Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | l1₹2.3 LAccepted-Finance | l1 | Accepted-Finance Accepted being lowest bidder | |
| 2 | l2₹2.6 L+₹25,857 (11.2%)Rejected-Finance | l2 | Rejected-Finance rejected Being highest bidder |
Tender Value
Refer Docs
EMD Value
₹3,000
Closing Date
2 Dec 2021, 6:00 pmClosed
Executive Engineer
HPPWD Division Dehra
C/O Shed
2021_PWD_53963_8
EE Dehra letter No.7182-86 dated 10.11.2021
Open Tender
Civil Works - Roads
Item Rate
30 days
Dehra
Please refer to tender document
10 documents required · 10 mandatory
₹350
₹3,000
6 Feb 2022
26 Nov 2021
3 Dec 2021
26 Nov 2021
2 Dec 2021
26 Nov 2021
26 Nov 2021 - 30 Nov 2021
Amount
Earth work in excavation in foundation for all types of structures such as retaining walls, breast walls, culvers, drains, parapets and other similar structures in all kinds and classification of soil, including saturated soil comprising of ordinary mix soil, ordinary rock, hard rock, chiseling/ wedging out rocks (where blasting is prohibited) complete in accordance with the lines and dimensions shown on the drawings, including setting out, construction of shoring, bracing, removal of stumps and other deleterious materials and disposal of excavated material upto any leads and lifts including dressing of sides and bottom and obstructions necessary for placing the foundations, trimming, leveling ramming and watering bottom of excavation and backfilling in trenches with excavated suitable approved materials to the original surface in layers not exceeding 15cm (fifteen centimeter) compacted thickness including shoring and strutting and pumping or bailing out water (surface and sub-soil water) up to any depth and any quantum of water and cleaning of slush which may arise out during dewatering complete as per drawing and MORD Technical Specification clause 305.1 and as per the direction and the entire satisfaction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rates including Royality, Malkhana, Octroi, toll tax, GST,sales tax or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated concrete for plain cement concrete 1:5:10 (One cement isto five sand isto ten graded crushed stone aggregate 40mm(Forty millimeter) nominal size), in or under water in Retaining wall/breast wall and the like etcetera complete including pumping or bailing out water, dewatering (surface/sub soil water)including removal of slush which may arise at time of laying under water for all heights/depths and any quantum of water, including cost of form work and curing complete for 14 (fourteen) days and as per drawing and MORD Technical specification section 800, 900,1200 and 1600 and as per entire satisfaction and directions of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, toll tax, sales tax, GST or any other taxes imposed by the Government.
Back filling behind abutment Retaining wall/Breast wall, Wing walls and the like with approved granular materials complete as per drawings and MORD technical specification clause 1604.7 and section 300 as directed by the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates including Royality, Malkhana, Octroi, toll tax, sale tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mix and vibrated concrete for plain cement concrete 1:3:6(One cement isto three sand isto six graded crushed stone aggregate 10mm (Ten millimeter) nominal size), in or under water in parapets and the like etcetera complete including pumping or bailing out water, dewatering (surface/sub soil water)including removal of slush which may arise at time of laying under water for all heights/depths and any quantum of water, including cost of form work and curing complete for 14 (fourteen) days and as per drawing and MORD Technical specification section 800, 1200 and 1600 and as per entire satisfaction and directions of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals. The rates including Royality, Malkhana, Octroi, toll tax, GST,sales tax or any other taxes imposed by the Government.
Steel work welded in built up sections trusses and framed work, composed of beams, joists, channels, angles, tees, flats and connecting plates or angle cleats etc. as in trusses and trussed purlins, main and cross beams, hip and jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Toll Tax Sales tax, GST or any other taxes imposed by the Government:- In gratings, framed guard bars, ladders, railing brackets and the like ceiling frames etc.
Providing and fixing pre painted steel sheet in roofing over all steel trusses providing and fixing with hot applied metallic zinc coated of TATA/Sail/Reliance/Jindal/Steel pre painted single skin trapezoidal profile sheeting 0.60mm (zero point six zero millimetres) thickness having 1060 mm (one thousand sixty millimetres) cover width, overall width 1126mm (one thousand one hundred twenty six millimetres), 28mm (twenty eight millimetres) crest depth at 353+2mm (three hundred fifty three plus two millimetres) centre to centre crest distance, having two ribs at the centre for stiffening having crest depth of 2.5mm (two point five millimetres). The main crest width at top of 25mm (twenty five millimetres) and at lower 81mm (eighty one millimetres) base metal of cold rolled steel coil with zinc coating. Top coating with regular modified polyester (RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating of polyester to back coat of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetres) diameters with prepainted limpet and rubber washer complete with all accessories as required with EDPM seal complete as per HPPWD specifications or as directed by the Engineer-in-Charge, up to all floor level, including carriage of materials within all leads, lifts, and other incidental.The rates including Royality, Malkhana, Octroi, toll tax, GST,sales tax or any other taxes imposed by the Government.
VISHAL SHARMA WORK CONTRACT
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .