Loading
Loading…
Loading…
Tender Value
₹74.7 L
EMD Value
₹1.5 L
Closing Date
18 Jun 2026, 10:30 pmClosed
Bangalore Metro Rail Corporation Limited
A SHANAVAS YUSSUFF BAIG
Civil Work Related to Buildings, Maintenance Contract for Artificer works (Petty Repairs) Reach-05 metro stations
BMRCL/2026-27/BD/WORK_INDENT132
BMRCL/2026-27/BD/WORK_INDENT132
Open
Buildings
Two Tender Document System(Two Cover)
BMRCL O AND M Wing CSWL3 office Hebbagodi Banglore
4 documents required · 4 mandatory
The Tenderer should have executed the works / have experience in similar works in any of the following organizations during last five (5) years in any Central Govt ,State Govt, PSUs Govt bodies,MES/ Railway,CPWD,KPWD,Any Metro Rail Corporation, Each tenderer in its name should have in the last five financial years i.e. 2020-21, 2021-22, 2022-23, 2023-24 and 2024-25. Achieved an average annual financial turnover of Rs.22.41 Lakhs, in any Three (03) financial years in the Last Five (05) Financial Years Each Tenderer in its name should have successfully completed or substantially completed similar works as a prime contractor during last five (05) years either of One (01) similar work costing not less than the amount equal to Rs 37.35 Lakhs ii) Two (02) similar works costing not less than the amount equal to Rs 29.88 Lakhs, iii) Three (03) similar works costing not less than the amount equal to Rs22.41 Lakhs. c) Executed in the last five (05) years, the minimum Quantity of work is as follows: d)Notwithstanding the (b) above, the cumulative value of similar works executed through Individual work order issued on the basis of Quotation in BMRCL during the last five (05) years shall also be considered for determining the bidders eligibility under the similar work experience criteria provided the total cumulative value is not less than Rs 37.35 lakh.1)Similar Works means civil works related to building 2) Substantially completed works means works that are at least 90 percentage completed as on the date of tender submission (i.e., the gross value of work done up to the last date of submission is 90 percentage or more of the original contract price) and are continuing satisfactorily.3)The last five (5) years shall be counted from 28 days prior to the date of submission of the tender.4)In case the Tenderer has executed works/contracts for a client that include works other than similar works, the Tenderer shall provide a client certificate clearly indicating the value of work executed in respect of the similar works in support of the work experience claimed. 5)The Work Completion Certificate shall be certified by an Executive Engineer or an officer of higher rank and shall be considered valid. 6)The credentials of the Tenderer in case of works executed as a subcontractor can also be considered towards eligibility criteria with respect to Clause 3.2 of ITT subject to documentary evidence and able to establish traceability.
All works provided, the relevant documents for availability for this work are furnished. a) Cutting-Machine-02Nos, b) DrillingMachine-02Nos, c) Weldingmachine-02Nos, d) Concrete mixer-01 No, e) Scaffolding system set-230 Sqm.
Reports on the financial standing of theTenderer, such as balance sheet, Profit andLoss statements and Auditors reports for the last five years (Provisional Financial Statement are not acceptable.
Liquid assets and / or availability of credit facilities of not less than Rs. 22.41 Lakhs (Credit lines/ letter of credit/ certificates from banks) for meeting the fund requirement etc Clause 3.5 (b).
Each Tenderer in its name should have in thelast five financial years i.e., 2020-21, 2021-22,2022-23, 2023-24 & 2024-25 achieved anaverage annual financial turnover of Rs. 22.41Lakhs, in any Three (03) financial years in theLast Five (05) Financial Years.
Succesful Tenderer should submit the Non-Disclosure agreement (NDA)in line with annexure-8
NIL
Notarized Power of Attorney (Clause 15.4, 15.5 of ITT) / Attested copy of the Partnership deed / Ownership record to demonstrate the authority to sign the Tender submittals.
List of existing commitments and ongoing works
List of works for which tenders already submitted
Evidence of Tenderers, Eligibility andQualification Criteria (Clause 2 3 of ITT) andQualification Information (Section 3) with CAs certificationsand.
Undertakings as per prescribed Proforma given in Annexure 3, 4,5 and 6 in section-10.
Form of Tender on firms Letter head (Clause10 of ITT).
List of works executed and payments.
Copy of PAN card.
Constitution or legal status of Tenderer as per clause 1.1 of Section 3
Copy of GST registration certificate
₹1,870
₹1.5 L
16 May 2026
16 May 2026
19 Jun 2026
25 May 2026
Maintenance Contract for Artificer works (Petty Repairs) from Ragigudda to Delta Electronic Bommasandra (Excluding Infosys Foundation Konappana Agrahara Metro station)
Schedule A: Execution of all works as in KPWD SCHEDULE OF RATES 2023-24, (Vol. 1, 2, 3 & 5) PWP & IWTD, South Zone, BANGALORE, vide specified in technical specification and as directed by Engr-in-Char...
Providing and laying precast RCC cement concrete slabs of 100 mm thickness in 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate of 6 mm nominal size), reinforced with 8 mm diameter ba...
Providing and fixing self-driven screws of adequate length, complete with nylon washers, and sealing the top with silicone sealant,with all safety equipment’s and risk.
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all co...
Providing and fixing the toughened glass of 12mm thick in to existing D brackets stainless steel fittings of hand rails, this works includes 12mm toughened glass, edge polishing, making holes for fitt...
Providing and fixing of 3M stickers or PU painting on steps, landing and slab etc. Including cleaning surface as directed by engineer in charge
Fabrication, providing and erecting in position of M.S Ornamental decorative post barricade using 140mm Dia 3mm thick 750mm height including top covering and 50mm ball. the post is embedded in concret...
Fixing of existing granite skirting tile with Roff cement after chipping the surface, fixed to the existing level including materials, Labours ,lead, lift etc as per engineer in charge
Providing and fixing partition with 6mm toughened plain glass using MS frames of 72x72x3.2mm thick and Aluminium clips/angles, rubber beading, sealant etc., all powder coated finish as per site requir...
Buffing of existing polished granite floor surface to make into antiskid surface for the passenger’s movement area. Buffing to be done with grinding machine includes tools, equipment’s, labours et...
Providing and fixing 6mm thick toughened glass for windows including all fixtures, labours, tools and transportation. Etc., as directed by Engineer in-charge
Repairing of existing rolling shutter duly dismantling wherever required, which includes cutting, welding, grinding, cleaning, removing of bends, greasing, oiling, servicing, tightening of nuts & bolt...
Supplying and installation of approved Nylon net Mesh for Bird entry at fresh air shaft and other locations. The net having 25mm gap and 3mm thick, avg 8mm dia rope at edge to be provided for fixing a...
Greasing of rolling shutter parts any size with good Quality Grease including cost of materials, labours, tools, and scaffolding etc.
Providing and fixing in position clear / plain 6 mm thick clear acrylic sheet for covering the rain water on the roof /platform/concourse/Ground level over a frame with powder coated M.S. Box section ...
Supplying of Tile/granite laying worker, for repairing work at designated Metro station, including tools and consumable complete, as per the instruction of Engineer in charge
Alignment of aluminum/UPVC doors by removing hinges and refitting the same properly including cost of labours, tools and transportation.etc.,
Providing and fixing High pressure Laminate (HPL) with table rubbed, edges rounded and polished, of height 900mm , 320mm wide and thickness 15mm in urinal partitions fixed flush to the wall with suita...
Providing core cutting of 75mm/90mm dia upto 450mm deep on platform etc., Including cost of all materials, labour, loading, unloading, lead, lift, transporting etc., Completely as per engineer in-char...
Covering various size of pigeon entry gaps at different location of external wall surface of 25x25x1.6 mm weld mesh framed with MS 25x3 mm thick flat /frame 25x25x1.6mm all-round the mesh including pa...
Providing and fixing of circular SS grating of size 6"(inch) to existing weep hole connected to drainage. Making the surface depression by chipping the pavement and finishing with cement mortar, grati...
Removing the existing worn out laminate sheet from false flooring and providing 3mm thick wood brown shade high pressure laminate sheets etc., complete as directed by Engineer-in-charge.
Supply and fixing of frosted glass film to doors and window glass including cost of materials, labours, T&P, etc., complete as directed by Engineer in charge
Clearing the blockage in chamber by acid washing and cleaning including cost of materials, labours, tools complete as per specifications.
Providing and fixing satin stainless steel "D" shaped door handle of 250/ 300 mm length. Rates including all materials, labour and tools etc. to complete the work as directed by Engineer- in charge.
Supply & fixing health faucet 15 mm Dia (jet spray) with flexible LDPE pipe with jet of 1.5m long on one side and socket joint of 15mm Dia on other end, nozzle of jet shall be chromium plated etc comp...
Providing and Fixing Stainless steel Tower Bolt of size 25*170mm with 8mm dia rod. Rates including all material Labour and Tools etc, to complete the work as directed by Engineer- in charge
Providing and fixing stainless steel ball bearing flat button hinges of size 100mmx75mmx3mm with holding capacity of 18kg each rate including all materials, labour and tools etc. to complete the work ...
Providing and fixing of aluminium tower bolt of size 4'' to restroom doors, including materials, tools and labours etc. as per engineer in charge
Providing and fixing door closer heavy duty grade with silver finishing of 215* 50 mm size with holding capacity of door weight 850 to 1100kg and having maximum door opening angle of 110 degree with f...
Providing and fixing "Yale or Equivalent" External Trim lock including fixing measures complete as directed by engineer in charge,
Providing and fixing mortise sash lock with S.S lever handles suitable for 120 minutes fire rating door. Rate including all materials, labour and tools etc to complete the work as directed by engineer...
Providing and Fixing minimum Length 840mm Push Bar including fixing measures complete all as directed by Engineer- in -charge
Providing and Fixing Mortise Dead Lock of 55mm back set dead lock with 20mm sticker plate with satin stainless-steel grade. Rates including all materials, labour and Tools etc. To complete the work as...
Removing and Re fixing of existing Door closer with proper alignment including fixing measures complete all as directed by engineer in charge
Removing of existing Aldrop and supplying, fixing of New approved 300mm length Stainless Steel 304 Grade martial Aldrop of length 350mm, including cost of materials, tools, labours, etc. complete and ...
Supply and installation of Signage required size eco solvent printed vinyl over the existing ACP/Acrylic sheet /wall including all materials, transportation, labour, T&P etc. complete and as directed ...
Supply and installation of Signage boards of required size eco solvent printed vinyl of approved art work over 3mm thick acrylic sheet wall mounting type including all material, transportation, labour...
Supplying of Red soil for garden to designated Metro station and spreading the soil uniformly at the said location, including cost of materials, transportation, labour, loading and unloading, etc., co...
Cutting the existing granite flooring in 100mm width without damaging the surrounding floor and removing debris by chipping for a depth of 100mm approximately and disposing the debris upto 2km away fr...
Supplying of fabricator for steel (MS or SS) repair works at designated metro station, including tools and consumables complete as per the instruction of engineer in charge.
Cleaning of GI/MS Gutters of any size, free from dust, silt, algae, debris etc, including removal of blockages if any, tightening of clamps, loose screws, nuts, tack welding where ever required fixing...
Providing and fixing of Urinal push cock by Replacement of existing urinal sensors using brass Jaquar auto closing valve, 1/2 inch Stainless steel pipe fixtures like elbow, collars, union, pipe of jag...
Cleaning and removal of debris lying inside the station premises, including lead, lift labour’s and tools complete and disposing away from city premises and as directed by Engineers in charge. ( Tra...
Transportation charges
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Petty tender Teach-05.pdf
Tender Document • 27.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .