Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.5 LAccepted-AOC VILL KASHNI NEAR AANCHAL DAIRY PO BIN PITHORAGARH UTTARAKHAND PIN 262508 | PITHORAGARH | PITHORAGARH | UTTARAKHAND | 262508 | L1 | Accepted-AOC Lowest quoted bidder. | |
| 2 | L2₹40.8 L+₹94,500 (2.37%)Rejected-Finance | L2 | Rejected-Finance Higher quoted bidder. | |
| 3 | L3₹53.1 L+₹13.2 L (33.1%)Rejected-Finance 38 BHARKATIYA JOSHI NEAR POST OFFICE JHULAGHAT ROAD PITHORAGARH UTTARAKHAND 262520 | PITHORAGARH | PITHORAGARH | UTTARAKHAND | 262520 | L3 | Rejected-Finance Higher quoted bidder. |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
26 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Pithoragarh
GE Pithoragarh Post Bharkatia Pithoragarh ( UK)PIN-262520
COMPREHENSIVE MAINT TO CERTAIN BLDGS OF APS AND ARTY UNIT LOCATION AT MIL STN DHARCHULA UNDER GE PITHORAGARH
2022_MES_541559_2
8476/DHR/E8
Open Tender
Civil Works
Item Rate
330 days
GE Pithoragarh
Class D, Category a(i)
6 documents required · 6 mandatory
₹500
GE Pithoragarh
₹98,000
Yes
20 Dec 2022
5 Sept 2022
3 Oct 2022
5 Sept 2022
26 Sept 2022
12 Sept 2022
60 days
Amount
DESCRIPTION OF ITEMS
Demolition of cement concrete in ground floor,paving nexc 15mm thick (below or above GL) complete all as specified and directed
Roughening surfaces of old concrete floor by picking ,sweeping clean and washing down with water to remove dust etc.
Demolition of brick work, stone/boulder masonary built in cement mortar complete all speecified and directed
M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6 m mean radius, built in cement mortor 1:6 complete all as spfd & directed.
M&L cement concrete 1:4:8 type D2 (40 mm gradede agg) in foundation, filling and mass concrete complete all as spfd & directed.
M&L for cement concrete type C-2, 1:3:6 (40 mm graded stone aggregate 75 mm thick as in plinth protection all as specified and directed.
M&L providing cement concrete 1:2:4 type B1 (20 mm gradede agg) in lintels upto 1.50m clear span, cills, steps; seismin and other similar bands, plinth courses, string courses, lacing courses, parapeta and railings upto 60cm height, copings, kneelsers, apex stones, bed plated, kerb, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as spfd & directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
M&l for vitrified ceramic tiles 10mm thick (Square/Rectangular) polished area of each tile no exc 0.36 Sqm in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or colouredf cement to match the shades of tiles complete all as specified and directed.
M&L for coloured glazed ceramic tiles in verticla surface, 450x350x7mm thick set and jointed in neat sement slurry and pointed in white or colour cement to match over 10 mm thick plaster in CM 1:4 complete all as spfd & directed.
M&L for providing Kota stone slab 20 to 25mm thick machine cut and mirror polished to size and fixed in floor and set and jointed in neat cement slurry and pointed with grey cement to match the stone over and including 15mm thick screed bed in CM (1:6) for floor complete all as specified and directed..
M&L for Chequered cement concrete tiles 20cm x 20 cm x 25 mm thick set, jointed and pointed in neat cement slurry with grey cement and pigments in floor including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed
Taking down cement plaster on brick or stone walls, of any description including raking out joints, hacking for key, scrubbing down with water, etc complete all as spfd and directed.
M&L 10 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for Preparing new surfaces, plastered or unplasterd old decorated wall surfaces and applying two coat of oil emulsion distemper over a coat of plaster of paris putty of 1mm thckness over plastered surface to prepar the surface even and smooth complete all as specified and directed.
M&L for preparing newly plastered surface of wall apply two coat of cement base paint over a coat of white wash complete all as specified and directed
M&L three coats of white wash on wall surfaces including prepration of new plastered surfaces complete all as specified and directed
S&F in repairs vitrous china wash basin,white flat back size 550X400mm including pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks, 32mm in size Waste fittings, brass, chromium plated and brackets fixing in position complete all as specified and directed.
S&F in repairs vitrous china wash down water closetpan (padestal pattern) white colour(excluding cistern), complete all as specified and directed
S&F in rep vitreous china squatting pan "Orissa pattern" size 580 mm x 440 mm white with integral foot rests, incl provn of lime concrete bedding complete all as spfd & directed.
S&F PVC flushing cistern low level white with inlet pipe,ball valve,float valve and handle including brackets and PVC flush pipe 32 mm dia fixed in repairs complete all as specified and directed
S&F in rep sinks made of stainless steel 1 mm th kitchen or laboratory with plugs, washers & waste coupling, incl bedding in CM to dwarf wall or incl fixing cantilever brackets & connecting union to pipe over all size 495x420mm bowl size 410x330 mmx160 mm complete all as spfd & directed.
S&F in repairs bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass furrel and fixed 15mm dia complete all as specified and directed.
S&F in repairs bib taps chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass furrel and fixed 15mm dia complete all as specified and directed.
Supply and Fix in repair brass CP angle stop cock 15 mm dia complete all as specified and directed.
S&F 15 mm Stop valves, cast copper alloy, screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs complete all as spfd & directed.
S/F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs complete all as spfd & directed.
S/F Swivel shower of PTMT any colour for fixng with 15mm pipe along with shower arm 15mm size 195mm long with bend of 45 degree with flage of PTMT any colour,fixed in repairs complete all as spfd & directed
M&L for 32mm in size Waste fittings, brass, chromium plated for stainless steel sinks, glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in reapirs
M&L for 40mm in size Waste fittings, brass, chromium plated for stainless steel sinks, glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in reapirs
S&F PVC connections 15 mm size with PTMT nuts of length 600mm long fixed in repairs all as spfd and as directed.
S&F PVC waste pipe 32/40 mm dia for wash basin/kitchen sink in repairs complete all as specified and as directed.
M&L for PVC (SWR) floor trap, 75mm diameter of outlet, plain with grating including jointing with solvent fixed in reapirs cement all as spfd and directed.
S/F 15 mm bore GI tubing with all fittings medium grade fixed to wall or laid in floor etc including taking up or down 15 mm GI tubing complete all as spfd & directed
S&f in repairs Health Faucet (ABS Body) MS, Chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.
S&F in repairls plastic water closet seat, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging devise complete all as specified and directed.
Supply and fix in repairs gun metal, globe or gate vlave 15mm dia bore with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed
Supply and fix in repairs Stainless steel soap dish, any type fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&f in repair for 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and as directed .
-Ditto- but 110 mm
Supply and fix 1000 Ltr rotational moulded polyethylene water stotage tanks ( cylinderical vetrticle with closed top) hoisted & fixed in position including dismantling water tank capacity exc 500 ltrs but nexc 1000 ltrs and removing to stores complete all as specified and directed
Supply and fix 500 Ltr rotational moulded polyethylene water stotage tanks ( cylinderical vetrticle with closed top) hoisted & fixed in position including dismantling water tank capacity exc 2500 ltrs but nexc 500 ltrs and removing to stores complete all as specified and directed
Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.
Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.
M&L for 30 mm thick plain, framed pannelled shutters (any number of of panels), with panels with panels of timber flat on both sides (feather edged), or of venered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkhat complete all as specified and directed.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing all as specified.
S&F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified.
S&f powder coated aluminium window and ventilator shutters sliding type with 3 track sliding shutter aluminium section weighing 0.55 Kg/M including necessary jointing cleats glazing clips, rubber packing, anodized aluminium snap beading screws roller handle and locking device etc complete all as specified and directed.
S&f powder coated aluminium door shutters, aluminium section weighing 0.55 Kg/M including necessary jointing cleats glazing clips, rubber neoprene packing, handle 2 Nos in each door, hinges anodised aluminium snap beading screws etc complete all as specified and directed.
S&f powder coated aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc, screws hinges, brackets dash fastners/raw/plugs etc complete all as specified and directed.
S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc .50 sqm in each panels complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or descrption) from metal frame including punching or driling outold glazing pins/springs and providing new ones.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F Figured glass, pinheaded type 4mm thick in square n exc 0.5 sqm each pane all as specified.
S&F 100 mm mild steel but hinges medium weight,cold rolled complete all as specified and directed
ditto but75 mm in size complete all as spfd and directed.
S&F 150 mm aluminium handles, cast type anodised complete all as specified and directed.
S&F 150 mm aluminium anodised barrel tower bolts extruded section complete all as specified and directed
S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple 9bolt type) and fixing bolts of extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed
S & F in repairs 100 mm mild steel but hinges medium weight, cold rolled to wooden/steel frame of door/windows fixed with screw or welded complete all as specified and directed.
S & F in repairs 150 mm Mild Steel pressed handles, oval type stove enamelled complete all as specified and directed.
S&F in repairs 150 mm aluminium anodised barrel tower bolts extruded section complete all as specified and directed
S&F in repairs 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple 9bolt type) and fixing bolts of extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed
S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floors 150mm long all as specified and as directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc all as specified and as directed.
S&F roof trusses (framed), trussed, purlins, crane gantries, rails and gastenings and heavy brackets framing (beam, tee, angle channel or flat sections) (Fe-290 Gde E-165) inicluding distance pieces, cleats etc.
M&L for mild steel framed wk as in doors or gates of angle iron or other section complete drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding with & incl either hooks & hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rail sand suides) & hanging, also fastening & fixing Fe-290, Gde-165 complete all as spfd & directed.
Taking down wall panelling and similar work as in kitchen cabinet/cupboard all as sfd and as directed.
M&L for 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as spfd and directed.
S&F 6mm thick teak wood lipping fixed with nails to block board or veneered particle board all as spfd and directed.
S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised (width of flaps 30mm) all as specified.
S&F 40mm dia cupboard knobs fixed with nut, screw and washer of mild steel bright finished complete all as specified and directed.
S&F catch magnet for cupboard shutter complete all as specified and directed.
Dismantling of wall and celing boards/AC sheets in any thickness & any position including cover fillets complete all as specified and directed
M&L for 6mm thick Plywood, grade BWR, type BB, fixed in ceiling and walling with screws to timber frame work complete all as sfd and directed.
Dismanteling of timber scantling 40 sqcm and over in section in any position for unframed works complete all as specified and directed
M&L for 2nd class hard wood as in scantling clean sawn framed & fixed as in ceiling and walling wks, complete all spfd & directed.
Dismantling of timber scantling 40 Sqcm under in section in any position, fixed with nails unframed work complete all as spfd & directed.
M&L for II nd class hard wood plain fillets squaree or rectangular in section clean sawn secured with nails sectional area exc 13 sqcm and n.exc 25 sqcm complete all as specified and directed
M&L II nd class hard wood plain fillets square or rectangular in section cleansawn but bullnosed chamfared or rounded on one edge or face sectional area exc 3 sqcm and nexc 6 sqcm secured in nails complete all as specified and directed
M&L for one coat of creasote oil to wooden surfaces new or old of any description including prepration of surfaces complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting of any guage/thickness in roof covering/wall clading complete all as spfd and directed
S/F 0.63 mm th galvanised corrugated mild steel sheeting with two corrugation side lap fixed with 'L' type or 'J' type or cranked hook bolts class 8 complete all as spfd & directed
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M & L preparing old previously treated surfaces of corrugated/plain sheets as in roof covering /wall over 10 cm girth or width by cleaning straightening if any removing rust and making good where required and applying one coat of synthetic enamel paint on old steel surfaces complete all as specified and directed.
M&L for two coat of synthtic enamel paint over a coat of pink primer to new wooden surface of any description exc 10 cm girth or width including prepration of new wooden surfaces complete all as specified and directed
M/L for one coats of synthetic enamel paint of any description over 10 cm in width or girth incl preparation of old steel surfaces complete all as spfd and directed.
M/L for two coats of synthetic enamel paint over a coat of red oxide primer to new steel surfaces of any description over 10 cm in width or girth incl preparation of new steel surfaces complete all as spfd and directed.
Taking down carefully u/s copper/aluminium point wiring (light, fan, socket or power) complete and making good disturbed surfaces of walls, floors etc. complete all as specified and directed.
M&L point wiring with 1.5 sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor FRLS cable in open/surface casing capping or PVC conduit of suitable size, complete with all accessories /fitting and heavy duty PVC terminal switch board for mounting switches sockets of suitable size with plastic module sheet top cover open recessed on all and brass screw and washer including unsheathed single core PVC insulated cable green in colour 1.5 sqmm multistranded copper conductor as contineous earth wire and connecting to earth dolly complete all as specified and directed for: One light point/Fan point/bell point controlled by one way switch of 5/6 Amps.
Ditto but One 3/5 pin socket outlet point on same board controlled by one way switch of 5 Amps but with cables 1.5 sqmm size.
Ditto but One 3/5 pin socket outlet point on independent board controlled by one way switch of 5 Amps but with cables 1.5 Sqmm size.
M & L power point wiring with 4 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor cable in PVC conduit of suitable size, in open surface type complete with all accessories /fitting and heavy duty PVC terminal switch board for mounting switches sockets of suitable size with plastic module sheet top cover open recessed on all and brass screw and washer including unsheathed single core PVC insulated cable green in colour 4 Sqmm multistranded copper conductor cable as earth wire and connecting to earth dolly complete all as specified and directed.
S&F in repair switch piano flush button single pole one way 5 Amps complete all as specified and directed.
S&F in repair switch piano flush button single pole one way 15Amps complete all as specified and directed.
S&F in repair socket out let 3 pin 5/6 Amps flush type complete all as specified and directed.
S&F in repair socket out let two in one 3 pin 5/6 Amps and 3 pin 15/16 Amps, flush type, non shutters, non interlocking complete all as specified and directed.
S&F in repair Ceiling rose, surface bakelite, AC, 60x30mm, 3 terminals complete all as specified and directed.
S&F in repair lamp holder PVC/poly carbonated type with back plate suitable for pendants /angular /batten fittings complete all as specified and directed.
S&F in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and directed.
S&F in repair sheet metal enclosure for DB SPN 4 way 240 Volts, single door suitable for housing MCBs and isolators complete all as specified and directed
S&F in repair sheet metal enclosure for DB SPN 8 way with 200 Amp rated bus bar 240 Volts, single door suitable for housing MCBs and isolators complete all as specified and directed
S&F in repair MCB SP 6-32 Amps, 240volts 10KA complete all as specified and directed.
S&F in repair MCB SPN 32/40 Amps, 240volts 10KA complete all as specified and directed.
S&F in replacement MCB TPN 40-100 Amps, 240 Votls 10 KA copmplete all as specified and directed.
Supply and fixing in repair LED lights fitting 1x 18/20W, 220V, AC decorative box type with driver, holder including LED tube light, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.
Supply and fixing in repair LED lights fitting mirror type with high out put diffuser 2 feet,1x 10W, 220V, AC decorative box type with driver, holder including LED tube light, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.
S&F in repair LED bulb 12 watts, 220V complete all as specified and directed.
M&L in replacement for 1100 Volts grade heavy duty cable PVC insulated aluminium conductor served with an inner sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hangers not more than 1 M apart including 4mm dia GI suspension wire one twin core flat or circular stranded/solid conductor of size 10 Sqmm complete all as specified and directed.
Dismantling house service brackets, any type from existing position
M&L for house service bracket (hook type complete with 3.0 mtr long GI Pipe 40mm dia med grade, two nos 90 degree bend, clamps, nuts and bolts, washers, MS hooks and stay or guy all as reqd at site and directed.
S&F in replacement of 1x35 watt LED building security light fitting, with and including GI bracket made out of 1.5 mtr GI pipe bent to shape light grade of 40mm dia, bracket mounting clamps nut bolts etc and making electric connection with 3 core 1.5 sqmm PVC insulated copper conductore cable complete all as specified and directed.
Material and Labour for replacement of earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, buried directly in ground (earth pit not less then 2.25 metres deep below ground level) with top edge of the plate not less then 1.5 metres below normal ground level, conneted to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, cheek nuts and washers of galvanised or iron protected by 15 mm bore GI pipe (medium grade) and connected to main switch board as directed including concrete pit in PCC (1:3:6) type C1 precast RCC (1:2:4) type B1 cover slab 40x40 Cm x 6Cm reinforced with 8 mm dia deformed bar @ 5 cm c/c with one handle for lifitting made out of 8 mm dia MS bar, funnle, wire mesh, 20 mm bore GI pipe (medium grade) for watering including charcoal and salt in alternative layers necessary excavation and earth work in any type of soil and testing complete all as shown on electrical plate No-3 of SSR part-I, 2009.
Supply only tape roll insulation (1.8cm x 6.5m x 0.125mm) suitable for 1.1KV grade best quality, good adhesive as sample held with AGE office all as directed.
Taking down ceiling fan from existing position, dismantling, overhauling and cleaning throughly, oiling /greasing and re- assemble after replacing split pins, check nuts, rubber seal etc and rehanging at same or new locations duly connected with new PVC three core flexible copper conductor cable of size 23/.0076, complete testing & specified all as directed. Note: Spare parts will be measured and paid separately under respective items as supply only as mentioned below.
M&L for taking out burnt copper winding from ceiling fan of 1200 mm size and rewinding with existing /same guage of super enammeled copper winding wire complete all as specified and directed.
Supply only Ball bearing for Ceiling fan after and including taking down old ball bearing complete all as reqd at site, specified and directed.
Supply only capacitor 2.5 mfd±5%, 440 Volt, AC, 50Hz after removing old defective condensor complete all as specified and directed.
M&L for painting with one coat of spray paint with white enamelled paint on external surface of ceiling fan of any size complete after duly prepared the surfaces by rubbing with wire mesh, washing with soap water including filling cavities with filler, one complete including writing of MES Number all as specified and directed.
Taking down exhaust fan of any size from existing position, dismantling, overhauling and cleaning throughly, oiling/greasing and re- assemble after replacing split pins, check nuts, rubber seal bushes etc and rehanging duly connected with new PVC three core flexible copper conductor cable of size 23/.0076, complete testing & specified all as directed. Note: Spare parts will be measured and paid separately under respective items as supply only as mentioned below.
M&L for taking out burnt copper winding from exhaust fan of any size/type and rewinding with existing /same guage of super enammeled copper wire complete all as specified and directed.
S&F capacitor 4 mfd±5%, 440 Volt, AC, 50Hz or suitable one after removing old defective condensor complete in exhaust fan all as specified and directed.
M&L for painting with one coat of spray paint with grey/blue enamelled paint on external surface of exhaust fan of any size complete after duly prepared the surfaces by rubbing with wire mesh, washing with soap water complete including writing of MES Number all as specified and directed.
Taking down carefully storage water heater of capacity 25/35/50 ltr, dismantling inner tank and outer tank, pipe assembly, cleaning thoroughly with descaling liquid compound complete to ensure free and constant flow of water through outlet, welding of inner tank if required at site, rethreading of inlet/outlet pipe 15 mm dia, reassembling the same at existing /new location including necessary fasteners to ensure proper safety as reqd at site, testing and commissioning after re-installation at site complete all as specified and directed. Note: Spare parts will be measured and paid separately under respective items as supply only as mentioned below.
Supply only thermostate fitting fitment varying capacity for 25/35/50ltrs capacity geysers.
Supply only PVC connection pipe nylon threaded 15mm size with brass nuts copping in both end of length 600mm for geysers complete all as specified and directed.
Supply only heating element of 1.5/2.0 KW for geyser (as per sample ISI brand) including taking down old heating element complete all as specified and directed.
M&L in repair sub main wiring with 2 run of 4 sqmm and one run of 4 sqmm Copper cable FRLS multistranded drawn in and including PVC conduit in surface/recessed providing necessary clamps, screws, thimbles and connected to MCB of solar water heater/DB box etc all as reqd at site, specified and directed.
M/S ANAND SINGH DHAMI
SK Traders Sons
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .