COMPREHENSIVE MAINT INCLUDING INTERNAL PERIODICAL SERVICES, DAY TO DAY MAINTENANCE WORKS OF B/R AND E/M NATURE AND MISC ITEMS SUCH AS SEWAGE DISPOSAL/ FENCING ETC FOR SMA AREA AT NB(K)

Amount

Attending complaints such as leakage and other petty repairs including providing and replacing minor items and ensuring proper and trouble free functioning of Pillar taps,sink cock etc of any description or size, complete all as specified and directed by Engineer-in-Charge. Note:- (a) Rectificatin of leakage by replacing tap washers, tightning the handle/knob/nuts/screws, tightning loosely fitted tap, replacement of thread seal tape/cotton thread, removing any blockage from tap or PVC connection pipe, tightning PVC connection pipe etc will be treated as minor / petty repairs. (b) Tap washers, washers for PVC connection pipe, nut/screw, thread seal tape/cotton thread, shellac, solvent cement etc shall be treated as miror items which shall be provided by the contractor as required with out extra cost. Quoted rate shall be deemed to be inclusive of same.

Attending complaints such as non functioning of flushing cistern, leakage and other petty repairs including providing and replacing minor items and ensuring proper and trouble free functioning of low/high level flushing cistern complete all as specified and directed by Engineer-in-Charge. Note : (a) Rectificatin of leakage by correcting siphon washers,replacing washers of PVC connection, tightning the handle/knob/nuts/screws, tightning loosely fitted float or ball, removing, cleaning and refixing of siphon, replacement of thread seal tape/cotton thread, removing any blockage from inlet/out let mouth or from PVC connection pipe, tightning PVC connection pipe, fixing of flush pipe and cone, handle, brackets etc will be treated as minor / petty repairs. (b) Washers for PVC connection pipe, nut/screw, thread seal tape/cotton thread, shellac, solvent cement, M seal etc shall be treated as miror items which shall be provided by the contractor as required with out extra cost. Quoted rate shall be deemed to be inclusive of same.

Attending complaints and carrying out Petty/minor repairs to joinery and builders hardwares, such as easing/adjusting of shutters of any type or size, re-fixing of wire mesh, cub board shutters/shelves, easing/adjusting/refixing of hinges, tower bolts, handles, stoppers, sliding bolts / locks, magic eye, hook and eyes, hasp and staples, etc, of any type and size, and ensuring proper and trouble free functioning, including providing and replacing minor items complete all as specified and directed by Engineer-in-Charge. Note:- (a) Easing/adjusting of shutters and builders hardwares, tightning the handle/knob/nuts/screws, oiling/greasing of builders hardwares etc will be treated as minor / petty repairs. (b) Screws, nails, adhesives etc shall be treated as miror items which shall be provided by the contractor as required with out extra cost. Quoted rate shall be deemed to be inclusive of same.

M&L repairs to plaster in wall/floor and ceiling using CM 1:4 incl preparing the patch surface by cutting out to nearest regular shape, removing loose particles, and cleaning the surface, applying neat cement slurry as required,including finishing the patch even and smooth without using extra cement and to match with existing surface , patches area n exc 0.50 Sqm each patch and removal of rubbish off the premises complete all as specified and as directed. Note:- (a) Necessary scafolding, Curing for specified period and leaving the site neat and clean shall be deemed to be included in quoted rate

M&L repairs to cement concrete floor, plinth etc and like using PCC 1:2:4 Type B0 and and finishing the surface to match existing incl preparing the patch surface by cutting out to nearest regular shape, removing loose particles, and cleaning the surface, applying neat cement slurry as required, making good, finishing, work in patches area n exc 0.50 Sqm each patch, depth up to 75mm, and removal of rubbish off the premises complete all as specified and as directed.

M&L petty repairs to ceramic tiles in wall and floor, by providing and fixing tiles as per the matching existing floor finish, including 15mm thk screed bed CM 1:4 incl neat cement slurry as required, in patches area n exc 1.00 Sqm each patch incl preparing surface by cutting out damaged tiles and screed, removing looose particles, cleaning the surface, and removal of rubbish off the premises complete all as specified and as directed.

M&L cutting out floor and removing damaged floor/nahani trap, providing and fixing new floor trap/Nahani trap including making good floor to match existing flooring incliding joining trap to pipe line, sealing any voids, with CM 1:3 including water proofing compound,cement concrete 1:2:4,cleaning the pipes etc complete all as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed by Engr-in-Charge.

M & L for Glazed ceramic tiles in vertical surface (300x 200x 6-7 mm or 600x300x 6-7mm) thick Such as skirting or dados laid over cement mortar backing coat set and jointed with neat cement slurry and pointed in white or coloured cement to match incl backing coat in CM 1:4, 10mm thick for fixing tiles as in skirting/dado all as specified and directed.(Make-Johnson/Somany/Kajaria)

M&L Non skid jointless rectified ceramic tile of size 400x400x8mm thick in floor over cement screed 15 mm thick in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Non skid jointless rectified ceramic tile of size 400x400x8mm thick as in skirting over and including cement backing coat 10mm thick in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Non-Skid Ceramic tiles of size 600X600 X8-9mm thickness in floors with approved Pattern over and including cement screed 15 mm thick in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Non-Skid Ceramic tiles of size 600X600 X8-9mm thickness as in skirting over and including cement backing coat 10mm thick in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L in repairs chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick set in neat cement slurry with grey cement and pigments laid over and including 20 mm thick screed bed in CM 1;6 and including taking down old tiles (make-Eurocon/sirex/Johnson)

Demolition of stone slabs/tiles of any description or thickness laid and bedded in any motar complete all as specified and directed.

M & L for 20mm thick granite stone slab( Jet black ) over and including cement screed 15mm thick in CM 1:4 over RCC Slab complete all as specified and directed .

M & L for Machine cut kota stone slab flooring 20-25mm thick over and cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L PCC 1:4:8 type D2 100 mm thick using 40 mm graded aggregates as in sub base of floor complete all as specified and directed.

M&L PCC 1:2:4 type B0 40 mm thick using 12.5 mm graded stone agg surface complete all as specified and directed.

Demolition of brick work/ stone /boulders masonry built in cement mortar including all quoins, arches , pillars etc complete all as specified and directed

M&L pre cast cement concrete block masonry 1;3;6 Type C1 with solid blocks exec 10 cm in width and setting in CM 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water any description, etc. complete all as specified and directed.

M&L for rendering 10mm thick on brick work or concrete wall surfaces in 1:6 cement mortar, finished even & smooth without using extra cement all as specified and directed

M&L for rendering 15mm thick on brick work or concrete wall surfaces in 1:4 cement mortar finished even & fair all as specified and directed

M&L for rendering 5mm thick on ceiling surfaces in 1:3 cement mortar finished even &smooth without using extra cement all as specified and directed

M&L for preparation of newly plastered wall surfaces and application of one coat of primer ,and two coats of oil bound distemper complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and application of two coats of cement based paint over a coat of primer all as specified and directed

M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F framed work such as grills, gratings, etc with ends of bars shouldered & or riveted, or forged into spikes, framed guard bars etc & similar work conforming to Fe.290 Gde E-165 complete all as specified and directed.

M&L MS Framed work confirming to Fe 410 -W (Gde- E- 250) quality- A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete all as specified and directed.

S&F mild steel work in framing, purlins etc using sections such as angle, hollow pipes , flats etc using Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed.

M&L for preparation of new Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of anti corrosive paint over a coat of Epoxy primer, on steel surfaces complete.

S&F 32 mm dia PVC waste pipe with cup head for Wash Hand Basin as in repair complete all as specified and directed..

S&F in repairs stainless steel sink with draining board made out of 1.0mm thick sheet for kitchen with plug , washers waste pipe , cast iron cantilever brackets connecting union over all size 915X460mm with bowl size 410X330X160mm all as specified .

S&F in repairs stainless steel plate rack of size 36inchX31InchX10 Inch made out of 0.63mm thick stainless steel sheet (Grade AISI 304 18/8) SS screw and round pipe fixed to wall with screws complete all as specified and as directed. [Make- Blue star sliver shine cat No KPR-315 or Equivalent from Nirali/Jain Brothers Sanitation Pvt Ltd (Jayna) as approved by GE

S & F in repair Pillar tap 15mm bore fancy type, cast copper alloy with capstan heads chromium plated screwed down and fixed .

S&F in repairs CP tubular towal rail 20mm dia , 600mm long all as specified.(Brass chromium plated), Make-KAG Aqua or equivalent makes mentioned in list of manufactures

S&F in repair for CP towel ring round with flang complete all as specified and directed. cat part No. ACN-CHR-1121BN of Jaquar or equivalent makes mentioned in list of manufactures

S&F in repair 150x150mm SS grating doom with or without hole for waste pipe complete all as specified and directed.

S&F peg set of 6 pin, hooks & rail of stainless steel and fixed with screws complete all as specified and directed.

S & F in repairs Soap dish fixed with screws Cat No. CAN-CHR-1131N of Jaquar equivalent makes mentioned in list of manufactures

S & F in repair two legged aluminium floor door stopper with rubber shoe 140mm long complerte all as specified and directed .

S&F in repair MS helical door spring 300mm long including roller and roller plate complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long incl aluminium alloy bracket and guard rail complete all as specified and directed.

S&F in repair corner shelf with 5.5 mm thick sheet glass and SS railing of approved quality fixed with brass screw complete all as specified and directed .Cat No. CAN-CHR-1173 of Jaquar or equivalent makes mentioned in list of manufactures

S&F in repair for 25mm curtain rod powder coated anodized aluminium alloy fancy brackets and knobs complete all as specified and directed.

S & F in repair Vitreous china wash down water closet pan (EWC), any color, pedestal pattern fixed complete all as specified and directed by Engr-in-charge.

S&F in repair Waste fittings, brass, chromium plated 40mm dia for sinks, with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed waste coupling for sink (make: ZIM/GMG/PARKO)

S&F in repairs white glazed vitreous china WHB flat back size 550x400 mm including CI bracket incl PVC waste pipe 40mm bore 90cm long with cup, spring type and 32mm brass chromium plated waste fitting, complete all as specified .

S & F in repairs Plastic seat and cover, any color closed pattern with flat bottom & cover and mild steel chromium plated or aluminium hinges, etc including fixing bolts complete.

S&F in repair vitreous china squatting pan ‘Orissa pattern’ size 580x440mm white with integral foot rest including connection to trap, and flushing pipe, anti-syphonage pipe, etc and including cement concrete bedding complete all as specified and directed.

S & F in repair PVC valveless, syphonic action type, flushing cistern, low level, 10 ltr capacity any color, with inlet ball valve, float and handle including brackets and all connections, ISI marked complete all as specified and directed.

S & F in repairs PVC connection 15mm bore 45cm long with complete all as specified and directed.

S/F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. . Note:-Note applicable for item Nos 37 to 58 These item shall be aproved by GE. These item shall be purchased and kept in his own store by the contractor and need fix immediately on receipt of complaint slips.

Taking down chowkats n.exc 1.5Sqm but with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frames) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.

Taking down shutters of any description n.exc 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified and directed.

M/L 2nd class Hw Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

M/L 2nd class HW 35mm thick Plain framed, panelled factory made shutters (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

M/L 2nd class HW 35mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (B); supplied and fitted to chowkats complete all as specified and directed.

S&F 2nd class hard wood, 25mm thick factory made cupboard (door) shutters plain framed, panelled shutter with lock rail and panel of 12mm thick veneered water proof particle board the size of rails and stile as per IS -1003 klin seasoned and chemically pressure traeted complete all as specified and as directed.

M/L preparation of new wooden Surfaces of any description, not otherwise described, over 10cm width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 4mm thick Sheet glass one side frosted, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed by Engineer-in-Charge.

S&F 4mm thick plain Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed .

S&F 4mm thick plain Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and as directed .

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S/F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick with particle board core (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing .

M&L for adjusting, easing and minor repairs to aluminium windows of any size, pattern and with two/three shutters & and ensuring proper functioning of the windows including changing of pivot,repairs to lock,handle,rubber beadings etc complete all as specified and directed.

M/L PCC 1:2:4 type B-1,using 20mm graded stone aggregate for fixing hold fast including necessary form work complete all as specified and directed.

S/F MS hold fast made out of FI 40x6mm complete all as specified and directed.

S/F 100mm stainless steel butt hinges, medium wt complete all as specified and as directed.

S/F 75mm stainless steel butt hinges, medium wt complete all as specified and as directed. )

S/F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S/F 100mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S/F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S/F 125mm long Aluminium handles, cast type, anodised complete all as specified and directed.

S/F in repair 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S/F in repair 100mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S/F in repair 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S/F in repairs 125mm long Aluminium handles, cast type, anodised complete all as specified and directed.

S & F in repair 100 mm stainless steel window hook & eye fixed in wooden/steel window complete all as specified and directed.

Dismantling Single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed.

Dismantling Battens for tiles, shingles etc, of any size including tilting fillets spaced n.exc 15 cm complete all as specified and directed.

Dismantling fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section,unframed work complete all as specified and directed.

M/L Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed.

Fixing only Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed.

M/L Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and directed.

M/L 2nd class HW Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads exc 13 sqcm & n exc 25 sqcm complete all as specified and directed.

M/L 2nd class HW Clean sawn battens at 15 cm centres,exc 5 & n.exc 15 sqcm complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

M/L 2nd class HW Weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and directed.

M/L Prepairing the surfaces of battens, any size and spacing, prepared and treated all over (measured overall on one side only, spaces not deducted) with 2 coats of creosote oil complete all as specified and directed.

M/L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with 2 coats of creosote oil complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any guage, thickness incl Nainital or similar pattern roof covering complete all as specified and directed.

S & F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap, fixed with L-hook or cranked bolts complete all as specified and directed.

S&F for pre-painted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and directed.

S&F for pre-painted galvalume zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

M & L for continuous welding in repairs exc 2.5cm but n exc 5 cm in length Thickness of Metal to be welded not exc 6mm complerte all as specified and directed .

Demolition of reinforced cement concrete in any description and in any position not otherwise specifically provided for (reinforcement cut to facilitate demolition) all as specified and as directed .

M&L RCC (1:2:4) type B-1 (Using 20mm graded crushed stone aggregate) as in slabs, shelves supported on walls, beams and columns in floor or roof including balconies, canopies, deck slabs or in Chajja/facia projection and the like complete all as specified and directed .

M&L mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed .

M&L for use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for rough finished flat surfaces (Horizontal or sloping) complete all as specified and directed .

Supply only liquid water proofing compound complete all as specified and directed .

M&L for preparation of old plastered surfaces of walls including rubbing down surfaces including filling of nail holes/disturbed surfaces by cementitious wall care putty and applying one coat of whitewash complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling including rubbing down surfaces on ceiling including filling of nail holes/disturbed surfaces by cementitious wall care putty and applying one coat of whitewash complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls including rubbing down surfaces including filling of nail holes/disturbed surfaces by cementitious wall care putty and applying one coat of oil bound distemper (washable) all as specified and as directed.

M&L for preparation of old plastered surfaces of ceiling including rubbing down surfaces including filling of nail holes/disturbed surfaces by cementitious wall care putty and applying one coat of oil bound distemper (washable) all as specified and as directed.

M&L preparing old treated surface of wood or wood based material of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified

M&L preparing old treated steel surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified

M&L preparing old treated surface of steel of any description n.exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified. Note:- Item No 111 to 117 of periodical services will be execute bldg No P-37 to P-47, Bldg No P-55 to P-63, Bldg No P-70 to P-81 Bldg No P-164 to P-170, Bldg A to Bldg E, Bldg N, Bldg M1, M2 & M3 Bldg No P313 to Bldg No 316, Bldg No P- 278 to P-281Bldg No P-177 to P-184 Bldg NB1 to Bldg NB-4

Writing letters or figures (Block. Roman, Italic or Indian) 40 cm high complete all as specified and directed.

Writing letters or figures (Block. Roman, Italic or Indian) 10 cm high complete all as specified and directed.

Index hands (natural size) or arrows (upto 40cm long) complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and application of two coats of cement based paint over a coat of primer all as specified and directed

M&L for preparation of newly plastered ceiling surfaces and application of three coats of white wash all as specified and directed

Demolition of existing roof treatment including old tarfelt in any thickness from roof surface incl cleaning of surface by water removing dust by pressure pump etc and remove all debris from roof surface at any height and disposing off out side MoD land

M/L screed bed or bedding layer of mortar 15mm in CM 1:4 (using WPC) for laying roof treatment complete all as specified and directed.

M&L for water proofing treatment over roof surface with cement mortar 1:4 admixed with NitoBond SBr or equivalnt @ 1 litre per 50 Kg bag of cement. Annular space of down take water pipe shall be packed and sealed using Conbextra GP2 or equivalent mixed water and filling as per manufacturers specifications. water ponding for minimum for 48 hours and injection grouting of construction joints, leaking spot and honey combs with cementious pressure grouting with 40psi pump using Cebex 100 or equivalent @225 gms mixed to 50 Kg bag of cement incl joints packing using polymer modified mortar. Providing and applying water proof coating using fosroc Nitoproof 600 or equivalent, over dry surfaces to achieve 1.5mm thick with 02 coats with interval period of 6 hours over a sustrate using spray/ squngee/roller/brush. Water proofing coating shall have the elongation of 500-700% (ASTM D412-90), tear resistance of 21Kn/m (ATMD624-00) and tensile strength of >1.9 N/mm2. Termination to be done on wall extending the coating to min 300mm height above the finished floor level as per vendor recommendation. Laying 200gsm non-woven geo textile membrane over Nitoproof 600 coating with overlap sealed before providing screed concrete of thickness 50mm 1:2:4 mix type B1 with approved water proofing compound to maintain drainage of water easily Complete all as specified and directed by Engr-in-charge. (Water proofing compound measured at paid septrately) Make:- FOSROC or equivalent.

M&L for Micro concreting in RCC coloumns, beamsor soffit of slab including chemicals, reinforcement, form work average thickness not exceeding 50MM as per the following stages:- (I) Remove the damaged concrete portions completely till the reiforcement is exposed from the member carefully with mechanical arrangements and hand chiseling and clean the dust particles. (If the dia of existing reinforcement has reduced by more than 1/3 of the original dia, additional reinforcement has to be provided and fixed in position as directed by Engineer In Charge. Additional reinforcement will be measured and paid separately ) (ii) Clean the reinforcement and apply Nitrozinc primer manufactured by M/S Fosroc chemicals or equivalent (iii) Applying the bonding agent by using NITO BOND EP or equivalent (iv) Providing leakproof shuttering system for the jacket portion of the members and applying micro concrete with Rendroc RG manufactured by M/S Fosroc chemicals or equivalent( compressive strength of Micro concrete should be 50 N/mm2)

M&L for water proofing for sunken slabs including all materials as per the stages described below, complete all as specified and as directed. (a)Remove all dust, oil, dirt, laitance and other containments, loose particles from concrete surface . (b) Chamfering the floor wall junctions with cement mortar 1:4 admixed with NitoBond SBr or equivalnt @ 1 litre per 50 Kg bag of cement. (c) Annular space of out let/spout pipes shall be packed and sealed using Conbextra GP2 or equivalent mixed water and filling as per manufacturers specifications. (d) Carrying out ponding for minimum of 48 hours (e) Injection grouting of all leaking spot and honey combs with cementious pressure grouting with 40psi pump using Cebex 100 or equivalent @225 gms mixed to 50 Kg bag of cement incl joints packing using polymer modified mortar. (f) Providing and applying water proof coating using fosroc Nitoproof 600 or equivalent, over dry surfaces to achieve 1.5mm thick with 02 coats with interval period of 6 hours over the surface using spray/ squngee/ roller/ brush. Water proofing coating shall have the elongation of 500-700% (ASTM D412-90), tear resistance of 21Kn/m (ATMD624-00) and tensile strength of >1.9 N/mm2. Termination to be done on wall extending the coating to min 300mm height above the finished floor level as per vendor recommendation. Laying 200gsm non-woven geo textile membrane over Nitoproof 600 coating with overlap sealed. Make:- FOSROC or equivalent as approved.

M&L 50mm thick PCC (1:2:4) type B1 (Using 20mm graded stone aggregate) for sub base of sunken portion complete all as specified and directed.

M&L for PCC type E2 1:5:10(40mm aggregate) in sunken floor of toilet/bathroom finished fair and even complete all as specified and directed.

Providing Plain, Aluminium sheeting of 0.56 thk sheet, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing cut torequired width and length and fixed over crumble section in any position and height , sheet fixed using screws and plugs to wall/column/ceiling etc complete all as specified and as directed.

Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed in repair complete all as specified and directed.

S & F 75mm Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S & F 100mm Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

Opening the man holes of septic tanks, removing night soil, other sediments, solid waste, and liquid waste in any condition by pumping or any other mechanical means, using sewage truck cleaning internal surfaces of the tank with clean water and refix the man hole cover on completion of work, complete all as specified and as directed by Engineer In Charge. Notes:- (a) The night soil, other sediments, solid waste, and liquid waste in any condition removed from septic tank shall be taken away from respective vicinities and NB(K) Premises on closed containers/conveyance and disposed off out side defence land (b) Disposal of the same shall be the responsibility of the contractor with out any extra expenditure to government. Disposal of waste shall be made in accordance with the regulations of authorities concerned. (c) The unit rate quoted shall be deemed to be inclusive of cleaning the nearest MH & sewage line from that MH to septic tank.

All as per item No 135 above but for manholes of plan area n exc 1 Sqm and depth upto 0.50m complete all as specified and directed.

All as per item No 135 above but for manholes of plan area n exc 1 Sqm and depth from 0.50 to 1.00 m complete all as specified and directed.

All as per item No 135 above but for manholes of plan area n exc 1 Sqm and depth more than 1.00m complete all as specified and directed.

Cleaning of sewage line/effluent drains 100mm dia below/above GL to remove blockage and ensuring free flow complete all as specified and directed.

Cleaning of sewage line/effluent drains 150mm dia below/above GL to remove blockage and ensuring free flow complete all as specified and directed.

Cleaning of culvert and covered drains of any size incl removal of RCC cover slab and refixing in same position after cleaning incl setting and joining the cover slab in cement mortar 1:6 and removing the silt and dirt to a distance exc 200 and n,exc 250 m from starting point and disposed off (span of culvert upto 1m) complete all as specified and directed.

Removing the chokes of WC/bathroom/kitchen traps/drains up to Ist manholes including cleaning of gully traps in single storied/ground floor of multistoried bldgs complete all as specified and directed.

Removing the chokes of WC/bathroom/kitchen traps/drains up to Ist manholes including cleaning of gully traps in multistorey buildings except grounf floor complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation, man holes etc and getting out in soft/loose soil complete all as specified and directed. .

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, 100mm pipe complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, 150mm pipe complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, 300mm pipe complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, etc as required, dia of pipe 110mm complete all as specified and directed.

M&L for Reinforced concrete pipes class NP 2 of 150 mm dia laid and jointed complete with collars complete all as specified and directed.

M&L for Reinforced concrete pipes class NP 2 of 300 mm dia laid and jointed complete with collars complete all as specified and directed.

M&L cement concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC 1:3:6 type C2 with 40mm graded aggregate, dia of pipe 100mm complete all as specified and directed.

M&L cement concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC 1:3:6 type C2 with 40mm graded aggregate, dia of pipe 150mm complete all as specified and directed.

M&L cement concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC 1:3:6 type C2 with 40mm graded aggregate, dia of pipe 300mm complete all as specified and directed.

M&L for cutting into existing manholes for connecting new drains,making good to pipe and rendering cutting out existing benching for and forming branch channel(1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished,and reforming benching as required of 150 mm bore complete all as specified and directed.

Returning filling in including spreading, leveling, watering and well ramming in layers n exc 25cm thick (Soft/loose soil) complete all as specified and directed.

Removing excavated material exc. 250m but n.exc 500mand depositing where directed

M&L Providing precast cement concrete in cover slabs for man holes etc and similar articles with plain faces, Type B1 1:2:4 (20mm graded aggregate) set in cement mortar 1:6 complete all as specified and directed.

M&L Mild steel TMT bars 6mm to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not lessthan 0.9mm dia or securing with clips complete all as specified and directed.

Destruction and removal of growth of weed plants with roots from roof , walls or any other part of bldg, at any position and height, by completely removing the growth and applying 2.40 'D' oil mixed with Veedol chemical solution and sprayed on and around location of growth and at places of possible growth of weeds and making good damaged surfaces in cement mortar 1:4 of PCC 1:1 1/2:3 as required and directed

M&L for hume pipe septic tank 50 users capacity incl AC vent pipe, earth work excavation in soft/loose soil, erecting hume pipe septic tank in position, PCC 1:3:6 and all other accessories required such as vent cowl etc and making good the disturbed surface and removing surplus soil and old u/s septic tank, complete incl connecting to the sewer line etc complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out portion embedded in natural ground and making good disturbed ground complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

M&L plain cement concrete type D2, mix 1:4:8 with 40mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L MS work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) MS round bars including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Dismantling chain link fencing, wire mesh etc any type /size complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type, weighing not less than 3 Kg per Sqm complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, in repair complete all as specified and directed.

Mild steel screw bolts(machine made) with hexagonal or square heads at oneend and screwed the other, orscrewed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length exc 5cm n exc 10cm, diameter of neck 11 to 15mm complete all as specified and directed.

M&L preparing new steel surface of any description exc 10cm width or girth and applying two coats of synthetic enamel over a coat of redoxide primer complete all as specified and directed.

M&L preparing old steel surface of any description exc 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L PCC1:3:6 type C2 using 40mm aggregate 75mm thick in plinth protection, surface to be finished even and fair complete all as specified and directed.

M&L for 100mm hardcore of gauge n exc. 63mm with broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.

M&L for 100 mm thick PCC 1:4:8, Type D-2 using 40 mm graded stone aggregate complete all as specified and directed.

M&L for forming contraction(dummy) joints 65mm deepx10mm wide filled with sealing compound Grade A complete all as specified and directed.

M&L for Coarse aggregate of grading 12.5mm to 4.75mm as in cushion for paver block spread and levelled in layers n exc. 25 cm thick well rammed including watering as required complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block M-35 grade any shape and size confirming to SI 15658-2006 of 60mm thickness, with grey cement and pigment complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block M-40 gradeany shape and size confirming to SI 15658-2006 of 80 mm thickness, with grey cement and pigment complete all as specified and directed.

M&L for providing cement concrete Type B0, 1:2:4 (using 12.5mm graded aggregate) as in kerb including weathering, slightly rounded or chamfered angles and throating, incl necessary form work complete all as specified and directed.

M&L Pre-cast cement concrete block masonry in PCC 1;3;6 type C1 with solid block, exc. 10 cm in width and setting in cement mortar,1:6 complete all as specified and as directed

M&L PCC 1:2:4 type B1 with 20mm graded aggregate as in coping, incl necessary form work complete all as specified and as directed.

M&L rendering 15mm thick in cement mortar 1:4 on fair face of brick work, surface finished even and smooth with out using extra cement using water proofing compound (WPC shall be measured and paid seperately)

M&L for Cement concrete of type C2 1:3:6(40mm graded aggregate) in surface channels and drains complete all as specified and directed.

Taking down rainwater pipe,eaves gutter and AC vent pipe of any size including AC gutters,etc incl all fittings complete all as specified and directed.

M/L for PVC eaves gutter heavy duty half round 200mm dia complete all as specified and directed.

M/L for PVC (SWR) junctions to fit 200mm bore eaves gutter,top portion half round and bottom portion to fit 110mm bore PVC pipes etc complete all as specified and directed.

S&F in repairs PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of height up to 15 m, 75mm bore pipe complete all as specified and directed.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of height up to 15 m, 110mm bore pipe complete all as specified and directed.

S&F in repairs PVC (SWR) bends any radius with access door, 110mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) bends any radius with access door, 75mm bore complete all as specified and directed.

S&F in repair PVC (SWR) vent cowl slotted, 110mm complete all as specified and directed.

S&F in repair PVC (SWR) vent cowl slotted, 75mm complete all as specified and directed.

S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L provide 40 mm dia PVC pipe in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F in repairs PVC (SWR) bends any radius 75mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) bends any radius 110mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) branch piece (single Y)equal or unequal, 110mm bore complete all as specified and directed.

S&F in repairs PVC (SWR)branch piece (single Y)equal or unequal, 75mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) junction single, (Single T) equal or unequal 75 mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) junction single, (Single T) equal or unequal 110 mm bore complete all as specified and directed.

S&F in repairs White vitreous china laboratory sink size 450x300x150 laboratory with plugs, washers and wastes; including beding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each complete all as specified..

S&F in repairs Chinaware partition for urinal of size 310x700mm all as specified.

S&F in repairs Push tap high pressure suitable for urinals.

S&F in repairs CP urinal spreader for 15 mm bore fixed with urinal including CP pipe.

S&F aluminum powder coated door shutter with frames of size - 40x45x1.8 mm incl. screwing of frame glass necessary joints cleats, glazing clips rubber packing, snap beading, suitable handle, tower bolt, SS butt hinges,mortice lock 4 lever with 65 mm latch size including aluminium anodized door frame of size 60x 40 x1.8 mm thick fixed to wall with necessary screws and plug complete all as specified & directed. (rates for one no hydraulic door closer per shutter & 5 mm thick tinted glass /4mm thick ACP sheet reqd to be fitted in shutters is included in the item )

S&F in repairs, 16-18mm MDF DWR Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including beading /matching laminates to exposed edges of board complete all as specified and directed.

S&F Aluminum powder coated fixed type windows including suitable nylon beading channel gasket etc complete with following specification :- Frame :- 60mmx40mmx1.80mm Panel :- 4mm thick ACP sheet / 5mm thick tinted/frosted glass of approved colour and design

M&L in repair for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including frame work. cover fillets etc complete all as specified.

Supply, Providing and fixing suspended false ceiling consisting of 12mm thick Gypsum seamless board suspended on GI frame work with staggered joints, GI frame work to consist GI perimeter channel 25mm x20mm of 22 gauge along perimeter of false ceiling. Channel section of 50x25mm of 22 gauge and at 300mm C/C throughout one way fixed with Serew/nut bolt and other direction 40 x 15mm x 22 gauge channel provided for interlocking with GI cleat and expansion fasteners including hangers 6mm dia G.I. fixed to roof truss, Boards are to be joined and finished so as to have a flush look which includes finishing the tapered and square edges of the gypsum board with joining compound paper tape and two coat plastering emulsion paint over one coats of primer & one layer putty 1.5mm thick suitable for gypsum board (As per the recommendation s/ practice) including necessary scaf folding and shuttering complete as directed as specified and directed by Engr-in-Charge.

M&L 4mm thick Non asbesto fiber cement building board fixed or laid /inserted to timber/GI/Aluminium Frame work with screw in ceiling incl anodised aluminium snap grid of size 605x605mm and GI hanger 6mm dia upto 1200mm length complete all as specified and directed.

Repair to rolling shutter without taking off any size and including greasing, oiling to all connected accessories and functioning trouble free complete all as specified and directed.

Repair to rolling shutter with taking off any size and including greasing, oiling to all connected accessories and make functional to operate gear box and all other accessories trouble free complete all as specified and directed.

S&F Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete but gear operated type with bevel gear box and crank handle complete all as specified and directed.

M&L in repair Toilet paper holder with flat recessed type stainless steel of brass, chromium plated or stainless steel fixed to walls with chromium plated (CP) brass screws

M&L in repair flush mount air roof ventilators exhaust fan complete all as specified and directed.

S&F in repair Aluminium extruded section Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repair precast cement concrete type B0 1:2:4 louvres and jallies, 45mm thick (mea sured solid), including all molding complete all as specified and directed

M&L Antitermite post construction treatment along the external wall below concrete or masonry using chemical emulsion @2.25/linear meter including pluging holes etc

M&L Antitermite post construction treatment under existing floors using emulsion one litre /hole300mm apart including drilling along external wall below including pluging holes 12 mm dia holes with CM1:2 to match the existing floors

M&L Antitermite post construction treatment of voids in masonry using chemical emulsion one litre/ hole at 300mm interval including drilling hole at 45 degree and replugging them with motar 1:2 to match existing .

M&L Antitermite post construction treatment at all points of contact of wood work by chemical emulsion @0.5litre/ hole by drilling 6mm dia holes at a down ward angle of 45 degree at 150mm center to center and sealing the same.

M&L preparing old treated surface of wood or wood based material of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified

S & F 200 mm dia of half round or 180 mm width rectangular PVC SWR ready made eaves gutter of pressure rating 6 Kg/cm2 of approved make including necessary fitting like bend WC/MS Clips etc complete all as specified.

S & F 150MM dia of PVC (SWR) pipe single socketed in any length with rubber joints including necessary fitting like bend WC/MS clips etc fixed on walls complete all as specified

S&F wooden flooring in long plank thickness not less than 12 mm and 2 way bevel complete all as specifies

Taking down Copper/ aluminium point wiring (light, fan, socket, bell, power point) complete fitting such as switches, ceiling roses, pendants, regulators, sockets, light fitting any type, building security light removing materials to store for keeping in safe custdoy for taking credit to match with existing suface all as specified and directed.

M&L Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits) with 1.5 sqmm nominal cross sectional area, copper conductor unsheathed FRLSH cable 1100 Volts grade including PVC casing and caping and connected accessories ISI marked with concealed sunken boxes with modular cover plate, PVC boxes, hylem sheet, including 1.5 Sqmm nominal cross sectional area PVC insulated copper conductor unsheathed FRLSH cable single core multistranded cable as earth continuity wire for one light controlled by one switch complete all as specified and as directed .

All as per item No. 231 here-in-before but for one fan point controlled by one push button on independent board complete all as specified and directed.

All as per item No. 231 here-in-before but for one bell point controlled by one push button on independent board complete all as specified and directed.

All as per item No. 231 here-in-before but for 5 pin 5 Amps socket outlet point on independent board complete all as specified and directed.

All as per item No. 231 here-in-before but for 5 pin 5 Amps socket outlet point on same board complete all as specified and directed.

All as per item No 231 here-in-before but using 2.5 sqmm copper conductor cable (multistranded) PVC insulated FRLSH and unsheathed cableand 2.5 sqmm copper conductor cable (multistranded) PVC insulated FRLSH and unsheathed cable earthwire with terminal box of suitable size of modular switch & socket for one 6 pin 15 Amp socket outlet point on independent board complete all as specified and directed.

Material and labour for point wiring for one light with 1.5 sqmm PVC insulated (FRLSH) unsheathed copper conductor multistranded 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FRLSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity conductor including connected to common earth dolly drawn through and including rigid PVC Conduit medium grade ISI marked Concealed of suitable size with all accessories and sunken box of 1.6 mm thick and 60 mm Depth pressed steel box factory made for mounting of switch, socket and fan regulator with modular frames covers including chase cutting and making good to the disturbed surface and matching to the existing finishes specifications complete all as specified and as directed .

All as per item No. 238here-in-before but for one fan point controlled by one push button on independent board complete all as specified and directed.

All as per item No. 238 here in before but for one bell point controlled by one 5 Amp bell push on independent board complete all as specified and directed.

All as per item No. 238 here in before but for one 5 pin 5 Amp socket outlet point on independent board complete all as specified and directed.

All as per item No. 238 here in before but for one 5 pin 5 Amp socket outlet point on the same board complete all as specified and directed.

All as per item No. 238 here in before but using with 2.5 Sqmm copper conductor cables multistranded (FRLSH) PVC insulated, unsheated cable and including 2.5 Sqmm copper conductor cable multistranded (FRLSH) PVC insulated and unsheated cable as earth continity wire and connecting to common earth dolly for one 6 pin 15 Amp socket outlet point on independent board complete all as specified and directed.

S&F Modular Bell Push 6A, 1 module, complete all as specified and as directed.

S&F electric bell, AC 230 Volt single pole complete all as specified and as directed.

S&F switch piano flush type single pole one way 5 Amp one way complete all as specified and as directed.

S&F switch piano flush type single pole one way 15 Amp complete all as specified and as directed.

S&F switch socket combination 5 Amps, 5 pin 2 in 1 , complete all as specified and as directed.

S&F in socket outlet multipurpose 5 and 15 Amps, 5 pin, 2 in 1 complete all as specified and directed.

S&F fan regulator electronic step type 100 W, 250 Volts complete all as specified and as directed.

S&F ceiling rose surface bakelite 65 x 50 mm, 3 terminals complete all as specified and as directed.

S&F in replacement, bell push flush type 5 Amps single pole complete all as specified and as directed.

S&F in replacement, electric bell, AC 230 Volt single pole complete all as specified and as directed.

S&F in replacement, switch piano flush type single pole one way 5 Amp one way complete all as specified and as directed.

S&F in replacement, switch piano flush type single pole one way 15 Amp complete all as specified and as directed.

S&Fin replacement, socket outlet 5 Amps, 5 pin, 2 in 1 complete all as specified and directed.

S&F in replacement, socket outlet multipurpose 5 and 15 Amps, 5 pin, 2 in 1 complete all as specified and directed.

S&F in replacement, switch socket combination 5 Amps, 5 pin 2 in 1, complete all as specified and as directed.

S&F in replacement, switch socket combination multipurpose 5 & 15 Amps, 5 pin, 2 in 1 complete all as specified and directed.

S&F in replacement, fan regulator electronic step type 100 W, 250 Volts complete all as specified and as directed.

S&F in replacement, capacitor for ceiling fans,230 volts, 2.5 MFD including necessary soldering complete all as specified and as directed. Make Havells Cat Part No. QHPCWC5002X5 or Keltron.

S&F in replacement, capacitor for any type of exhaust fan/ pedestial fan/ air circulator fan 230 volts AC including necessary soldering of capacity 4 MFD complete all as specified and directed. Make Havells Cat Part No. QHPCWC5004X0 or Keltron.

S&F in replacement, lamp holder, PVC/ poly carbonate type with back plate suitable for batten fittings, all as specified and directed.

S&F in replacement, Ceiling rose surface bakelite 65 x 50 mm, 3 terminals complete all as specified and as directed.

M&L in replacement sub main wiring with 4 runs of 10 Sqmm PVC insulated unsheathed multistranded single core copper conductor FRLSH, ISI marked cable drawn through ISI Marked, medium grade, non metallic, PVC Casing & Capping and all accessories, with 1 run of 10 Sq mm PVC insulated unsheathed multistranded single core copper conductor FRLSH, and making good disturbed surfaces, applying distemper/ Emulsions matching to the existing colour / quality of walls/floors/ceiling etc all as specified. Note:- Four run of 10 sqmm size PVC cable , one run of 10 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length

All as per item No 265 here-in-before but 2 runs of 4 sq mm single core FRLSH copper conductor and 1 run of 4 sqmm conductor for earthing. Note:- Three run of cable and one run of PVC casing and caping shall be measured as one unit. Note:- Two run of 4 sqmm size PVC cable , one run of 4 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length

All as per item No 265 here-in-before but 2 runs of 6 sq mm single core FRLSH copper conductor and 1 run of 6 sqmm conductor for earthing. Note:- Three run of cable and one run of PVC casing and caping shall be measured as one unit. Note:- Two run of 6 sqmm size PVC cable , one run of 6 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length

M&L in replacement sub main wiring with 4 runs of 10 Sqmm PVC insulated unsheathed multistranded single core copper conductor FRLSH, ISI marked cable drawn through ISI Marked, medium grade, non metallic, PVC conduits and all accessories, with 1 run of 10 Sq mm PVC insulated unsheathed multistranded single core copper conductor FRLSH, and making good disturbed surfaces, applying distemper / Emulsions matching to the existing colour / quality of walls/floors/ceiling etc all as specified. Note:- 4 run of 10 sqmm size PVC cable , one run of 10 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length

All as per item No. 268 here-in-before but 4 runs of 16 sq mm single core FRLSH copper conductor and 1 run of 16 sqmm conductor for earthing. Note:- 4 run of 16 sqmm size PVC cable , one run of 16 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length

All as per item No. 268 here-in-before but 2 runs of 4 sq mm single core FRLSH copper conductor and 1 run of 4 sqmm conductor for earthing. Note:-2 run of 4 sqmm size PVC cable , one run of 4 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length

All as per item No. 268 here-in-before but 2 runs of 6 sq mm single core FRLSH copper conductor and 1 run of 6 sqmm conductor for earthing. Note:- 2 run of 6 sqmm size PVC cable , one run of 6Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length

S&F in replacement, Sheet Metal Enclosure for MCB DB, TPN, 4 ways, double door, with 200 Amps rated bus bar, having IP-43 protection including taking down old DB complete all as specified.

S&F in replacement, Sheet Metal Enclosure for MCB DB, TPN, 8 ways, double door, with 200 Amps rated bus bar, having IP-43 protection including taking down old DB complete all as specified.

S&F in replacement, Sheet Metal Enclosure for MCB DB, TPN, 12 ways, double door, with 200 Amps rated bus bar, having IP-43 protection including taking down old DB complete all as specified.

S&F in replacement, Sheet Metal Enclosure for MCB DB, SPN, 8 ways, double door, with 200 Amps rated bus bar, having IP-43 protection including taking down old DB complete all as specified.

S&F in replacement, Sheet Metal Enclosure for MCB DB, SPN, 12 ways, double door, with 200 Amps rated bus bar, having IP-43 protection including taking down old DB complete all as specified.

S&F in replacement, Sheet Metal Enclosure for MCB DB, SPN, 4 ways, double door, with 200 Amps rated bus bar, having IP-43 protection including taking down old DB complete all as specified.

S&F in replacement, MCB TPN 63 Amps, 415 Volt, complete all as specified and directed. Make L&T Cat Part No. BB40630B or equivalent make in list of manufactures

S&F in replacement, MCB TPN 32 Amps, 415 Volt, complete all as specified and directed. Make L&T Cat Part No. BB40320B equivalent make in list of manufactures

S&F in replacement, MCB SPN 63 Amps, 415 Volt, complete all as specified and directed. Make L&T Cat Part No. BB20630B equivalent make in list of manufactures

S&F in replacement , MCB SP 6 to 32 Amps,415 Volt, complete all as specified and directed. Make L&T Cat Part No. BB10060B to BB10320B or equivalent make in list of manufactures

S&F in replacement , MCB SPN 6 to 32 Amps,415 Volt, complete all as specified and directed. Make L&T Cat Part No. BB20060B to BB20320B or equivalent make in list of manufactures

S&F in replacement LED glass T8 tube 20 watt,120 lumen/watt, 220 volt, 50 Hz, LED tube rod, double side connection, inbuilt driver, complete all as specified. Make:- Cat Part No-CRYSTAL1213T8DSTL20WLED865SGLASS of havells or equivalent make in list of manufactures

S&F in replacement LED light fitting 20 W, 120 lumen/watt, high performance batten , 220 volt ,50 Hz,6000 k surface mounted high quality extruded polycarbonate ,enviromental friendly ,energy efficient , with all connecting accessories ,with suitable connection complete all as specified.Make: cat part no-CCS-100-20-65-HL2-DP-NWH of crompton or equivalent make in list of manufactures

S&F in replacement LED light fitting 10 W,110 lumen/watt high performance batten , 220 volt ,50 Hz, surface mounted high quality aluminium extruded with all connecting accessories ,with suitable connection complete all as specified.cat part no-LDL-10-CDL of crompton or equivalent make in list of manufactures

S&F in replacement 15 Watt Square recessed mounted down lighter with high luminous LED for indoor application,230 volts ,50 Hzs ,min 100 lm /watt with all accessories and connection to the electric circuit complete all as specified .cat part no - LSDE-15-CDL of crompton or equivalent make in list of manufactures

S&F in replacement 12 Watt Square recessed mounted down lighter with high luminous LED for indoor application, 230 volts ,50 Hzs ,min 100 lm /watt with all accessories and connection to the electric circuit complete all as specified cat part no - LSDE-12-CDL of crompton or equivalent make in list of manufactures

S&F in replacement 15 Watt recessed round down lighter with high luminous LED for indoor application,230 volts, 50 Hzs, min 100 lm /watt with all accessories and connection to the electric circuit. complete all as specified cat part no - LCDE-15-CDL of crompton or equivalent make in list of manufactures

S&F in replacement 12 Watt recessed round down lighter with high luminous LED for indoor application, 230 volts, 50 Hzs, min 100 lm/ watt with all accessories and connection to the electric circuit complete all as specified. Cat Part No- LCDE-12-CDL of crompton or equivalent make in list of manufactures

S&Fin replacement indoor wall mounted light 12 watt ,140 volt to 265 volts,IP-20 ,50 Hz ,aluminium housing with all accessories and connection to the electrc circuit complete all as specified and directed cat part no -LWL105 of luker or equivalent make in list of manufactures

S&F in replacement mirror light 18 watt 50 hz,230 volts with all accessories and connection to the electric circuit. complete all as specified cat part no - LMCL18 of Luker, or equivalent make in list of manufactures

S&F in replacement mirror light 12 watt 50 hz,230 volts with all accessories and connection to the electric circuit. complete all as specified cat part no - LMCL12 of Luker, or equivalent make in list of manufactures

S&F in replacement Nickel plated mild steel clamps, Nuts, Bolts, Washers and split pin suitable for ceiling fans any type, any make, any size complete all as specified and as directed.

S&F in replacement Down rod, suitably threaded and holed, made out of 15 mm dia GI tubes, duly painted, 2' long, suitable for ceiling fans any type, any make, any size all as directed.

Ditto all as per item Ser No 294 above but 3' long complete all as specified and as directed.

Ditto all as per item Ser No 294 above but 5' long complete all as specified and as directed.

S& F replacement copper conductor multistranded cable flexible 03 core PVC insulated of size 40/0.076 at site/ MES store yard complete all as specified and directed.

S&F in replacement Fan canopy with tightening screw/check nut, made out of PVC, suitable for ceiling fans any type, any make, any size all as directed.

S&F in replacement Rubber reel insulator, suitable for ceiling fans any type, any make, any size all as directed.

M&L in replacement for hanging hook suare/ round shape for ceiling fan with nuts bolts and washer min thickness 5 mm all as specified and directed .

Taking down unserviceable ceiling fan of 1200mm/1400mm sweep, cutting out the existing burnt out fan motor winding, cleaning the motor slots, rewinding the motor with insulated copper winding wire of existing gauge, baking / heating up the motor to achieve the proper insulation resistance and re-hanging / refixing after repair including applying a coat of synthetic enamel paint (Glossy Finish) with spray gun, marking MES No complete all as specified.

All as per item No. 301 above but exhaust fan of 450/300/250 mm sweep complete all as specified.

All as per item No. 301 above but wall mounted fan of 400 /450 mm sweep complete all as specified.

All as per item No. 301 above but pedestal fans 600 /400 mm sweep complete all as specified.

All as per item No. 301 above but industrial air circulator fans of any sizes complete all as specified and directed

M&L in replacement Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanized iron wire 4 mm dia as earth up to 7.5 m distance and connected by means of bolts, nuts, checknuts and washers of galvanised iron or steel all shown in electric plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including provision of necessary excavation and earth work in any type of soil, PCC pit , RCC cover 50 mm thick, reinforced with 8 mm dia TMT bars both ways @ 10 CM c/c , 20 mm bore medium grade watering pipe, water funnel, 15 mm bore GI medium grade protection pipe, common salt, charcoal dust, returning, filling in of soil, removal of spoil to a distance not exceeding 50 mtr etc including testing on completion completeall as specified. Note :- (i) The unit rate includes for protection pipe and earth lead upto 7.50 Mtr. (ii) Earth lead beyond 7.50 Mtr length shall be measured and paid separately.

M&L in replacement earthing complete with galvanised steel earth plate elctrode 60 x 60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth strip 25 x 4 mm as earthing lead by means of bolts nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. point 3 connected to earthing test point all as specified or indicated including testing on completion.

S&F in replacement Modular Bell push 6A, 1module, complete all as specified and as directed.

S&F in replacement in repair Fan Regulator, modular electronic rotary,0-4 steps step type 100 Watt, 240 Volt 50 Hz hum free 2 module complete all as specified and as directed.

S&F in replacement switch modular 6 Amps 240 Volts one way switch complete all as specified.

S&F in replacement Socket 6 Amps AC 240 Volts 2/3 pin combined 2 modular type complete all as specified.

S&F in replacement Socket 6A/16 Amps-2/3 pin combined AC 240 Volts modular type complete all as specified.

S&F in replacement Switch modular type AC 240 volts 16 Amps one way complete all as specified.

S&F in replacement sunken box with Modular white cover plate 2 module with removing old type sunken boxes /wooden board and match with existing surfaces , complete all as specified.

S&F in replacement sunken box with Modular white cover plate 3 module with removing old type sunken boxes /wooden board and match with existing surfaces , complete all as specified.

S&F in replacement sunken box with Modular white cover plate 4 module with removing old type sunken boxes /wooden board and match with existing surfaces , complete all as specified.

S&F in replacement sunken box with Modular white cover plate 6 module with removing old type sunken boxes /wooden board and match with existing surfaces , complete all as specified.

S&F in replacement SPN enclosure with two pin and earth plug and socket complete with one SP MCB, 20 Amps having breaking capacity 10 kA, including taking down old unserviceable eath plug complete all as specified.

S&F in replacement triple pole enclosure with three pin and earth plug and socket complete with one TP MCB, 20 Amps having breaking capacity 10 kA, including taking down old unserviceable eath plug complete all as specified.

S&F in replacement XLPE insulated, galvanised steel strip or wire armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, cross-sectional area 6 sq.mm 2 core including taking down old unserviceable cable complete all as specified.

S&F in replacement XLPE insulated, galvanised steel strip or wire armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, cross-sectional area 10 sq.mm 4 core including taking down old unserviceable cable complete all as specified.

S&F in replacement XLPE insulated, galvanised steel strip or wire armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, cross-sectional area 16 sq.mm 4 core including taking down old unserviceable cable complete all as specified.

S&F in replacement LED cercullar Flood Light 30 Watt,50 Hz,220 volts having IP-66 protection, pressure die cast aluminium housing, high luminious efficiancy and high power complete all as specified. Cat part no-LFLR30 of Luker or equivalent make in list of manufactures

S&F in replacement LED Flood Light 50 Watt,50 Hz,220 volts having IP-66 protection, pressure die cast aluminium housing, high luminious efficiancy and high power complete all as specified.Cat part no-LFLR50 of luker or equivalent make in list of manufactures

S&F in replacement LED building security light 45 watts ,50 Hz,220 volts having IP-65 protection, pressure die cast aluminium housing, high luminious efficiancy and high power complete all as specified.Cat part no- ENDURAPEARLNEOSL40WLED757PASYTOPC of Havells or equivalent make in list of manufactures

S&F in replacement LED building security light 60 watts ,50 Hz,220 volts having IP-65 protection, pressure die cast aluminium housing, high luminious efficiancy and high power complete all as specified.Cat part no-ENDURAPEARLNEOSL60WLED757PASYTOPC of Havells or equivalent make in list of manufactures

S&F in repairs energy efficient ceiling fan BLDC of 1200mm sweep (5 star rated) 230 Volt, 50 Hz including all electrical connection all as specified and as directed and taking down old one and deposited with MES store yard. Make : Havells Cat Part No. Efficiencia Neo (BLDC 26W) or equivalent make in list of manufactures

S&F in replacement PVC body exhaust fan motor suitable for 250/300 mm of any make as per site requirement all as specified and directed.

S&F in replacement exhaust fan motor suitable for metallic body exhaust fan of any make as per site requirement all as specified and directed.

Supply & fix PVC body wall fans 230 volts single phase oscillating 400 mm sweep suitable for wall mounting. Make : Havells Cat Part No. Girik or equivalent make in list of manufactures

S&F 250mm sweep, PVC body exhaust fan heavy duty, single phase 230 volts, all as specified & directed. Make : Havells Cat Part No. Ventil Air-DX white or Crompton Cat Part No EXHD300-4-1 / Bajaj or equivalent make in list of manufactures Note : Old fan will be deposited in MES store yard.

Attending complaint including transportion of tools for rectification of urgent nature of electrical complaints like checking of existing electrical items for continuous electric supply including carrying out minor repairs such as checking of voltage calibration,checking of variation of R Y B phase in LT panel/DBs ,changing of MCBs, small pieces of wires including connections etc carrying out repairs such as tightening of loosen electric connections, nuts, bolts, screws of switches, sockets, switch boards, making joints and covering with PVC tape, minor repairs to ceiling fans / exhaust fans like replacement of capacitors, cleaning and oiling etc. as required to make the electrical items/ appliances fully functional at SMA area at Naval Base during off hours (1700 hrs evining to 0900 Hrs morning) on all working days all as specified and directed by Engineer-in-Charge. NOTE:- (i) The contractor should display contact number at complaint cell to register users complaint. (ii) The recovery of rupees 400 per complaints will be charged if contractor failed to attend that instipulated time period. (iii) Number of complaints may vary day to day and shall be on required basis. Contractor shall quote their rates accordingly.including in all aspects like labours,tool,transportation etc.

M&L for checking of ceiling fans stability (like fan hooks,nuts, bolts ,hanging rod ,canopy ,washer etc) exhaust fan stability ,loose connection in destribution boards,MCBs in SMA Area at Naval base all as specified and directed by engr in charge. Note: - 1. The contractor should prepaired a register and enter office name with signature of offce incharge and submited to engineer in charge office. 2. Checking of 7 fans and 2 DBs of any type at a time is shall be considered as one job.

M&L for checking of faulty / jumped energy meter (three phase /single phase) with fixing of new energy meter in series and after one week submmitted meter reading report of both energy meter in engr in charge office all as specified and directed by engr in charge

M&L in replacement aluminium strip 25 x 3.15 mm with porcelain insulators,saddles and fixing screws etc for roof conductor and down conductor above ground all as specified and directed.

M&L in replacement air termination single pointed aluminium rod 12mm dia and 300mm long all as specifed and directed.

M&L for test point terminal block made of gunmetal of size 75x75x25mm drilled and screened including all fixing arrangements with hexagonal headed screws and taking down old ones complete all as specified.

M&L for Checking of earthing resistence and E-N voltage with caliberated earth tester meter and multimeter including recharging of conventional earthing of lightening arrestor of building /workshop/hanger /OTM etc at Naval Base Kochi complete with chemical,maintaining the earth testing record,rectification of earthing related fault also as per user signature and JE E/M verified by Engineer in charge.

M&L in replacment galvanised steel strip 32mmx6mm complete with,protection sleeves, saddles,seprator and fixing screws at surrounding inside and outside the bldg. directed as per engineer in charge.

M&L in replacment galvanised steel strip 25mmx4mm complete with,protection sleeves, saddles,seprator and fixing screws at surrounding inside and outside the bldg. directed as per engineer in charge.

M&L in replacment of eathing chamber of any type any size with necessory pcc work required with smooth surface duly coloured after repair work and cover of the size of the earth pit comple all as specified and directed.

S&F in replacement 4mm dia galvanised iron or steel wire burried in ground fixed on walls and connected to main earth strip including excavation and earth work ,refilling etc. compete all as specified and as directed.

S&F in replacement for rigid non metalic PVC medium grade conduit including junction boxes, tee, bends, elbows, reducers bell mouth tube ends,fixing accessories such as couplers, lock Nuts, saddle pipe hook etc for 25 mm dia.ISI Marked

S&F in replacement SS enclosure suitable for MCCB 100-200 amp complete all as specified and directed.Make L & T cat CM91003OOOO or equivalent make mentioned in list of manufactures

S&F in replacement MCCBs FP 63 Amps thermal magnatic 25 kA complete all as specified and directed by Engineer in Charge. Make L & T Cat No CM91712OOJOOG or equivalent make mentioned in list of manufactures

S&F in replacement MCCBs FP 100 Amps thermal magnatic 25 kA complete all as specified and directed by Engineer in Charge. Make L & T Cat No CM90642OOLO or equivalent make mentioned in list of manufactures

S&F in replacement MCCBs FP 160 Amps thermal magnatic 25 kA complete all as specified and directed .

S&F in replacement MCCBs FP 200 Amps thermal magnatic 25 kA complete all as specified and directed.

S&F in replacement on wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 40 mm dia including taking down old one complete all as specified and directed. Make: Supreme/Eurotech /Astral/SFMC

All as per item No. 349 here-in-before but of size 25 mm dia complete all as specified and directed

All as per item No. 349 here-in-before but of size 20 mm dia complete all as specified and directed

S/F in replacement CPVC Ball Valve of size 40 mm dia suitable for CPVC pipe incl necessary fittings and taking down old one complete all specified and directed.

S/F in replacement CPVC Ball Valve of size 25 mm dia suitable for CPVC pipe incl necessary fittings and taking down old one complete all specified and directed.

S/F in replacement CPVC Ball Valve of size 20 mm dia suitable for CPVC pipe incl necessary fittings and taking down old one complete all specified and directed.

S&F in replacement of Loft water storage tanks (Rectangular with closed top) an elite plastic loft tank manufactured with “Bi-Axial Rotational Moulding" hoisted & fixed in position of capacity 200litre incl taking out unserviceable old one, complete all as specified and as directed .

S&F in replacement of bib tap Chromium plated (CP), half turn with flange and areator, fancy type short body cast copper alloy with crutch or butterfly handle screwed for GI/cpvc pipe of size 15mm and taking down old, complete all as specified and as directed .(Make : Cera cat Part No F2004151 or equivalent make in list of manufactures)

S&F in replacement of bib tap Chromium plated (CP),half turn with flange and areator, fancy type long body cast copper alloy with crutch or butterfly handle screwed for GI/cpvc pipe of size 15mm and taking down old ,complete all as specified and as directed by the Engineer-in-charge. (Make : Cera cat Part No F2004152 or equivalent make in list of manufactures)

S&F in replacement of Chromium plated (CP) bib cock short body with flange and nozzle for garden/wahing machine of size 15mm and taking down old one, complete all as specified and as directed by the Engineer-in-charge.(Make : Cera Model No F 2003153 or equivalent make in list of manufactures)

S&F in replacement of two way bib cock ,half turn with flange and areator of size 15mm and taking down old, complete all as specified and as directed by the Engineer-in-charge(Make : Cera Model No F 2004163 or equivalent make in list of manufactures)

S&F in replacement concealed stop cock regular body, half turn with flange chromium plated CP cup fancy type of size 20mm and taking down old one, complete all as specified and as directed by the Engineer-in-charge.(Make : Cera Model No F 2004351 and F4050502 or equivalent make in list of manufactures)

S&F 15mm angle valve, half turn with flange, with flange type chromium plated for fixing with CPVC pipe and taking down old one, complete specified and as directed by the Engineer-in-charge.(Make : Cera Model No F 2004201 or equivalent make in list of manufactures)

S&F in replacement of swivel overhead shower (minimum weight 40grams) of PTMT any colour with shower arm (minimum weight 40 grams) 15mm size, 195mm long with bend of 45 degree with flange for fixing with CPVC pipe and taking down old one,complete and all as specified and as directed .

S&F PVC connection pipe 16mm dia (outer 450mm long cold water and taking down old one complete with brass union on both sides to suit 15mm GI pipe and taking down old one, complete all as specified and directed.

S&F in replacement health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe, including taking out old one all as per specified and directed (Make : Cera Model No F 8030102 or equivalent make in list of manufactures)

S&F shower/ health faucet wall holder, brass chromium plated 20mm size, including taking out old one all as per specified and directed (Make : Cera Model No F 8070102 or equivalent make in list of manufactures)

S&F in replacement pillar taps, half turn with areator, cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed for 15mm bore pipe, and taking down old one, complete all as specified and directed .

S&F in replacement clinical bib cock long body with flange, areator and long handle screwed for GI/cpvc pipe of size 15mm and taking down old, complete all as specified and as directed by the Engineer-in-charge. (Make : Cera Model No:F 9030152 or equivalent make in list of manufactures)

M&L for cutting chasses on walls floor etc not exceeding 10cm girth and making good the disturbed surface to match with the existing after removing the existing concealed pipe/laying new pipe, complete all as specified and directed .

M&L for cement concrete in foundations, filling and mass concrete type 1:3:6(40mm graded aggregate)

Taking down defective Geyser of capacity 25 ltrs from its existing position duly disconnected inlet/outlet water connection and opening up geyser for checking old defective parts and replaced the defective parts which required for repairing including testing and commissioning the same after successful repairing complete including refixing the same on its existing position and making connection inlet/outlet water connection complete all as specified and directed by Engr-in-charge. Note : The spares required for servicing the geyser shoud be paid seperately under releveant item of the schedule.

Supply only Thermostat suitable for 25 and 50 litrs capacity Geyser any make/type including taking out old one complete all as specified and directed by Engr-in-charge..

Supply only Heating element 1.5 KW/2 KW ISI marked for 25 and 50 litrs capacity Geyser any make/type including taking out old one complete all as specified and directed by Engr-in-charge.

S&F in replacement Chromium Plated Pipe for Hot and Cold water as per suitable length 12mm dia with two brass adopter and connecting up complete including taking out old one complete all as specified and directed by Engr-in-charge.

Supply only gasket for 25/50 capacity Geyser including taking out old one complete all as specified and directed by Engr-in-charge. .

S&F in replacement indicating lamp suitable for 25/50 ltrs Geysers including taking out old one complete all as specified and directed .

S/F inner tank made out of cast copper alloy, ISI Marked, suitable for any type, any make geyser, for the 25 Litre capacity complete all as directed

S/F Metallic Outer cover including bottom and top cover duly painted suitable for 25 Litre capacity complete all as directed for the following:-

M&L for repairs to 25 Litre geyser metallic inner tank, arresting the leakage by welding, brazing etc, pressure testing after repairs, complete all as directed.

S/F in replacement float valve synthetic(PVC) of size 40 mm dia high pressure with polythene ball of size 6" dia and flynut including taking down old one complete all as specified and directed.

S/F in replacement float valve synthetic(PVC) of size 25 mm dia high pressure with polythene ball of size 6" dia and flynut including taking down old one complete all as specified and directed.

S/F in replacement float valve synthetic(PVC) of size 20 mm dia high pressure with polythene ball of size 6" dia and flynut including taking down old one complete all as specified and directed

S&F in replacement CP angle cock,Self closers Pressmatic with wall flange and 200 mm connecting pipe for urinal pots to fixed in 15/20 mm Pipe,complete all as specified (Make : Cera Model No:F 9020203 or equivalent make in list of manufactures

S&F in replacement of Rotational mouldede polyethylene water storage tanks (cylinderical vertical with closed top) hoisted & fixed in position of capacity 2000 liters incl taking out u/s old one complete all as specified and directed

All as per item No. 383 above but 1000 ltr cap complete all as specified and directed

All as per item No. 383 above but 500 ltr cap complete all as specified and directed

S&F in replacement wall mixer (3- in - 1) with arrangment of both Telephonic shower and over head shower with 210 mm long bend pipeand taking down old unserviceble one complete all as specified and as directed . Make- CERA Cat Part No. F1018403 or equivalent make in list of manufactures

Material, labour, transport and tools for rectification of urgent nature water supply complaints at Naval Base as and when required (SMA Area, Naval Base Kochi) during all working day ,sunday/ holyday /off hours on all working days all as directed by Engineer-in-Charge. NOTE:- (i) The material incorperated for completion of work will be measured and paid seperately under relevent item. (ii) The contractor should display contact number at (C&D Area, Naval Base Kochi) to register users complaint. (iii) The recovery of rupees 400/- complaint will be chargeable if contractor fails to attend complaint.

S&F in replacement rotate and lock type cover for over head water tank (HDPE) of capacity 200 Ltrs including taking down old unserviceble tank cover complete all as specified and as directed..

S&F in replacement rotate and lock type cover for over head water tank (HDPE) of capacity 500 Ltrs including taking down old unserviceble tank cover complete all as specified and as directed..

S&F in replacement rotate and lock type cover for over head water tank (HDPE) of capacity 1000 Ltrs including taking down old unserviceble tank cover complete all as specified and as directed..

S&F in replacement rotate and lock type cover for over head water tank (HDPE) of capacity 2000 Ltrs including taking down old unserviceble tank cover complete all as specified and as directed..

S&F in replacement roatate and lock type cover for over head water tank (HDPE) of capacity 5000 Ltrs including taking down old unserviceble tank cover complete all as specified and as directed..

M&L for two coats of colour wash on water tank staging including complete removel of existing treatment by using steel wire brushes or steel scrapers and shal be washed with clean water before application of colour wash at any heiht complete all as specified and as directed..

M&L for scrubbing cleaning,thoroughly removing all scale and dirt, mud sediments, silts etc from the internal surfaces of HDPE storage tanks OF below 500 Ltrs (bottom and wall) by using brushes, bleaching powder and other cleaning materials as required including writing the words " DATE OF CLEANING" in capital letters of suitable size on outside visible place of with synthetic enamel paint(white) over black back ground of 500 ltrs capacities complete all as specified and as directed..

All as per item No. 394 here-in-above, but 1000 litres capacity complete all as specified.

All as per item No. 394 here-in-above, but 2000 litres capacity complete all as specified.

All as per item No. 394 here-in-above, but 5000 litres capacity complete all as specified

All as per item No. 394 here-in-above, but 10000 litres capacity complete all as specified

S&F of Kitchen sink cock quarter turn wall mounted with swivel spout not less than 150 mm and wall flange complete including taking down old one complete all as specified and as directed .Model No: F2004251 of CERA or equivalent make in list of makes

S&F in repair Plug top 15 amp 230 V, complete all as directed.

S&F in repair PVC sheathed , multi stranded copper conductor , 3 core , flexible cable , 1100 V grade, 2.5 sqmm, Ac connecting complete all as directed.

S&F fusible plug made out of brass with internal or external threading suitable for any type, any make geyser of 25 Ltr complete all as specified and as directed .

M&L for preparing the surface of any type, any make geyser, removing the existing painting by scraping, cleaning, filling the cavities and applying two coats of red oxide primer including writing the MES number complete all as specified and as directed for the size 25 Ltrs capacity.

S&F pressure/air release valve suitable for any type any make geyser made out of brass 15 mm complete all as specified and as directed.

S&F Non-return valve, made out of brass 15 mm bore, complete all as specified and as directed

S&F Non-return valve, made out of brass 25 mm bore, complete all as specified and as directed

S&F geyser safety valve of any type complete all as specified and as directed.

S&F angle valve 2 in 1 of size 15 mm dia complete all as specified and as directed.

S&F CPVC tank connector of size 32 mm dia complete all as specified and as directed.

S&F heavy spindle of size 15 mm dia complete all as specified and as directed.

S&F normal spindle of size 15 mm dia complete all as specified and directed.

S&F vertical type Geyser (Water Storage Heater) 25 litres, 230 volt., 50 Hz, working pressure 0.8 mpa with storage tank of mild steel material 5 star rating including necessary grouting complete all as specified and directed. Make : V-Guard Cat Part No. SPRINHOT PLUS / Havells / Bajaj / Crompton or equivalent manufacturers mentioned in list of manufacturers complete all as specified and as directed.

S&F wall mixer spindle of size 20 mm dia complete all as specified and directed.

S&F wall mixer knob of suitable size complete all as specified and directed.

S&F concealed cock spindel of size 15 mm dia complete all as specified and directed.

Albert Rebello and Company