Construction of Second floor for GEKC class room and dining hall on existing GEKC building at P. H. Campus, Jamnagar Circle (2nd attempt)

NAME OF WORK : Construction of Second floor for GEKC class room and dinning hall on exisiting GEKC

building at P. H. Campus, Jamnagar Circle (2nd attempt).

ITEM QTY PER RATE AMOUNT

1 Demolition including stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift. (i) R.C.C. Work 4.00 Cu.M. 1097.15

2 Demolition of Brick work and stone masonry including stacking of

serviceable materilas and disposal of unserviceable materials with all lead

and lift.(ii) In Cement Mortar. 5.00 Cu.M. 570.59

3 Removing and scraping of old deteriorated plaster of any thickness fromm

wall / R.C.C member including stacking of serviceable material and

disposal of unserviceable from site of work with all lead and lift 138.00 Sq.M 20.16

4 Dismentaling tiled of stone floors laid in mortar including stacking of

serviceable materilas and disposal of unserviceable materials with all lead

and lift. 382.00 Sq.M 49.78

5 Excavation for foundation up to 1.5M depth including sorting out and

stacking of useful materials and disposing of the excavated stuff upto

50M. Lead. (B)Loose or soft soil. 10.00 Cu.M. 124.61

6 Excavation for foundation up to 1.5M depth including sorting out and

stacking of useful materials and disposing of the excavated stuff upto

50M. Lead. (B)Dense or hard soil. 15.00 Cu.M. 159.48

7 Excavation for foundation up to 1.5M to 3.0M. depth including sorting

out and stacking of useful materials and disposing of the excavated stuff

upto 50M. Lead. (D)Hard murrum 9.00 Cu.M. 291.14

8 Providing and laying cement concrete 1:3:6 ( 1-Cement : 3-Coarse sand :

6-Hand broken stone aggregate 40MM nominal size ) and curing

complete excluding cost of formwork in (A) Foundation and plinth. 3.50 Cu.M. 3075.91

9 Providing and laying autoclave aerated concrete blocks as per drawing in

single or multiple layers with Ready mix joining mortar. Crushing

strength of aerated concrete block shall not be less than

KG/sqcm, minimum density in oven dry condition between 651 to

KG/CUM, thermal conductivity shall not exceed 0.30 w/mk, fire resistant

4 hours, in true line level and plumb and cleaning the surface with

necessary tool tackles The drying shrinkage shall be not more than

0.05 percent for Grade 1 blocks and 0.10 percent for Grade

blocks when tested in accordance with IS : 6641 (Part-2)-1972 etc. at all

floors, any heights, all depths, any levels (in foundation and

superstructure) and all places including curing, scaffolding, racking /

flush jointing etc complete, as per drawing / specification and approved

by architect and as directed by Engineer Incharge for all civil,

plumbing, electrical & infrastructure work

10 Providing and laying autoclave aerated concrete blocks as per drawing in

single or multiple layers with Ready mix joining mortar . Crushing

strength of aerated concrete block shall not be less than

KG/sqcm, minimum density in oven dry condition between 651 to

KG/CUM, thermal conductivity shall not exceed 0.30 w/mk, fire resistant

4 hours, in true line level and plumb and cleaning the surface with

necessary tool tackles The drying shrinkage shall be not more than

0.05 percent for Grade 1 blocks and 0.10 percent for Grade

blocks when tested in accordance with IS : 6641 (Part-2)-1972 etc. at all

floors, any heights, all depths, any levels (in foundation and

superstructure) and all places including curing, scaffolding, racking /

flush jointing etc complete, as per drawing / specification and approved

by architect and as directed by Engineer Incharge for all civil,

plumbing, electrical & infrastructure work

c) Second Floor

ITEM QTY PER RATE AMOUNT

11 Providing and laying autoclave aerated concrete blocks as per

drawing (Thickness 100 - 115 mm ) in single or multiple layers with

Ready mix joining mortar Crushing strength of aerated concrete block

shall not be less than 40 KG/sqcm, minimum density in oven dry

condition between 651 to 750 KG/CUM, thermal conductivity shall

not exceed 0.30 w/mk, fire resistant 4 hours, in true line level and plumb

and cleaning the surface with necessary tool tackles, The drying

shrinkage shall be not more than 0.05 percent for Grade 1 blocks

and 0.10 percent for Grade 2 blocks when tested in accordance with

IS : 6641 (Part-2)-1972 etc. at all floors, any heights, all depths, any

levels (in foundation & Superstructure) and all places including

curing, scaffolding, racking / flush jointing etc complete, as

per drawing / specification and approved by architect and as directed

by Engineer -Incharge. . For all civil, plumbing, electrical & infrastructure

c) Second Floor

12 Providing and laying controlled cement concrete M-200 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in [A] Foundation, footings,

Base of columns and Mass concrete. 3.00 Cu.M. 5165.36

13 Providing and laying controlled cement concrete M-200 and curing

complete including the cost of form work and excluding reinforcement for

R.C.C work in [D] Columns 3.00 Cu.M. 8852.87

14 Providing and laying controlled cement concrete M-200 and curing

complete including the cost of form work and excluding reinforcement for

R.C.C work in [D] Columns at first floor 4.00 Cu.M. 8894.03

15 Providing and laying controlled cement concrete M-200 and curing

complete including the cost of form work and excluding reinforcement for

R.C.C work in [D] Columns at second floor 16.50 Cu.M. 8935.19

16 Providing and laying controlled cement concrete M-200 and curing

complete including the cost of form work and excluding reinforcement for

R.C.C work in [C] Beams 2.00 Cu.M. 6879.24

17 Providing and laying controlled cement concrete M-200 and curing

complete including the cost of form work and excluding reinforcement for

R.C.C work in [C] Beams at first floor 4.00 Cu.M. 6920.40

18 Providing and laying controlled cement concrete M-200 and curing

complete including the cost of form work and excluding reinforcement for

R.C.C work in [C] Beams at second floor 25.00 Cu.M. 6961.56

19 Providing and laying controlled cement concrete M-200 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in [ C ] Lintels at first floor 1.00 Cu.M. 5879.10

20 Providing and laying controlled cement concrete M-200 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in [ C ] Lintels at second

floor 3.00 Cu.M. 5920.26

21 Providing and laying controlled cement concrete M-200 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Chajjas at first floor 1.00 Cu.M. 7336.92

22 Providing and laying controlled cement concrete M-200 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Chajjas at second floor 2.00 Cu.M. 7378.08

23 Providing and laying controlled cement concrete M-200 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Staircase at first floor. 4.00 Cu.M. 7365.41

24 Providing and laying controlled cement concrete M-200 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in SLAB at first floor. 7.00 Cu.M. 7304.64

25 Providing and laying controlled cement concrete M-200 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in SLAB at second floor. 38.00 Cu.M. 7345.80

ITEM QTY PER RATE AMOUNT

26 Providing Thermo Mechanically treated bar F.E. 500D Steel

reinforcement as per I.S. Standard for R.C.C work including bending,

binding and placing in position complete upto Ground floor evel. 660.00 Kg 76.52

27 Providing Thermo Mechanically treated bar F.E. 500D Steel

reinforcement as per I.S. Standard for R.C.C work including bending,

binding and placing in position complete upto first floor evel. 2600.00 Kg 77.58

28 Providing Thermo Mechanically treated bar F.E. 500D Steel

reinforcement as per I.S. Standard for R.C.C work including bending,

binding and placing in position complete upto second floor evel. 9300.00 Kg 78.64

29 Providing 15MM thick cement plaster in single coat on Brick/concrete

walls for interior plastering at ground floor level finished even and smooth

in Cement Mortar 1:3 ( 1-Cement :3-Sand ) for walls GF 40.00 Sq.M 182.86

30 Providing 15MM thick cement plaster in single coat on Brick/concrete

walls for interior plastering at first floor level finished even and smooth in

Cement Mortar 1:3 ( 1-Cement :3-Sand ) for walls at FF 180.00 Sq.M 207.08

31 Providing 15MM thick cement plaster in single coat on Brick/concrete

walls for interior plastering at second floor level finished even and smooth

in Cement Mortar 1:3 ( 1-Cement :3-Sand ) for walls at SF 530.00 Sq.M 231.30

32 Providing 10 MM thick cement plaster in single coat on Brick/concrete

walls for interior plastering at first floor level finished even and smooth in

Cement Mortar 1:3 ( 1-Cement :3-Sand ) for ceiling at FF 52.00 Sq.M 185.75

33 Providing 10MM thick cement plaster in single coat on Brick/concrete

walls for interior plastering at second floor level finished even and smooth

in Cement Mortar 1:3 ( 1-Cement :3-Sand ) for ceiling at SF 280.00 Sq.M 207.94

34 20MM thick sand faced cement plaster on walls upto height 10meters

above ground level/all floor consisting of 12MM thick backing coat of

Cement Mortar 1:3 ( 1-Cement : 3-Sand ) and 8MM thick finishing coat

of Cement Mortar 1:1 ( 1-Cement : 1-Sand ) etc. complete. 705.00 Sq.M 320.01

35 Providing cement vata ( 10Cm x10Cm ) size quarter round in cement

concrete in C.M. 1:1 including neat cement finishing, watering etc.

complete. 30.00 Meter 24.04

36 Providing and laying 24"x24" Vitrified 8mm thick tiles in flooring and

skirting over 20mm (average) base of cement mortar 1:6 ( 1-Cement : 6-

Coarse sand ) on new surface or fixing on existing flooring by adhesive

material including dismantling of existing flooring and jointed with colour

cement slurry including finished with flush pointing and cleaning the

surface etc complete, for Light Shade as directed by EIC. 340.00 Sq.M 1496.72

37 Providing and laying coloured glazed tiles of the size 300 mm x 200 mm

x 8 mm / 300 mm x 450 mm x 8 mm or larger size in skirting, risers of

steps and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse

sand) & jointed with white cement slurry. 83.00 Sq.M 1508.58

38 Providing and layin 25MM thick Kotah stone slab flooring over 20MM

(average) thick base of Cement Mortar 1:6 ( 1-Cement : 6-Coarse sand )

or lime mortar 1:1.5 laid over and jointed with grey cement slurry

including rubbing and polishing complete. [A] 25MM thick as directed by

39 Providing and laying Kotah stone slab 25 MM thick in risers of steps,

tread of steps, dedo , skirting and pillars laid on 10 MM thick Cement

Mortar 1:3 ( 1-Cement : 3 -Coarse sand )and jointed with grey cement

slurry including necessary groove, rubbing and mirror polishing etc

complete as directed by EIC. 19.00 Sq.M 1159.80

40 Providing and laying 25MM thick, both faces polished Kotah stone with

all edges machine cut, 450mm to 600mm width and of required length (

only one piece to be used ) of approved quality for cup board shelves,

wall partition etc. including fixing the same in masonary wall by cement

mortar in three sides including curing etc. complete as directed by EIC. 4.00 Sq.M 1321.20

41 Providing and laying marble stone slab flooring over 20mm (average)base

of cement mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1:1.5(1- lime

putty : 1.5 - coarse sand) laid and jointed with gray cement slurry

including rubbing and polishing complete. (A) Marble slab 25mm thick

ITEM QTY PER RATE AMOUNT

42 Providing and laying broken chine mosaic flooring for terrace using

mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar

1:3 to plain or slope and to be tempered to bring mortar creme out upto

surface using white cement including rounding off junctions and

extending them upto 15 cm along the wall,clearing with water and oxalic

acid etc. as directed. 325.00 Sq.M 771.98

43 Wall painting (two coats) plastic emulsion paint on wall and ceiling

including two coats applying putty & primer of approved brand and

manufacture on undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth.

44 Providing and applying 1 coat of approved make of cement primer paint

including scaffolding watering etc. complete as directed by EIC. 1100.00 Sq.M 28.00

45 Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials.etc complete 1100.00 Sq.M 120.93

46 Providing and fixing MS grills or required pattern to frames of windows

etc. with MS flats at required spacing and frame all round square or round

bars with round headed bolts and nuts or by screws/welding with three

coats of oil paint including a priming coat etc complete as directed by

EIC. [A] Plain grill. 600.00 Kg 116.20

47 Providing and fixing 50MM Stainless steel pipe hand railing for staircase

with necessary Balusters, Vertical pipes of required diameter fixing the

same by airldite necessary welding etc as directed by EIC. 10.50 Meter 2980.00

48 Providing & fixing hot pressed phenol bonded, exterior type solid flush

door 30mm shutter made by approved brand & as per I.S.I. standard with

water resisting plywood facing and 1mm thick laminated sheet on both

side of door. 7.00 Sq.M 3117.00

49 Providing and fixing FRP of 28mm thick Fibre Glass shutter with 1.5 to

2.0 mm thick fire retardent grade FRP skin in depressed panel design

having extra reinforcement on sides & edges & in Gel coat finish. The

core of the shutter is to be filled up with injected retardent grade

polyurethane foam done in situ alongwith embedded wooden pieces for

stiffening & also taking hinges & fintures. The whole FRP frame &

shutter is to be water proof ,weather proof, termite proof & resistance to

mild acid/alkali. Rates are to be inclusive of S.S hinges with necessary

screws & alluminium S.S. fixtures & fastenings & fastener sleeve

50 Supplying fitting & fixing in position fully double glazed panelled door

fixed & openable in double or single leaf anodised aluminium

entrance decorative door with aluminium framed size & shape as per

design given by EIC and size using extruded section fabricated by

standard manufacturers including necessary fixing arrangement, all

fixtures and fastenings of aluminium anodised and coloured powder

coating as per requirement with lock & 5.5mm thick Triveni make or

plain glass HB4 fixed with special transparent gasket and aluminium

beading, hydraulic floor mounted door closer and fixing godrej make

mortise lock etc. Glass pannel with frosting work of PGVCL monogram

and necessary design as directed. Rates with all labour and materials

complete as per drawing & as directed by E.I.C. 13.00 Sq.M 4082.00

ITEM QTY PER RATE AMOUNT

51 Providing and fixing window having extruded aluminum Colour anodized

section frame main outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg /

Rmt, horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm

@ wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x 31.75mm x

1.30 mm @ wt.of 0.659 Kg/mt with sliding shutters of horizontal member

size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical member of

size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt

with 5 mm thick transparent bronz colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc complete for window.

52 Providing and fixing standared extruded of alluminium section of size

63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized

alluminium frame for ventilation with 5 mm thick frosted glass as details

etc complete for Ventilation 1.00 Sq.M 1163.92

53 Providing erecting and fixing double coated ISI water tank of required

capacity each with all necessary fittings and connection etc. complete on

terrace 2000.00 Litre 3.91

54 Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete.[A]

mm 10.00 Meter 168.67

55 Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete.[A]

mm 15.00 Meter 251.31

56 Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete.[A]

mm 10.00 Meter 334.89

57 Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete.[A]

mm 10.00 Meter 443.29

58 Providing & fixing to wall, ceilling, flooring plumb by means of GI

clamps of 18 gauge sheet with 1 to 1.5 mtrs. Distance 10 Kg.F /cm2

working pressure PVC pipes incl. joining with approved solution & all

fittings like bend, tee. Y bend plug bend with water tight joints( Finolex

or equivalent )for soil waste & ventilating pipes etc. of the following

outside dia. Low density complete with necessary fittings, wall clamps

etc. including making groove in the wall ,ceiling & floor -75 mm dia 10.00 Meter 277.46

59 Providing & fixing to wall, ceilling, flooring plumb by means of GI

clamps of 18 gauge sheet with 1 to 1.5 mtrs. Distance 10 Kg.F /cm2

working pressure PVC pipes incl. joining with approved solution & all

fittings like bend, tee. Y bend plug bend with water tight joints( Finolex

or equivalent )for soil waste & ventilating pipes etc. of the following

outside dia. Low density complete with necessary fittings like shoe / bend

, wall clamps etc. including making groove in the wall ,ceiling & floor -

110 mm dia[ If pipe laid in trenches earth work will be paid seperately ]

60 Providing and fixing wash down closet (European W.C. Pan) with

integral "P" or "S" trap and PVC flushing tank cistern with fittings and

including plastic seat and cover with brass hinges and rubber buffersand

PVC connector , jet spray , nozzle etc. including jointing trap with soil

pipe in C.M. 1:1 ( 1-Cement : 1-Fine sand ) and PVC tank with float

valve etc.connecting cistern with closet etc., comp.in working condition-

Vitreous in colour. 2.00 No. 3241.83

ITEM QTY PER RATE AMOUNT

61 Providing and fixing Urinal of approved quality including connecting the

Urinal with waste pipe, tap etc complete. [A] White earthenware flat back

or corner type size 430MM X 260MM X 350MM. 3.00 No. 1064.22

62 Providing and fixing wash basin with single hole for pillar tap with

providing and fixung 15mmC.P. brass quarter turn pillar tap, capstan

head screw down high pressure with screws, shanks and back nutswith

C.I. or M.S. Brackets painted white paint including cutting holes and

making good the same including C.P. brass waste and waste Pipes -

vitreous china.-Flat back washbasin 550 x 400 mm. Size - in colour. 2.00 No. 1998.00

63 Providing and fixing screw down bib taps of following size [B] Brass

chromium plated screws down Bib tap. [I] 15MM dia. 4.00 No. 157.29

64 Providing and fixing Gun metal check or non-return full-way wheel valve.

65 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of

cutting and making good the walls.

66 Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of cover with frame to be not less

than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on

walls and bed concrete etc. complete.(i) Inside dimensions 455mmx

610mm and 450mm deep for single pipe line. 2.00 No. 2903.89

67 Providing and fixing 600 x 450mm bevelled edge mirror of superior glass

mounted on wall by SS stud of appropriate size as directed by EIC.

68 Providing and fixing of ISI approved quality Hydraulic door closer as

directed. 4.00 No. 1050.00

69 Providing and fixing C.P Brass towel rail complete with C.P Brass

brackets fixed to wooden plugs with C.P Brass screws. [B] 600MM X

20MM size. 2.00 No. 610.32

70 Providing and fixing acrylic plated soap container with screws etc

complete. 2.00 No. 150.00

71 Flat Latch ( Aluminium ) - 250 MM long. 6.00 No. 70.00

72 Handle ( Aluminium ) - 150MM long. 4.00 No. 22.00

73 Door Stopper ( Brass ) - 150MM long. 4.00 No. 100.00

74 Tower Bolt ( Stainless steel ) - 150MM long. 4.00 No. 50.00

75 S.S best Chromium plated Aldrop - 12MM dia. & 200MM long. 2.00 No. 80.00

76 S.S best Chromium plated Aldrop - 14MM dia. & 300MM long. 2.00 No. 150.00

77 Providing and fixing M.S Fan clamps type 1 of 16 MM dia. M.S bar bent

to shape with hooked ends to RCC slabs curing, laying including painting

the exposed portion of loops, all as per standard design complete.

78 Providing & fixing anodized alluminum partition having style & rail

63.5x38.10 of Jindal Section no @ Wt 235 gm/Rft)Partly penneled and

partly glazed with 5 mm thick glass including fitting on wall or at opening

complete with rubber on all four side for air tight fitting incl. all fixtures

& fastenings & decoritive film on glazing as directed by E.I.C. 15.00 Sq.M 3325.00

79 Providing and fixing of wall cupboard shutter , having 18mm ply wood

shutters using decorative laminate of approved shade and quality on out

side and white laminate on inner side with wooden beading Patti with

colour ,if reqd. wooden frame of 2inchX1.5inch with colour/polish with

all cromium plated hardware material and with locking arrengement and

hinges etc. complete incl. locking arrangement,,magnet etc. complete all

materials and labour as per direction of EIC. 10.00 Sq.M 4002.00

80 Providing and fixing steel basket for kitchen platform as per EIC. 9.00 No. 1300.00

ITEM QTY PER RATE AMOUNT

81 Providing and fixing False ceiling with RAMCO HILUX Plain Tile

600x600x8mm without paint(100% Water proof & 4Hrs Fire Rated Tile)

suspended with Amazone GI powder coated T Grid system consting of

main Runner, Cross Runner, Short runner & Wall angle with all necessary

accessories & fitting as directed by EIC 380.00 Sq.M 1050.00

82 Roller Blind work Providing and fixing Roller Blind fixed on wall for

window cover as per instruction by architect-in-charge. The Roller blind

tapestry colour & design as per instruction by architect-in-Charge with

necessary hardware fitting, material and labour etc. complete. for all

height 22.00 Sq.M 1848.30

Estimated Cost Sectoin-I (CIVIL WORKS) in Rs.

83 [1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting

torque Lift 3 phase 440 V A. C. Permanent Magnet Synchronous motor

of proper rating with high efficiency shall be used.

[2] Micro processor based / PLC, ACVVVF, vector control drive with

encoder feedback closed loop system shall be used for lift car and door

operation which shall be full collective selective operation hall call

demand response, UP/DOWN hall stops, Main, Up/ Down Contactor

with overload and phase reversal relay and safety controls.

[3] Car with M S platform with bracings of adequate size and to sustain

the impact load cabin + passenger with safety factor of fire for steel and

side panels of Stainless steel of sheet of grade 304 duty. Car ceiling will

be S.S. finishes with aesthetic appearance with LED ceiling lights. Car

flooring shall be of anti skid PVC with choice of colour of engineer in

charge. Car doors shall be of stainless steel grade 304, hairline finish with

centre opening / telescopic automatic doors. Car panel will also be S.S.

304 finished with emergency stop device, mechanical door safety device,

facility of auto/ attended mode. All car panel buttons and all floor

switches must be with brail language as per lift act.

[4] All landing doors must be fire rated for 2 hour shall be fully automatic

centre opening/ telescopic opening made of hairline finish steel grade of

304 with key holes and infrared curtains with Unlocking facility from

[5] Appropriate battery operated emergency light in the car along with

alarm switch shall be provided. Also, Emergency Light & Fan should start

immediately without any Time Delay as soon as power fails.

[6] Digital scrolling indicator system for up-down arrow along with floor

position indicator shall be provided inside the car and at all floors.

[7] Full height infra red curtain with multiple cross / crossing light beams

shall be provided.

[8] Automatic Rescue Device (ARD) shall be provided accordingly of

passenger capacity with Manual Rescue Operation ( Manual Cranking

[9] Audio visual indication in the lift car showing over loading shall be

provided such that doors kept open till excess load is removed.

[10] Spring buffers/PU Buffers shall be provided.

[11] Car fan as per passenger capacity with automatic sleep timer shall be

[12] Voice annunciator with suitable music shall be provided in lift car.

[13] Self diagnostics system for operational and safety parameters shall be

provided in control panel.

[14] Mechanical over speed governor with governor calibration as per

actual site parameters and submission of calibration certificate

submission, door key holes in the floor doors, fireman switch shall be

[15] Lift machine hoisting arrangement in the lift machine room and

monkey ladder for lift pit should be provided by the lift agency, along

with the other steel structure works, foundations for the machine etc…

[16] In the hoist way fascia plate shall be provided without any extra cost,

where ever required as / if directed by engineer in charge.

ITEM QTY PER RATE AMOUNT

[17] Permanent wiring with necessary safety devices like RCCB in all

circuit, Over Voltage Under Voltage protection and THD eliminator in

circuit for lift machine room and lift well with proper numbers of light

points, with fixtures, exhaust fan and plug points shall be provided by the

agency. Only 3 phase Power Supply shall be made available by

department in lift machine room. Necessary Earthing as per Lift

Act/Rules shall be arranged by Lift Agency.

[18] Any civil/ electrical works for additional and alteration in lift shaft

and machine room related to erection of lift shall be made by lift agency

without any extra cost. (granite/marble fixing around all landing door

openings are not in lift agency’s scope.)

[19] Agency has to provide all working drawings and documents and

liaison services for obtaining all necessary permission from lift inspector

and other authorities.

[20] acrylic transparent licence/display A4 size holder in lift car

[20A] As per statutory requirement of Govt. Of Gujarat lift & escalator

act 2000, lift agency has to provide

1. Car top safety barricade

2. Push & talk communication system.

3. Fireman's switch operation at Ground Floor.

4.carrying out third party lift inspection during/after lift erection and

provide report by third party authorized by concern licensing authority

5.agency has to provide third party insurance upto completion of free

maintenance period and submit the document for the same.

[21] Car Panel Operating Buttons with floor position indicator/buttons

must be of Auto Glow type clearly visible when view from inside cabin.

[22] For Physically Handicapped person Full Length Handrails of hairline

finish steel grade of 304 should be provided at appropriate height on the

Rear & Side Wall Panels in Lift Car. For 6 person G+2 upper floor.

Estimated Cost Sectoin-II (LIFT) in Rs.

84 Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. mm &

earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 kv grade

FRLS PVC insulated multi strand copper wires upto max length of 10 mt,

in below type of pipe erected with 6A Tissino Type ISI marked flush

type switch / bell push and accessories erected on Metal / PVC/Wooden

Box covered with 3 mm thick PC(Polycarbonate) /Acrylic/Laminated

sheet. with necessary Lamp holder/ceiling rose / H.D.Connector as

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete 100.00 Pt 420.00

85 Point wiring for independent PLUG with following size mains earth wire

of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires upto 10 mt length, in following below

of pipe erected complete with ISI marked 3 / 5 Pin socket and tissino

type switch erected with earth continuity connection erected on Metal /

PVC/Wooden box covered with 3 mm thick PC(Polycarbonate) /

Acrylic/Laminated sheet.

[A] For 6 amp plug and 6 amp switch with 2-1.5 sq. mm Cu. Mains from

near by switchboard/db board upto 6 mt. (f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling complete

ITEM QTY PER RATE AMOUNT

86 Point wiring for independent PLUG with following size mains earth wire

of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires upto 10 mt length, in following below

of pipe erected complete with ISI marked 3 / 5 Pin socket and tissino

type switch erected with earth continuity connection erected on Metal /

PVC/Wooden box covered with 3 mm thick PC(Polycarbonate) /

Acrylic/Laminated sheet.

[B] 6/16A Plug and 16 amp switch with 2-2.5 sq. mm Cu. Mains from

mcb d b boards. (f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete 20.00 Pt 577.00

87 Point wiring for independent PLUG with following size mains earth wire

of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires upto 10 mt length, in following below

of pipe erected complete with ISI marked 3 / 5 Pin socket and tissino

type switch erected with earth continuity connection erected on Metal /

PVC/Wooden box covered with 3 mm thick PC(Polycarbonate) /

Acrylic/Laminated sheet.

[C] 6/16A Plug and 16 A switch with 2-4 sq.mm Cu. Mains with

sq.mm ( green) earthing wire (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete 20.00 Pt 699.00

88 Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr length, in

following type of pipe to be erected concealed in / flushed on wall /

ceiling complete with 6A Tissino Type ISI marked accessories with earth

continuity erected on Metal/PVC//Wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet. with necessary Lamp holder/ceiling

rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete 4.00 Pt 443.00

89 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth continuity of

following type erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected. with necessary ceiling

rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete

90 Outdoor street light fitting side entry with clear acrylic /plastic /

polystyrene cover complete with starter, polyester choke copper wound

complete erected with 40/36 watt tube holders. with lead wire and

(b) with 2 tube 40 watt.120 cms. 22.00 No. 990.00

91 Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S. housing.

92 providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI

Cat.III 25.00 Each 130.00

ITEM QTY PER RATE AMOUNT

93 Providing & erecting 415 V MCB three Pole for Motor & Inductive

Load (C Curve) having 10KA breaking capacity & confirms to IS :8828

in existing box having following capacity

(a) 6 to 32 Amp.

94 Providing and erecting Approved make Ceiling fan with double ball

bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep

complete, canopy erected on existing hook or clamp with earthing. [Make

shall be approved by Engineer in charge] 20.00 No. 1865.00

95 Supplying Table fan approved make A.C. 23OV, 50 c/s. 40 cm. sweep

oscillating complete with 3 mtrs. of 3core round flexible wire and 3 pin

plug top. [ Make shall be approved by Engineer in Charge] 6.00 No. 2150.00

96 Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm O.D

4 mtr. Long duly painted with two coats of aluminium paint complete

with metallic base plate of 300 mm x 300 mm x 4mm thick for using as a

compound light pole with approx. weight 32 Kg. 22.00 No. 3768.00

97 Providing and fixing ceiling fan 48 inch diameter of ISI make company as

per EIC. 30.00 No. 2750.00

98 Providing and fixing LED fixtures 2x2 full glow panel of 20 watt as per

99 Providing and fixing LED fixtures of 10 watt as per EIC. 42.00 No. 800.00

100 Providng and fixing street light of 160 watt as per EIC. 22.00 No. 5500.00

Estimated Cost Sectoin-III (ELECTRICAL WORKS) in Rs.

Total Estimated Cost Section [ A = I +II + III ] in Rs …

Bidder's offer [B]

GRAND TOTAL [C = A +/- A*B ]

GRAND TOTAL [C = A +/- A*B ]

GST (CGST __% + SGST __%) [ D = C * GST% ]

GRAND TOTAL INCLUDING GST [ E = C + D ]

GRAND TOTAL INCLUDING GST [ E = C + D ]

Final offer in Rs.

Chief Engineer (Material)

PGVCL, Corporate Office, Rajkot