SPECIAL REPAIR TO BUILDING No P-183 AND P-184 AND PROV OF IRON CAGING OVER OVERHEAD WATER TANKS OF SMQs (PHASE-III) TO PREVENT MONKEY MENANCE AT AF STN MT ABU UNDER AGE B R-1 GE (AF) NO 2 JODHPUR

Amount

Dismantling floor, hearth or wall tiling or stone flooring including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge

M&L for coloured printed non skid tiles area of each tile exceeding exc 0.18 sqm but n.exc 0.38 sqm in floors etc set and jointed with neat cement slurry pointed with colour cement to match the floor, and including 15 mm thick screed bed cement mortar in CM 1:4 and including the chipping of the existing PCC floor complete all as specified Engr in Charge.

M&L for digital design glazed ceramic tiles in vertical surface of size of each tile 350 x 250 mm /450 x 350 mm and 7 to 8 mm thick fixed to wall with 10 mm thik cement sand mortar in CM 1: 4 , set and joint in neat cement slurry and pointed in white or coloured cement to match the same complete all as specified and directed Engr in Charge.

M&L PCC 1:2:4 type B-1 using 20mm graded stone agg 40 mm thick all as specified and directed by Engr in Charge.

Dismantling of stone slabs & tiles of any description or thickness (except ceramic tiles) in floors, aprons etc laid bedded & pointed in any mortar complete all as specified and directed by Engr in Charge.

M&L for machine cut kota stone slab flooring in steps and floor ( 1.2 to 1.5 m length) 20-25mm also in riser thick laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing, moulding on edge and polishing over and including 20mm thick screed bed in CM 1:4 and including the chipping of the existing PCC floor complete all as directed by Engineer-in-Charge.

Rounding to edges of stone slabs one edge such as in steps cooking platform and other similar work all as directed by Engr-in-charge

M & L for Rubber moulded Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick set , jointed and pointed in neat cement slurry in floors with gray cement and pigment with screed bed 15 mm CM 1:6 complete all as specified by Engr- in- Charge

M&L 75 mm thick PCC 1:4:8 type D-2 (using 40mm grade stone aggregate) as in Sub floors,Sub bases ,flooring etc all as directed by Engr-in-charge

M&L cement concrete 75 mm thick type C-2 1:3:6 ( 40 mm graded agg ) as in plinth protection etc all as directed by Engr in charge .

Taking down chowkhat or frames with shutters(without taking off shutters from the frame) n.exc.1.5 Sqm each all as specified Engr in Charge

S & F anodised aluminium anodised powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed Engr in Charge

S&F Aluminium anodised powder coated window shutter, fixed type without sash bar, alumn section section weighing 0.55 kg per mtr incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specifed and directed Engr in Charge

S & F for 5.5mm thick tinted sheet glass and glazing exc 0.5 sqm in each pane with fixed in aluminium aluminium door, window and ventilator etc, of any size as per site requirement complete all specified and as directed Engr in Charge. Note :- The cost of aluminium bedding & rubber gasket shall be deemed to be included under repective itmes of aluminium door, window and ventilator here-in-before.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 and fixed with stainless steel wire staples complete all as directed by Engr-in-charge.

S&F powder coated aluminium anodized grill of 6/7 mm dia rod square, rectangular, circular or similar type of shape, fixed with channel 38 mm x 12 mm x 1.30 mm (Sec No 8778) all as specified Engr in Charge. Make :- DECOREL.

Taking down chowkats or frame exc. 1.50 sqm and not exceeding 4 Sqm each with shutters (with out taking off shutter from the frame) and removing from the site

Taking down shutters of any discription exc 1.0 sqm but n. exc 2.0 sqm and including hardware/iron mongery complete all as specified and directed Engr in Charge.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube Supplying & Fixing in opening as per specification and drawing,incl making good (such as rendering and white wash matching to exixting surface) to the existing surfaces complete all as specified and directed Engr in Charge

S&F factory made soild panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing shown on page -156 of MES SSR Pt-II complete all as specified and directed Engr in Charge.

S&F 30mm thick glazed and skelten shutter open rebated and prerepair to receive glass, gauge etc with sash bars, edge of framing, plain/chamfered or rounded, fitted with cut and metered beads with second class hard wood complete all as specified and as directed Engr in Charge.

M & L for preparation of new or previsously untreated wood or wood based surfaces of any description, not otherwise described over 10 cm width or girth and two coat of sythetic enamel paint over a coat pink of primer complete all as specified and directed Engr in Charge.

S&F MS barrel tower bolts stove enameled black with bright bolt – 150mm long fixed complete all as specified and directed Engr in Charge.

S&F MS sliding door bolt plate type, stove enameled black with bright bolt not less than 12mm dia with and incl. a minimum of 6 bolts and nuts,four on bolt plate and 2 on staple plate – 300 mm long complete all as specified and directed Engr in Charge.

S&F MS pressed handles oval type stove enameled black fixed – 125mm size complete all as specified and directed Engr in Charge

S & F 100mm stainless steel butt hinges medium weight all as specified and directed Engr in Charge

S&F 150 mm aluminium anodised handles cast type complete all as specified and directed Engr in Charge

S/F Aluminium alloy, anodised, sliding door bolt 250 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed Engr in Charge.

S&F in repair 500 ltr capacity rotational moulded polyethylene water storage tanks with thread type cover (cylinderical, vertical with closed top) tripple layer, hoisted and fixed in position including 20 mm bore brass valve high pressure with polythene float and flynut all as specified and directed by Engr-in-Charge.

S/F in repairs 15 mm bore bib taps chromium plated cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed by Engr-in-Charge.

S&F as in repair 15 mm bore fancy type pillar taps cast copper alloy capaston head chromium plated, screwed down high pressure with or without lettered “ HOT” or “ COLD” with long screwed shanks and fly nuts screwed for iron pipes fixed as in repair complete all as specified and directed by Engineer-in-Charge ,

S&F Stainless steel chromium plated 25 mm dia 1mm thick with pairs of fixing with designed brackets, stops, rollers etc all as specified Engr in Charge.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete,conforming to Fe 410-W (Gde -E-250)quality -A drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings all as directed by Engr-in-charge.

Preparing new steel surfaces of any discription exc 10 cm in width and applying two coats of synthetic enamel paint over a coat of red oxide primer all as directed by Engr-in-charge

Taking down cement plaster on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc all as directed by Engr-in-charge

M&L 15mm thick rendering in cm 1:6 on fair surfaces of walls finished even and smooth w/o using extra cement all as directed by Engr-in-charge

M&L 15mm thick rendering on stone masonry / brick surface in cm 1:4 including mixing of water proofing compoud to finished even and fair including mixing of water proofing compoud all as directed by Engr-in-charge. Note: water proofing compound should be measered separately

Supply only integral water proofing compound( ISI marked)

M&L for two coats of oil bound distemper on new plastered surfaces of walls all as specified all as directed by Engr-in-charge

M&L for two coats of cement base paint on new plastered surfaces of walls over a coat of alkali resistant priming paint all as specified all as directed by Engr-in-charge

M&L for complete removal of existing treatment by washing, rubbing down and stopping of distempered and painting surfaces etc and applying two coats of oil bound distemper all as specified all as directed by Engr-in-charge

M&L for preparation of old previously decorated surfaces by brooming down or steel wire brushes, scrapping down smoke soot, moulds, efflorescent salts etc and applying one coat of white wash on on ceiling all as specified all as directed by Engr-in-charge

M&L for complete removal of existing treatment by washing, rubbing down and stopping of distempered and painting surfaces etc and applying two coat of cement base paint on walls over a coat of alkali resistant priming paint all as specified all as directed by Engr-in-charge

M&L for applying 3mm thick wall care putty on wall, deep scraped surfaces or undulated surfaces in patches and making good even and smooth rubbing with sand paper etc all as directed by Engr-in-charge

Dismantling wrought iron or mild steel/Cost Iron work of any description not otherwise provided for all as specified and directed by Engr-in-Charge.

S&F 75mm bore cast iron sand cast soil waste and vent pipe in any length with or without ears fixed to walls with lead joints (Lead joints measured separately) complete all as specified and directed by Engineer in charge.

S&F 75mm bore CI bends, Diminishing pieces or tapers fixed with lead joints (lead joints measured separately all as directed by Engr-in-charge

S&F 300mm Mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete all as directed by Engr-in-charge

Dismantling boarding, any description fixed in any position with screws all as directed by Engr-in-charge.

M&L 18/19 mm thick block boards interior grade 2 Quality interior grade veneered on both sides,commercial type, fixed with screws to timber frame work all as directed by Engr-in-charge

S&F Continuous (piano) hinges 30 mm wide flap, mild steel, bright finish or electrogalvanised all as directed by Engr-in-charge

S&F 30mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished all as directed by Engr-in-charge.

M&L for 2nd class hard wood scantling clean sawn timber fixed for purlins, posts rafters etc, in any position (unframed work) complete all as specified and all as directed by Engr-in-charge.

M&L for beads exc 3mm but n exc 75mm girth on soft wood all as directed by Engr-in-charge

M&L for ball catches with 8mm dia steel ball and brass body and striking plate incl letting in and fixed all as directed by Engr-in-charge

M&L for hasp and staple of size 75mm safety type of aluminium anodised incl bolt to hinge plate and fixed with screws all as directed by Engr-in-charge.

M&L PCC 1:3:6 type C 2 (40mm graded agg) as in fdn filling and mass concrete all as directed by Engr-in-charge.

S&F Framed brackets of angles or tees and MS Flats, Base plates with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles and fixed to roof with fastners, as necessary, gusset plates, rivetting, hinges including with locking arrangements etc., n exc 10 kg each brackets, conforming to Fe 410-0 or Fe 310-0 (Brackets over 10kg each to be measured under `Structural Steel') all as directed by Engr-in-charge

Haritwal traders

Choudhary Traders and Engineers