg/cum and plastic wood as in chowkhat.Complete all as per manufacturer instruction.

Taking down carefully unserviceable point wiring (light,fans,socket etc) complete incl battens and fittings such as switch, ceiling rose,light fittings, regulatos, socket etc and making good disturbed surface of wall/floor etc complete all as specified.

Taking down DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified.

Taking down sub main wiring of any size complete and making good disturbed surface of walls/floors etc complete as specified.

M & L for taking down fans ceiling cable ends dismantling blades and removing fan and keeping in safe custody for reuse.

Taking down old U/S LED light fittings any type and size

M & L for point wiring for one light /fan point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FRLS cable controlled by one way switch, drawn with rigid PVC concealed conduit with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity connected to common earth dolly and complete with modular pressed steel tarminal box and front cover plate to mount modular switch, sockets, regulators etc fixed flush to wall of not less than 1.6 mm thick for mounting of fittings such as switch, socket and speed regulator with 3 mm thick Laminated bakelite sheet (Make' Hylum') cover all as specified and directed.Note: Cost of modular box, modular front and back plate are including in rate of point wiring.

All as per Ser item No.132 above but for 5 amps socket on same board with other switches

All as per Ser item No.132 above but for 5 amps socket on independent board.

All as per Ser item No.132 above but with 2.5 sqmm cables for 15 amps switch socket combination outlet on independent board complete all as specified and directed.

M & L for point wiring for one light point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FRLS cable controlled by one way switch, drawn through PVC Casing Capping with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity connected to common earth dolly and complete with modular pressed steel tarminal box and front cover plate to mount modular switch, sockets, regulators etc fixed flush to wall of not less than 1.6 mm thick for mounting of fittings such as modular type with 3 mm thick Laminated bakelite sheet (Make' Hylum') cover all as specified and directed. Note: Cost of modular box, modular front and back plate are including in rate of point wiring.

All as per Ser item No.136 above but with 2.5 sqmm cables for 15 amps switch socket combination outlet on independent board complete all as specified and directed.

S&F of modular switch flush type, 6 Amp. SP, one way ,1 module all as directed specified. Make- Anchor/ Havells/Bajaj/ CG

S&F of modular socket outlet, 3 pin, 6 Amp, flush type 2 module all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG

S&F in repair of modular socket outlet, 3 pin, 6/16 Amp flush type 2 module with modular switch, 16 Amp flush type 1 module all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG

S&F in repair of Ceiling rose 3 phase, PVC/ Polycarbonate body all as directed/ specified.

S&F of modular Fan Regulator step type 2 module ,120W all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG

Supply and fix Circuit/Sub Main Wiring with 2x4.0 Sqmm PVC insulated, FRLS, copper cable 1100 volts grade stranded copper conductor cable drawn through and including PVC concealed conduit with all fittings and accessories including PVC box (IS-14772) and 1 X 2.5 Sqmm stranded PVC unsheathed copper cable for earth continuity connected to common earth dolly.

All as per Ser item No.143 above but 2x6.0 sqmm+1x4.0sqmm earth wire

S&F PVC angular holder polycarbonate as specified and directed.

Flame proof point wiring with 1.5 Sqmm (nominal Area), 1100 Volts grade, PVC insulated FRLS multi stranded unsheathed copper conductor cable with 1 Sqmm earth wire in and including ERW rigid steel heavy duty conduit, ISI marked with all flame proof conduit fittings, accessories and junction boxes as per site requirement for one light point controlled by one switch complete all as specified and directed. Make of Cable : Havell’s / Plaza / Finolex / L&T.

Flame proof-weather proof rotary switch, single pole, on & off, with cable termination box in LM 6 of 16 Amps rating 250 volt

Flame proof-weather proof rotary switch-socket and plug combination in LM6, (3 pole and earth) with cable termination enclosure box in LM6 of 25 Amps rating 500 Volts.

S&F flame proof-weather proof LED fluorescent tube light fittings, 1 x 20 Watt, 4' long, including all accesories complete and necessary flame proof flexible metallic conduit tested by CMRS Dhanbad and conforming to IS 2069 (Part I) of 1984. Cate No. 1272 of Make Crompton

Flame proof-weather proof distribution board SPN 8 way consisting of MCB SPN 40 Amp- 01 No (Incoming) and MCB SP 6-10 Amp -08 Nos (Outgoing) Make Shyam or Eqvt Flexpro/Sudhir all as specified and directed.

Supply and fix Flame proof bulk head fitting 2 x 26 W CFL.Complete all as specified and directed.

Supply and fixing wall mounting industirial socket incl top plug with suitable straight plug, 380 to 415 volts, TPN, 4 poles (3P+N+E) , 32 Amps, Tempra Pro IP 67 to used as 3 phase industrial load mounting on suitable size of wooden box fixing on suface of wall complete all as specified and directed. Make :- Legrand/Havells/C&S/hHager

S & F Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 12 Way, IP-42 protection and suitable for having MCB’s complete and all disturbed surfaces of wall shall be made good to match the existing wall finishes all as specified and directed by Engineer-in-charge. make- L&T/Havells/C&S/legrand/hager.

S & F Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), TPN, 240 volt, 6 Way, IP-42 protection and suitable for having MCB’s complete and all disturbed surfaces of wall shall be made good to match the existing wall finishes all as specified and directed by Engineer-in-charge. make- L&T/Havells/C&S/legrand/hager.

S & F Power line vertical type TPN DB double door 4 way, IP 43 suitable for MCCB 100 amps CRCA sheet metal enclouser with detachable gland plates for flush / surface mounting with bus bar neutral link and Earth Bar in concealed and all disturbed surfaces of wall shall be made good to match the existing wall finishes complete all as specified and directed. make- L&T/Havells/C&S/legrand/hager.

Taking down old Unsv MCB/MCCB/RCBOs of any type & any capacity complete all as specified and directed

S & F MCB SP 6 to 32 Amp,C series , 230 Volts complete all as specified and directed . Make - L&T/Havells/C&S/legrand/hager.

S & F MCB DP 6 to 32 Amps, C series, 230 Volts complete all as specified and directed . Make - Standard/Havells/C&S

S & F MCB TPN 40-63 10 KA "C" series 415 Volt complete all as specified and directed. Make : L&T/Standard/Havells

S & F MCCB 4 Pole 415V Fixed type 25-100A with breaking capicity 16 KA complete all as specified and directed. Make : L&T/Standard/Havells

Supply and fixing in repair water heater (Geyser) storage type, single phase, energy saving 5 star rated 230 volts grade 10 Ltrs storage capacity complete with fixing accessories.

Supply and fixing in repair water heater (Geyser) storage type, single phase, energy saving 5 star rated 230 volts grade 25 Ltrs storage capacity complete with fixing accessories.

M&L for painting to ceiling / exhaust fan in two coats over one coat of red oxide primer using syenthetic enamel paint after washing with casting soda water ,scarping to old paint, cleaning etc and identy marking by different colour as per exisiting complete all as specified and directed. Note :- Colour of paint shall be approved by Engr-in- charge.

S& F ceiling fan of sweep not less than 1200mm with hanger in replacement of existed old vintage unseviceable ceiling fan as specified and directed. Make- Crompton/Havells/Bajaj

S&F in repair exhaust fan size of sweep not less than 300 mm copper wounded winding energy saving single phase, 230 volts, 50 HZs with louver, set of sweep and all connecting accessories including making all electric connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed.

Supply and fix in repair , wall mounting fan size of sweep not less than 450 mm heavy duty energy saving single phase, 230 volts, 50 HZs complete all connecting accessories including making all electric connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed.

Taking up earthing complete all as specified and as directed.

Material and labour for earthing complete with copper earth plate electrode 600cm x 600 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below the normal ground level) with top edge of plate not less than 1.5 m below normal ground level, connected to copper strip 25x4 mm as earthing lead by means of bolts, nuts and washers, check nuts made out of copper all as shown on electrical plate No.5 of SSR Part-I connected to earthing test point complete all as specified and directed.

Supply and Fixing in repairs wall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 10 W/9W 2 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting as per Make Havells Cat No LUMILINEBS9WLED865SPCWH

Supply and Fixing in repairs wall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 20W 4 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting as per Make Havells Cat No LUMILINEBS20WLED865SPCWH

S&F in replacement road/ security light/bldg light with high power LED fitting as light source ,energy saving envoirmental friendly 30 W with advance features all as complete with fixing arrangement such as GI pipe brakets bend in 120 degree, clamps made out by GI strip suitable for steel or PCC poles, nuts ,bolts and washer to be fixing incl making all eclectrical connection with three core flexible copper cable etc specified and directed. Make ; Century LED LTD Coad-SPFL030C

Supply and fixing recessed dust free LED fitting 24 watts soft light glare free homogenous illumination very high efficiency enviormental friendly long life of suitable for T- grid celing and modular celing application complete making all connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed.

Supply and fixing in replacement of LED ADORE Lamps 15 W B22 CDL OF 3 STAR Rating including lumen output 1425 (lm) of BALL LAMP for cool day light complete. Make - Havells cat No. LHLDDEEEML8R015

Supply and fixing in replacement of LED ADORE Lamps 10 W E27 CDL OF 3 STAR Rating including lumen output 950 (lm) of BALL LAMP for cool day light complete. Make - Havells cat No. LHLDEUHEML8R010

Supply and fixing in replacement of LED ADORE Lamps 7 W B22 CDL OF 3 STAR Rating including lumen output 700 (lm) of BALL LAMP for cool day light complete. Make - Havells cat No. LHLDEUEEML8R007

M&L for taking up to LT UG cable in all grade/ core/type/make etc after removing connection complete all as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core

M&L for galvanised steel tubing in light grade bore 40 mm with all fitting laid in trenches/ fixed with wall/ pole using fixing accessories all as site complete directed by Engr-in-charge. Make - Tata/ Jindal/ NTL

Supply and fixing PVC insulated, sheathed muilticore copper condutor 1100 volts grade 3 core x1.5 Sqmm flexible cable for conncection making. Make - Havells / Finolex/ Plaza

Excavation in trenches n.exc 1.5m wide and n.exc and 1.5 mtr in depth getting out in in soft/loose soil all as specified and directed by Engineer-in-charge.

Returning and filling including spreading, leveling, watering and well ramming in layer n.exc 25 CM thick in soft/loose soil all as specified and directed by Engineer-in-charge.

Removing excavated material to a distance not exc. 50 mtrs and deposting where directed at a level not exceeding 1.50mm above the starting point all as specified and directed by Engineer-in-charge.

Supply and laying natural river sand as cushioning of cables, including spreading and punning down all as per clause No 3.21 of SSR part -I complete all as specified and directed by Engineer-in-charge and directed by Engineer in charge Note : punned thickness will only be measured for payment purpose.

M&L for sub class 'B' brick for protection of UG cable in tranches of old size brick all as specified and directed by Engineer-in-charge.

Supply and fix GI pipe of dia 25mm to wall/Pole of medium grade with required clamping arrangements to fix with the pole complete and connecting to the existing pipe line all as specified Make : JINDAL/TATA

Supply and fix new gun metal gate valve of dia 25mm with iron wheel all as specified and directed for the following sizes Make: TATA / JINDAL

M&L for Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 15mm complete all as specified.

S & F double layered Rotational moulded polyethylene water storage tanks 1000ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed. Make- Sintex Note- The cost of connecting inlet and outlet water tube is deemed to be included in the unit rate.

M & L angle iron Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose.

Chinmay Traders

D G Corporation

Sibson Constructions And Co

M/S Manjit Singh

Anil Kumar Sarmah

M/S MOHANPASARI

M/S Deep-Jeet

M/S M N ENTERPRISE