WBPWD/AE/NKHESD/NIQ- 07/Q of 26-27

Supply of 2/4 Core XLPE Insulated & Sheathed Armoured stranded Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [Make Polycab / RR /KEI/ Havells/ Gloster as approved by E.I.C] 4 Core 35 Sqmm

Laying of cable from 4 core 35 sqmm on wall/ surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting

Supply and fixing compression type gland For 35 sqmm 4core complete with brass gland brass ring and rubber ring for dust and moisture proof entry of XLPE/PVC armoured cable.

Finishing the end of following XLPE/PVC armoured cables bycrimping method incl. supplying and fixing solderless socket(Dowels make), tapes, anticorrosive paste & jointing materials. For 35 sqmm 4core

Supplying and fixing Change over switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc 100A (Havlls/L-K/Siemens/Legrand)

Cost of labour charges for dismantling the existing installations incl LT Panel at G Floor & mending good the damages as to GS with engaging 1 no skill and 2 nos semi skill technicians

Supplying and fixing double door 6 way Vertical TPN MCB Distribution board for 160 A MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment, including Supplying and fixing double door sheet steel (16SWG), powder coated top and bottom end box for TPN DB vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment (Make: Legrand/L K/Siemens) Incoming: 160A, 415V, 35KA FP MCCB-1nos Out going 63A, 415V, 10KA & C curve TPMCB-4 nos 100 Amp, 415V, 10KA & C curve TPMCB-2 nos (IPD Building Incommer Panel)

Supplying and fixing double door 6 way Vertical TPN MCB Distribution board for 100 A MCCB incomer with IP-42 /43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Interconnection with suitable size of copper wire and neutral link & provision for earthing attachment, including Supplying and fixing double door sheet steel (16SWG), powder coated top and bottom end box for TPN DB vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment (Make: Legrand/L-K/Siemens) Incoming: 100A, 415V, 35KA FP MCCB-1nos Out going 63A, 415V, 10KA & C curve TP MCB-2 nos 32A, 415V, 10KA & C curve TP MCB-2 nos 6-32A, 240V, 10KA & C curve SP MCB-6 nos ( For IPD, OPD Lift )

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box andmending good the damages to original finish. - Average run 6 mtr (E-14, 2b)

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box andmending good the damages to original finish On Board (E-15 -4a)