Purchase of Diesel Generator

DIESEL GENERATOR SET SUPPLY INSTALLATION AND COMMISSION

DIESEL GENERATOR SET : Power rating 82.5kVA/66kWe, 3Phase 415V 50Hz., Power factor 0.8 lagging, Current 114Amps, 1500 rpm., MoEF Certified Power(bhp) 110, Required power for Rated kVA(bhp) 105, 4 cylinder in-line liquid cooled turbo charged engine, Fuel consumption @75% load (litre/hour)-14 to 16, Fuel consumption @100% load (litre/hour)-19 to 20, Starting system 12V DC electrical battery and charging system, Alternator Voltage regulation (Max.) ±1%, Class of Insulation H Class, Winding Pitch 2/3, Rotor Dynamically Balanced , Waveform distortion/ Total Harmonic Distortion No load < 1.5 %, Non distorting, balanced linear load < 5 %, Maximum Unbalanced Load across phases- less than or equal to 25%, Telephonic Harmonic factor < 2% , Control panel manufactured with 14/16 gauge CRCA sheet and is powder coated for weather-proof and long lasting finish. (1 No) INSTALLATION: Supply and providing plate earthing as per IS 3043 with 600x600x6.30 mm GI/CI earth plate, 20 mm GI watering pipe fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel with weld mesh, filling required quantity of charcoal including construction of inspection chamber with a bed concrete of 1:4:8 PCC using 40 mm broken stone (10 cm thick), (3 Nos) 300 x 300 x 6 mm cast iron gully trap with covering (3 Nos) 25 x3 copper strip 25 x 3 mm copper strip tinned at the points of contacts (Required length) 25 x 6 mm brass bolt & nut (Required quantity) 125 A, AC 23 A, 4 pole on-load COS (1 No) 3.5c 95sqmm cable (120 m) 3.15 mm copper conductor (10 SWG) (220 m) TESTING & COMMISIONING: Preparation of layout drawing, preparation of schematic drawing for obtaining approval from Electrical Inspectorate etc. Conducting load test of 82.5 KVA DG set using water load or electrical load at various step load, full load and 10% over load for minimum 3 hours including hire and labour charges of all required materials. Warrantee –2 year Comprehensive 24x7 onsite warrantee