Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 2 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹32.1 L
EMD Value
₹64,160
Closing Date
2 Nov 2022, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer PHE Division Baramulla
Executive Engineer PHE Division Baramulla
Constt of 0.30 lac gallons capacity Clear water sump cum pump house at Adda Mohalla Hadipora and Laying/ fitting of 100 mm dia D.I Gravity Main from RD 3200-4200 Mtrs upto clear water sump at Hadipora including 100mm dia G.I Rising Main from Sump Had
2022_PHE_193594_1
ENIT 54 of 10/2022
Open Tender
Civil Works
Item Rate
45 days
Hadipora
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,300
Executive Engineer
₹64,160
3 Nov 2022
25 Oct 2022
3 Nov 2022
25 Oct 2022
2 Nov 2022
25 Oct 2022
Amount
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed
All Kinds of soil.
Ordinary Rock
Bitumen cut
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :
Laying and fitting of G.I. pipes (all classes) complete including cost of pipe specials and excluding cost of Pipes and Earth work.
20 mm dia. nominal bore
25 mm dia. nominal bore
40 mm dia. nominal bore
50 mm dia. nominal bore
65 mm dia. nominal bore
Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe)
Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket.
100 mm dia pipes
150 mm dia pipes
Providing stone soling and dumping in horizonalal in level quarry
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement)
Centering and shuttering including strutting, propping etc. and removal of form work for:
Foundations, footings, bases for columns
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
Columns, pillars, piers, abutments, posts and struts.
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
Suspended floors, roofs, landings, balconies and access platforms.
Edges of slabs and breaks in floors and walls Under 20 cm wide
Extra for shuttering in circular work:
Foundations, footings, bases of columns etc.
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)
Extra for brick work in superstructure above plinth level upto floor V level. (By manual means)
15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): KD/ Silver wood
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. KD/ Silver wood
Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : KD/ Silver wood
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover
Providing and fixing balls bearing for rolling shutter
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2
P/F of G.S plain coloured eves boarding of 250 wide of standard thickness incl all carraiges upto site of work ( 0.50mm thick )
Providing and fixing of ridges or hips of 90cm overall width plain G.S Sheets
P/f of 0.60mm in width soffit /sheet( Corrugated) for covering of gables the Job inlcudes cost of 25mm dia angle iron base support
Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work.
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
Applying priming coat: With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre, two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications
Providing and fixing of MS flanged joints (10mm to 12mm thick) to double flanged GI/DI pipes including cutting of pipes, welding charges, cutting of flanges, rubber gasket, bolts, nuts including testing of joint and all sorts of carriages. Complete Job.
80 mm dia pipe
100 mm dia. pipe
150 mm dia. pipe
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete
25 to 40 mm nominal bore
50 to 80 mm nominal bore
Providing and fixing D.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). Confirming to IS:14846 read with latest amendments.
150 mm dia. Class 1
100 mm dia. Class 1
80 mm dia. Class 1
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)
25 mm nominal bore
40 mm nominal bore
50 mm nominal bore
65 mm nominal bore
Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately).
50mm dia
Providing fixing of MS lid cover of 2.25x0.75m with angle iron frame including locking arrangement and all carraiges complete.
Providing and fixing of electrical points (heating and lighting) including cost of wire switches, necessary MCB's Switches, Switch boards,Ceiling rose reputed make ISI mark Screws,casing conduit material including all sorts of carriage and labour charges req for the job.
Lighting points
Heating Points
Bulk Head
Providing & fixing MCB distribution box 10 way main double door system.
Manufacturing providing fixing of MS Bends/ Tees including carraige of welding machine upto site of work incl. cost of nuts, bolts, rubber washers etc., complete job.
Providng /Fixing / erection of coloured sign board. The job includes cost of angle iron, flates, PGI sheets, letter writing charges, fixing charges, welding etc., size of board must be 2.5m x 1.25m as per direction of Engineer Incharge complete in all respect
Providing and fixing of MS surface boxes (0.75x0.75x0.75) of 6mm thick plate for sluice valves. The job includs fixing of angle iron frame legs in cement concreate 1:2:4 mix with locking arrangements complete.
Manufacturing / fabrication of different dia's of GI tees/ bends/ reducers for making different connections. The job includes cost of flanges, nuts, bolts, rubber insertions, welding excluding cost of pipe material
150mm dia Bend
150x150x150mm dia Tee
150mm dia Tail Piece
150x150x100mm dia Tee
Providing and incorporating G.I Sheet strip 150mm wide and 2.5mm thick during concreting.
Making holes in R.C.C walls and making it good the same
Manufacturing/ fabrication of different dias of Bends/ Tees/ Reducers for making different connections. The job includes cost of flanges, nuts, bolts, rubber insertions, welding excluding cost of pipe material
150 mm dia Bend
150 mm dia Tail Piece
150x100mm dia reducer socket
100mm dia Bend
100x80mm dia reducer socket
100mm dia Tail piece
80mm dia Bend
80mm dia Tail Piece
80x65mm dia reducer socket
65mm dia Bend
65mm dia T.piece
Providing fitting of following pipe specials:
65 mm dia GI Union
50 mm dia GI Union
40 mm dia GI Union
25 mm dia GI Union
20 mm dia GI Union
65 mm dia GI Elbow
50 mm dia GI Elbow
40 mm dia GI Elbow
25 mm dia GI Elbow
20 mm dia GI Elbow
65 mm dia GI Nipple upto 10"
50 mm dia GI Nipple upto 10"
40 mm dia GI Nipple upto 10"
25 mm dia GI Nipple upto 10"
20 mm dia GI Nipple upto 10"
25 x 25 x 20 mm dia GI E. Tee
40 x 40 x 25 mm dia GI E. Tee
50 x 50 x 25 mm dia GI E. Tee
65 x 65 x 50 mm dia GI E. Tee
80 x 80 x 65 mm dia GI E. Tee
25 x 20 dia Elbow/ Reducer
40 x 25 dia Elbow/ Reducer
50 x 40 dia Elbow/ Reducer
25 x 50 dia Elbow/ Reducer
80 x 65 dia Elbow/ Reducer
Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered). Depth exceeding 1.5 m but not exceeding 3 m
Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.
carriage of material from source to site of work by Mechnical Transport including loading unloading and stacking etc.
150mm dia D.I pipe for 10 Km
100mm dia D.I Pipe for 10 Km
Below 100 mm dia GI pipes for 10 Kms
Cement /Steel max lead 10 Km
Sand max lead 5 Km
aggregate 20mm nominal size max lead 35 Km
Stone aggregate 40mm nominal size max lead 35 Km
Bricks for 70 Kms
Stone soling for 20 Kms
MOHMMADD SYED MIR
stage.html
html • 0.02 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .