Special repair to Bldg No T41 Nissan Hut of Furniture Yard Provn of Galvalume sheet with iron pole and Kota stone flooring in 02xCook House Bldg No P181 and P182 of Trg Bn SRC Provn of 20 x Western toilet sheet in Single JCOs Accn at 17 Camp The SRC,

Amount

Dismantling of plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings sheet in parabola shape/semi circular, complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding frame truss etc., complete all as specified and directed.

Demolition of brick work or stone / boulder or concrete block masonry including all quoins, arches, pillars, etc. built in cement mortar complete all as specified and directed.

M & L for brick work with sub class 'B' bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 50 Kg/Sqcm) old size bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6), complete all as specified and as directed. (14+9.4)

All as per item No.04, here-in-before but except bricks.

Material and labour for rendering 15mm thick in CM(1:4) finishing surface even and smooth without using extra cement, on surfaces of brick or concrete surfaces, complete all as specified and as directed.

M & L for plastering 15mm thick on fair faces of brickwork or concrete surfaces finished evern and smooth without using extra cement in CM 1:6, complete all as specified and directed.

M & L for cement concrete type B1, 1:2:4 (using 12.5 mm graded aggregate) in levelling courses, coping, window cill etc., complete all as specified and directed. (1.5+1)

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level), complete all as specified and as directed. (4.2+4.5)

M & L for 75mm thick plain cement concrete type B-2, 1:2:4 (40mm graded aggregate) as in sub base of flooring, complete all as specified and directed.

Roughening surface of old concrete floor by picking, sweeping washing down with water to remove dust etc., complete all as specified and as directed. (320+120)

M & L for providing 75 mm thick cement concrete 1:4:8 type D-2 (Using 40mm grade stone aggregate) as in sub floor , sub base of floor finished even and rough complete all as specified and directed. (320+450)

M & L for machine cut kota stone slab flooring 20-25mm thick over 20mm screed bed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. (320+120+40.20)

M & L for 75 mm thick plain cement concrete (1:3:6) mix, type C-1 using 20mm graded stone aggregate as in plinth protection, finishing the surfaces even and fair without using extra cement, including 10 mm wide, 75mm deep joints made at 3.00 m in length and filled with bitumen 85/25 and sand in the ratio 1:3, complete all as specified and directed.

S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering as in parabola, semi circular shape, incline roof covering/cladding to wall/gate, fixed with self tapping screws complete all as specified and directed. (415+120+42.01))

S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. (10+12)

S & F for fibre glass 2mm thick reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof, complete all as specified and as directed.

S & F mild steel framed work as in doors or gates of angle or other section with gusset plates, complete doors etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting and also fastening (Fe 410W gde E 250) complete all as specified and directed.

S & F 1.25mm thick mild steel plain black sheet in covering to door chowkhat (frames) cut to size beaded if directed, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles, stopped ends, outlets, etc as required complete all as specified and directed by Engr-In-Charge .

M & L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed by Engr-in-Charge. (90+50+33)

M & L for preparation of old steel surfaces of any description over 10cm width or girth and applying one coat of aluminium paint over, complete all as specified and directed by Engr-in-Charge.

S & F Mild steel pulley 150 mm dia fixed in MS gate, complete all as specified and as directed by Engr-in-Charge.

M & L for roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., and welding counter sunk for holes and necessary gusset plates etc and similar work conforming to Fe-410W (Gde E-250 quality A) complete all as specified and directed by Engr-in-Charge.

M & L for RCC(1:1.5:3) type A-1 using 20mm graded stone aggregate as in lintel beams, cantilever, bressumers supported on walls, beams and columns and the like, complete all as specified and as directed.

M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girder, bressummers, lintel, cantilever, shelves including support, overhang etc., also splays between floors and beams, etc., complete all as specified and as directed.

S & F mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia or securing with clips, complete all as specified and directed.

S & F mild steel TMT bars 5mm dia and over, as in stirrups cut to length, bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified.

Material and labour for rendering 15mm thick in CM(1:6) finishing on fair faces of brick work or concrete surfaces even and fair without using extra cement, complete all as specified and as directed.

M & L for preparation of newly plastered surface and applying two coats of cement base paint, complete all as specified and as directed.

M & L for machine cut kota stone slab as in skirting 18-20mm thick over 10mm screed bed in cement mortar (1:3) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. (8+3.30)

M & L for 40mm thick plain cement concrete type B-2, 1:2:4 (20mm graded aggregate) as in floor finished, even and smooth without using extra cement, complete all as specified and directed.

S & F 10 litres capacity PVC low level flushing cistern including flush pipe, float valve, siphon etc, including 32 mm dia PVC flush pipe of required length, including two Nos. PVC brackets, complete with all fittings incluidng connections and making good disturbed surfaces in CM 1:3, complete all as specified and directed by Engineer-in-charge.

S & F vitreous china wash down water closet pan, pedestal pattern Pedestal pan and trap(excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc and including seat and cover for pedestal pan, complete all as specified and directed.

S & F vitreous China wash hand basin, white, flat back, size 550X400mm including , chain and plug, and porcelain stopper, cast iron brackets and PCC (1:2:4) type B1 using graded stone aggregate for embedding brackets and making disturbed surfaces in CM(1:3), waste pipe complete including cutting for and pinning in ends of brackets and 32 mm dia waste fitting brass chomium plated for wash hand basin etc; with long screwed shanks and fly nuts, flange end bedded in red lead cement , complete all as specified and directed.Make:- Hindware/Parryware/Cera or of equivalent approved make.

S & F 15 mm bore fancy type pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT' or 'COLD’ with long screwed shank and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F in repair for PVC connection pipe of 15 mm dia and 45cm long to WHB and flushing cistern, complete all as specified and as directed.

S & F 15 mm dia angle stop valve of cast copper alloy, fancy type, chromium plated, complete all as specified and directed.

S & F bib tap, 15mm, cast copper alloy CP, fancy type with capstan head handle screwed down for iron pipe and fixed to 15mm bore pipe after taking down old brass bib tap, complete all as specified and as directed. (20+2)

S & F, 110mm bore PVC (SWR) bends any radius complete all as specified and as directed by Engineer-in-charge.

S & F, 75mm bore PVC (SWR) bends any radius complete all as specified and as directed by Engineer-in-charge.

S & F PVC (SWR) 110 mm bore junction single, (Single T) equal or unequal, complete all as specified and as directed.

S & F PVC (SWR) 75 mm bore junction single, (Single T) equal or unequal, complete all as specified and as directed.

S & F 110mm bore PVC(SWR) vent Cowl complete all as specified and directd.

S & F 75mm bore PVC(SWR) vent Cowl complete all as specified and directd.

S & F 75 mm dia outlet PVC(SWR) floor trap plain with steel grating including jointing with solvent cement, complete all as specified and as directed.

Taking up and down GI tubing including GI fittings complete from trench/wall/ceiling/floor suitable for 15mm dia pipe, complete all as specified and as directed.

Taking up and down GI tubing including GI fittings complete from trench/wall/ceiling/floor suitable for 20mm dia pipe, complete all as specified and as directed.

S & F for GI tubing medium grade including all types of fittings of ISI marked in new or old position to walls, ceiling, floors etc., suitable for 15 mm bore, complete all as specified and as directed.

S & F for GI tubing medium grade including all types of fittings of ISI marked in new or old position to walls, ceiling, floors etc., suitable for 20 mm bore, complete all as specified and as directed. (10+20)

Refixing of GI tubing and connection including new GI fittings complete in new or old position to walls, ceiling, floors etc., suitable for 15 mm dia pipe, complete all as specified and as directed.

Refixing of GI tubing and connection including new GI fittings complete in new or old position to walls, ceiling, floors etc., suitable for 20 mm dia pipe, complete all as specified and as directed.

S & F, 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed on walls, including PVC clamps etc. complete all as specified and as directed by Engineer-in-charge.

S & F, 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed on walls, including PVC clamps etc. complete all as specified and as directed by Engineer-in-charge.

M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/rectangular) area of each tile exe. 0.11 sqm but n.exe.0.18 sqm, in floors etc., over and including 15mm thick screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.

M & L glazed ceramic coloured tiles of size 375x250x7mm/450x300x7 mm thick as in dado/skirting etc set and jointed in neat cement slurry and pointed in colour cement to match the tiles including 10 mm thick cement plaster in CM (1:3), complete all as specified and directed.

M & L for preparation of old surfaces of walls including washing, rubbing down and stooping of distempered surface and applying one coat of oil emulsion distemper, white or tinted, complete all as specified and directed.

Taking down chowkhat with shutter (without taking of shutter from the frame) of any descipriton n.exc 1.5 sqm each complete all as specified and directed by Engr-In-Charge .

S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes suppyling & fixing in opening as per specification & drawing complete all as spcefied and directed by Engr-In-Charge .

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS framed shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS framed welded/sealed to stiles & rails with suitable PVC sheet beading & joined together with solvent cement complete all as specified and as directed.

Supply and fix 200mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.

S & F in repair 100mm butt hinges medium weight medium cold rolled mild steel complete all as specified and directed by Engr-In-Charge .

S & F aluminium sliding door bolts 300mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed, complete all as specified and directed by Engr-In-Charge .

S & F aluminium handles cast type 150 mm long, complete all as specified and directed by Engr-In-Charge.

S & F CP towel rail, 20mm dia, D type, 60cm long, complete all as approved by Engr-in-charge.

S & F Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connection and fixed in position, complete all as specified and as directed.

S & F 2 way angle cock with flange(Chrome finish), complete all as specified and as directed.

Excavation in post holes in soft and loose soil (or similar holes) each n.exc. 0.5 Cum getting out, returning, filling in and ramming earth around, in layers n.exc 50 cm etc., complete all as directed.

S & F posts and struts including cutting tops to shape as directed, including all necessary drilling, bolting or rivetting, etc., and similar work conforming to Fe-290, Gde E-165.

M & L for PCC (1:4:8) type D2 40mm graded stone aggregate as in, sub base, etc., complete all as specified and as directed.

S & F PCC (1:2:4) type B2 (using 40mm graded stone aggregate) as in sub-base etc., complete all as specified and directed.

S&F mild steel work in tubular trusses, purlins, rafters including special shaped washer etc. complete using any dia of MS pipe medium grade cut to length and fixed to walls for tubular roof trusses (framed), trussed, purlins, etc., complete all as specified and directed.

S & F expanded metal, n.exc 4Kg per Sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.90 mm dia or fixing with galvanised steel staples supplied and fixed, complete to wood and steel members.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as directed.

Hardcore of broken stone aggregate of gauge n exc 63mm, deposited, spread and levelled in layers not exc, 15cm thick, watered and rammed to a true surface, complete all as specified and as directed.

M & L for cement concrete nominal mix PCC, 1:2:4 type B-1 of thickness 75mm (using 20 mm graded aggregate) as in road pavements finished even and fair without using extra cement, complete all as specified and directed.

M & L for forming contraction/dummy joints of 65mm x 10mm wide primed and filled with sealing compound of bitumen (VG-10) and sand (1:3) mix, complete all as specified and as directed.

M & L for forming expansion joints of 65mm x 10mm wide primed and filled with sealing compound of bitumen (VG-10) and sand (1:3) mix, complete all as specified and as directed.

M & L for forming construction joints of 30mm deep x 10mm wide filled with sealing compound of Grade A. complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket bell or power) complete with all fitting such as batten, switch, ceiling rose, pendant, regulator, socket and brackets switch fuse etc removing materials from site and making good disturbed surfaces of walls, floors etc to match the existing surface all as directed .

M & L for point wiring for one light/ exhaust fan point bell controlled by one way switch 5 Amp with 1100 volt, 1.5 Sq mm multi stranded FRLS copper conductor cable with continuous earth wire of 1.5 Sq mm multi stranded copper FRLS conductor cable insulated-unsheathed, including PVC casing capping (ISI marked) with accessories, including wooden board with bakelite sheet 2.8 mm thick laminated cover make sheet for housing/fixing switches etc., complete all as specified and directed.

All as per item No 81 here-in-before but one 5 Amp socket outlet on the same board.

All as per item No 81 here-in-before but one 5 Amp socket outlet on independent board.

M & L for point wiring for 15 Amp power controlled by one 15 Amp switch with 1100 volt, 2.5 Sq mm multi stranded FRLS copper conductor cable with continuous earth wire of 2.5 Sq mm PVC insulated FRLS cable, including PVC casing capping (ISI marked) with accessories, including wooden board with bakelite sheet 2.8 mm thick laminated cover make sheet for housing/fixing switches etc., complete all as specified and directed.

S & F switch piano flush button single pole one way 5 Amp, complete all as specified and as directed.

S & F Switch socket combination 2 in 1, 3 pin, 5 Amp and 15 Amp flush type, universal, complete all as specified.

S & F Switch socket combination 2 in 1, 3 pin, 5 Amp flush type, universal, complete all as specified.

S & F socket outlet 2 in 1, 3 pin, 5Amp, flush type, universal, complete all as specified.

Supply and fix ceiling rose three terminals PVC/ Polycarbonate, isolated body complete all as specified.

Supply and fixing enviromental friendly, energy saving long life corrosion resistant, vertical surface mounting pressure die-cast aluminium housing and control gear compartment well glass luminaires with high power 35 Watts LED as light source including electrical connection, complete all as specified and as directed. Cat Part STUPEWGP35WLED757SSYMTOPCGRY of Havells or its equivalent as approved.

Supply and fixing enviromental friendly, energy saving long life, exclusive innovative die-cast aluminium flood light with high power 50 Watts LED as light source, suitable for highlighting architectural features of area lighting including electrical connection, complete all as specified and as directed. Cat Part JETAQUANTOPLUSFLP50WLED757SYMLENS of Havells or its equivalent as approved.

S & F MCCB, 3 pole, 415 V, fixed type, 125 Amps with breaking capacity 25 kA, duly ISI marked, complete all as specified and as directed. Make: Indo Asian or its equivalent in Havells/Standard/L&T.

S & F MCB, single pole (SP), 5 to 32 Amp with 10 kA breaking capacity of 'B' series in distribution board conforming to IS/IEC 60898-1 (ISI marked), complete all as specified and as directed. Make: Indo Asian or its equivalent in Havells/Standard/L&T.

S & F sheet metal enclosures for DBs when MCBs to be used in vertical tipple pole and neutral (VTPN) double door 415 volts, 12 way, with IP-43 IK-09 protection including 200 Amp rated bus bar and neutral link (ISI marked), complete all as specified and as directed.

M & L Sub main wiring two single core 4.0 Sqmm PVC insulated FRLS multistanderd copper conductor cable and one run of 4.0 Sqmm PVC insulated unsheathed FRLS multi stranded copper conductor cable for earth wire drawn in & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 20 mm dia, complete and making good disturbed surface wall complete all as specified and as directed. Note : - Not : 2 runs of 4 Sqmm cable, 1 run of earth wire 4 sqmm and PVC counduit shall be measured as one unit length.

Supply and laying for fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated aluminium conductor served with inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 25 Sq mm, 4 core nominal cross section including testing , complete all as specified and as directed by Engr-in-Charge.

Excavation in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth and getting out for laying pipes as in soft and loose soil, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm, complete all as directed.

Removing excavated materials n.exc. 50 m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as directed. (9+67 PccPath)

M&L for reinforced precast concrete cable cover class LV, type 1, flat, size 250 mm x 150 mm x 40mm all as specified and directed.

M & L for sand cushioning for protection of underground cables, consolidated and compacted with clean dry sand all as specified and as directed by Engr-in-Charge. (Note: The depth of sand shall be measured after puning only)

Supply and laying GI pipe 50mm bore light grade with fitting for cable protection at road crossing/under concrete including taking down of old one, complete all as specified and as directed.

Supply and fixing down rod fabricated out of 15mm dia heavy grade MS conduit not less than 1500 mm length with suitable 'C' clamp to both ends, one on existing MS angle and other end to be suitably connected to item No.78, duly painted with two coats of synthetic enamel black paint over a coat of red oxide primer, complete all as specified and as directed.

M&L ,for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts check nuts & washers of galvanised iron or steel, protected by GI pipe 15 mm bore (light grade) and watering pipe 20 mm bore GI pipe (Medium grade) and PCC of chamber and coping shall in 1:3:6 type C-1 using 20 mm graded stone aggregate including excavation and earth work and removal of surplus soil and filling with black cotton soil upto ground level complete all as shown in electrical plate No 3 of SSR Pt-I, 2009 with CI cover 10mm thick of size 300x300mm with charcoal dust and common salt complete and earth lead connected to panel including testing complete all as specified and directed. Note : Earth test result should not less than one ohm.

S & F IP 65 cominable type Feeder Pillar, the high flexibility of the modular enclosure sytem to allows an easy upgrading of the assembly including bus bar system at any time even after many years, made of high quality Polycarbonate PC-GFS (shock proof, rust free, corrosion free, acid and chemical resitant, fire retardant, self extinguishing, having high impact against mechanical load, made of halogen and silicon free recyclable material conform to ROHS directive 2002/95/EC, UV resistant according to IEC 61439-1, having high grade internally embedded gasket made of Polyurethane (PUR). All left or right side enclosures should have pre-moulded knockouts for side cable entry or for future extension. Each enclosure should have multi no self-threaded holes to mount mounting plate or DIN channel or any equipment.

The feeder pillar should have the following in built safety features: In this type of feeder pillars electricals functions are to be monitored and must be visible. The entire system should have de-touchable lid with pad locking arrangement and incomer should have hinged type lid and it can be combined of transparent or opaque lid. All lids should have trianglular type locking arrangement or should have Mi pad locking arrangement for psotive isolation. The bus bar system should have EMC compliant. to provide grounding/earthing in connection metal plate should be provided inside polycarbonate flange for armoured cable (SWA-steel wired armoured cable) via glands in accordance with British Standard (IS:5039).

The feeder pillar should have the following test certificate: 1. In accordance with IEC 60-439-1 (IS8623) at ASTA (CPRI Bhopal Laboratory) and IEC 61439-2 for power switch gear and control gear assembly. The party must submitted routine test certificate from manufacturer/principal company in accordance with IEC 60 439-1. The type test report as per CPRI (in accordance with IEC 60-439-1) should consist with following: (i) Degree of protection of system (ii) Temperature Rise Limit (iii) Dielectric properties (iv) Short Circuit Withstand Strength (v) Effectiveness of protective circuit (vi) Clearance and creepage distance (vii) Mechanical operation.

2). Should withstand glow wire test at 9600C in accordance with IEC 60 695-2-11 UL subject 94, should be flame retardant and self-extinguishing in nature. 3) Degree of protection against mechanical load IK 08 (5 Joule) in accordance with EN IEC 62232. 4) Rated insulation voltage shoul be 690V AC as per IEC 60664. Dependent on the System: Environment conditions for distribution boards according to IEC 61439: 5°C upto 35°C, max+ 40°C, humidity: 50% at 40°C, 100% at 25°C for empty enclosures: 25°C upto +70°C. Enclosure should be totally insulated, protection class II.

FEEDER PILLAR- Material - Thermoplastic Polycarbonate, Dimension:- 1400 [L] x 1585[H] x 620[D] mm, Degree of protection:- IP 54, Busbar rating:- 250 A (rYBN 25x06 MM) CU, System Voltage:- 415V, 50 Hz, 4 wire +E, Insulation:- Outdoor/Floor Mounting, Incomer:- 250FP 36kA MCCB-1 No, Outgoing :- 100 A FP 18/16 MCCB - 2 Nos, Metering: - R/Y/B Indication Lamp - 1 No Each, 96 Sq.mm Digital Ammeter - 1 No, 96 Sqmm Digital Voltmeter - 1 No, Current Transformer, 125/5A, 5VA CL. 1- 3 Nos, Control Fuse with Base 2/32A-6 Nos.

Note: (a) The height of panel should be 0.6 metre from ground level with PCC foundation (b) Cost for construction of platform for panel of brick masonry work in CM (!:6) with foundation PCC(1:4:8) type D-2 including plaster work, PCC coping (1:2:4) (40 mm graded stone aggregate), deemed to be included in this item rate.

upadhyay engineers and consultant