Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹6.1 Cr
EMD Value
₹6.1 L
Closing Date
8 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer, Panchayat (R&B) Division, Tapi
MMGSY 2026-27 Construction of Box Culvert in Approach Portion for High level Bridge on Degama Tichakpur Road on River Mindhola at Ch. 0/40 to 0/60 Ta:Valod Dist:Tapi
364554
23 OF 2026-27
Open
Civil Works - Bridges
Works
Tapi
6 documents required · 6 mandatory
₹12,000
Executive Engineer, Panchayat (R&B) Division, Tapi-Vyara
₹6.1 L
7 Nov 2026
7 Nov 2026
7 Nov 2026
8 Dec 2026
7 Nov 2026
90 days
BILL OF QUANTITES
Memorandum showing items of work to be carried out
Item Description of Item (with brief specification and reference
Quantity Unit figure Amount
no tobook of specifications)
1 Proving flood guage makrs on substrucure as per deisign including 13.00 Rmt 164.700
painting complete
2 Providing and laying filter media 600 mm. thick as directed at the 398.00 Sq.m 1279.970
back of outer wall & returns walls as per detailed specifications
3 Providing and filling sand behind abutments and between returns in 576.00 Cu.m 480.410
layers as directed
4 Excavation for foundaion in sand gravel, clay, soft, soils and 945.00 Cu.m 513.620
murrum etc. including soring strutting and dewatering as necessary
and dis posing off the excavaed suff as directed (A) Depth upto
5 Excavation in large boulders and soft rock by welding including 3716.00 Cu.m 719.060
sorting strutting and dewatering as necessary and disposing off the
excavated stuff as directed.
6 Excavation in hard rock by dry wet blasting and chiselling including 3870.00 Cu.m 1093.380
dewatering preparing foundation base by proper benching and
stepping and dispossing of the excavated stuff as directed. (B)
Blasting prohibited
7 Providing & filling in foundation with ordinary cement concrete M 1320.00 Cu.m 3686.029
15 mix and providing necessary vertical pin headers including
formwork vibrating ramming & curing complete.
8 Diversion of water course/providing cofferdam and bund or island 11.00 Each 50500.000
as may be necessary for foundation the same for the period as may
be necessary (B) Diversion by cofferdam/sland
9 Providing & casting in situ Design mix concrete M 30 for R. C.C. 982.00 Cu.m 4864.960
Bottom Slab, Return Wall Footing, Key etc. including necessary
shuttering laying vibrating ramming and curing complete.
10 Providing and placing in position reinforcement grade I.S.I. mark Fe- 258.64 M.T 73647.306
550D CRS (Corrsion Resistance Steel) for following items including
cutting, bending, hooking, tying etc. complete as per detailed
drawings and specifications for (A) R.C.C. footing for Bottom Slab
and Return Wall (B) Outer Wall, Inner Wall, Side Wall, Return
Wall (C) TOP slab (D) R.C.C. Crash Barrier (E) Approach slab
and Wearing Coat
11 Providing and laying weep hole in abutment and return by using 398.00 Each 87.080
A.C. pipes of 100 mm. Diameter including laying in proper grade
and joining etc. comp. As per detailed specifications.
12 Providing and casting in situ controlled cement M-30 for R.C.C. 0.000
work in Outer Wall, Inner Wall, Return Wall as per drawing
including centering shuttiring scaffolding where necessary laying
vibrating curing and finishing complete.
(A) Height from 0.0 M to 5.0 M 666.57 Cu.m 5469.590
(B) Height from 5.0 M to 10.0 M 145.41 Cu.m 5795.060
13 Providing and casting in situ controlled cement concrete M-30 for 667.00 cu.m 5598.410
R.C.C. work in Top Slab including centering, ramming vibrating
curing and finishing complete.
14 Providing and casting in situ controlled cement concrete M 40 for 74.85 Cu.m 5703.770
average 100 mm. thick wearing coat laid as directed including
tamping vibrating finishing curing and filling in joints with bitumen
15 (Provision of an Reinforced cement concrete crash barrier at the 256.40 Rmt 1657.410
edges of the road, approaches to bridge structures and medians,
constructed with M-40 grade concrete and dowel bars 25 mm dia,
450 mm long at expansion joints filled with pre-moulded asphalt
filler board, keyed to the structure on which it is built and installed
as per design given in the enclosure to MOST circular No. RW/NH -
33022/1/94-DO III dated 4 June 1994 as per dimensions in the
approved drawing and at locations directed by the Engineer, all as
16 Providing PVC. 100 mm. diameter water spouts including necessary 44.00 Each 159.370
iron gratings as per drawings.
Item Description of Item (with brief specification and reference
Quantity Unit figure Amount
no tobook of specifications)
17 Providing and fixing marble slab including engraving and painting 2.00 Each 1012.650
complete. (A) size 75 cm x 60 cm x 4 cm
18 Providing and casting in situ controlled cement concrete M 30 for 45.36 Cu.m 5403.340
approch slab including form work curing and finishing complete.
19 Providing and laying rubble for apron and Gabbion (each stone 4194.71 Cmt 1067.080
weight not less than 40 kg.) including packing and filling in the
interstices with quarry spalls.
20 Providing Designing Supplying and Installation of Extruded Bi- 983.00 Sq.m 141.400
Axial Polypropylene 40 kn GeoGrid Including all Labours & etc.
21 Earth work for embankment in cluding breaking clods dressing With 7294.30 Cu.m 173.670
all lead and lift and including watering, rolling, and consolidation of
subgrade in layers at O.MC. To required dry density including
filling the depressing which occur during the proces using vibrating
roller 8.T. to 10 T (A) From borrow area within any km.
22 Clearing and grubbing road land including uprooting trunk 0.21 Hectre 28455.140
vegetation, grass bushes, shrubs, saplings and tree girth up to
mm, removal of stumps of trees cut earlier and disposal of
unserviceable materials and stacking of serviceable materials to be
used or auctioned up to a lead of 1000 meters including removal and
disposal of top organic soil not exceeding 150 mm in thickness. (C)
by mechanical means in area of light jungle
23 Construction of granular sub-base (GSB-V) 150 mm thick layer by 309.00 Cu.m 945.360
providing machine crushed B.T. material satisfying MORT&H
specification (Fifth revision) of Grading V including spreading in
uniform layer with motor grader on prepared surface, mixing by mix
in place method with rotavator at OMC and compacting with
vibratory roller to achieve the desired density etc. complete.
24 Providing and laying wet mix macadam (WMM) base course 200 385.00 Cu.m 1106.960
mm thick in two layers as per MORTH specification using machine
crushed B.T. chips as per required gradation, mixing with required
optimum quantity of water, conveying the mix to site of work,
spreading in to grade and camber with paver/mechanical means and
consolidation each layer with vibratory roller to aschieve the desired
density including cost of material labour plant and equipment etc.
25 Providing and Laying priming coat with emulsion SS-1 grade and 1802.00 Sqm 102.920
spraying emulsion with spray set fitted on mechanical bouzer using
emulsion at the rate of 7.50 kg/10 smt on WMM surface including
cleaning the surface etc. complete
26 Providing and laying bituminous base course 37.5 mm thick 133.00 M.T 3027.340
compacted with tack coat of Emulsion grade RS1 at the rate of
Kg./10Sqmt. and using B.T. stone aggregates of required gradation
and asphalt (VG-30) grade for mixing @ 1.99 % by weight of total
mix including heating the aggregate and asphalt by drum mix plant
and spreading the same by paver finisher and consolidation with
vibratory roller including providing all materials, equipments, tools
and plants, oil, kerosene, fire wood, labour charges etc. complete
27 Providing and laying 50.00 mm thick compacted B.M. in Single 195.00 M.T 4160.140
Layer with B.T. aggregate as per MORT&H specification using
Emulsion grade RS1 for tack coat at 2.5 Kg./10Sq.mt. with
mechanical sprayer and bitumen grade VG-30 for mixing at the rate
34.0 Kg/M.T. i.e. 3.4% of total mix including heating the aggregate
and asphalt by Drum mix plant and spreading the same by paver
finisher and consolidation with vibratory roller including providing
all materials, equipments, tools and plants, oil, kerosene, fire wood,
labour charges etc. complete
28 Providing and laying 25 mm thick compacted Semi Dense 102.00 M.T 5177.160
Bituminuous Concrete using stone chips as per MORT&H
gradation & 60/70(VG-30) grade asphalt for mixing @ 5.0% by
weight of total mix for binder including heating the aggregate and
asphalt by Drum Mix Plant
Item Description of Item (with brief specification and reference
Quantity Unit figure Amount
no tobook of specifications)
29 Road marking with hot applied thermoplastic paints with 85.00 Sqm 367.730
reflectorising glass beads on bitumin surface poviding and laying a
hot applied thermoplastic compound 2.5 mm thick including
reflectrorising glass beads @250 gm per sqm area, thickness of
mm in exluding of surface applied glass beds as per IRC:35-2015.
The finished surface to be level,uniform and free from streaks and
holes zebra patta/bump pattaline/center line/cut patta.The white
colour marking should provide liminance coefficent on cement road
shall be min 130 mcd/m^2/lux and Asphalt road shall be min
mcd/m^2/lux during the service life during the day time .The
marking should meet the performance criteria for night time
rreflectivity and skid resistance as mentioned in section -15 of IRC
35-2015 , warranty for retro reflectivity shall be two years.
30 Cat Eye / Road Stud / RPM: Supplying Raised Pavement Markers 67.00 No. 217.410
made of polycarbonate and ABS moulded body and reflective panels
with Micro prismatic lens (No Glass bead lens) capable of providing
total internal reflectionof the light entering the lens face and shall
support a load of 13635 kgs. tested in accordance to ASTM D
Type H and complying to Specifications of Category A of MORTH
Circular No RW/NH/33023/10-97 Ð DO III Dt 11.06. 1997. The
height, width and length shall not exceed 20 mm, 130 mm and
mm and with minimum reflective area of 13 Sqcm on each side and
the slope to the base shall be 35 +/- 5 degree. The body of themarker
should having finger grip for easy and accurate placement and
application with epoxy / bituminous Adhesive as recommended by
the manufacturer of the marker. The color of the marker should be
as per theIRC 35-2015 and as directed by Engineer-in-charge.
31 Direction sign (Junction board):-Providing and fixing sing boards 1.00 No. 14831.710
made out of 2mm aluminium sheet; size 244 x 122cms. rectangle as
as per the design of IRC-67-1977 pre treated with phospheting
process & acid etching; coated with one coat of epoxy primer and
two coats of best quality epoxy paint; reflectorised with retro
refiective sheeting as per latest M.O.S.T. Specifications; Letters and
numerals should be as per IRC-30-1968, 3.1m long (2 nos) stand
post and frame fabricated from suitable size ironangle of 50 x 50 x
5mm 75x75x6mm as required; painted with best quality epoxy
coatings in black and white bends. the details of symbol or
inscription / numerals for each board shall be as per the instruction
of engineer in charge. The fixing at site shall be in 1:2:4 CC block
of size 45 x 45 x 60cms. for each leg. including excavation curing
etc. complete under the supervision of engineer in charge.(A)
Engineer Grade(VR)...
32 Cautionary Warning Sign :-Providing and fixing sing boards made 1.00 No. 3808.660
out of 2mm aluminium sheet; size 90 x 90 x 90 cms. equilateral
triangle as per design of IRC-67-1977. Pre treated with phospheting
process & acid etching; coated with one coat of epoxy primer and
two coats of best quality epoxy paint reflectorised with retro
refiectivesheeting as per latest .O.S.T.Specifications; 3.1m long
stand postand frame fabricated from suitable sizeiron angle of 35 x
35 x 3mm, 75 x 75 x 6mm as required; painted with estquality
epoxy coatings in black andwhite bends. The details of symbol
foreach board shall be as per theinstruction of engineer in charge.
The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x
Cms. for each leg.including excavation, curing etc.complete under
the supervision of engineer in charge.(A) ngineer Grade(VR)
Item Description of Item (with brief specification and reference
Quantity Unit figure Amount
no tobook of specifications)
33 Informatory Signs :-Providing and fixing sing boards made out of 1.00 NO 3856.900
2mm aluminium sheet; size 80 x 60cms. rectangle as per the design
of IRC-67-1977 pre treated with phospheting process & acid
teching; coated with one coat of epoxyprimer and two coats of best
qualityepoxy paint; reflectorised with retro refiective sheeting as per
latest M.O.S.T. Specifications; 3.1m long stand postand frame
fabricated from suitable sizeiron angle of 35 x 35 x
3mm75x75x6mm as required; painted with best qualityepoxy
coatings in black and whitebends. the details of symbol for
eachboard shall details of symbol for eachboard shall be as per the
instruction ofengineer in charge. The fixing at site shall be in 1:2:4
CC block of size 45 x45 x 60cms. for each leg. including excavation
curing tec. complete under the supervision of engineer in charge.(A)
Engineer Grade(VR)...
34 Hazard Marker Sign :-Providing and fixing sing boards made out of 1.00 No. 2423.740
2mm aluminium sheet; size 90 x 30cms. rectangle as as per the
design/drawing attached (IRC) pretreated with phospheting process
& acid etching; coated with one coat of epoxy primer and two coats
of best quality epoxy paint; reflectorised with retro refiective
sheeting as per latest M.O.S.T. specifications; 3.1m long stand post
and frame fabricated from suitable size iron angle of 35 x 35 x 3mm
& 50 x 50 x 5mm painted with best quality epoxy coatings The
fixing at site shall be in 1:2:4 CC block of size 45x45x 60cms. for
each leg. including excavation curing etc. complete under the
supervision of engineer in charge.(A) Engineer Grade(VR)...
35 Providing and fixing hectometer as per I.R.C. type design including 2.00 NO 356.500
painting lettering etc. complete fixing in C.C. 1:5:10.
36 Providing and fixing guard stone as per I.R.C. type design including 20.00 NO 350.810
white washing etc. complete fixing in C.C. 1:5:10
37 Excavation for foundation up to 1.50 mt depth including sorting out 775.00 Cum 254.360
and stacking of useful material and disposing of the excavated stuff
up to 50 mt. lead (B) Dense or Hard soil
38 Providing & Suppling of Mechanically Woven, Double 2247.00 Cu.m 1338.250
Twisted,Hexagonal wire mesh Zinc+ PVC Coated Gabion boxes;
Mesh opening Type : 10 x 12; Wire dia: 2.7/3.7 mm; Selvedge wire
39 Providing, Supply and Installation of 200 GSM Non Woven 1284.00 Sqm 45.450
Geotextile Needle Punched. Polypropylene Material Having
Minimum Roll Size of 5 mtr x 100 mtr Including all Labours & etc.
40 Providing and laying rubble pitching of 22.50 cm. thick with filling 2236.00 Sqm 637.740
the sand in the interstices & C.C. 1:3:6 panelling at 3.0 mt. C/C and
30 cms. x 30 cms. panel wall as per the detailed drawing with
necessary excavation and providing water chute of C.C. 1:3:6 at
24.00 mt. C/C providing pointing on rubble pitching in CM 1 :
41 Providing Designing Supplying and Installation of Extruded Bi- 1469.00 Sqm 111.100
Axial Polypropylene 30 kn GeoGrid Including all Labours & etc.
42 Supplying and fixing reinforced concrete heavy duty non-pressure 100.00 Rmt 3469.260
pipes with collars for culvert carrying heavy traffic as per IS: 458-
1991 spcifications including setting the pipes in C:M 1:2 watering
and laying (to leval or slopes) of class NP3 of following internal
Diameters 1200 mm Dia.
Rupees Six Crore Five Lakh Ninethy Seven Thousand Four hundred seventhy six and Paise Total
I/We am/are willing to carry out the work at ............ % above/below percent (Should be written in figures and words) of the estimated rate
mentioned above. Amount of my /our tender works out as under.
Amount of My / our Tender Work out as under.
* Estimated amount put to tender.RS.6,05,97,476.15 Estimated amount put to tender.RS.6,05,97,476.15
Item Description of Item (with brief specification and reference
Quantity Unit figure Amount
no tobook of specifications)
(* Please strike out whichever is not applicable.)
The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no
extra payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 GST and Income tax TDS will be deducted at a source while making payments of bills.
4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.
5 All works shall be carried out as per latest MORTH Specification Booklet and other specification of Division as directed.
Testing of material shall be done as per statement attached with specification. The material should be tested in GERI or Private laboratory
approved by Govt. of Gujarat. Bill for testing charges should be paid by Executive Engineer and 1% amount as per the schedule - B
computed after deducting the cost of materials to be supplied by the Govt. and shall be recovered from the contractor's running bill as per
Govt., R&B Department No. TNC-1085/(4)/C dtd 20-12-91.
Sign Of Bidder Deputy Executive Engineer, Executive Engineer
Pan (R & B) Sub Division Pan(R & B ) Division
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1_SBD Book_Dehgama Bridge.pdf
2.Specifications Index.pdf
3.General Techical Specifications_Dehgama Bridge.pdf
4_BOQ_DEHGAMA BOX CULVERT.pdf
5.DRAWING.pdf
6.TESTING SCHEDULE.pdf
7_final GAD DEGAMA TICHAKPURA 06-10-2026-24X64.pdf
GR all SBd with Index-1.pdf
GR all SBd with Index-2.pdf
GR all SBd with Index-3.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .