Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹5.5 L
EMD Value
₹6,000
Closing Date
16 Nov 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, Panchayat (R and B) Division, Navsari
Year 2026-27 Repairing Of Primary Veternary Center At Bilimora Ta. Gandevi Dist. Navsari
364013
13 of 2026-27
Open
Civil Works - Buildings
Works
Navsari
6 documents required · 6 mandatory
₹900
Executive Engineer, Panchayat (R and B) Division, Navsari
₹6,000
6 Nov 2026
6 Nov 2026
6 Nov 2026
16 Nov 2026
6 Nov 2026
120 days
Name of Work:- Year 2026-27 Repairing Of Primary Veternary Center At Bilimora Ta. Gandevi
: : BILL OF QUANTITY.' : :
Percentage Rate Tender
It. Description of Item (with brief Specification and Rate In
Quantity Unit Amount
No. reference to book of specifications) Figures
1 Demolition of Brick work and stone masonry 3.30 Cum. 564.16
including stacking of serviceable materilas and
disposal of unserviceable materials with all lead and
lift.(ii) In Cement Mortar.
2 Dismentling doors, windows, ventilators etc. (wood 23.70 Nos. 192.41
or steel) shutters including chowkhats architraves,
holdfasts and other attachment etc. complete and
stacking them within all lead and lift.(i) Not
exceeding 3 Sq.M. in area.
3 Removing and scraping of old deteriorated plaster of 226.40 Sqmt 20.06
any thickness fromm wall / R.C.C member including
stacking of serviceable material and disposal of
unserviceable from site of work with all lead and lift
4 Dismentaling tiled of stone floors laid in mortar 13.24 Sqmt 49.41
including stacking of serviceable materilas and
disposal of unserviceable materials with all lead and
5 Brick work using hydraulically pressed common 5.20 Cum. 4444.59
burnt clay building brick having crushing strength not
less than 35 kg/sq. cm. in super structure above
plinth level up to floor two level in cement mortar 1:6
( 1 Cement: 6 fine sand) (B) Convention for F.F
6 Providing and fixing 35 mm thick shutters for Doors, 17.60 Sqmt 5338.30
windows and clerestory windows including Indian
teak wood frames 10 cm x 7 cm. size including
black enamelled iron oxidixed fixtures and
fastenings including primer coat of approved quality
and two coats of oil painting etc, complete. (ii) Fully
7 Providing and fixing FRP frame size 125x65 mm 1.90 Sqmt 2019.98
and 35mm thick FRP shutter with wood grain raised
panneled design finish shutter having extra
reinforcement on sides & edges in Gel coat finish.
The core of the shutter & frame is to be filed up with
injected polyurethene foam done in situ alongwith
embedded wooden pieces for stiffening & also
taking hinges & fintures. The whole FRP frame &
shutter is to be water proof weather proof, termite
proof & resistance to mild acid/alkali. Rates are to
be inclusive of S.S hinges with fastener sleeve &
alluminium fixtures & fastenings.
8 Providing and fixing standared extruded of 0.40 Sqmt 1175.55
alluminium section of size 63mm x 38.10mm x
1.2mm (Jindal Section :2434, @ Wt. 0.643 Kg/mt)
with colour Powder Coated alluminium frame for
ventilation with 5 mm thick frosted glass as details
etc complete for Ventilation
9 Providing 15mm thick cement plaster in single coat 44.90 Sqmt 225.50
on Rough (Similar)side of single or half brick walls
for interior plastering upto floor two level and
finished even and smooth in (ii) Cement mortar 1:4
(1-cement :4-sand) and Extra add for finishing with
a floating coat of neat cement slurry with all lead and
10 Providing 10mm thick cement plaster in single coat 15.12 Sqmt 179.53
on brick/concrete walls for interior plastering upto
floor two level and finished even and smooth in (ii)
Cement mortar 1:4 (1-cement :4- sand) and Extra
add for finishing with a floating coat of neat cement
slurry with all lead and lift.
11 Providing 20 mm thick double coat mala cement 191.30 Sqmt 279.29
plaster on interior brick / concrete work for
plastering comprising of base coat of 12 mm thick
cement plaster in cement mortar (1 Cement :
coarse sand) in rough finishing and 8 mm thick top
coat of cement mortar 1:2 (1 Cement : 2 Coarse
sand) finished with trovel including scaffolding
curing etc. complete.
12 P & L 24" x 24" vitrified 8 mm thick tile flooring over 3.30 Sqmt 1432.78
20 mm (average) base of cement mortar 1:6 (
cement: 6 coarse sand) on new surface or fixing on
existing flooring by adhesive material including
dismentaling of existing flooring and jointed with
color cement slurry including finised with flush
pointing & cleaning the surface etc. complete for
13 Providing and laying Ceramic tiles 6mm thick 9.98 Sqmt 997.88
(vitrified 8 mm thick tile) in skrting risers of steps
and dedo on 10mm thick cement plaster 1:3 (1-
cement : 3-coarse sand) and jointed with white
14 Providing and laying water proofing treatment with 65.00 Sqmt 1163.62
broken china mosaic flooring by conventional
method including cleaning the slab surface by wire
brush as directed including provding first layer of
C.M. 1 :4 of 40 mm thickness mixed with water
proofing compound at rate prescribed by
manufacturer, including putting of brick bats of
average thickness 40 mm Well immerssed in water
laid uniformly on first layer of mortar including
applying cement slurry @ rate of 0.08 bag/sqm. on
fixed layer of brick bats including maintaining
necessary slope, in second layer 40 mm thick C.M
:4 mixed with water proofmg compound as directed,
including fmishing smooth with cement slurry as
directed complete.and using 12 mm to 20 mm
broken pieces of Glazed tiles to be paid over
cement mortar 1:3 to plain or slope and to be
tempered to bring mortar creme out up to surface
using white cement including rounding offjunctions
and extending them up to 15 cm along the wall,
clearing with water and oxalic acid etc. as directed.
15 Providing & laying and jointing in true line and level 10.00 Rmt. 148.12
40 mm dia UPVC pipe (SCH-40) line including fitting
make or equivalent as approved by engineer in
charge the pipe shole be fixed on wall with the hel of
clam at every two mtr center to center or shall be
conseled as direct including necessesary fitting etc
including testing of pipe and jointes and fixin the
sam with adhesive solvent including cost of matarial
(A) 40 mm OD pipe
16 Providing & laying and jointing in true line and level 10.00 Rmt. 91.84
25 mm dia UPVC pipe (SCH-40) line including fitting
make or equivalent as approved by engineer in
charge the pipe shole be fixed on wall with the hel of
clam at every two mtr center to center or shall be
conseled as direct including necessesary fitting etc
including testing of pipe and jointes and fixin the
sam with adhesive solvent including cost of matarial
(A) 25 mm OD pipe
17 Providing & laying and jointing in true line and level 20.00 Rmt. 72.65
15 mm dia UPVC pipe (SCH-40) line including fitting
make or equivalent as approved by engineer in
charge the pipe shole be fixed on wall with the hel of
clam at every two mtr center to center or shall be
conseled as direct including necessesary fitting etc
including testing of pipe and jointes and fixin the
sam with adhesive solvent including cost of matarial
(A) 15 mm OD pipe
18 Providing and fixing Wash down Water closet 1.00 Nos. 4642.16
European type W.C. pan with integral P or S trap
including jointing the trap with soil pipe in cement
mortar 1:1 (1 cement : 1 find sand) (A)Viterous
china pattern - I (i)in white colour With Providing
and fixing 12.5 litres low level flushing cistern with a
pair of C.I. or mild brackets complete with fittings
such as lead value less syphon 15 mm nominal size
brass ball valve with polythene float C.P. brass
handle unions and couplings for connection with
inlet, outlet and overflow pipes. 40 mm dia porcelain
enamelled flush bend including cutting holes in walls
and making good the same conecting the flush bend
with cistren and closed Providing and fixing plastic
seat and cover for wash down water closet with C.P.
brass hinges and rubber buffersProviding and fixing
toilet paper holder(A) C.P. brass.Providing and
fixing screw down bib taps of follwing size(B) Brass
chromium plated screw down bib tap(i) 15 mm dia
19 Providing and fixing wash basin with single hole for 1.00 Nos. 1456.06
piller tap with C.L. or M.S. brackets painted white
including cutting holes and making good the same
including piller tap brass waste, stopckok and MI
fisher union fitting waste pipe:(ii) flat back wash
basin 500mm x 400mm size including all nesessary
20 Providing and fixing screw down bib taps of 3.00 Nos. 186.83
following size of jaquar brand product as approved
by engineer in charge (I) 15 mm dia.
21 providing and fixing SWR nanhi trap of the following 1.00 Nos. 629.38
nominal dia of self cleaning design with C L screwed
down of hinged grating including cost of cutting and
making good the walls floos 100 mm inlet and
mm out let etc complete
22 Providing and fixing S.W. gully trap with C.I. grating 1.00 Nos. 1246.92
brick masonry chamber and water tight C.I. cover
with frame of 300mm x 300mm size (inside) with
standard weight.(i) Square mouth traps.(B) 150mm
x 100mm size P or R type
23 Providing and fixing 600mm x 450mm bevelled 1.00 Nos. 830.37
edge mirrror of superior glass mounted on 6mm
thick A.C. sheet or plywood sheet and fixing to
wooden pluge with C.P. brass screws and washers.
24 Providing and fixing C.P. brass towel rail comlete 1.00 Nos. 603.19
with C.P. brass brackets fixed to wooden plugs with
C.P. brass scews.(B) 600mm x 20mm size.
25 Providing and fixing toilet paper holder.(A) C.P. 1.00 Nos. 349.46
26 Providing and fixing brass screw down stop tap.(C) 1.00 Nos. 220.82
27 Providing and fixing to wall ceiling and floor 10.0 Kg. 10.00 Rmt. 339.05
F/Cm2 working pressure poluthene pipes of the
following outside Dia. Low densidy, complete with
special falnge compression type fittings, wall
clipsetc. including making good the wall ceiling and
floor.(G)110 mm
28 Providing and fixing to wall ceiling and floor 10.0 Kg. 10.00 Rmt. 280.23
F/Cm2 working pressure polythene pipes of the
following outside Dia. Low densidy, complete with
special falnge compression type fittings, wall
clipsetc. including making good the wall ceiling and
29 Constructing brick masonry chamber for 1.00 Nos. 3660.76
underground C.I. Inspection chamber and bends
with briocks having croshing strength not less than
35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light
duty) 455mm x 610mm intenal dimensions total
weight of cover with frame to be not less than 38Kg.
(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )
(R.C.C. top slabe with 1:2:4 mix (1-cement :2-
coarse sand :4-graded stone aggregate 20mm size)
foundation concrete 1:5:10 inside plaster 15mm
thick with cement mortar 1:3 finished smooth with a
floating coat of neat cement on walls and bed
concrete etc. complete.(ii) Inside dimensions
500mm x 700 mm and 450mm deep for pipe line
with one or two inlets.
30 providing and fixing in position cowl vent to pipe (II) 1.00 Nos. 505.17
31 Providing and fixing G.I. Rain water spout of 50mm 4.00 Rmt. 101.91
dia. and 30cm. length.
32 Removing dry or oil bound distemper by a washing 155.99 Sqmt 11.58
and scraping and sand papering the wall surface
smooth including necessary repairs to scratches
33 Applying two coats of Birla (white cement based) or 145.31 Sqmt 40.59
Asian (acrylic lapy- putty) or equivalent & two coats
of primer of approved brand and manufacture on
new wall surface to give an even shade including
thoroughly brushing the surface free from mortar
dropping and other foreign matter and sand papered
34 Wall painting (two coats) with plastic emulsion paint 145.31 Sqmt 81.05
of approved brand and manufacture on undecorated
wall surface to give an even shade including
throughly brushing the surface free from mortar
droppings and other foreign matter and sand
papered smooth.
35 Distempering with dry distemper of approved brand 56.51 Sqmt 81.05
and manufacture ( Two coats ) and of required
shade on wall surface to give and even shade, over
and includung a priming coat of whiting after
toroughly brooming and other foreing matter on
celling and soffits slab.
36 Finishing wall with weather proof exterior emulsion 191.30 Sqmt 117.40
paint on wall surface (two coats) to give an required
shape even shade after thoroughly brushing the
surface to remove all dirt, and remains of loose
powdered materials.etc complete
37 painting two cosat (including priming coats) on steel 12.30 Sqmt 128.49
and other metal surfece with enamel paint,brushing
interior to give an even shade including cleaning the
surfece of all dirt,dust and other foreign matter.
38 Constructing Brick masonry road gully chamber 1.00 Nos. 2017.19
500mm x 450mm x 600mm including 500mm x
450mm C.I. horizontal grating wih frame complete.
39 Steel work, riveted in built up sections framed work 17.90 Qui 5889.50
including cutting, hoisting, fixing in position and
applying a priming coat of read lead paint. (A) In
beams and joists, channels angles Tees, flats, with
connecting plates or angle cleats as in main and
cross beams. Hip and jack rafters, purlins conneted
to common rafters and the like.
0 Providing corrugated G.I. sheet of class-3 roofing 74.60 Sqmt 734.19
fixed with glavanished iron J or L Hooks, Bolts and
nuts 8mm diameter with bitumen and G.I. limpet
washer or G.I. limpet washer. filled with white lead
complete excluding the cost of purlins, Rafters and
Trusses.(1) 0.80 mm thick sheet.
Providing & fixing Executive Table having size of 1.00 Nos. 11161.51
1520 mm X 900 mm X750mm (Height) for work
station using 19 mm thick allproof plywood of BWR
confirming to IS 710 of green or century make,
designs & grooves as directed by architectural
drawings with Top 12mm toughened glass in
required size including three drawers Size
mm X 450 mm X250mm (Height) Side Rack with
mm lamination in single or double shade & colour as
directed on all visible face and 0.80 mm white
lamination on all non visible faces Hettich make
telescopic sliding channel, Enox make , S.S.
Decorative handle, with necessary fixtures &
fasteners of standard make as per detail drawing
and image also including all labours as approved by
engineer-in-charge etc. complete.
2 Visitor chair 4.00 Nos. 3535.00
JALARAM make visitor chair with P type handle,
Non revolving oval shape with metal steel powder
quoted visitor chair. Overall size: W-70 x D-70 x H-
113-123 (cm) Our chairs are tested by approved
Laboratories & Certified by ternational Agency
BIFMA confirming to ANSI/BIFMA X 5.1- 2002 on
functional requirement.
3 Writing letter or figures on any surface with black 1000.00 Litre 3.60
japan paint (stops,comas, hyphens and the like not
to be measured and paid for separately) (ii) Indian
(Letters/Figures)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Building booklet.pdf
SBD.pdf
Sch-B Bilimora Vaternary.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .