SPECIAL REPAIRS TO BLDG NO. NP-169 AT KANCHRAPARA UNDER GE BARRACKPORE.

Amount

B/R Portion Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) all as specified.

Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) all as specified.

S&F steel windows with side hung shutters including Box type hinges with steel handles, & steel peg stay, complete with glazing bars, dovetailed or welded

S&F steel windows with side hung shutters including Box type hinges with steel handles, & steel peg stay, complete without glazing bars, dovetailed or welded

S&F framed work such as grills, gratings, etc., with ends of bar shoulder &/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks & similar work conforming to Fe 290 GDE -E-165

M&L Preparation of new steel sufaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade over one coat of red oxide primer not otherwise described including rubbing out and cleaning rust on new steel surfaces Complete all as specified and as directed by the Engineer-in-charge.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) complete all as specified and as directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105x60 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) complete all as specified and as directed.

S&F 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated fitted to chowkats all as specified and directed.

S&F 2nd class hard wood 35mm thick glazed and skeleton door shutters factory made, open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per clause 8.20 (a) of SSR Part-I 1991 (Larger size to be provided) complete all as specified and directed Note:- Glass or Wire cloth shall be measured and paid separately.

M & L preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing as given in SSR.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frames shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom railon either side and as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing as given in SSR.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, orstainless steel wire staples all as specified & directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane all as specified and directed.

S&F 3.00 mm thick frosted sheet glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane.

S&F 75 mm long Butt hinges, medium weight, stainless steel and fixed complete all as directed.

S&F 250 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified.

S&F 2nd class Small fitting such as brackets of any type, latch & hinge blocks, shaped door & window stops & the like including all necessary labours; articles n exc 200cu.cm each

S & F Peg set of Six powder coated fixed with chromium plated brass screws and wooden and plastic cleats ( min wt 190 gms)

S&F in repair 25mm bore Mild steel powder coated, single curtain rod (wall thickness not less than 1mm) including fancy type Mild steel brackets, funnels etc suitable for single curtain rod, fixed in repair, etc complete all as specified and approved by GE.

Demolitin of brickwork built in cement mortar including all quions ,arches,pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles

M&L Brick work with sub class'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:6) all as spd and directed

Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

M&L Rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed

M&L preparation of new plastered surface of external wall and chajjas and making the surface smooth with sand paper and priming the surface with alkali resistance primer paint for external surface, over primed surface applying two coat of cement base paint incl curing complete all as specified & directed.

M&L preparation of new plastered surface of wall by applying 2 mm thick wall care putty and making the surface smooth and applying two coats of oil emulsion distemper over a coat of alkaline resistant primer complete all as specified & directed.

M&L three coats of white wash on surface of wall including preparation of new plastered surface complete all as spd and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) all as directed.

M&L plain cement concrete, type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair complete all as specified

M&L for 75 mm thk PCC 1:4:8 type D-2 as in subbase to flooring.

M&L Sand filling under floors or in Foundation including watering & consolidation etc complete all as specified.

M&L 60 mm thick M-35 grade machine pressed precast concrete interlocking paver block any shape and size conforming to IS-15658-2006, with grey cement and pigment, all as specified and as directed.

Dismantling old floor tile incl cement mortar bedding and removal of debris out of premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc and brusing neat cement slurry with 3.00 kg per sqm all as spd & directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. over screed bed or bedding layers of mortars 15 mm thick in CM 1:4 for laying floor finishes all as spd and directed

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in skirting/dado/risers of steps etc set and jointed in neat cement slurry and pointed in coloured cement. incl rendering 10mm thick in CM (1:4) and finished rough on walls etc complete all as specified and as directed.

M&L glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough and rubbish off the premises complete all as spd & directed. Note applicable for Srl Item No. 39, 40 & 41- (i) All straight cutting and waste shall be included in the quoted rate. (ii) If tiles of different size are used then no price adjustment shall be entertained by the department.

Dismantling wrought iron or mild steel work of any description not otherwise provided.

S & F wind ties for roof including securing bolts; posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; similar work conforming to Fe 290 or E-165

Dismantling structural steel work in tubular purlins including doors, gates but excluding framed trusses etc complete all as specified.

S&F Rolled section as in main & cross beams, hip & jack rafters; purlins where connecting to common rafters & running rails & guides for sliding doors; fixed with angles cleats o other connecting plates conforming to Fe 290 (Gde-E-165)

Dismantling of Asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings

S&F prepainted galvatume aluminium zinc coating GI based corrugated steel 0.50 mm thk of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as in roof complete all as specified.

S&F Prepainted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge /cladding to wall, fixed with self tapping screws as specified.

Dismantling Wall & ceiling boards (fiber, pulp, insulation, etc) or insulation boards /slabs/blankets, any thickness, including cover fillets

Dismantling timber scantlings 40 sq cm & over in section, in any position

Dismantling timber in fillets, rails posts, rafters, purlins, etc. under 40 sq cm in section

S&F 4 mm thick Fibre cement Standard ceiling board of Everest or equivalent make with false ceiling(oceanic) with powder coated exposed G.I grid suspension system (E- Grid T 2430 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span withhanger spacing of 1200 long cross Tee 1200/600 mm long and wall Angle . The wall Angle shall be fixed on pvc Dash Fasteners on the perimeter of the wall by steel screws with distance 300 mm c/c . The main Runners to be placed @1200 mm c/c . The Cross Tee 1200mm will be inserted in the pre cut slots of Main Runner at a Regular interval of 600 mm to form a modular grid of 1200mm x600 mm .Additional cross Tee 's of 600 mm shall be placed perpendicular to the cross Tee 1200 mm long to finally from a grid of 600 mm x 600 mm. Grid ofr module of size 600 mmx600mm shall be supported by 6 mm dia G.I. wire from purlins/ soffits. 4 mm thick High pressure steam cured Non Asbestos Fibre cement standard ceiling Board (Density > 1200 kg/ cum ) of size 595mm x 595 mm , conforming IS 14862 & Type B category III of ISO 8336 , tested as per AS 1530 part - 3 & B. S - 476 part 4,5,6,7&8, should be placed in Grid module to form

Taking up or down steel water tubing and connections of 15mm dia all as specified and directed.

Taking up or down steel water tubing and connections of pipe 20mm dia all as specified and directed.

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.

S&F in repair stop valve/ Angle valve cast copper alloy (ISI Marked) chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia complete all as specified and directed.

S&F in repair Bib taps for 15 mm bore pipe, cast copper alloy fancy type chromium plated fixed in repairs complete all as spd and directed.

S&F in repairs Vitreous china wash basin, white flat back,size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe fixed in repair including waste copling 32mm size full thread ,brass, chromium plated for glazed ware sinks, basins, etc., with long screwed shanks & fly-nuts all as spd and directed

M&L for 32 mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.

S&F 15mm bore pillar cock fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked add if fixed in repairs complete all as specified & directed.

S&F in repair towel rail CP 600 mm long, 20 mm dia complete all as specified and directed.

S& F in repair CP Shower rose with or without swivel joints, any size,including fixing to steel pipe or union complete all as spd and directed.

S&F in repair shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 300 gms) complete all as specified.

S&F in repair Vitreous China squatting pan of orissa pattern, size 580x440mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern ( including fixing of flush pipe) including provision of cement concrete bedding, in repair complete all as specified and as directed.

S&F in repair PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supply, Hoisting and fixing rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing PVC tank of any capacity complete all as specified & directed.

S&F in repair 20 mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore.

S&F in repair 100 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints all as specified.

S&F in repair 100 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured)

S&F in repair Cast Iron Branch peices, single(equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 100 mm bore dia complete , ISI Marked, fixed in repairs all as specified & directed.

S&F in repair in 75 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints all as specified.

S&F in repair 75 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured)

S&F in repair CI floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with ot without hole for waste pipe complete all as specified.

S&F 75mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints all as specified.

S&F cast iron cowl for 75 mm dia all as directed by Engr-in-charge.

S&F cast iron 'P' or 'S' trap 100 mm dia all as directed by Engr-in-charge.

S&F cast iron Swan necks (or offsets) upto 152mm projection for 100 mm to 75 mm pipe.

M&L in repair 150x100 mm Salt glazed stoneware gully traps, square or round mouthed, type‘P’

M&L preparation of old plastered surface of wall by applying 2 mm thick wall care putty after complete remoal of existing treatment and making the surface smooth and applying two coats of oil emulsion distemper over a coat of alkaline resistant primer complete all as specified & directed.

M&L preparation of old plastered surface of external wall after complete removal of existing treatment and applying two coats of cement base paint incl curing complete all as specified & directed.

E/M Portion Disconnecting the electrification and taking down DBs (any type of SPN DBs) and making good to the disturbed surfaces to match the existing surface all as specified and as directed by Engr-in-charge. Note - Temporary power supply shall be provided by contractor.

Taking down unserviceable submain wiring aluminium etc and making good the disturbed surfaces of walls/ floor etc matching with the existing surface.

M&L for sub main wiring (concealed) complete with 2 run of 6 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 6 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unserviceable submain wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

Taking down carefully aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pedants, regulators, sockets, light fitting etc.. and making good the disturbed surfaces of walls/ floor etc matching with the existing surface all as specified and as directed by EIC.

M&L point wiring complete with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade (MMS) and including cutting, chasing work at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. flush mounting MS box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly one light point controlled by one way switch and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface complete all as specified and directed for the following:- Note:- All necessary accessories such as modular box,top cover plate, blank plate,MS box,screws,washers and all modular electrical fixtures are to be used same make/brand only and shall be deemed in to included in quoted rate only.

All as per Srl Item No 88 but One ceiling fan controlled by one switch.

All as per Srl Item No 88 but One 3 pin socket outlet 5 Amps on the same board.

All as per Srl Item No 88 but One 3 pin socket out let 5 Amps on the independent board.

All as per Item No. 88 here-in-before but 4 Sq mm multi stranded copper conductor with 4 Sq mm copper earth continuity wire connected to earth duly complete for one 15A Socket on Independent board all as specified and as directed by Engr-in-Charge.

S&F LED 18/20 Watt decorative box type fitting with end caps,pre wired for LED tube including provision of round/square PVC box for mounting of T/L fittings all as specirfied and as directed by Engr-in-Charge Make : Crompton Greaves Cat No. DMLN1LT8-16, HPL Cat No. HPLEDT802WT, Havells Cat No. LHFYBWP1TB1W020.

S&F IP20 linear LED T8 tubular lamp with extruded aluminium/PC body and PC diffuser complete with inbuilt driver 20 watts all as specified and as directed by Engr-in-Charge. Make : Crompton Greaves Cat No. LTT8-20/HPL Cat No. HLPT81418PC (CW), SURYA Cat No SLE BT 10 or equivalent in HPL.

S&F angle lamp holder, PVC Polycab type with back plate suitable for batten fittings. Make : HPL, Anchor, Crabtree.

S&F LED Bulb 12 Watt all as specified and as directed by Engr-in-Charge. Make : MESCAB, CG, Philips

S&F stepped type (0-4 step) electronic regulator for ceiling fan 1200 mm, 240 volts, 100 Watts, single pole, including connecting, testing complete all as specified and as directed by Engr-in-Charge. Make : HPL, Anchor, CG, Bajaj

S& F Socket outlet, flush type 2 in 1, 5 pin, 5 amps, 240 volts all as specified and as directed by Engr-in-Charge. Make : HPL, Anchor, Leader, Crabtree

S&F switch piano flush button single pole one way 5 amp 240 volts, all as specified and as directed. Make : HPL, Anchor, Leader, Crabtree

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amps, flush type, 240 volts all as specified and as directed by Engr-in-Charge. Make : HPL, Leader, Anchor, Crabtree

S&F switch piano flush button single pole one way 15 amp 240 volts, all as specified and as directed. Make : HPL, Leader, Anchor, Crabtree

M&L for ceiling rose, surface bakelite, 65 x 50 mm, three terminals all as specified and as directed. Make : Anchor, Leader, Crabtree

S&F rectangular block for mounting switches, sockets, fan regulator, T/L fittings, ceiling roses etc with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep all as specified and as directed by Engr-in-Charge.

Taking out old un-serviceable distribution board of any type and size completely, supply, fixing and testing MCCB DB 4 way TPN with all standard sccessories, sheet metal enclouser where MCBs to be housed CRCA sheet powder coated complete concealed with wall and making good to the disturbed surface of wall/ceiling and matching with the existing one complete all as specified and directed by Engr-in-charge. Make: Havells/Legrand/L&T/Simens

S&F MCCB 100 Amps, 16 KA, 3 pole complte all as specified and directed by Engr-in-Charge. Make- Havells/Legrand/L&T/Simens

S&F FR-LSH PVC insulated (unsheathed) single core multi stranded copper cable 10 Sq mm from MCCB to TPN DB all as specified and as directed by Engr-in-Charge.

S&F sheet metal enclosures for SPN DB's with double metal door for incorporating MCBs,IP-43 , 8 way with 200 amps rated busbar, 240 volts, as per IS-8623 with all connected accessories all as specified and as directed. Make- Havells/Legrand/L&T/Simens

S&F sheet metal enclosures for SPN DB's with double metal door for incorporating MCBs,IP-43 , 12 way with 200 amps rated busbar, 240 volts, as per IS-8623 with all connected accessories all as specified and as directed. Make- Havells/Legrand/L&T/Simens

S&F MCB double pole.40 amps, 240 volts, 50 Hz, 'C' curve including necessary incoming and out going electric connection with suitable size of copper lugs all as specified and as directed by Engr-in-Charge. Make- Havells/Legrand/L&T/Simens

S&F MCB SP, 6 to 32 Amps, 240 volts, 50 Hz, 'C' curve including necessary incoming and out going electric connection with suitable size of copper lugs all as specified and as directed by Engr-in-Charge. Make- Havells/Legrand/L&T/Simens

M&L for Earthing complete with galvanised steel earth plate electode 600mm x 600mm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode upto test point or upto 7.5 mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Part-1 and GI watering pipe of 20 mm dia medium grade, GI funnel with wire mesh, including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber (1:3:6) type C1, of size 45 x 45 x 45 cm, RCC cover (1:2:4) type B1 of size 45 x 45cm and 50 mm thick including excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed.

Taking down old unserviceable existing service/UG cable all as specified and as directed by Engr-in-Charge.

Supply, fabricated and and fixing of street light bracket made out of GI pipe 1.0 Mtr long, 32 mm dia medium grade bent to shape as directed including clamps made out of 40 mm x 6 mm flat for fixing bracket suitable for steel tubular poles including nuts and bolts, washers and other connected items of required size including painting with one coat of aluminium paint over a coat of red oxide/primer including taking out old all as specified and as directed.

S&F for LED Bldg Security light - Indus series IP-66 powder coated pressure die cast aluminium compact hight power LED street light with heat resistant foughned glass of capacity 30 Watt all as specified and as directed by Engr-in-Charge. Make : Crompton Greaves Cat No. LSTS-30-CDL, HPL Product Code No. HPLLEDSL3060P, Surya Cat No. SLE UL 30W IP66 LXN, MESCAB Cat No. MSL 04 30 W.

M&L for disconnecting electric supply, taking down fan, ceiling cable ends, dismantling blades carefully after unscrewing nuts and bolts of ceiling fan any size from existing position and bringing to AGE E/M store yard for cleaning all dusts, oiling, greasing all as specified and as directed by Engr-in-Charge. Note: (i) Required material i.e. oiling, greasing etc. shall be included in the quoted rate. (ii) Transportation charges from existing site to AGE E/M store shall be included in the quoted rate.

Hanging only the repaired ceiling fan and connecting up including provision of cables from ceiling rose or connector to fan all as specified and as directed by Engr-in-Charge. Note: (i) Repaired ceiling fan shall be obtained from Srl Item No 115 above as hanging only. (ii) Transportation charges from existing site to AGE E/M store shall be included in the quoted rate.

M&L for under ground XLPE insulated, screened, PVC bedded galvanized steel strip or wire armored, electric power cable (heavy duty) with aluminium conductor, 1100 volts (earthed) grade cross sectional area 16 sqmm 4.00 core complete all as specified and directed. Notes : (i) Earth work shall be measured and paid separately under relevant item. (ii) Sand cushioning, brick for cable protection, GI pipe, etc shall be measured and paid separately under relevant items.

Excavation in trenches for laying under ground cable, erection of poles and stays in soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5 meter deep and getting out complete all as specified and directed

Returning, filling in, including spreading leveling, watering and well ramming in layers not exceeding 25cm soil all as specified and directed.

Removing surplus excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting points as in soft/loose soil all as specified and directed.

Supply and laying sand coarse dry as in cushioning of underground electric cable in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable ) and gently punned down to 18cm thickness complete all as specified and directed. (Note : Punned thickness will be measured for payment.)

M&L for brick covering with width equal to length of brick as mechanical protection to cable with well burnt sub class ‘B’ bricks of size 250mm x 125mm x 75mm laid dry flat complete all as specified and directed .

M&L providing GI pipe for cable protection light grade with all fittings of 50 mm bore laid in trenches or in wall complete all as specified and directed.

M/S. M. S. CONSTRUCTION

CHANDRA CONSTRUCTION & CO.

INDUSTRIAL CONSTRUCTION

S S ENTERPRISE

M/S KARTICK CHANDRA CHAKRABORTY

SWASTI ENTERPRISES