Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.4 LAccepted-AOC 61 2 JAURASI LANDHAURA HARIDWAR 247664 UK | HARIDWAR | UTTARAKHAND | 247664 | L1 | Accepted-AOC Being 1st lowest | |
| 2 | L2₹36.8 L+₹2.0 L (5.82%)Rejected-Finance | L2 | Rejected-Finance Being 2nd lowest | |
| 3 | L3₹37.4 L+₹2.6 L (7.42%)Rejected-Finance 31 SARASWATI SONI MARG DEHRADUN | DEHRADUN | L3 | Rejected-Finance Being 3rd lowest | |
| 4 | L4₹38.5 L+₹3.8 L (10.8%)Rejected-Finance | L4 | Rejected-Finance Being 4th lowest | |
| 5 | L5₹39.4 L+₹4.6 L (13.3%)Rejected-Finance | L5 | Rejected-Finance Being 5th lowest |
Tender Value
₹41 L
EMD Value
₹82,000
Closing Date
24 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Clement Town
GE Clement Town MES Dehradun
PROVN OF GUARD ROOM WITH TOILET AND BATHROOM AT GKRC NEAR KSP-III (FOR GKRC AND KSP GD) AT 514 ASC BN AND ADDN/ ALTN TO BLDG NO. CAMP 21/2 BK-32 AT CLEMENT TOWN, DEHRADUN
2022_MES_526653_2
GE/CLT/ Of 2022-23
Open Tender
Civil Works
Item Rate
270 days
GE Clement Town
Class D Cat a(i)
7 documents required · 7 mandatory
₹500
Yes
GE Clement Town
₹82,000
Yes
7 Nov 2022
27 Aug 2022
26 Sept 2022
27 Aug 2022
24 Sept 2022
10 Sept 2022
Amount
Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out any type of soil complete all as specified and as directed.
Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth, for foundation, etc or for shafts, wells, cesspits, manholes, pier holes or laying of cable, taking out cable etc n exc10 sqm on plan and n exc 1.5m in depth and getting out any type of soil complete all as specified and as directed.
M&L PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate)as in foundation , filling and mass concrete complete all as specified and as directed.
M & L brick work with sub class 'B' old size bricks straight or curved on plan exc.6m mean radius built in cm (1:6) complete all as specified and as directed.
M&L half brick thick brick work with sub class "B" bricks straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and as directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm inany type of soil complete all as specified and as directed.
Removing excavated material n. exc 50m & depositing where directed at a level n.exc.1.5m above the starting point complete all as specified and as directed.
M&L for sand filling under floors or in foundations including watering and consolidation in layers n.exc 25 cm thick under floor complete complete all as specified and as directed.
M & L PCC (1:2:4), type B-0 (using 12.50mm graded crushed stone aggregate) 40 mm thick in Damp Proof Course to horizontal or vertical surfaces including necessary formwork with using WPC @2% by weight of cement and overlaying polythelene sheet 300 micron pasted over concrete surface over a coat of hot blown bitumen @ 1.20 kg Sqm complete complete all as specified and as directed. (Note:- WPC shall be measured and paid separately under respective item as "Supply only".)
Supply only integral waterproofing compound (Liquid) complete all as specified and as directed.
M & L for providing reinforced cement concrete M- 25 (Design Mix), using 20 mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
M & L for providing reinforced cement concrete M- 25 (Design Mix), using 20 mm graded crushed stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and as directed.
M & L for providing reinforced cement concrete M- 25 (Design Mix), using 20 mm graded crushed stone aggregate as in lintels complete all as specified and as directed.
M & L for providing reinforced cement concrete M- 25 (Design Mix), using 20 mm graded crushed stone aggregate as in chajjas complete all as specified and as directed.
M & L for providing reinforced cement concrete M- 25 (Design Mix ) using 20 mm graded stone aggregate as in slab, etc complete all as specified and as directed.
M & L TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M & L TMT bars 5mm dia and over upto and including 10mm dia in strupps spacers and bending cut to length, bent to shape required including cranking, bending and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M & L for use and waste of form work to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beam and similar works in rough finished flat surface of concrete complete all as specified and as directed.
M & L for use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface, square or rectangular of concrete complete all as specified and as directed.
M & L for use and waste of formwork to sides and soffits of floor, lintels band & beams including supports, overhangs, etc. with rough finished surface of concrete complete all as specified and as directed.
M & L for use and waste of formwork to chajjas including edges with rough finished surface of concrete complete all as specified and as directed.
Use and waste for form work to soffits of suspended concrete slabs and similar work n. Exc 200mm thick for fair finished concrete surface flat surface complete all as specified and as directed.
M & L for 12 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 15 mm thick in CM (1:4) on other than fair faces of brick or concrete surfaces finishing even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of newly plastered surface of wall and applying two coats of acrylic distemper over a coat of wall care putty on walls complete all as specified and as directed.
M & L for preparing newly plastered or previously untreated wall surfaces and applying two coats of exterior acrylic emulsion over one coat of wall care putty on walls complete all as specified and as directed.
M & L for preparing newly plastered or previously untreated wall surfaces and applying two coats of exterior acrylic emulsion over one coat of primer on walls complete all as specified and as directed.
M&L for prepration of new plastered surface and applying three coats of white wash on ceiling complete all as specified and as directed.
M&L for preparation of newly plastered surface of wall and applying three coats of white wash on walls complete all as specified and as directed.
M & L broken stone or boulder hardcore of gauge n exc. 63 mm, deposited, spread and leveled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
M & L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded crushed stone aggregate as in plinth protection and path etc. finished even and fair without using extra cement complete all as specified and as directed.
Forming construction joint 30mm deep x 10mm wide filled with sealing compound grade ‘A’ complete all as specified and as directed.
M&L for 75mm thick cement concrete (1:4:8) type D-2 (Using 40mm graded crushed stone aggregate) as in sub-base complete all as specified and as directed.
M & L 100mm thick PCC (1:4:8) type D-2 (40mm graded crushed stone aggregate) in sub base complete all as specified and as directed.
M&L for coloured Glazed ceramic tiles in vertical surfaces 450 x 350x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over and including 10mm thick rendering or bedding layer of cement mortar (1:4) complete all as specified and as directed.
M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.11 Sqm but n. exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:4) including 25mm thick cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in floor finished rough to receive floor/screed complete all as specified and as directed.
M & L for machine cut Kota stone slab 18-20 mm thick as in floor/ treads of steps laid over and including 15 mm thick screed in cement mortar (1:4), set & jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing and to achieve mirror polishing complete all as specified and as directed.
M & L for machine cut Kota stone slab 18-20 mm thick as in risers to steps, skiting/dado, pillars, window cills and the like, laid over and including 15 mm thick rendering in cement mortar (1:4), set & jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and as directed.
S&F 15mm dia brass chromium plated Bib tap fancy type with wall flange complete all as specified and as directed.
S&F in repair 15mm dia brass chromium plated Bib tap fancy type with wall flange complete all as specified and as directed.
S&F 15mm dia brass chromium plated pillar tap with fly nut capstan head screwed for 15mm bore dia of pipe complete all as specified and as directed.
S&F in repair 15mm dia brass chromium plated pillar tap with fly nut capstan head screwed for 15mm bore dia of pipe complete all as specified and as directed.
S&F 15mm bore dia fancy type, chromium plated angle valves, cast copper alloy,screwed down,high pressure, with crutch , screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F 15mm bore dia stop valve fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy,screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repair 15mm bore dia stop valve fancy type, chromium plated with cast copper alloy,screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F chromium plated brass shower rose 125mm size with swivel joint and shower arm complete all as specified and as directed.
S&F in repair chromium plated brass shower rose 125mm size with swivel joint and shower arm complete all as specified and as directed.
S&Fvitreous china white wash hand basin flat back with pedestal type of size 550x400mm including CI/MS brackets including cutting for and pinning in brackets but including waste pipe complete all as specified and as directed.
S&F vitreous china water closet Orissa pattern of size 580 X440mm white ISI marked with cast iron 'P' or 'S' trap including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified and as directed.
S&F PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and as directed.
S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and as directed.
S&F Cast iron cowl 50mm complete all as specified and as directed.
S&F 100mm bore cast iron bends or tee (any radius ), diminishing pieces or tapers fitted with oval acceess doors complete all as specified and as directed.
S&F cast iron floor trap with grating including jointing waste pipe in run lead 75mm dia fixed in cement concrete type B-1(1:2:4) and SS gratings complete all as specified and as directed.
M&L for 50mm dia cast iron soil waste pipe & vent pipe of any length with or without ears with cement joints fixed to walls or laid in trenches complete all as specified and as directed.
S & F rotational moulded double layered ISI marked PVC water storage tank cylinderical, verticle with closed top hoisted and fixed in position tank capacity 1000 Ltr with and including PTMT float valve 20 mm dia & making connection for inlet and outlet complete all as specified and as directed.
S&F gun metal globe gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe etc complete all as specified and as directed.
S/F solid PVC door frames of size 50 mm x 47 mm made out of 5mm prelam colour PVC sheet reinforced with MS tube square tube complete as per manufacturer’s specification and drawing and as directed.
S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, Mild steel frame shall be covered with heat moulded prelam coloured PVC ‘C’ channel having a PVC sheet strip of 30mm with steel inside with solvent cement for stiles and plain colour PVC sheet for top rails, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, fixing in the frame at site as per specification, drawing and as directed.
M & L for galvanised Mild Steel wire cloth for 0.56 mm nominal dia of wire & average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staples etc complete all as specified and as directed.
M&L solid (125 mm X 63 mm double rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (Single extruded process) material with density 780 kg/ Cum & manufactured by an ISO : 9001-2015 certified company, all as per specification drawings as directed by the Engr-in-Charge. The door frame should be water proof , termite proof, fire retardant and having excellent screw holding capacity complete complete all as specified and as directed.
M&L 30mm thick moulded plain WPC solid door shutter providing (30mm thick) MOLDED WPC Brown factory made 100% solid door (confirming as per IS : 4020) made from 100% LEAD FREE single extruded with 2, 4 or 6 raised panel design on the front side with 10mm deep moulded on single side with wood grain texture and back side pain with density not less than 600kg/cum. Manufactured by an ISO : 9001-2005 certified company. The door should be water proof , termite proof, fire retardant and having excellent screw holding capacity complete complete all as specified and as directed.
S&F 30 mm thick 2nd class hard wood factory made glazed and skelton shutter, open rebated and prepaned to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters complete all as specified and as directed.
M&L for applying two coats of synthetic enamel paint to new undecorated wooden surfaces over a coat of pink primer including preparation, over 10cm width or girth complete all as specified and as directed.
S & F 100 mm size butt hinges of medium weight cold rolled mild steel complete all as specified and as directed.
S & F 100 mm size butt hinges of medium weight cold rolled stainless steel complete all as specified and as directed.
S & F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet complete all as specified and as directed.
S & F 200 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.
Dismantling asbestos cement (corrugated, semicorrugated etc) sheets in roof coverings complete all as specified and as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa and 150AZ as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa and 150AZ as in roof covering/cladding to wall, ridge etc fixed with self tapping screws complete all as specified and as directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.
M&L for Non Skid coloured ceramic tiles 8-9mm thick grade-4 (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm (600x600mm) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) complete all as specified and as directed.
M&L for Non Skid coloured ceramic tiles 8-9mm thick grade-4 (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm (600x600mm) as in vertical surface such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) to recieve tiles complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and as directed.
M&L for white marble 18 to 20mm thick (table rubbed and polished) in floor, steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
M&L for RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in slab and shelves supported on walls complete all as specified and as directed.
M&L pre-polished Baroda green marble 14 -16 mm thick (table rubbed and polished) in step, jambs, pillars , window cills, cooking plateforms and the like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble including half round moulding and making hole for gas pipe over 15mm thick screed bed in CM (1:6) complete all as specified and as directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.
S&F mild steel bands, straps, support or stays for rainwater, ventilating pipes including bolts, if required hooks (stay) heavy for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles confirming to Fe-290 Gde-E-165 complete all as specified and as directed.
M&L PCC type C-1 (1:3:6) (using 20mm grade broken stone aggregate) in hold fast blocks/ filling of prssed steel framing complete all as specified and as directed.
M&L for GI snap grid framework including 4mm thick E-boards (non-asbestos) for false ceiling (grid size 605mm x 605mm ) including necessary notching and preparing holes and hangers 2mm dia GI adjusting level fixed to structural members. Galvanised steel section of exposes T section grid with exposed flange faces duly powder coated white/ivory colour. The suspension system consisting of perimeter wall angle of size 20x20x0.45mm of GS sheet to secured on wall/partition face with the help of rawl plug screws @450mm c/c. Universal T shaped main runner with single rotatary stiching of size 35x24mm made from 0.33mm thick GS sheet of length 3.60m to be spaced @1200mm c/c. Cross T shaped runner of size 25x24mm with double thick GS sheet 0.25mm thick spaced @ 600mm c/c. To form 600x600mm size module, intermediate T shaped cross runner of size 25x24mm made from 0.25mm thick GS sheet of length 600mm is placed inside the module of size 1200x600mm including suspension of the ceiling frame from structural members with 2mm thick GI wire and level adjusters all cut out etc to the required line and shape as per manufacturer recommendations complete all as specified and directed.
Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.
M&L for 15mm thick plaster in CM (1:6) on fair face of brick walls finished even and smooth without using extra cement complete all as specified and as directed.
M&L for applying two coat of internal acrylic distemper of approved tint over a coat of wall care putty on walls after complete removal of existing treatment and preparation of old plastered surface by rubbing down, washing complete all as specified and as directed.
M&L for applying two coats of weather proof exterior emulsion paint after complete removal of existing treatment including preparation of old plastered/concrete surfaces over a coat of wall care putty on wall complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of wall and apply two coats internal acrylic distemper including a coat of primer of approved tint over a coat of wall care putty complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size exc 1.5 Sqm and n.exc 4 Sqm complete all as specified and as directed.
Taking down chowkhats or frames area n. exc 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.
S&F window/ventilator prepainted section of frame 72x55mm fixed to wall or concrete surface with rawl plugs made of galvanised steel powder coated and section of shutter 47x20mm, mulion section 72x50mm (Base steel as per IS 513 "D" quality galvanized as per IS 277 with zinc of 120 gms/Sqm) glazed and wire gauge shutter prepared to receive wiremesh to the shutter (Double door shutter) with total coated thickness of 0.6mm including grills/guard bars made made of 10mm square bars powder coated fixed to window frame with screws at 150mm c/c both ways, 4 mm thick sheet glass, 0.36mm stainless steel wire cloth i.e. 1.4mm aperture and necessary fittings and all builders hardware such as handles, tower bolts & stays etc complete all as specified and as directed.
S&F compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc built up from tow or more beam or channel sections or angles with plates including all lattice bars, stiffeners, gusset plates conforming to Fe410-W (Gde-E-250) quality-A complete all as specified and as directed.
S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe410-W (Gde-E-250) quality-A complete all as specified and as directed.
S&F MS work as in doors or gates, windows, ventilators of angle/rectangular or square hollow section or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering doors, windows, ventilators etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, window, ventilator fittings and hanging, also fastening and fixing conforming to Fe 410-W (Gde-E-250) quality 'A' complete all as specified and as directed.
S&F mild steel plain black sheet 1mm thick covering to door shutters complete all as specified and as directed.
S&F in repair double layer ISI marked rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 500 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet complete all as specified and as directed.
M&L for preparing new steel and iron surfaces of any description over 10 cm width /girth and applying two coats of synthetic enamel paint of any tint over one coat of red oxide primer complete all as specified and as directed.
Excavation in post hole (or similar holes) each n. exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface in any type of soil complete all as specified and as directed.
M&L for PCC (1:3:6) type C1 (Using 20mm graded crushed stone agrregate) as in foundation of posts, railing and similar work complete all as specified and as directed.
S&F 250mm stainless steel sliding door bolts, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.
S&F 200mm long stainless steel barrel tower bolts complete all as specified and as directed.
S&F 150mm size stainless steel handles complete all as specified and as directed.
S&F 150mm aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.
S&F 150mm size aluminium alloy handles, cast type, anodised complete all as specified and as directed.
S&F mild steel 160mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
M&L 100mm dia cast iron soil, waste and vent pipe pipes any length with or without ears with cement joints fixed to walls or laid in trenches complete all as specified and as directed.
M&L 75mm dia cast iron soil, waste and vent pipe spun pipes any length with or without ears with cement joints fixed to walls or laid in trenches complete all as specified and as directed.
M&L cast iron floor trap with grating including jointing waste pipe in runlead 75mm dia fixed in cement concrete (1:2:4) type B-1 (using 20mm graded aggregate) complete all as specified and as directed.
S&F 75mm bore cast iron bends or diminishing pieces (any radius) with duck's foot or heal rest complete all as specified and as directed.
S&F Cast iron cowls 75mm complete all as specified and as directed.
S&F in repair of sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm and bowl size 410mm x 330mm x160mm complete all as specified and as directed.
S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified and as directed.
S&F in repair 32 mm dia PVC flush pipe of polyethylene of low or high density for WHB, sink, urinal complete all as specified and as directed.
S&F in repair 20 mm dia brass CP tubular towel rail D type 600mm long complete all as specified and as directed.
Taking up or down 15mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and as directed.
S&F 15 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete all as specified and as directed.
S&F in repair 15mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified and as directed.
Taking up or down 20mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and as directed.
S&F 20 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete all as specified and as directed.
S&F in repair of 20mm dia SS drapery rod, fancy type, SS knobs and brackets, fixed in any length complete all as specified and as directed.
M&L for 75mm thick PCC (1:4:8) type D2 (Using 40mm graded crushed stone aggregate) as in path finish the top surfaces even and rough to receive top layer complete all as specified and as directed.
M&L for rubber moulded coloured glossy finish cement concrete chequered tiles of size 30cm X 30cm X 20mm thick jointed in neat cement slurry and pointed in white or coloured cement and pigment to match the surface of tile as in floor over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.
M&L for PCC (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) as in coping, edging including necessary form work complete all as specified and as directed.
M&L for plain cement concrete (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in surface channel or drain or benching in manhole complete all as specified and as directed.
M&L extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitered/stopped ends etc complete all as specified and as directed.
S&F in repair 18 mm thick with min density 600 Kg/Cum LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and as directed.
S&F 150mm Hasp and staple stainless steel, including bolt to hinge plate and fixed with screws complete all as specified and as directed.
S&F auto closing hinges 35mm of 0 crank ( KH-001) or 8 crank (KH-002) openable at 110 degree for cupboard/kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and as directed.
M&L 150mm thick hardcore (broken stone or boulders) of guage exc 63mm but n exc 100mm, deposited spread and levelled in layers n exc 15cm thick (consolidated thickness) watered and rolled rammed to a true surface complete all as specified and as directed.
S& F coloured precast concrete interlocking paver block any shape and size vibro compaction conforming to IS15658-2006 of 60 mm thickness, M-35 grade including 25mm sand filling below the interlocking paver blocks and similar locations incl watering and consolidation complete all as specified and as directed.
M & L for Cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in kerbs etc complete all as specified and as directed.
S&F 150mm internal dia of pipe salt glazed stoneware drain pipes grade 'A', laid in trenches and jointed in CM (1:1) complete all as specified and as directed.
M&L for concrete bed in PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and as directed.
M&L for PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in coping including necessary form work complete all as specified and as directed.
M&L for PCC (1:2:4) type B2 (using 40mm graded stone aggregate) as in surface channels and drains complete all as specified and as directed.
M&L for reinforced precast cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary form work, set in CM (1:4) complete all as specified and as directed. (Note : Reinforcement shall be measured and paid for separately)
M&L for mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L construction of septic tank 10 users : consist of excavation in any type of soil returning filling, removal of surplus soil, foundation lean concrete in PCC (1:4:8), floor/ bed in PCC (1:2:4) type B-1, all RCC work M - 25 design mix, brick work in CM (1:4), reinforcement, bed and side wall plaster 20mm thick in CM (1:3) mixed with WPC @ 2% by weight cement, external plaster 15cm thick in cm (1:4), cast iron rung, inlet and outlet pipes 150mm dia, PVC vent pipe 75mm bore with PVC cowl, rest all shown in drg, specified in PS and all as directed. (Refer drg No. CBBZ, TD/217, sheet 3/7).
M&L construction of soakage well of 1.2m dia X 3.00m deep consisting in excavation in any type of soil, returning filling, removal of surplus soil, foundation lean concrete PCC, honey combing/ solid wall, M-25 design mix . Brick work in CM, RCC cover slab, filling with brick bats complete all as shown in drg and as specified in PS complete all as directed (Refer drg No. CBBZ TD No-399 sheet 3/4).
Material & Labour for Point Wiring for one light Point/one fan point/ one call bell point, controlled by one switch with 1100 volts grade single core conforming to (IS:694 /1990) PVC insulated unsheathed 1.5 sqmm multi stranded copper conductor cable (FRLSH) with contineous earth wire of 1.5 Sqmm stranded copper conductor cable (FRLSH) PVC insulated unsheathed , drawn in and including concealed PVC conduit ,duly concealed to wall/floor or above false ceiling with fittings(ISI marked) not less than 20 mm dia (Color coding of wires shall be Phase, neutral and earth wire all as specified ) sunk Metal flush box with and including decorative polycarbonate frame for housing Modular Switches, sockets , fan regulators etc including white cover plate complete all as specified and directed. Note:- i) Cost of cutting chases of suitable girth where required on brick /concrete surface and making good disturbed surface shall be deemed to be included in quoted rates
All as per item No. 143 here-in-before but one 3pin/5pin 5/6 Amps socket out let on same board with other switches , with cables 1.5 sq mm size complete all as specified and as directed.
All as per item No. 143 here-in-before but one 3pin/5pin 5/6 Amps socket out let on independent board with other switches, with cables 1.5 sq mm size complete all as specified and as directed.
All as per item No 143 above but with 2.5 Sqmm PVC insulated FRLSH cable for 15 Amps power point complete all as specified and as directed.
S & F Switch Modular single pole, one way 6 Amps, 1 module 240 Volts AC complete all as specified and as directed. (Make Legrand Cat No- 673401/ Indo Asian Cat No-800000/ Cona cat No-9251 all as approved by GE.)
Supply and fixing switch modular , one-way 16 Amps, 1 module 240 Volts AC complete all as specified and as directed. (Make Legrand Cat No- 673411/ Indo Asian Cat No-800002/ Cona cat No-9386 all as approved by GE.)
Supply and fixing modular socket, 6A -2/3 pin combined 2 module ISI marked 230 volts, 50 Hz complete all as specified and as directed. (Make Legrand Cat No- 673452/ Indo Asian Cat No-800020/ Cona cat No-9316 all as approved by GE.)
Supply and fixing modular socket, 6A/16A -2/3 pin combined 2 module 230 volts 50 hz complete all as specified and as directed. (Make Legrand Cat No- 673455/ Indo Asian Cat No-800022/ Cona cat No-9416 all as approved by GE.)
Supply and fixing step socket type modular fan regulator 120/280 V , 100Watt complete all as specified and as directed. (Make Legrand Cat No- 673430/ Indo Asian Cat No-800043/ Cona cat No-9381 all as approved by GE.)
Supply and fixing ceiling rose surface bakelite 65x25mm dia having three terminals ISI Marked complete all as specified and as directed.
Supply & fixing Mirror light of make Cromption with Cat part No-LCL-07-CDL or equivalent in philips/ Havells / Shakti complete all as specified and as directed.
Supply and fixing LED lights fitting 1X18 watt ,4 ft with extruded aluminium housing heat sink, environmental friendly energy efficient translucent diffuser with LED light source,2400 Lumens( minimum) coefficient colour temp 6000°K to 6500 °K, surge protection range ≥ 2.5KV, voltage protection range-120-300VAC,2 years warranty ,system efficacy not less than140Lm/Watt for the fitting, power factor >.95,total harmonic distortion< 20% color rendering index>80, fixed on site with all accessories including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
Supply and fixing LED street light fitting 20 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including suitable size bracket for fixing complete all as specified and as directed.
Supply and fixing sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 12 way with 200 Amps rated busbar complete all as specified and as directed.
Supply and fixing MCB SP 06 to 32 Amp 'B' series 10 KA repturing capacity complete all as specified and as directed.
Supply and fixing MCB SPN 63 Amp 240 V AC 10 KA repturing capacity complete all as specified and as directed.
Supply and fixing Super energy efficient, BLDC type, Ceiling fan1200mm sweep, 5 Star rating, High speed (370 RPM), Remote with RF Technology complete all as specified and as directed.
Supply & Fixing exhaust fan, made of sturdy Engieering plastic complete with louvers shutter, AC single phase, 230 volt , 50Hz RPM 1200, Copper winding of sweep 300mm. complete all as specified and as directed.
S & F Gun metal gate valve 25 mm, with iron wheel head screwed both ends for GI Pipe and fixed complete all as specified and as directed.
Supply and laying in trenches/wall/floors GI tube medium grade 25 mm bore including fitting complete all as specified and as directed.
M&L for construction of valve masonary of size 600mm x 600mm x 600mm complete with MS sheet cover and locking arrangement including brick wall , plaster in cement mortar (1:4) including painting on metal surface of sizes 600mmx600mmx600mm complete all as specified and directed and as shown in drg.
Taking down old u/s cable & Supply and laying or fixing or passing through pipe, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade , cross - sectional area of 16 sqmm 4 core complete all as specified and as directed.
M & L for fine dry sand cushioning for underground cable by providing layers of sand 8 cm before laying and 15 cm deep after laying the cable including streching the cable (measurement to be taken after punning down consolidated thick ness ). complete all as specified and as directed.
Supply and laying , un-reinforced precast concrete cable cover, class LV, Type 1, flat, size 250mmX 150mmX40mm with breaking load capacity 200 KG complete all as specified and as directed.
Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. ( earth pit not less than 2.25 mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level connected by 4 mm GI wire as earth lead by means of brass nuts and bolt,thimbles check nuts, washers including concrete chamber of PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM (1:4) funnel with wire mesh, RCC pit cover of 320x320x80mm size (1:2:4) Type B1 using 20mm graded stone aggregate rainforced with XPM and charcoal, dust and common salt all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI wire upto 7.5 mtrs long with 15 mm dia light grade Gi pipe protection and watering pipe of GI 20 mm bore, medium grade, including all exavation and earth work and connecting the earthing strip to panel, including testing on completion complete all as specified and as directed. Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick rainforced with XPM weighting not less than 4kg/sqm in lieu of CI cover. (ii) Cost of additional GI wire more than 7.5 mtrs will be measured and paid seperately under relevant items.
Dismantling and taking down carefully U/S copper / aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified and as directed.
Dismantling and taking down carefully sub-main wiring/service wire of any size including wooden batten etc and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified and as directed.
Dismantling and taking down carefully existing DB’s any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified and as directed.
Material and labour for point wiring with 1.5 sq mm PVC insulated, unsheathed, stranded copper conductor (FRLSH) cable single core 1100 Volt grade in and including rigid PVC conduit medium grade 20mm dia or more ISI Marked surface / concealed conduit and conduit accessories and cutting chases of suitable girth where required on brick/concrete surface & making good disturbed surface,provision of Pressed steel terminal switch box with plastic laminated sheet 3 mm thick fixed with brass screw and washers along with 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLSH ) as earth wire connected with main common earth dolly complete all as specified and directed for the following :-
One light/fan/bell/exhaust fan point controlled by one, 01-way Piano type switch 06 Amp complete all as specified and as directed.
One 3pin 5 Amps socket out let on same board with other switchs, 01-way Piano type switch complete all as specified and as directed.
One 3pin 5 Amps socket out let on independent board controlled by one, 01-way Piano type switch complete all as specified and as directed.
All as per item No 168 above but with 2.5 Sqmm PVC insulated FRLSH cable for 15 Amps power point complete all as specified and as directed.
Supply and fixing switch piano flush type single pole, one-way 5 Amps, 240 Volts AC complete all as specified and as directed.
Supply and fixing switch piano flush single pole, one-way 16 Amp, 240 Volts AC complete all as specified and as directed.
Supply and fixing bell push piano flush type single pole one way 6 Amps complete all as specified and as directed.
Supply and fixing socket out let 5 Amps flush type complete all as specified and as directed.
Supply and fixing socket out let 5/6pin 5 Amp and 15 Amp flush type (multi) suitable for 240 Volt AC complete all as specified and as directed.
Supply and fixing in repair stepped type electronic fan regulator flush socket type 120W complete all as specified and as directed.
Supply and fixing batton/angle holder insulated bodywith back plate including 09 Watt LED Bulb complete all as specified and as directed.
Supply and fixing Bell ding dong AC 230/240 Volts single pole complete all as specified and as directed.
Taking down ceiling fan from existing building again refixing the same ceiling fan connecting up including provision of cable flexible 3 core of suitable size wire from ceiling rose to connect fan complete all as specified and as directed.
S& F in repair oval shape Bulk head Edge-lit LED fitting comprising with high brightness LED 10 watt, IP-67 protection all as per cat part No- LBHP-10-CDL of make Crompton / or equivalent make in philips / Havells as approved by GE.
S&F in repair Glaze Wall Light including 9/10 watt LED lamp ( B22), 6500 K , Cat part No- LHFOECE1TZ1B014 of make Havells or equivalent in Philips/ Crompton complete all as specified and as directed.
Supply and fixing sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 8 way with 200 Amps rated busbar complete all as specified and as directed. Make- legrand/ Hair/ Schneider
Supply and fixing MCB SPN 40 Amp 240 V AC 10 KA repturing capacity complete all as specified and as directed.
Supply and fixing sheet metal enclosure double door type for MCBs DB TPN (Triple pole and neutral) 240V AC 4 way with 200 Amps rated busbar complete all as specified and as directed. Make- legrand/ Hair/ Schneider
Supply and fixing MCB TPN 63 Amp 240 V AC 10 KA repturing capacity complete all as specified and as directed.
Supply and fixing sub main wiring two single core 4 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLSH ) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade surface on wall along with 4 Sq mm PVC insulated unsheathed copper conductor cable (FRLSH ) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion complete all as specified and as directed.
Supply and fixing in repair LED lights fitting 1X18 watt ,4 ft with extruded aluminium housing heat sink, environmental friendly energy efficient translucent diffuser with LED light source,2400 Lumens( minimum) coefficient colour temp 6000°K to 6500 °K, surge protection range ≥ 2.5KV, voltage protection range-120-300VAC,2 years warranty ,system efficacy not less than140Lm/Watt for the fitting, power factor >.95,total harmonic distortion< 20% color rendering index>80, fixed on site with all accessories including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
Supply and fixing in repair LED street light fitting 20 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including suitable size bracket for fixing complete all as specified and as directed.
Supply and laying or fixing or passing through pipe, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area of 16 sqmm 4 core complete all as specified and as directed.
NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.
UNOQ Private Limied
M/s RP AGRAWAL
jai shri balaji infratech
High Tech Metal India
RADHA ENTERPRISES
Bluemax Associate
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .